Problem/error deployment point on RT

Similar Questions

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Email problem: Error 550 - 0x800CCC69 - Message rejected due to the reputation of the sender's IP

  Hello

  I have a problem running Outlook Express in WinXP SP3. I can receive but not send an email, I got the error next message when sending email:

  Error 550 - 0x800CCC69 - Message rejected due to the reputation of the IP of the sender (or words to that effect, at least)

  I have other messages on the forum the impression is that this error occurs usually when there is a suspicion that an e-mail account is used to send the spam, but I talked to our ISP and email provider (this does not relate to a Hotmail address) and they said that there is no problem from their point of view , and it must be something to do with OE. We also checked all the settings of the ISP account and everything is perfect.

  Can anyone offer any help?

  Thank you

  This error message comes from your ISP. They refuse to relay messages. Unless you are not connected to your ISP directly, IOW, sending another address through your ISP, they have blocked you.

  Remember their service tech and ask to speak to a technician level 2.

  P.S. When an error message in question, please copy and paste in your message. Wording right can make a difference.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• ORA-04031: unable to allocate 32 bytes of shared memory ('shared pool'.  Check your error messages for the cause of the error. (= < POINTER >)

  Dear team,

  We have for instance R12.

  DB - 11.2.0.3

  12.1.2 - application

  in this concurrent instance depressed frequently when checking of log file showing the error as

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic FDPCRQ met an ORACLE error. ORA-04031: unable to

  allocate 32 bytes of shared memory ('shared pool'.

  Check your error messages for the cause of the error. (= < POINTER >)

  .............................................................................

  APP-FND-01388: cannot read the value for the profile FND_MGR_STRTUP_THRES_TIME option in the routine, and routine.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  
  

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  Post: WARNING: mail_queue_enter: create file maildrop / 379309.437: permission denied

  Please guide me to solve this problem.

  Concerning

  Kumar V

  Dear Kumar,

  I suggest you to check the FND_NODES table

  1) connect to SQLPLUS as the APPS user and execute the following statement:

  Select CONCURRENT_QUEUE_NAME in the FND_CONCURRENT_QUEUES where CONCURRENT_QUEUE_NAME like '% FNDSM ';

  (2) If you have found that FND_NODES table with entries incorrect node (old node from the Source Instance), and then run the query to clean below

  EXEC FND_CONC_CLONE. SETUP_CLEAN;
  COMMIT;

  (3) then run AutoConfig on all stages, firstly on the DB layer then APPS and webtiers levels to repopulate the necessary system tables,

  and make sure that you are now able to see the correct entries in the FND_NODES table and start the application services.

  Kind regards

  S27

• problem with deployment of SOA Composite

  Hello
  
  We have created a SOA project containing a composite SOA.
  
  When we try to deploy of Jdeveloper, was not getting deployed successfully. It was not showing any errors, and there is no error in compilation as well.
  
  The deployment is make failure showing the following message.
  
  [05: 37:32] problem in sending HTTP request on the server. Check the standard HTTP response code for 504
  [05: 37:32] archives sca_DelAtRiskProj_rev1.010.jar to soa_server1 deployment error [rws60045rems - vlan1.us.oracle.com:5002]
  [05: 37:32] HTTP error Code returned [504]
  [05: 37:32] no error message is returned by the server.
  [05: 37:32] # incomplete deployment. ####
  [05: 37:32] error deployment archive file:/slot/ems3763/oracle/soa/workspace/SandR_DelAtRisk/DelAtRiskProj/deploy/sca_DelAtRiskProj_rev1.010.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
  
  
  The Jdev version we use is 11.1.1.1.0
  
  the SOA version we use is version 11g GA
  
  Please let us know, what could cause this error or if there is another way by which we can continue with the deployment process.
  
  Any input onthis is much appreciated.
  
  Thanks in advance for your time,
  Regnier

  Raj,
  To get this thing working, follow these steps:
  The customer jdev machine you ping your server, it will give you an IP address.

  Now to connect to your WLS administration Console. Select AdminServer. In the General configuration, set the listen to this IP address. Do the same for your SOA managed server. Now restart the servers. Try the JDev client deployment. It will work.

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• Problems of deployment projects OR by using Wizard Setup of VS

  I wrote software in VB.Net (Visual Studio 2010, Measurement studio 2010 that uses or-Daq modules for capturing data) several months ago, where I faced problems of deployment. basically trying to Setup, I kept getting the caveat: "cannot find the dependency of the module with the signature"Microsoft_VC100_CRT_x86"... ». This problem was solved quickly through the solution presented HERE (who suggested downloading a different (older) version of the CR... merge modules dll 32-Bit and 64-Bit)

  However, just recently, I opened the solution, tried to rebuild the installer again, and I get:

  «Cannot find the dependency of the module with the signature ' Microsoft_VC100_CRT_x86.» AFA96EB4_FA9F_335C_A7CB_36079407553D'

  This also causes, the deployment will NOT work on the target computer. Throw an exception on the incompatibility of some in DLLs of NOR. I can try to reproduce if it helps. I don't know in these few months if libraries of NOR and DLLs have been updated on my computer or not and if so, I don't know if the version/signature of the merge modules have been changed on them.

