Printing Raw images

Similar Questions

• Adobe color with RAW images questions

  Hello

  I've had Photoshop for a long time now and I have a problem. When you look at the RAW images they have a green tint on the shadows (that's when them preview in Bridge, Photoshop and Camera RAW). This problem seems to be resolved by reducing the window and then making it full screen again a few seconds later. How ever after that, if I switch to another image and returned to the Green cast is there in the shadows.

  If I print screen you can see the problems in any other image editor the long side of a screen of the watch of the image "resolved."

  Anyone know how to solve this problem. I added a screenshot for comparrison to screen.

  Thank you

  Mark

  #CS5 extended 12.0.4

  

  P.s. There are lots worse images I can download if people want more information, or even just to see more of problem.

  It is not the never saw that a factory (for example, from Dell) color profile is not correctly formatted for general use (e.g. Photoshop).

  Try to uncheck [use my settings for this device (or add sRGB Color Space Profile.icm and make default) so that your system is configured to use the profile sRGB for the monitor and see if the problem persists.  I am betting it will be coherent by then, and the Dell ST2210 (HDMI) profile is a little confusing to Photoshop.

  -Christmas

• Resize raw Images? Need help!

  Do I need to resize my raw images when I convert Raw (Nikon D80 NEFF files) of 240 ppi to 300 DPI in TIFF processing?  I'll tell you.  I shoot in Raw, Nikon D80, convert to TIFF to perform the treatment.  The size of the image and the default PPP is 16,133 "X 10.8", about and 240 ppi.  When I shot with JPEG, perfect quality, same device, the file automatically opens with 12 "x 8", about and 300 ppi. "  I can resize the image when I made batch of Raw to TIFF of 300 ppp.  Is how important it?  Most of the photo I don't print not and if I print I usually specify printing size and the laboratory produced the images.  Any help would be appreciated.

  The 13th floor

  No, it will not matter, only the pixel dimensions of importance for the on-screen display

  or on the web. It is important, when you print, but most printers do everything

  the calculations for you when you enter a print size.

  JPEGs and raw images are the same size in pixels, so if you open

  a raw image into elements and go to Image > Resize Image size and value

  the resolution to 300 without resampling box checked, you will see that they

  are the same, so no need to change anything.

  MTSTUNER

• I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

  I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

  YYou want to save raw images, but not all? Is that what you mean? When you import into FVP you can select the songs you want and you can set the library in the Inspector to record the files on any player, anywhere.

• In the photos, RAW images not be open as RAW in photoshop

  Just downloaded images from my camera (Canon 7 d) for the photos and info of the image suggests that they were recorded as the RAW images, which is what I expected.  However when I go to open to edit in photoshop CS 6, the extension changed to jpg format.  This has only started happening since the upgrade to El Capitan...

  Unless there is a reason you want to use Photos, download the camera RAW

  Download files by using the application of Capture of Image or Canon apps (camera window DC8

  worked for me).  I think that Adobe Bridge CS6 download is broken in El Capitan and

  Adobe has no plan to fix it (they want to subscribe to the CC is why).

• I can not print background images.

  I select print background images already. But I can not print background images yet. (mac firefox 19.0.2). Although I'm not this page (http://support.mozilla.org/en-US/kb/how-print-websites)
  Please advice me to [email protected]. Thank you.

  Same problem here. There was no picture printing problem until the upgrade. Now, they won't print and it's ruin how I run my entire business. Image logo printing on the packaging of the lists, codes bars printing of shipping labels. I deleted the cache and restarted. I also tried other browsers and is it not the problem.

  Any thoughts?

  Thank you!

• How can I download raw images in the photos of el capitan?

  How can I download raw images in the photos of el capitan?

  What camera?

  What happens when you try?

  RAW + JPEG you use?

• Is there a driver compatible mac out there for printer Canon image class MF3240?

  Just got my first macbook pro. I am trying to connect my printer Canon image class MF3240 and discovered that they are not compatible. I've seen drivers on different web sites, but I am reluctant to use them.  Are there any safe over there, or do I need a new printer?

  OS compatibility

  Windows® 7, Vista, XP, 2000

  When imaging is done on the computer, and the manufacturer does not provide a driver for Mac OS X IN EVERYTHING, does support very difficult.

• XNET convert .vi (at the signal raw image)

  I use the Labview example program "CAN testify receiving (host) .vi" in 2013 to Labview to read information from the CAN in a NI 9146 ethernet chassis.  I see that information is passed through the vi 'CAN receive signals' and my host until it reaches the sub vi ".vi XNET Convert (to the Signal Raw image)".  When I opened this void / vi I can see the data in the 'data framework' control, but the remains of indicator 'data alert' to zero.  Does anyone have any ideas as to why I'm getting all the data?

