Problem adding toolbars

Similar Questions

• I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?

  I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?

  Hey paulc6148125,

  Please try the mode settings different button in Adobe Acrobat Reader DC-> leModifiermenu-> preferences-> general categories.

  Kind regards

  Nicos

• Problem adding video to Captivate slide

  Hello

  I'm having a problem adding a video file FLV to Captivate. Basically, after that I have published on a SWF file, the video does not appear on the slide at all. It's just empty.

  After searching for a bit, I found that the file FLV MUST include * metadata *.

  However, I added medatada with VLC Media Player, and it still shows the same behavior. There's a certain * amount * metadata? Is there a * type * of metadata without which the video not displayed?

  Adobe help thread talking about what we call the ' Kit Flash video '-which is a stand-alone product or one extension of another product? Is it free? Are there any other free alternatives?

  I'm just very confused.

  Thank you!

  I ended up answering my own question. But just in case this helps someone else, I'll post my solution.

  Essentially, I just re-created the video in MP4 format. Then I used MetaZ (for Mac) to write metadata in the video. Finally, I imported the video as an object and when I posted the video, Captivate it transmutes to the FLV format needed.

  The video is now displayed correctly.

• Problem adding a folder of images

  Hi, I have been a user of Lightroom 5 for a while now and everything was absolutely perfect, but I now have a problem adding a folder to put the images in LR.  I checked using "Finder" that the images are still there on my external hard drive, which fortunately they are, but when I navigate to that folder in the section "Add files" it shows no images at all, and the 'Import' button is grayed.  There is a new catalog, I created for 2015 customers otherwise the only other change is that I have been preselected a few images using photomechanical moved selected files into a new folder created by me.  Otherwise I have not changed anything else from my usual game to the top.  As a validation test, I tried adding several different sets of RAWS in different folders (which I have previously worked on in other catalogs so I know they were fine before), but I'm having the same problem.  Please can anyone help shed light on what clearly is a bit a killer of productivity right now!  Thank you very much

  DJ - it's a Canon 5 d Mk III, using Lightroom 5.7, and the images are all of the FIRST.  All images have been imported from the map in a folder on my external hard drive, before I used photomechanical to them for review.

  I am pleased to say that the problem is now solved.  I found another thread in forum with many people have exactly the same problem and with various corrections that have worked for them but not for me.  Then I found one that worked for many people - just expand the Destination panel and hey presto - all images appeared.  How weird randomly - I do not know how it was fixed, but there, so now I'm still productive.

  Thanks again to you and Joe for all your interest and your willingness to help - its much appreciated!  I'm now going to edit some pictures

  Nadine

• Added toolbar folder icon problem when locking taskbar

  I like the feature to allow you to create a toolbar on the toolbar effectively the content of the folder shortcut to different places.  Not sure if this is a new feature of 7, but I just found and take advantage.

  I have two, and I've resized the so that only the text of the toolbar and ">" appear.

  The problem I have, is that when I chose to lock the taskbar, everything is resized, and I get two full or partial folder icons that come into view.  These icons represent the child folder under the folder main toolbar choice.

  As an example, I have a folder called "Source Files" I created the toolbar, so it reads Source files > in my taskbar.  When I lock the taskbar, then I get a partial folder icon to the right of ">" that links to the first folder in the Source files directory.

  Not the end of the world, but sticky.

  Does anyone have a suggested fix?  Something in the registry, perhaps?

  Wow, I'm not, but I could have found the answer to this annoying bug.  It worked for me and I was able to reproduce several times.

  my setup: I have my toolbars crumpled to the left, right next to my Start button.
  with the taskbar unlocked, I moved my whole bar vertically on the left side of my screen, so that my departure the button appears in the upper left corner of my screen and my toolbars align underneath.
  I noticed when I did that I could see partial icons when my taskbar has been unlocked (which wasn't the case when my bar was horizontal at the bottom of my screen).
  I have re-scrunched up all my icons while my bar is vertical, moved my bar together down again once (horizontal) and closed the taskbar.  not more partial icons (at least for me)!

• Adobe Reader - added toolbar: example hello world

  Hello world

  I would create a "toolbar button" Adobe Reader that supports all version of it.

  After a long search for this on the web found an article suggesting that this can be done with one of the 2 methods.

  1 acrobat Javascript.

  2 acrobat Plugins.

