Problem in my OS identification

Similar Questions

• Problem using the Overdrive Media Console software program

  When I try to download audio files using the Overdrive Media Console program (used by the public library in my area) I get the error message "error) xC)) D2781: problem occurred in the identification of rights management digital retriving.»   What is the reference for this?

  Hello

  • What is the format of audio file you were trying to play?
  • What version of Windows are you using?

  You can follow below link that can help you to solve your problem:

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11E2&ContextId=71&OriginalID=C00D2781

• My HP Photosmart C4680 was possessed by the devil

  My touch screen is displayed that it is scanning, even if it's not and I didn't ask to. When I try to restart, it lights up at the main menu for about 45 seconds and then it goes to the menu scanning, then it asks to insert a memory card, and finally he goes to this indicator of scanning.

  I've uninstalled and reinstalled the software. It shows online on my Windows XP Control Panel, but unless I catch him until she started it, it won't print. The only way to stop him is to pull on the power cord and wait and reconnect it. But he does just over and over again.

  Has anyone ever heard talk about this?

  Regarding the response of CamelJockey on May 20, 2011, regarding the capacitor bad, I just sat and created this user account in the express purpose to check everything that was in response to this post.

  In short, I had exactly the same problem.

  Bad cap.

  Followed the instructions, opens the C4680 and he sat the the small 330μF 6.3V capacitor TEAPO, with a high domed grimly in the flat view. All other capacitors (small things can - research) had on beautiful dishes with zero curve or bulge in them and there was no problem whatsoever in the identification of the odd man out.

  Broken the capacitor incriminated, led up to my local MOM and the supply store electronic pop that has been there for the last four decades and got a replacement that differ only by the voltage (10v).

  Went to Sears and bought a good craftsman 150/230 watt iron to be welded (which came with a few nice welding Tin/Silver, tips and a levy which has proved to be indispensable (the sons of the new CAP were a bit larger than the original, and the holes left of the removal of the badly needed CAP weenciest of bore little on)) , came home and made replacement in the near future, shot to the top of the printer and it worked PERFECTLY!

  Hallelujah!

  My hat is out of CamelJockey of the piece seamless from boards.

  And for everyone out there who may be scared to pick up the torx screwdriver and open their printer, don't be afraid. Work slowly, carefully, the son who must be separated from the spirit (those with little plastic plugs is fairly simple and the dish simply pull and push) and in no time you will have the small circuit board by hand, with the faulty capacitor on your mercy, ready to be removed and replaced.

  If you have never soldered before, no worries, it is not difficult. The spirit of the hot tool, be aware that you want to place the tip of the soldering gun heat ONLY IN THE WIRE going to the condenser down with its roots where it plunges into the circuit board and be patient for a minute or three to rest the hot tip of the soldering iron on this thread, giving the heat time to work its way into things enough to melt the solder and exit and then reconnect the two sons, one at a time. Work with pliers to nozzles. Be gentle. Be patient. Maybe the practice on dead equipment taken you aside get everything first, just for a little bit the hang of things. Google some YouTube tutorials if you're still not quite sure or confident and in no time, you'll be ready to go.

  The full cost of the work, new brand solder included, is way less than the cost of a new printer, so what are you waiting for?

  Go there!

  Once again, a thousand thanks to CamelJockey and brazing all happy!

• The system update tool

  Use of the system after installation update tool?  It does not appear to have solved the problem with security download errors... very frustrating and tedious grrrrr!

  Hello Vespamama,

  Thanks for posting your question on the Microsoft answers Forum.

  After you download the system update tool, it runs a unique analysis of inconsistencies that might prevent future maintenance operations. This tool is only offered by Windows Update only if you have a problem that the tool identifies that it can fix.

  What kind of error you see which should be fixed with the system update readiness tool? Maybe there's another fix to your question.

  Following error codes are those who can fix the system preparation tool:

  0 x 80070002

  0x8007000D

  0x800F081F

  0 x 80073712

  0x800736CC

  0x800705B9

  0 x 80070246

  0x8007370D

  0x800737A

  0 x 80070057

  0x800b0100

  0 x 80092003

  0x800b0101

  0x8007371B

  Please reply back to give more details about the problem you are having. We look forward to helping you solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DRM with Overdrive Media Console error message

  I have a HP pavilion dv5230ca laptop, under XP (SP3) with Wi - Fi and purchased in August 2006.  I would like to listen to audio books through our online library.  To do this, I downloaded the Overdrive Media Console application that is required.  When I perform the Windows Media Player Security Upgrade, which is required before any audio books can be downloaded on my computer, I get an error message: "this is a problem to retrieve the identification of digital rights management machine.  Contact Microsoft technical support.  When I go on the Microsoft site, it says if it is a software problem and the computer was purchased with the software already installed, and then contact the manufacturer (HP).  Before talking to someone at HP, I checked in your forum, but there seems to be no reference to my specific problem.

