printing to hp deskjet 5650 extremely slow. Troubleshooting, checked the connections and rebootd did

Similar Questions

• Convert a physical box 2003 Server vm and the VM is extremely slow. Trying to connect again...

  Convert a physical box 2003 Server vm and the VM is extremely slow. Trying to connect again...

  This is my first time converting a physical box to virtual. This is Server 2003. The conversion took place and I try to connect to the box now but it's so slow. Currently, he sat to apply personal settings for almost 10 minutes.

  My boss has converted physical to virtual several times before and never said that he ran into something like this.

  Am I missing something? Any suggestions?

  I think that it is always looking for active directory. the newly P2V'ed will operate all IP settings. Therefore, you will need to wait until it has expired, and then enter the IP that is (ip, dns and etc.) above. the other way to speed things up would be to disconnect your network and the thing that your OS to expired immediately.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Captivate 5 - extremely slow reaction of the system for all actions

  I had 5 Captivate on my Windows XP Pro machine since July 2010.  I used heavily until March 2011, but it used VERY little since then (now Sept 2011).

  When I started yesterday at C5, it has been extremely slow in opening the application.  When I open a file I created in early 2011, stored on my C drive and less than 2 MB, it takes a few minutes to open the file.  Any action that I take in C5 takes MINUTES that the system to answer - if clicking on a slide to see in detail, by selecting an action, go to the next page, select an option in the menu bar - EACH action takes minutes to the point where even when I wanted to just remove some extraneous slides in a recent record It took me over an HOUR to do.  Curiously, she had no problem recording the actions of a site web - but put it up to C5 so that I can see and edit the file took minutes.

  What is happening and how to fix this?  Should I uninstall this version and reinstall?

  I also C5 on my MacBook Pro and it gives me problems now too - he actually told me that I had to re - install...

  Thank you!

  Hello

  I hope that you do not have the folder in Program Files? It is the application. Preferences must be in a folder associated with your connection profile. Sorry not to have access to a system of WIN XP for now. This file has this content for me:

  

  Lilybiri

• Install the printer driver for Deskjet 5650 when attaching to PC XP networking

  I can see the printer - but since not connect by USB, Windows 7 does not know which driver to install. I don't know the code for it - and the site HP tells me that Windows 7 has the driver. Anyone know the name of the driver? Other clues?

  Try the following: on the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, and then select series HP Deskjet 5600 (HPA) (HP).

• Extremely slow download for the El captain

  Hi did anyone know why El download Captain is still extremely slow - I mean it makes sense, while he was in high demand but now *?

  I have a fiber optic symmetric 250/250 and at the beginning of the download connection, everything seems smooth, no estimated that about 30 min download time, then to about 300 MB, things are * upward. And the loading screen does move, it is estimated to take about 2 days to download. I tried 3 different times, 2 times today and there is a time in 3 days.

  It is quite frustrating and I think to keep yosemite now.

  Try to download it in safe mode, or another admin account.

  Safe mode - subject

  Safe mode - Yosemite

• Extreme slowness of local area network and Time Capsule wireless speeds

  I have a time Capsule Airport Extreme 3 G with firmware version 7.7.3 I use for lan connections / wireless and backup of all apple devices that do not use the cloud. For the last month or so sometimes I ridiculously slow speed issues that cannot be remedied with any one of them that I have tried. Speed control on my i mac or wireless on any device in any location see accelerates it half of what I pay for. If I shoot a speed control to the back of the modem, everything is ok. If I shoot a speed check in a port on my machine Net Pro FVS318G safe with Airport extreme disconnected speeds are fine. But when the capsule is used the speed is slow. This happens not all the time. In fact this am that everything was fine, she just started about an hour or two there once again. And it normally clears up in a few hours on its own. It is like someone is inside my computer slows down I can't even do a backup on my i-phone when this happens.   I bought the thinking net machine that triple nat could help I'm not using the vpn option. I'm lost and open for suggestions?

  My mac i run El Cap v 10.11.4.

  Att Uverse 18 m 1 m

  Time capsule two years old.

  Check the speed of 1-6 m down issue when happening, 17-18 when well. done before also.

  Can you please describe your network topology?

• Lightroom after a few minutes of extremely slow. Also the cursor does not respond correctly

  Since a few days I can hardly use Lightroom more. A few minutes after you start Lightroom, it becomes extremely slow. The cursor will also each where I don't want that. If I'm looking for a photo it stops on any other photography. When I close Lightroom I and start it again I can use it for 3 or 4 minutes without problems, but it starts again. If I open it in Adobe Photoshop Lightroom Photographers I have no problem. It is fair to Lightroom. I hope someone can help me.