  Is there a way to check the version of the current NEITHER-DaqMX, required dll / correct version of MS_VC... dll and the correct version of the functions essential OR that needs to go on the machine target?

  Please note that after 'Microsoft_VC100_CRT_x86' numbers are not the same as the other problem. I wonder that if I change the MS_VC100... modules merge again (on the development computer)?

  I installed the latest version of the essential functions OR DaqMx on the target computer. Should I uninstall and install the same version that I used to create the program?

  Looking forward to your advice.

  Best,

  Gerard

  NOR Tech Supp provided me MSMs with correct signature on them. Replacement of these in my GAC folder solved the problem.

  Thank you

• Problem error failed to set KB2345886. It's a real headache! help, advice appreciated.

  Problem error KB2345886

  See the following topic for your question

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c82fa2ea-6c79-49D1-9AF1-c5c13287dea9 >

• When you try to load a game on the Internet I get this error - entry point decode pointer could not be located in the Library dynamic link kernel32.dl

  Original title: need help please

  Please help me I've tried for hours just can't find it try to load the game from the internet charge just before its opening, he said
  error entry point decode pointer could not be located in the Library dynamic link kernel32.dll also tried to download directx said same thing for me
  Please help me thanks
  p

  Hello

  I suggest you try to run the System File Checker
  http://support.Microsoft.com/kb/310747

  It will be useful.

• Host process generic for win 32 services has encountered a problem error message

  Host process generic for win 32 services has encountered a problem error message. How to fix

  Hi MarkGanbucci,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. That you receive the error message?

  See the Microsoft articles below and check if it helps.

  Generic host process error message and a flashlight icon appear

  http://support.Microsoft.com/kb/821690

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

  http://support.Microsoft.com/kb/931852

• Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk.

  Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk. I am new to the computer world and that you just want to remove info a diskette and put the information on a CD. Can someone help me please?

  Hello
   
  
  1. are you able to use the other disks?
  2 have you tried to use this disk on another computer?
   
  The article below explains this error message. It is possible that data on the floppy drive went bad. I ask you to check whether the floppy drive works on another computer.
  Quick format in no. ID address mark results found
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;130627
   
  
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  Try this FixIt:

  Code error '0 x 80070646', '646', or '1606 ' when you try to install Office updates

  http://support.Microsoft.com/kb/2258121

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How can I correct I tunes problem = error code 42404?

  How can I correct I tunes problem = error code 42404?

  How can I correct I tunes problem = error code 42404?

  Post in the forums of Apple iTunes?

  Otherwise - use something like Revo Uninstaller (trial version) to make a more aggressive removal of ALL Apple software.  Reset.  Install the latest version of the web page.

• PROBLEM: Error 201 then manual download and now this... all for the trial of the PS. Ridonkulous!

  I spent over 3 hours trying to get this to work.

  First this thing creative cloud featured on my menu bar, but when I clicked it, it was empty.

  Then, I had to uninstall

  Then I had to clean the machine

  Then, I had to reinstall

  Then I had to start in safe mode

  Then, I had to reinstall it again

  Then, I had to unplug my router

  Then, I had to pee

  Then, I had to unplug my router again

  Then, I decided to walk the dog because it was still more than a waste of time to get this stupid error code

  3 hours later and I'm still dealing with this crap.

  Computer: MAC

  Operating system: OS x

  Version: Yosemite

  Problem error 201

  Then go into manual download - managed to get that to work for this thing stupid creative cloud.

  Now this: 2016-06-30_2018 - nlj2016 library

  What is amazing, is how long it takes to understand.

  What incredible mental masturbation just for a trial of photoshop so that I can understand how to use a PSD template for my facebook ads.

  And what loss HUGE absolute energy, time and effort for a company making BILLIONS of dollars, which can not afford to have someone understand this.

  Ridiculous.

  Hi all, I've tried all the various patches that were on these discussions and nothing worked. I finally found a way around it and spin back normal, but it was a trip. My summary is on this thread.  https://forums.Adobe.com/thread/1445371

  Seems in my case I went from error 201 error 123 and Adobe saying the question was my environment and necessary upgrade to the new Mac OS (not not the case), so the community has led me to the solution despite the insistence of Adobe that it was on our side and if we'd have just update our OS their thing would work... hogwash.

• Problem with anchor points, shifts vertically in the browser view. What is the problem?

  Problem with anchor points, shifts vertically in the browser view. What is the problem?

  have you allowed for the height of your head? I had to put my anchor above my content by the height of the header, otherwise, the upper part of my content was hidden behind the header