  The only info I can add is that this laptop had an accident in 2007 and we took it to a professional to be restored.  Everything went well with it, except for this problem.  (I can't tell if this problem would have occurred before the accident that I tried to access the audio books so far).

  I'd appreciate any help you can provide. Thank you

  I found a solution to my problem.  I find the DRM folder on my computer (it is a hidden file, so first go to windows Explorer, tools, folder, view tab options, is selected * Show hidden files *, deselected * Hide protected operating system files).  Then to C/documents and settings / all users, and there it was.  Renamed * DRM.old* then through the procedure to update the Windows Media Player Security Update in the Overdrive Media Console software and update was successful and was able to download audio books immediately.  I hope this helps others.

• Error 0 x 80070643 WSE and a few other things _

  WINDOWS Security Essentials prompted me to update I did, it cannot be performed due to error 0 x 80070643. Restarted, I tried again, same thing. From what I've read, it's a generic error code. After trying to install it once more, he says now: error code 0 x 80070002.

  Vista has developed a lot of problems last year. Many times I have to activate the sound manually, the Explorer is "not responding" about 1 to 5 times. Terrible. There is perhaps an essential element is wrong with my machine. When I tried to contact the Windows Support it 'problems with my product identification No. Well, it's rich, it came pre-installed, and I have no idea what the problem should be with her. It worked fine a year ago.

  What can I do? I am so tired of fighting Vista on everything.

  You can ask this question to Microsoft Security Essentials forums:
  http://social.answers.Microsoft.com/forums/en/msestart/threads?filter=AllTypes . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• DEC with sequence

  Hello

  I know you can do a DEC with a sequence in 12 c but I'm stuck on 11 GR 2 for now.  My problem is mostly performance.

  I have a few codes that I need to sort and store in a table (not a problem).  The problem is that these identification numbers are not contiguous (1,2,3,4, etc), but more random with jumps as 103334, 10567, 11777, etc..  I need to be able to choose later on the ID ordered the lines 1-100, then 101-200, etc.  The performance issue is available in because there are 320 million of these identifiers.

  Initially, I tried this:

  CREATE TABLE R_LXOIDS
  AS
  SELECT
      CAST(NULL AS NUMBER) LXOID_SEQ_ID,
      RO.LxOID
  FROM MxRelType RT
  INNER JOIN LXRO RO
       ON RT.MxOID = RO.LxType
      AND RT.MxName = 'Function'
  ORDER BY RO.LxOID ASC;
  
  
  UPDATE R_LXOIDS
  SET LXOID_SEQ_ID = TEMP_SEQ.NEXTVAL
  WHERE LXOID_SEQ_ID IS NULL;
  
  
  
  

  The initial ETG takes only 15 minutes, but the update takes forever.  Is there a faster option?

  I just thought difficult to create the empty table, then adding an insert before trigger to set the LXOID_SEQ_ID with the following NEXTVAL, then do an insert using the above query, but I thought I'd have the same problems of performance.  Any ideas?

  1. CREATE TABLE R_LXOIDS
  2. AS
  3. SELECT
  4. TEMP_SEQ. NEXTVAL,
  5. RO. LxOID
  6. OF MxRelType RT
  7. INNER JOIN LXRO RO
  8. ON THE RT. MxOID = RO. LxType
  9. IN CANADA. MxName = "function";

• Anonymous host names

  Hello. I had chosen not to send the host name real return to the dashboard so that all as anonymous servers. When it's time to make the reports how the dashboard indicate the actual host names. If the question is never download this information, how to prepare a report for the customer with host names that they recognize - rather than a bunch of anonymous servers?

  Thank you

  That's the problem with sending information identification does not: you can not identify the systems! The scenarios will give you a number of necessary guests. Investment is not really a problem if they use the DRS still. It can become a hindrence try to identify exceptions. You can always run the planner of the PAC reports.

  Dave

• How can I install a trial of my provider before getting my receipt with a serial number?

  The email that said after I submitted my academic verification:

  'We will review your identification within one or two business days of receipt. You will be notified when your identification is approved or if there is a problem with the provided identification. Notice will be sent to this e-mail address. Check the order status page to address any questions about your order.

  
  

  You can install and use your product as a trial until 30 days pending receipt of your serial number Adobe. "

  I bought a very large product with features a little, then how do we install which especially before entering the serial number for it?

