Problem activating Windows 7 64 bit.

Similar Questions

• I can active windows 7 32-bit to 64-bit key?

  Key to 32 bits on use Dreamspark Premium for Windows 64 - bit version?

  Hello

  I see 2 key on my premium Dreamspark, include Win 7 pro 32-bit and 64-bit. I can active windows 7 32-bit to 64-bit key?

  Thank you.

  Hello

  After the question in the link mentioned below for assistance.

  Microsoft DreamSpark - Support

  Hope this information helps.

• Satellite P100 - 347 (PSPA6) and Conexant audio problem in Windows 7 64 bit

  He is a [old problem | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=175972#175972] which seems to have affected many people.

  Conexant HD Audio (hardware id: HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31 & REV_1000)

  There has been no official driver published this work in Windows 7 64 bit. It works fine in 32-bit, windows 7, and using different drivers from other sources + partial + fix can be found.

  Using these drivers:

  [Audio 4.8.0.0 | http://209.167.114.38/support/Download/files_downloads/pspa1c/vista/Audio4.8.0.0.zip]
  [sp35683 | ftp://ftp.hp.com/pub/softpaq/sp35501-36000/sp35683.exe]

  and some of the advice [here | http://laptopforums.toshiba.com/t5/Windows-7/Windows-7-64-bit-drivers-for-P100-P105-Users/m-p/67516], it is possible to get the proper functioning, but * only * when using the S/PDIF (HD) audio output. When the S/PDIF cable is removed the internal speakers make noise for a fraction of a second, then silence.

  I tried everything and this issue has been around for months and months, but no perfect solution seems to exist. I was wondering if there is a way to update the drivers of the HD Audio Controller, integrated in Windows 7. Or maybe a hack that allows the internal speakers continue to work (they work for one second!)

  Please, any help on this would be greatly appreciated

  Hello

  The Satellite P300 and P500 Satellite supports the audio chip Conexant too audio driver published for these two models of laptops should work on Satellite P100!

  Please check this!

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• PROBLEM WITH WINDOWS 7 64 BIT & PRINTERS

  Hello

  My company is replacing all of our window xp machines and we head to widows 7 64-bit. We currently have a print under windows 2003 server.
  I downloaded the universal readers of hp windows 7 64 bit, the new drivers for a printer, goes \\servername, view the remote printers on a windows 7 64 bit pc, and adding drivers 64-bit configuration. On the print server, I can see in this printer, additional drivers x 64 windows XP and Windows Server 2003 driver installed.
  My first question is that correct? Shouldn´t I see something like windows 7?
  After that if I try to add the printer to the pc windows 7, is going to add a wireless network..., select a shared printer name, I always get the error as it is impossible to connect to the printer. Operation failed with error 0x0000007e.
  However if I try add, using a tcp/ip address or the hostname of the printer is installed ok.
  Is it possible that something to do with the driver? It is not picking up the right one?
  Thanks and rgs,
  Ricardo Mendes

  Hello

  This solution seems to have worked for multiple users.

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  To connect to your server, start "regedit" and go:

  HKLM\SYSTEM\CurrentControlSet\Control\Print\Printer

  And remove the key, "BIDI" again try to install your printer, it should work.

• Blue screen problems with Windows 7 64 bit

  It's my first time ever to come here so go easy on me if I have not posted correctly haha.
  Anyway, I came here to see if anyone can help if all goes well shed some light on the issues I'm having. I get these blue screens recently and below I have posted some of the recent issues. To follow and the State for the record that I am aware of a RAM problem that I'm trying to hash it out, but it seems not matter what I always blue screens. I am considering a complete replacement of the RAM, but before you start spending money I don't have I want to get some opinions more. I'll post what I can which may or may not help but any constructive contribution will be GREATLY appreciated.
  
  
  
  
  It's happened today:
  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information about the problem
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF960002C66DC
  BCP3: FFFFF8800E988CB0
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
  Bucket ID: X64_0x3B_win32k + 2566dc
  Information about the server: d597ded6-f553-4a5b-962c-9fef9d479eb8
  It took place on 26/04/13:
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 101

  BCP1: 0000000000000031

  BCP2: 0000000000000000

  BCP3: FFFFF880009E9180

  BCP4: 0000000000000001

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_CLOCK_WATCHDOG_TIMEOUT_4_PROC

  Information about the server: d179de1f-a3f4-4303-8fe7-d91692670210
  This happened on 24/04/13:
  
  
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 1a

  BCP1: 0000000000041790

  BCP2: FFFFFA800135CB70

  BCP3: 000000000000FFFF

  BCP4: 0000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_0x1a_41790_nt! MiDeleteVirtualAddresses + 40330

  Information about the server: 407de12b-0f29-45e1-a934-e63146fe2f26
  I don't know if this is necessary, but I used my Steam to obtain more detailed information on my system. All that may be necessary let me know.