  1 acrobat Javascript:

  I managed to create a "toolbar button" in Adobe Reader with script placed in "C:\Program Adobe 10.0\Reader\Javascripts" below

  Script:

  function helloWorld()

  {

  App.Alert ("Hello World");

  }

  app.addToolButton({)

  cName: "helloWorldBtn", / / name of your button

  cExec: "helloWorld()", call //Function

  cLabel: "Hello World", //The text on the button

  cTooltext: "Say Hello World", //The text to help

  cEnable: true

  });

  Problem with Javascript:

  The only problem facing the implementation of my Javascript script is "I couldn't call a method ActiveX or a DLL of this Javascript.

  I tried to create new ActiveXObject in code, but it thorws runtime error saying that it ActiveXObject is an unrecognized keyword. (The same "new ActiveXObject" works very well in normal Javascrirpt.

  2 acrobat Plugins.

  I couldn't find a good sample of "Helloworld" for the creation of a toolbar of the sample on the internet. I think, Plugins, that it would be easier to call the method other DLL by adding a reference or on COM.

  Could someone help me is done with a more simple to make with this best sample. Please don't recommend the SDK samples, I don't really understand anything out of it.

  If we can create the toolbar with c# or VB, it would be better for me.

  Hope you got my problem. Thanks in advance.

  Please come back to me if one of my guesses to are wrong.

  Yes, these are the two ways to create a button in toolbar - JavaScript or Plugin.

  You are also right that you can't do anything with ActiveX or DLL from Acrobat JavaScript - which is the same engine of JavaScript in Mozilla/FireFox.  However, add many browsers to additional custom objects (for example, ActiveX), which may be what you think of...

  Plugins are written in C/C++, and they are documented in the Acrobat SDK kit.  You will need to download what to build.  It includes documentation, sample code, etc.  HOWEVER, be aware that, in order to develop a plugin for the reader, you must obtain a license from Adobe.  There is a cost and process for this license, and details are provided in the SDK.

• Problem adding rows in a table

  Hi all

  I'm having a strange problem by adding the lines of the table here. Everything seems to be in place. But when I click the button nothing happens. I worked on tables more complex and added lines safely, but I don't understand what is happening here. I saved the dynamic XML form, interactive form, I put the paging of expandable lines. But heck! It does not at all. I'm totally confused. More more while I drag the table from the object palette, an error and LC closes its doors. But when I click on the table on the toolbar and in the inserted table for it then it shows no errors. What is going on?? Any help is greatly appreciated.

  Script: form1. Page1.Subform1.Button1::click - (JavaScript, client)
  Form1. Page1.Subform1.Table1.Row4.instanceManager.addInstance (1);

  Thank you.

  Sidonie.

  Hi Francine,.

  The version that I have downloaded from Acrobat.com was registered as Static.

  When I saved as a dynamic in the file save as dialog, it worked perfectly. https://acrobat.com/#d= * KWIuuYfTYgasrEr4ERRaw

  Good luck

  Niall

• Problem adding video to iTunes 12.5.1.21

  I've recently updated iTunes to 12.5.1.21. Now, when adding files mp4, iTunes is not placing them in the videos section as before but instead adding them to the music and the ability to change the type of media for movies or TV series does not appear in the tab options to read the information, it is only allows you to change other types of audio files. What is happening with several files. Does anyone know a solution to this problem?

  I tried marking as movies files using the marking software. Files now appear in the correct location in iTunes but will not play again. I use iTunes on windows 10. Also trying to read the videos, instead of display the duration of the video it says LIVE.

• Problems adding the Yahoo account to Messages

  When I try to add my Yahoo account for Messages I get this message but the account is not added in preferences accounts. Any ideas how I can add my Yahoo account to Messages?

  

  Hi dcwy,

  There is a lightweight process is troubleshooting this small setback. If all goes well, this should do the trick!

  Thus, you must connect to your yahoo account (using a browser like Safari)

  Go to settings > account security > passwords for the App manage (create a new password here)

  Then jump on the mail app which is the application of default e-mail on your Mac, and he must ask your new password.

  Now, when you open iMessage, this app should also request your password or if you click on "available yahoo" it should ask for a password and you put this password and it will work. If all goes well.

  Please reply if this is problem.

  Good luck!

• Custom bitmap focus problem with toolbar

  Hi all

  I'm new development of BB.

  I have screen with the title bar and after a toolbar customized

  The custom toolbar contains 3 bitmaps in the side chain and the left text right.