  What tasks you perform in these "minutes"?

  Specifically, you do a lot of brushing or healing spot?

• Airport Extreme 7,7,7 drop connection and internet high speed

  My Airport Extreme (6th generation) have had the serious problems of the internet, as said in the title I had problems with my internet connection, I checked if that was the problem of the modem to the beginning (D3.0 Ubee) which was provided by my Internet, Charter provider.

  I've had Airport Extreme for almost a year to 2 years now and since then, I had no problem with my internet until 7.7.7 update came.

  I updated my firmware and this is where my random internet connection problem started.

  My current contract with the Charter are their 60 Mbps (download speed) and 4 Mbps (download speed), during the first days since I've updated 7.7.7 connections was fine and then my internet has started to decline since a means 50-60 Mbps (download speed) to 0.1 - 2 mb/s (download speed), my download speed has remained a constant 3-4 MB/s (download speed). I have tried and used Opendns several times, he really did nothing.

  I tried to turn off both modem and Airport extreme for a couple of minutes and turn on their return, but he does nothing and just refers to an extremely slow speed.

  The only way I found to fix my problem to get my internet to 0.1 - 2 mb/s (download speed) back to its original state, I find myself to be a restore return settings on the Airport Extreme with my Airport utility by default whenever the problem returns (which contributes to a certain degree as it gets my back up to 50 internet-60 MB/s) then he drops down again).

  I wanted to restore to 7.7.6 or the latest version of previous firmware before 7.7.7 (not too sure what version of firmware, it was) but I can't find how to spend my Airport extreme to my Airport utility.

  My question is what could I do to fix this problem if the decommissioning of my extreme (I need instructions with this too), change some settings, get rid of the * thing and get a new router, or am I stuck resetting to the parameter by default whenever she acts upward.

  I use windows 10 for my laptop

  Thank you for your time

  Unfortunately, the first question that you encountered is the AirPort for Windows utility has not been updated since Windows 7. In addition, it is not supported for use with the 802.11ac latest versions of airport base stations. Then downgrade to earlier versions of the firmware for base station can be difficult, unless you can get hold of a Mac or iOS device.

  If you are ready to test Windows 10, here are the steps to do:

  • Open the AirPort for Windows utility.
  • Select the base and then station in the utility menu bar, select the access point > Download Firmware...
  • Click on the Download Version dialog box, where the current version of the firmware is listed.
  • You should now see a list of the firmware versions that are available.
  • Click on the one you want to get off at.
  • Choose either 'continue' to continue with the downgrade, OR click 'Cancel' If you decide not to do so.
  • If you choose to continue, allow the firmware to be downloaded, installed and the base station to turn.

• Firefox running slow, even after the reset AND reinstalled

  For the last several days that Firefox has worked really slow. When I open a new window it takes about 20-30 seconds to open an or if I try to load a site with flash (say for example of youtube) it takes time to load the site and you can not click anything, like back, address bar or even the X to close the window.

  I have scanned for viruses and found nothing. I thought it was my computer when Firefox started to slow down, but I opened Opera and Saferi to see what it looked like and they are fine. Works very well. If I restart the computer, Firefox works fine for say 2 hours before you start to slow down slowly again over time (about 5 hours later it is uber slow!). I also reset Firefox that again gave the same result as the computer restarts, very well for a few hours before starting to slow down again. Reinstalled Firefox, but again it's very well for a few hours.

  I don't know what to do. Firefox is my main browser, but I can't continue to use it like that because it takes forever to do anything.

  Create a new profile as a test to see if your profile is the source of the problems.
  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• HP Deskjet 3070 - How can I check the ink levels

  Hello

  I just received an online message say a word about the ink is low.  So I assume that it is the black which is low, most of my impressions are black text.  How can I check this and only change the cartridge that is low.  What I have to buy the same exact cartridges like the original or are there compatible practices there.

  The Panel screen control in my post above is not from the computer but on the printer itself.  Use the buttons on the printer to scroll through screens as indicated:

  1. From the Control Panel Home screen, press the Setup button ( ).

• How can I configure the printer on my Officejet 6500 a display more to the date and time?

  I replaced my wireless HP OfficeJet All In One printer 6400 with a 6500 has more wireless and want the default screen to have the date and time, just like my previous one. How am I able to do? I've set the date and time through preferences, but I want to be there when I turn on the printer.

  Hi Irvonne!

  Displays the date and time on the home screen of the 6500 a Plus isn't a feature of the unit is supported, I'm afraid.

