Problem in DropBox, after the last beta update

Similar Questions

• HP ENVY 360 M6: Wfii adapter on new 360 M6 desire becomes invalid after the last critical update.

  The wireless adapter on my new laptop becomes invalid after the last critical update. Reboot / restart, diagnosis or troubleshoot cannot fix or repair. I was forced to do a restore to the date preceding the update. Adapter Ok now? This is a problem on other models?

  Hello

  Try this first

  Download and install the latest driver of wireless LAN adapter can solve common problems with wireless Internet. Follow these steps to use the Device Manager to find the latest WLAN driver:

• After the last Windows Update (04/27/11), my home group no longer works

  Original title: homegroup after Windows Update failure

  After the last Windows Update (04/27/11), my homegroup is no longer in effect.  That's happened?

  I have Windows 7 Professional Version 6.1 Build7601: Service Pack 1 on both machines.

  The resolution of the problems of the residential group has done several things, but that did not help.

  What works removed one of the machines on the network for several hours and then reconnect to the network.  Don't know why?

• After the last mandatory update, I noticed that foulders image in my external hard drive would be stuck. This happens often.

  After the last mandatory update to Vista, I noticed that foulders image in my external hard drive would be stuck. This happens often.

  Please fix this.

  Hi Mikepolifka,

  ؠ What updates did you install on your computer?

  Try SafeMode as the first step.

  Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly, or that might prevent Windows from starting correctly. If a problem does not reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. If a program recently installed, device, or driver prevents Windows from running correctly, you can start your computer in safe mode, and then remove the program that is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can also perform a restore of the system on your computer and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If it works fine after system restore you may have to manually install updates one and check the status.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• After the last automatic update, I can't receive any email to any of my 6 email accounts?

  I have been using Thunderbird without any problems and just after the latest Automatic update, happened the other day, I can not receive or send e-mails to all. I checked all the settings of accounts and find nothing has changed. I think it's a problem with the update? I don't see any way to update or install the program without losing emails or information. Does anyone else have this problem?

  I make a new account using the same e-mail settings and was able to receive and send emails on the account that I used. So, just to try it, that I'm back in the original account and now I am able to send and receive emails again from him. I hope he takes care of the problem?

   I then removed the new account and am using the original one now.
  

  Everything works as it should right now so it's resolved for now.

  Thanks for the replies.

• Unable to access network printer after the last automatic update.

  After automatic security update KB2660465 and KB2661637 today, I can no longer print or access our office network printer. I think it has something to do with the Windows Firewall, but I'm not sure what to change. Any help is greatly appreciated.

  Thanks for the reply. I understand the problem. After the last update, it must have been a change to the firewall. I was finally able to reinstall the FIRST printer by turning off the firewall. This allowed me to see the printer and reinstall it. It worked very well after turning on the rear firewall after installation.

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• Update failure after the last Beta v32 downloads

  After the updated beta version 32, I am unable to download files.

  The status of the download hangs at about 1 second left each time.

  I'm behind a proxy at work, but the download of the file did not have a problem in the past.

  It's the recent9 b 32.0 and it has been fixed and will be in the build 32.0 then, probably the RC1 build 32.0 if normally such a fix would be a beta version as 32.0b10. The release is Tuesday next so little time. Type of topic: config location bar (address) and you can try to change the empty value of browser.safebrowsing.appRepURL in the meantime. An empty value does not work you can try https://sb-ssl.google.com/safebrowsing/clientreport/download?key=%GOOGLE_API_KEY%

  For not not reading the useful comments are bug / spam.
  Bug 1057764 - Download Manager regression in the update of FF32 beta 9

• There was a problem with this web page, so it has been reloaded. Started happening right after the last security update.

  Since the last update security update some says there are. "There are several sites that I get the error" there was a problem with this web page, so it has been reloaded "and it does not load the site ultimately. It is in Safari. Sites will open in Chrome very well. I tried to delete the cookies and cache. Restart the browser.

  Version OS X 10.9.5

  It can happen if you have third party advertising blockers installed as extension Safari or third party plug-ins.

  How to troubleshooting instructions here.

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• Mac restarts after the last security update

  Hello, I upgraded my imac (late 2009) to El Captitan, a few days ago and everything went well and I had no problem to use it after the upgrade.

  Yesterday I tried to update the last security fix (2016-001 10.11.6) and now it will not re - start. I get a clear grey screen with a circle with a line through it.

  Can anyone help please?

  Hello SallyP,

  Thank you for using communities of Apple Support. It is my understanding of your light a circle with a bar symbol backslash when you try to start your iMac. I use my iMac every day and I would be very concerned if he does not start correctly. I'm happy to help you.

  This particular screen means that your Mac could not find a valid system folder from upward. I recommend that you try reinstalling OS X using OS X Recovery. Please follow the steps below.