  Processor information:

  Seller: AuthenticAMD

  Speed: 2511 Mhz

  4 logical processors

  4 physical processors

  HyperThreading: unsupported

  FCMOV: supported

  SSE2: support

  SSE3: support

  SSSE3: unsupported

  SSE4a: support

  SSE41: unsupported

  SSE42: unsupported

  Version of the operating system:

  Windows 7 (64-bit)

  NTFS: support

  Crypto Provider codes: supported 311 0 x 0 0 x 0 0 x 0

  Video card:

  Driver: NVIDIA GeForce GTS 450

  Name of the DirectX driver: nvd3dum.dll

  Driver version: 9.18.13.1422

  The DirectX driver version: 9.18.13.1422

  Driver date: March 14, 2013

  Desktop color depth: 32 bits per pixel

  Monitor refresh rate: 59 Hz

  DirectX card: NVIDIA GeForce GTS 450

  VendorID: 0x10de

  Device ID: 0xdc4

  Number of monitors: 1

  Number of logical video cards: 1

  No SLI or Crossfire detected

  The main screen resolution: 1680 x 1050

  The desktop resolution: 1680 x 1050

  Main display size: 23,35 "x 14.57" (27,48 "diag)

  59.3 cm x 37.0 cm (69.8 cm diag)

  Main bus: PCI Express x 16

  Main VRAM: 1023 MB

  Supported MSAA modes: 2 x 4 x 8 x

  Sound card:

  Audio: speakers (VIA A high-definition

  Memory:

  RAM: Mb 6143

  Various:

  INTERFACE language: English

  Media type: DVD

  Total disk space: 152586 MB

  More great free block on the hard disk: 26355 Mb

  Humility101

  Sorry just missed your post.  22 of the 35 were directly related to the corruption of memory
  

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617

• Battlefield 1942 problems with windows 7 64 bit

  I have install BF 1942, well, but when I click on any button (single player, multiplayer, game, custom, etc.) the game freezes and crashes to the desktop... ran the game in win xp sp2 mode, still nothing... have run in administrator mode, still nothing... even tried downloaded... Windows XP mode which does not yet detect my video card / sound , so therefore does not load the game cause the value default of those charge are like a map of vid 1 mb ;(

  someone has an idea on how to get from 1942 to work on windows 7 64 bit?

  -------------

• Problems with Windows 7 64 bit IE

  I have windows 7 64-bit os and IE9 has been installed when I did the transfer of windows as a 32-bit I want to uninstall IE9 and instal IE11 but can't get rid of IE9 not tried the ususal, but it does not show even in programs and features to uninstall when I downloaded IE 11 it crashed not saying don't no need for my computer any help please

  Hello

  It is listed under "Installed updates"; delete it from there.

  "How to install or uninstall Internet Explorer 9?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  To uninstall Internet Explorer

  The following instructions apply to Windows 7 and Windows Vista.

  1. Click the button start , type programs and features in the search box and then click the display installed in the left pane updates.

  2. Under uninstall an update, scroll down to the Microsoft Windows section.

  3. Right-click Windows Internet Explorer 9 and click on uninstall and then, when you are prompted, click Yes.

  4. Click one of the following:

     • Restart now (to complete the process of uninstalling Internet Explorer 9 and restore the previous version of Internet Explorer).

     • Restart later

  See you soon.

• Problem installing Windows 7 64 bit

  Bought a Windows 7 home premium 64-bit, the laptop does not allow installation needs, 32-bit, how can I fix this with out having to go buy another package with 32-bit?

  Laptop is a HP Pavillion DV6 notebook currently loaded with vista.

  I have an another complete windows 7 64-bit office cd that is loaded on my other laptop I install using this cd and just put in the new serial number for the package first home?

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Problem activating windows 7 after a downgrade from windows 8

  I bought a computer with windows 8.1 pro installed and I'm trying to downgrade to windows 7 pro.

  • The license key for 7 I am using is used on another pc downgraded, as well as the pc that it originates
  • I talked to 2 different people at Microsoft. The first says windows 7 must be uninstalled from the previous computer until I can activate it. Is this true? What the point of having a windows 8 license then?
  • The second person told me to contact the computer manufacturer to obtain a license of windows 7. This is not an option for me.

  Any advice would be greatly appreciated.

  Joren-

  I bought a computer with windows 8.1 pro installed and I'm trying to downgrade to windows 7 pro.

  • The license key for 7 I am using is used on another pc downgraded, as well as the pc that it originates
  • I talked to 2 different people at Microsoft. The first says windows 7 must be uninstalled from the previous computer until I can activate it. Is this true? What the point of having a windows 8 license then?
  • The second person told me to contact the computer manufacturer to obtain a license of windows 7. This is not an option for me.

  Any advice would be greatly appreciated.

  Joren-

  OEM Windows 8.0/8.1 Professional (Major) comes with downgrade rights.

  Windows 8.0/8.1 Professional Retail doesn't.

  For OEMS of Windows 8.1 a single system locked preinstallation SLP key is a unique 25-digit product key integrated in the UEFI BIOS.

  For Windows 7 OEM SLP credits is entered from the installation media. This key works only if the markers in the BIOS are present, it is that the BIOS is checked by the OEM. For this reason, you need to an OEM license and support OEM installation.