  Thank you

• CS5, slow to get the "open" and "Save" over the network computer dialog box.

  I had this problem, since the suite has been installed, but recently got a lot slower. Whenever I have click on open or save, it takes 8-10 seconds just for the upcoming dialog.  CS1 has quick relief - I know it was hundreds of years ago, but I can't help but compare the two.  I have the same problem with InDesign and Illustrator. The suite is running on a Windows 7 computer with a home network, access files of a machine XP as a Buffalo Linkstation.  Once the dialog box appears, and I double click, the file is pretty quick to appear.  I did research online and I think that the problem was in the network or settings.  The network is fast, Windows Explorer has no delay in opening the search for files or other programs outside of the Creative Suite. I did an experiment to refine the problem - I closed Photoshop, disconnected the network cable and reopened the program.  WONDER - it was so FAST to open the dialog box for opening and saving files!  I closed and then Photoshop again, plugged the cable network Photoshop to and open back.  He was back at the slow opening of the dialog box.  Everything else in the programs works fine - no delay during the execution of the operations in one of the Creative Suite - it has to do with the network and how CS is looking for the files.  Can someone help me, I'm so frustrated - it adds unnecessary time to everything I do and I'm afraid to open and save files!

  Have you tried to work with the display of the dialog box at all under Windows 7 under the drop to organize (left side)? Also, is - one of your Favorites in this dialog box are pointing to something that might be offline?

• DeskJet 3755: Extremely slow printing, work stuck in the print queue

  Hey, I just bought a HP all-in-one Deskjet 3755 and put it in place and recorded. It is connected to my network, but I'm having a few problems.

  (1) the printer will only print jobs when it is connected to my computer by USB, even if I connected wireless.

  (2) print PDF print jobs EXTREMELY SLOWLY, over a minute for a page of text.

  Please do not just link me to support.hp.com pages... for some reason, they do not load on my computer (see the place completely empty, even if the HP site support work and charges).

  Thank you!!!

  Hey @anb9495,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the slowness of printing for the all-in-one printer Deskjet 3755. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to troubleshoot slow printing with your printer.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Portable operation extremely slow even after the system recovery

  I have a series of g laptop and on last week, it started running VERY slowly after the start. It came from nowhere, because it allows to work just fine the day before. So yesterday, I restored the factory setting and saved without previous files or documents. He worked as new for a few hours and then it suddenly becomes very slow. It's so slow that it freezes or it loads forever when I just click or click on the Start button. Pretty much everything I had there, it was iTunes malawarebytes, utorrent, steam and some other stuff that is were all on my computer before the problems began. Help will be greatly appreciated!
  
  Best regards, Nicolas

  Hi Nicolas,.

  Regarding the size of the hard drive, there may be problems with the recovery process if you are installing a drive of smaller capacity than one that was originally supplied with your laptop - the same size or slightly more is Ok.

  Unfortunately, I do not see the image of your link, but I think I know what you are referring.

  I guess than the previous you reinstalled the operating system is using the D Partition of hard disk recovery.  However, with a new disc, it will not be possible that the disc is not completely empty.  You will need to use a set of recovery DVDs to reinstall the operating system on the new drive - however, this procedure going to re-create the recovery on the new drive Partition automatically.

  All you have to do, once the new drive has been installed is to operate on the esc key when you launch Notepad to open the Start Menu.  Insert the recovery DVD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.  This will start the Recovery Manager and the whole procedure will be very similar to the previous method, you used - you will be prompted by the software when you need to change DVD to continue the process.

  Kind regards

  DP - K

• Transfers of extremely slow files on the home network 802.11 g

  Hello

  I have a home network with only two devices (more the router) on this subject.  The first is a portable computer, the second is a desktop PC / multimedia.

  My problem is that when I try to transfer a file from one computer to another, the transfer is terribly slow (for example, a 200 MB file will take 30 minutes).  I know that we cannot wait to be as fast as advertised wireless transfer rates by the manufacturer, but 100 kb/s is just too slow - especially when you consider that I can download files from the internet (on the home network, through the same router) to > 600 kb / s.  So, while I am very confused of what could be the problem, I'm pretty of course it is not a question of signal strength (and leaning me more towards a PC issue rather than a router problem).
  I looked online and saw people suggests to disable remote differential Compression and WIndows meeting space (which I did on both computers) - but my problem persists.

  Someone at - it any other suggestions?

  Thank you!

  Hi Enrique.

  If you are still experiencing slow I suggest to post your problem with your installation using the link below:

  Forum Windows 7 IT PRO networks

  hope this helps,

  B Eddie