  Logo 'text'---> title bar

  Image1 image2, image3 "screenName"---> toolbar custom

  ListField

  Three images are created using the bitmap.

  I get the focus on the full range.

  But I want to focus on the first image, image1 when the application runs.

  If the user navigates the screen using the keyboard, change of focus to the next image, which is image2 and so on.

  How can I do that.

  I use the Blackberry API 4.2.1

  My current code for the toolbar is like that

  package com.pebbletalk.blackberry.ui;
  
  import com.pebbletalk.blackberry.defines.PTDefines;
  import com.pebbletalk.blackberry.utils.CustomFont;
  
  import net.rim.device.api.system.Bitmap;
  import net.rim.device.api.system.Display;
  import net.rim.device.api.ui.DrawStyle;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.Font;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.ui.component.BitmapField;
  
  public class ToolBar extends Field implements DrawStyle
  {
      private int fieldWidth;
      private int fieldHeight;
      private int backgroundColor;
      private String toolBarName = "";
  
      private Bitmap homeIcon = Bitmap.getBitmapResource("go-home-1_16x16.png");
      private Bitmap searchIcon = Bitmap.getBitmapResource("search-1_16x16.png");
      private Bitmap refreshIcon = Bitmap.getBitmapResource("reload-1_16x16.png");
  
      public ToolBar(String toolbarName)
      {
          super(Field.FOCUSABLE);
          fieldHeight = Display.getHeight()/10;
          fieldWidth = Display.getWidth();
  
          // Setting background color to white
          backgroundColor = Color.BLACK;
  
          toolBarName = toolbarName;
  
      }
  
      public Bitmap getHomeIcon() {
          return homeIcon;
      }
  
      public int getPreferredHeight()
      {
          return fieldHeight;
      }
  
      public int getPreferredWidth()
      {
          return fieldWidth;
      }
  
      protected void layout(int arg0, int arg1)
      {
          setExtent(getPreferredWidth(), getPreferredHeight());
      }
  
      protected void paint(Graphics graphics)
      {
          int height = this.getPreferredHeight();
          int width = this.getPreferredWidth();
  
          int left = this.getLeft();
          int top = this.getTop();
  
          graphics.setColor(backgroundColor);
          graphics.fillRect(0, 0, width, height);
  
          //graphics.drawBitmap(left, top, width, height, homeIcon, 0, 0);
          graphics.drawBitmap(left, 5, width, height, homeIcon, 0, 0);
          //int currentX = graphics.getTranslateX();
          //int currentY = graphics.getTranslateY();
          int homeIconWidth = homeIcon.getWidth() + 5;
          graphics.drawBitmap(homeIconWidth, 5, width, height, searchIcon, 0, 0);
          int searchIconWidth = homeIconWidth + searchIcon.getWidth() + 5;
          graphics.drawBitmap(searchIconWidth, 5, width, height, refreshIcon, 0, 0);
          int refreshIconWidth = searchIconWidth + refreshIcon.getWidth() + 5;
  
          CustomFont titleFont = new CustomFont(Defines.TOOLBAR_DASHBOARD_TITLE_FONT_FACE, Defines.TOOLBAR_DASHBOARD_TITLE_FONT_SIZE, Defines.TOOLBAR_DASHBOARD_TITLE_FONT_STYLE);
          graphics.setFont(titleFont.changeFont());
  
          Font currentFont = graphics.getFont();
          int textLength = currentFont.getAdvance(toolBarName, 0, toolBarName.length());
          textLength += 5;
          System.out.println("width : "+ width);
          System.out.println("refreshIconWidth : "+ refreshIconWidth);
          System.out.println("textLength : "+ textLength);
          int remainingWidth = width - refreshIconWidth;
          System.out.println("remainingWidth : "+ remainingWidth);
          int startPosition = remainingWidth - textLength;
          System.out.println("startPosition : "+ startPosition);
          int newX = refreshIconWidth + startPosition;
          System.out.println("newX : "+ newX);
          //int xPosition = width - refreshIconWidth;
          //System.out.println("tool x : "+ xPosition);
  
          graphics.setColor(PTDefines.TOOLBAR_DASHBOARD_TITLE_COLOR);
          graphics.drawText(toolBarName, newX, 5, (DrawStyle.RIGHT | DrawStyle.LEADING) );
      }
  }
  

  and my toolbarScreen code is

  MainScreen mainScreen = new MainScreen(Screen.NO_VERTICAL_SCROLL);
  