  See here for more details:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-7/the-OEM-or-retail-license-and-product-activation-Windows-Vista-7/

  Without details on your system and OEM model we cannot help you further.

• Satellite P300 - problem on Windows 7 32 bit card reader

  Hi guys,.

  installed Win 7, 32 bit. Installed drivers of the devices of ll, no errors in Device Manager.

  But by Windows session (start / stop) I can only use the O2 card reader (SDHC Sandisk 16 Gb) once.
  No matter if I just pull out the card or use the "Windows cleaner" way to eject of the plateau, the next time this same session if I insert the card, without drive letter is created in Windows Explorer.

  If I look in Device Manager then, an error 38 with exclamation point is presented, based on "pilot has been loaded before but not discharged.

  Then I can just have a glance at the card again if I have first to restart Windows. Becoming a very annoying problem, because I tend to have the laptop on standby, do not close normally.

  Is there advice here?

  Hey,.

  Have you tried to update the driver of the card reader? If not you should do this because normally the error code 38 means that the driver can t be loaded for this device correctly. Resettlement should work
  Read here for more details: http://support.microsoft.com/kb/310123

  You can download the latest version here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck! :)

• Problem activating Windows XP Pro on a Dell Dimension 4600, which originally had XP Home

  I have some difficulty to activate MY PERSONALLY PURCHASED VERSION of Windows XP Pro on a Dell Dimension 4600 workstation that initially provided with XP Home.  I have TWO Codes of 25 character key true = 1 The printed on the sticker on the computer AND the one supplied with the disk I bought for my laptop that was stolen last week.  I entered two key during the windows process codes activate and they the system tells me invalid or incorrect product key code.  I WAS talking with a Microsoft Tech Rep on the phone trying to solve this problem and has been disconnected when put on "Hold" and now cannot get through to a real person again.  CAN SOMEONE ' ONE/SOMEONE' HELP ME PLEASE?

  Hello

  Both your XP, the laptop and the Dell operating systems will have been oem licenses. OEM licenses are tied to the computer that they were originally installed on. In regards to the Pro license you can see in your report where is says Windows license Type: OEM System Builder.

  The only XP version that can be legally charged to your Dimension is one that has been provided with it by Dell, i.e. the XP Home license.

  activation of character for home 25 codes do not work with the Pro, the reverse is also true.

  Tricky

• Print Spooler Problems in Windows 7 32 bit

  I just upgraded my Dell Inspiron 1526 Vista Home Premium 32-bit, that I never had a problem with, for Windows 7 Home Premium 32 bit. All my files and programs were very good, but my printer settings seem to be spoiled. I get the message that the print spooler stops so unexpected and got the error code: 0x000006be. I saw on a forum Vista how to go manually turn on the print spooler and ensure that it was in automatic mode. Then, I started it, and he said that it was automatic, but I tried to install my printer again and it stopped again. Help, please. For now, I'm not so sure that's a good idea to upgrade. And the printer is brand new - it's a Canon PIXMA MP 250. I just bought a few weeks ago and had no problems with it in Vista. Thanks for your suggestions, you can give.
  

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem activating Windows Pro 8

  Hey guys :)
  so I bought this reduction that comes with ownership of Windows 7 and Windows 8 Pro prior to January 31, 2013
  I installed it on my old computer and I am now used

  When I bought a new computer, I spoke with one of the employees in line and he said I could re - use my activation key once I have remove windows 8 of the other computer.
  Which is exactly what I've done
  The problem is not activate!
  I'd appreciate any help :)
  Thanks in advance :D

  You will need to reactivate by phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

  Make sure that the machine on which you have transferred has a license of qualification.

  . To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.

  If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8. Help with the activation process, contact technical support.

• Satellite U500 - problem installing Windows 7 64 bit

  Hello

  I just bought a U500 laptop and am trying to install the 64 bit version of windows 7.
  It is obtained in the section "Installation program starts Services" and comes with a Setup error saying that the laptop needs to be restarted.
  When it is restarted it comes up once again with the error and keeps looping through.

  7 the window was on the HARD drive when I bought and was the first option to install when the laptop started upward. There is a recovery disk, but it degrades to XP, something, I'm not keen. I tried to reboot in safe mode, all three options, nothing helps.

  Any help would be much appreciated.

  > the window 7 was on the HARD drive when I bought and was the first option to install when the laptop started upward. There is a recovery disk, but it degrades to XP, something, I'm not keen

  I put t understand that said you the Win 7 64 bit was preinstalled, but the recovery disc contains Win XP?

  As far as I know, the most recent series of laptop is preinstalled with Win 7 64 bit and the recovery disk contains the Win 7 32 bit there is also a preinstalled Toshiba Recovery Disk Creator that allows you to create the own recovery with Win 7 64 bit OS disk

  However, if the laptop was preloaded with Win 7 then a HARD drive recovery option should be available also. Turn on the device, press F8, select Repair computer mu then Toshiba HDD recovery
  This should start again Installing Win 7 64 bit