  LabVIEW 2013

  NI 9146 expansion chassis

  Module CAN high-speed NI 9853

  Nevermind, figured it out.

• DPP4 will correctly process RAW images using a 70 d and Sigma 120-400 mm lens?

  Hi, I would like to buy a used Sigma 120-400 mm lens, as the cost will allow me to upgrade my Canon 300 mm f2.8 L IS lens to the mark 2 version. I also own a Canon 70-200 f4 L IS, Canon macro 100 mm f2.8 L IS, Canon 18-55 mm IS USM, Canon 70 two d cameras and a flash Canon 600 EX - RT. Unfortunately, I can't justify the purchase of a Canon 100-400 mm f4.5/6.6 L IS 11, as well as the upgrade of my 300 mm.

  I could not identify a RAW editor free alternatative of DPP-4, that will actually process RAW images from my 70 d cameras. I do not require the installation of fixed lens of DPP4.

  Jerrin1 wrote:

  Hi, I would like to buy a used Sigma 120-400 mm lens, as the cost will allow me to upgrade my Canon 300 mm f2.8 L IS lens to the mark 2 version. I also own a Canon 70-200 f4 L IS, Canon macro 100 mm f2.8 L IS, Canon 18-55 mm IS USM, Canon 70 two d cameras and a flash Canon 600 EX - RT. Unfortunately, I can't justify the purchase of a Canon 100-400 mm f4.5/6.6 L IS 11, as well as the upgrade of my 300 mm.

  I could not identify a RAW editor free alternatative of DPP-4, that will actually process RAW images from my 70 d cameras. I do not require the installation of fixed lens of DPP4.

  You can always use PLR (3 or 4) as your RAW converter when you use a Sigma lens. You just won't be able to use the digital objective Optimizer (DLO of Canon) on these files. DLO only supports Canon lenses.

  RawTherapee is a free RAW converter that should work with your 70 d, however I would recommend a few stick with DPP, if you do not need a correction of the lens. FWIW, I don't know if RawTherapee has lens correction or not in all cases.

• I am trying to print jpeg images simple and every time I try to print the file asking to save to the XPS format, and even then he used to feel. What continues?

  I'm going to print an image

  I select the picture and size and press on print
  The computer then tells me to save it to an Xps file, and it will not print it
  Is happening?

  Hello

  1. Have you tried to open the image in another application (other than stick them in a doc) as standard Windows Picture Gallery and printing from there?
  2. You have installed the Microsoft office program on your computer?

  I suggest to set the default printer and check the status of the issue.

  Change your default printer

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• RAW image conversion

  WLPG is not convert nikon raw (nef) images in of wmphoto. Any solution?

  For those who do not know and do not want to look up:

  WLPG is "Windows Live Photo Gallery"
  "NEF" is the Nikon RAW image format.  Nikon has even a codec download for it.
  The wmphotos... * DECODING * 'Windows Media Photos?

  Have you tried the codec?

• Canon RAW image files JPEG photo file conversion

  I need to convert my Canon RAW image JPEG files. Ive followed the guidelines recommended by microsoft help but it does not work. I opened with paint and tried to convert, but it used. I want to be abe to use these images and the mail and download on my network.

  I've a canon g11. normally all my images are in JPEG, I have chosen a different setting on the camera to take these specific pictures as the huge dimensions 2736 by 3648... to come as Canon RAW (CR2) files.

  any suggestions on how to convert to JPEG would be very appreciated! Thank you!!

  I need to convert my Canon RAW image JPEG files. Ive followed the guidelines recommended by microsoft help but it does not work. I opened with paint and tried to convert, but it used. I want to be abe to use these images and the mail and download on my network.

  I've a canon g11. normally all my images are in JPEG, I have chosen a different setting on the camera to take these specific pictures as the huge dimensions 2736 by 3648... to come as Canon RAW (CR2) files.

  any suggestions on how to convert to JPEG would be very appreciated! Thank you!!

  =================================
  Perhaps the following freeware programs will open your
  CR2 photos and you can save in a different format.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  XnView
  http://www.XnView.com/en/XnView.html

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Printing an image smaller size of my phone

  I have a HP Officejet 8600 Premium. my old printer would print a picture 4 x 5 when I printed my photo galary on my Iphone, but this computer prints all 8 x 10 how to print small images directly from my phone?

  Download HP Printer Control App from Appstore. The app will allow you to change settings as the image size and the paper size as well.

• Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  There is no Windows 7 driver for your printer, BUT...

  HP provide instructions that should get your printer working at least... follow them to the letter...

  BTW, the printer MUST be connected through a USB cable...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796821&LC=en&DLC=en&cc=us&product=75939&lang=en Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/