          //MainScreen mainScreen = new MainScreen();
  
          // add custom title bar
          mainScreen.add(titleBar);
  
          VerticalFieldManager verticalFieldManager = new VerticalFieldManager(Manager.VERTICAL_SCROLL | Manager.VERTICAL_SCROLLBAR)
          {
              public void paint(Graphics graphics)
              {
                  graphics.setBackgroundColor(Color.WHITE);
                  graphics.clear();
                  super.paint(graphics);
              }
              protected void sublayout(int maxWidth, int maxHeight)
              {
                  int displayWidth = Display.getWidth();
                  int displayHeight = Display.getHeight() - titleBarHeight;
                  super.sublayout(displayWidth, displayHeight);
                  setExtent(displayWidth, displayHeight);
  
              }
          };
  
          //now add everything in the verticalManager
  
          // add custom toolbar
          mainScreen.add(toolBar);
          mainScreen.add(new SeparatorField());
  

  Please help me to solve my problem.

  Remember that the BlackBerry smartphone focuses on a field, not a picture.  Your toolbar is only a field, so one thing to focus on which is the Blackberry's.

  You have two choices:

  (a) change your toolbar to be a Manager and have several fields that it contains.  You can make a HorizontalFieldManager and assuming that the other things are set correctly (in particular the width of the fields that you add) this will do what you want.

  (b) substitute events in development movement in your toolbar to make it appear focus is moved.

  I think the second option is more difficult, especially when you start to take the touch screen into consideration.  However, with the second option, you get a much easier control over the look of your toolbar.  But I'd go with the first one, as I think it is easier for new programmers.  Initially, I wouldn't get to hung up on the appearance of the toolbar, get it works the way you want and then try to get it looking right.

• Problem adding datastore lun in exsi home

  Here is the Delima we are having. We have 3 exsi as a cluster host. the names are exsi1 (version 4.1), exsi2 (version 4.1) and exsi3 (version 5.1). We already have 6 data banks on a logical equality 6100 san connected via iscsi. guests 3 see these data stores no problem. I created 2 new stores of data on equal logic ensured in respect of the 2 TB for exsi 4.1. Add the SCSI ID 3 for the volumes. I can analyze and see the new LUN 2 on exsi2 and exsi 3. for some reason, no matter what I do exsi 1 can not see. Verified dynamic discovery on with the ip address.  I even tried manually adding targets ISICI to exsi gives me an error

  Call 'HostStorageSystem.AddInternetScsiStaticTargets' of object ' system of storage-137 "on vCenter Server"MDSI"failed."

  Operation failed, the diagnostic report: iScsiLibException: status (80000000): unknown error. Message = IMA_AddStaticDiscoveryTarget

  Any ideas would be very appreciated. Im am new to this kind of thing was deposited on my lap during the last person left IT so apologize for any ignorance on this.

  Guy, I finally got. RAM disk was full when I deleted the complete disconnect came right up. Sorry to bother.

• Problem adding a new user?

  Last month, I added 18 users on my account first Cap I used a CSV file that included the e-mail account of the Manager of the learner to identify the contractor. No problem even if the majority leader was NOT as a user of Captivate, only his e-mail account was added as the supervisor of a Manager.

  Today, I can not add a new user (after the release of the first of February 2016) because the Manager of the person is not already in the system.

  However, my CSV file of origin listed the same administrator (using his email account) as the supervisor of a Manager throughout the world in the CSV file.

  So what has changed? And what do we do when we want to add a person who does not have a supervisor? As the CEO of the company? At some point, we have the ability to add a person who is not a supervisor.

  Am I missing something obvious?

  Hello

  To add a user who is not any Manager as CEO, simply add him as a user and under e-mail ID of his Manager just type 'ROOT' or 'company name '. You can consult the following link: what I can add users in bulk? What is CSV upload? Adobe Captivate help main

  Kind regards

  MILIN

• Problem adding ISCSI LUN to a virtual server ESXi 4.1

  Hi guys,.

  Having a really weird problem.
  
  Scenario-
  I have 2 x ESXi 4.1 (call B and C) running as virtual machines inside an another ESXi 4.1 host (let's call this has). Why this is because it is a test lab and I have limited the number of available servers.