  To boot from OS X Recovery, hold down the command (⌘) r immediately after start-up or that you restart your Mac. Release when you see the Apple logo. If you can not boot from OS X Recovery, now try the Command + Option + R key at the start of the OS X Internet Recovery*.

  Start-up is finished when you see the window OS X Utilities

  Recovery of OS X

  Once your Mac OS X Recovery, choose to reinstall OS X OS X Utilities window, and then follow the instructions on the screen.

  Also, here is some very useful information on the different screens that display when starting.
  On the screens you see when your Mac starts up

  Have a great day!

• Contacts file is empty after the last OS update.  I have a backup, but what is the name of file

  I have a backup, but what is the name of the contacts file so that I can restore the backup?  After that the last operating system updated, the contacts file is empty.

  If you use Time Machine for backup, you can open the app on your Mac and then click the Time Machine icon in the menu bar and then click on "Enter Time Machine".

• HP Notebook: No cursor after the last automatic update (update anniversary 10 Windows)?

  This device 15-af131dx ran a longer than normal auto update a few days ago (probably on the birthday for windows 10 upgrade). After the reboot, is no longer a visible cursor on the screen. Time, touchpad and mouse (USB), no longer works. The system recognizes USB connection (it makes a sound when I remove the USB and when I attach in another USB port), a light will appear shortly on the mouse, but then disappears. Messages to include 'Impossible to connect to the Synaptics Pointing Device Driver' and for the State of the device touchpad "this device cannot start. (Code 10) »

  Hey @Karin13,

  Welcome! The forums you'll find helping hands, solutions and suggestions! I understand that you don't have a cursor after an update has been done.

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried uninstalling the driver for the Touchpad, restart your laptop twice, then reinstall the driver for the Touchpad?

  Have you tried to use an external mouse to see if it's only the Touchpad?

  Here is a document for you called using the touchpad or the ClickPad. This document can help you with problems you encounter with the missing cursor.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Have you tried to uninstall the Windows Update?

  If this isn't the case, please follow these instructions and see if they help.

  • Safe Mode boot
  • In the search type Control Panel
  • Click on Control Panel
  • Click on programs and features
  • Click view installed updates
  • Click the drop-down list next to installed on
  • Select the dates when these problems began to occur
  • Go to the shows updates
  • Right-click on the update
  • Click on Uninstall

  Please uninstall all updates made on this date. When you're done, restart your laptop twice.

  If this does not change anything, please use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows 10:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Select "Choose a different restore point"
  • Click Next
  • A box that says "Restore your computer to the State it was in prior to the event selected" will pop up
  • Choose event
  • Click Next
  • Click Finish
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Here is a document for you on the error Code: 10 in Device Manager. "The document is Microsoft and it is called this device cannot start" error Code 10 in the Device Manager in Windows. I've included this document strictly for information purposes, if you want to know what means the error code.

  If this answer helped, please use the button accept as a Solution . If you want to give me a five high virtual, please click the Thumbs Up icon below.

  Please let me know what are the results of the above suggestions and if you need assistance.

  Thank you for agreeing!

  Have a good

• Pinch zoom opening and closing (mac) does not work in the last beta update

  Anyone know why pinch open close to the pavement of mac suddenly not zoom the last updated beta?

  Preferences that control this action have been reset to empty strings.

  You can use the related browser.gesture preferences to change these values to restore the old behavior:

  • Browser.Gesture.Pinch.in-> cmd_fullZoomReduce
  • Browser.Gesture.Pinch. in.shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
  • Browser.Gesture.Pinch. out.shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.Latched-> false
  • http://KB.mozillazine.org/about%3Aconfig

• Why is taking hours to load after the last iTunes update?

  I have Windows 7. I don't know even how long it actually takes to potentially - more than 2-3 hours - open 6-7 hours. I woke up this morning and it was finally opened after I clicked on it last night. This is certainly new behavior with the last update. The document "about iTunes" is quite annoying, because in fact it does not specify which version is installed - this should be at the top of the document, I think. However when I run "Apple Software Update" it says "your software is up-to-date." It is not very useful as a music player more if it takes 3 to 7 hours to open - pretty amazing honestly. In addition, it does not show even any UI again. The Task Manager Windows says that iTunes.exe and iTunesHelper.exe are running and showing 0% CPU, so it doesn't seem to do much. That's happened? This is unacceptable.

  More information: it seems to be stuck in the Windows kernel somewhere as "taskkill /f /im itunes.exe" is not actually kill him - even though it claims too - she is still ongoing in the Task Manager and rekilling he said the same thing:

  Good C:\Users\David > taskkill /f /im itunes.exe

  Success: The process with PID 28976 "iTunes.exe" ended.

  Good C:\Users\David > taskkill /f /im itunes.exe

  Success: The process with PID 28976 "iTunes.exe" ended.