  Problem-

  The problem I have is that the LUNS that I create on my HP P4000 VSA SAN do not appear on B & C. However, they go to the a. I consulted HP and confirm that IQN Intiators ISCSI for B and C numbers are attributed to the specific LUN. HP confirmed that it there is nothing wrong with my config and told me it's a question of VMWARE.

  
  A little more detailed look at the problem-
  
  

  1.      B (or C), I enabled ISCSI initiator.

  2. then, I made a dynamic discovery by mentioning my SAN Cluster IP address and he did "LUN ID" in the static discovery tab collection. So far so good.                       

  3. then I rescan all host bus adapters.
  4 I go to storage and to search for new data warehouses/LUN. Nothing is picked up. This is the strange part (the problem)

  Someone suggested to me that since B & C are in fact virtual machines inside an another ESXi, the firewall may block the ISCSI connections. I did some research and found the following information - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1026845
  

  "ESXi does not include a firewall, because it runs a limited number of known services and prevents the addition of other services.

  With such restrictions, the factors that necessitate a firewall are significantly reduced. Therefore, there is no firewall integrated in ESXi.

  For more information, see the Guide of Setup ESXi. »

  5.      
  Note-
  
  1 LUN ISCSI can be added inside A host, with no problems.

  
  2. I have already configured a VMKernel Port inside B & C (image view within B or C networking file is attached). Note that all the vmnic is virtual, since the B machine in question is actually a virtual machine.
  
  Any help with this will be highly appreciated that my project is at a standstill right now!

  2

  I want to say, the mode of promiscious on the vswitch on your physical esx host that is running the virtual methods.

• Problems adding 4 ESXi and ESXi 3.5 to VCenter4

  Hello all-

  I was not able to get any assistance from technical support or technical support of VMWare license. The excuse is that VCenter is too new to know the right answer. Everyone has a different answer.

  Question:

  I installed the server VCenter 4 Standard. I want to run ESXi 4 and ESXi3.5 hosts. When I try to add these hosts to VCenter inventory, it is said, no available licenses. I added 4 ESXi (free) license the vCenter but it still does not work. By the way; I ESX4 host (Licensed) I have not had any problems to add to the inventory. The error is attached.

  I appreciate the help, but please only answer if you know the answer for sure. I arched days with Guy tech in India without good results.

  Thank you.

  It seems that the problem of license with ESX4i/3i hosts. I hope you are using the free version of the two ESX. Problem start here only. If you need manage these free ESXi by vCenter version, you need to have the permit for them, unless you can't handle. To manage these free version of ESX, vCenter agent lacks. This agent can be deployed only under license of versions of ESXi. Please see the attached certification for vSphere document.

  Shan

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

• Problem adding items to a group after removing everything...

  Hello world

  I would really appreciate help on something. I have a group that has a few buttons in it. This group is one of the four States, and there is a component for each State. After the user runs the rest of the program and returns to this State, I want to delete the former buttons and add new buttons with new values. Bascially, I want to update the component when it is visited again. I have a problem with adding new buttons to the group when the user revisits the component / state.

  The group is created:

            <s:VGroup id="buttons"  x="0" y="35"  height="400" width="280" />
  

  When the function init for this component is called, buttons are added from an array of buttons:

  for(var i:int = 0; i < 10; i++){
            var button:Button = questions[i];
            trace(button);
            button.addEventListener(MouseEvent.CLICK, myEventHandler);
            trace(buttons);
            buttons.addElement(button);
  }
  

  When the user switches to the next State, the buttons are removed:

  if(counter == 4){
            buttons.removeAllElements();
            FlexGlobals.topLevelApplication.currentState = 'Summary';
  }
  

  When the user returns to its original state, the buttons are not added to the group as they are the first time. The trace output that each button is added is also different the second time:

  For the first time: (successfully)

  Main.MainBackground2.contentGroup.gameComp.buttons
  button8
  

  Second time:

  buttons
  button8
  

  Can someone point me in the right direction? And very good question, is there a better way I should do this?

  Is there a better way to refresh everything within a component when viewing it s second time?

  Thanks in advance!

  I don't know why you use addElement() to add buttons. You're not supposed to leave the functionality of the State to manage when the buttons must be visible? This is the way to do it in most cases. You can view a larger code example, where you have boiled down the code in a minimal example that always enhibits the question.

  If this post answers your question or assistance, please mark it as such.

  Greg Lafrance - Flex 2 and 3 certified ACE

  www.ChikaraDev.com

  Training Flex and Support Services