  Order: Cloud creative Indiv ALL, cross-platform, multi-language desconsiderations
  

  start your test here, http://www.adobe.com/products/creativecloud/faq.html#free-membership

  or if you follow the 7 steps, you can download a trial through one of the links on this page using a browser that accepts cookies: http://prodesigntools.com/adobe-cc-direct-download-links.html

  and activate it with your serial number.

  If you have a problem downloading, you don't follow all 7 steps.  as a general rule, do not carefully follow steps 1, 2 or 3 is the problem, but your browser must also allow cookies (a setting of restrictive browser) is another potential source of problems.

• White black type on officejet 8600 display

  This is a good...

  Just bought the new Officejet 8600 and all seem ok with the establishment.  However, the first document ID I tried printing cannot print correctly.

  In the document, I have a number of black areas with white type.  When it prints, the white guy goes black and so cannot be seen.  In addition, this does not happen throughout the entire document.  There are sections that change the color black and there are some who remain in the reverse position.  To complicate the problem, the color change is incompatible in the same line of text?

  I contacted HP and as usual, they thought that the problem is with the identification program.

  This also happens when I tried to print some old documents in place in Pagemaker.

  Any help would be appreciated.

  Jim

  Thanks, I tried your suggestion and it worked!

  I didn't know that would be the question as a text always printed in white.

  Well... live and learn.

  Jim

• Not enough values error

  I get this error in the following query. What could be the problem?
  
  Insert into Identification@Indus_Link
  (Vno,
  Employeecode,
  Employeeno, Employeename, Fathername, Nicno, Fathernicno, Dob, city, District, address, telephone, Mobile, Entrydate, Jobtitle, Jobnature, Joiningdate, Confirmationdate, rest, Issuspended, Eobino, Ssno, Shiftcode, Jobtype, Accountno, Departmentid, Educationcode, experience, Eobi, Ntn, Identification_Mark, sex, Fromdate, so far
  )
  Values (IDSEQ, EMPCODE, EMPNO,
  (Select Employeename, Fathername, Nicno, Fathernicno, date of birth, city,
  Neighborhood, address, telephone, Mobile, Entrydate,
  Current_Designation (Employeecode),
  Current_Jobnature (Employeecode), Joiningdate,
  Still, Issuspended, Eobino, Confirmationdate, Ssno,
  Current_Shift (Employeecode),
  Current_Jobtype (Employeecode), Peru,
  Current_Department (Employeecode), Educationcode,
  Eobi, Ntn, Identification_Mark, sex, experience
  FromDate, so far
  Identification
  Where Employeecode = '911145')
  )

  The values are enough.

  No, they are not... that's what means the error message...

  Willy says:
  IDSEQ,
  EMPCODE,
  EMPNO,

  are variables.

  Yes I know.. I was referring to the SELECT... This should be a scalar subquery

  SQL> create table test
    2  (id number
    3  ,name varchar2(50)
    4  ,lastname varchar2(50)
    5  )
    6  /
  
  Table created.
  
  SQL>
  SQL> insert into test
    2  values (1, (select 'something', 'other' from dual))
    3  /
  insert into test
              *
  ERROR at line 1:
  ORA-00947: not enough values
  
  SQL>
  SQL>
  SQL> insert into test
    2  values (1, 'something', 'other')
    3  /
  
  1 row created.
  
  SQL> 
  

  do this instead:

  insert ...
  Select IDSEQ, EMPCODE, EMPNO,Employeename, Fathername, Nicno, Fathernicno, Dob, City,
  District, Address, Phone, Mobile, Entrydate,
  Current_Designation (Employeecode),
  Current_Jobnature (Employeecode), Joiningdate,
  Confirmationdate, Rest, Issuspended, Eobino, Ssno,
  Current_Shift (Employeecode),
  Current_Jobtype (Employeecode), Accountno,
  Current_Department (Employeecode), Educationcode,
  Experience, Eobi, Ntn, Identification_Mark, Gender,
  Fromdate, Todate
  From Identification
  Where Employeecode = '911145'
  )
  

• A problem occurred during the digital extraction of the Machine Identification of rights management. XP and service pack 3

  When I try to down load MP3 audio books from the library I get error message "rights digitial management machine identification error.» I tried to download the upgrade of the security to windows media player component that had fixed this problem before, but the update button was grayed out.  I've applied all updates of XP and windows media player I can find and no solution.

  Try to reset the DRM system, by following the instructions at http://support.microsoft.com/kb/891664 . Tim Baets
  http://www.BM-productions.TK

• Network - LAN stucks on the identification problem

  I have a problem connecting to a LAN for Windows 7. He repeats to me that the LAN is identification. I have two operating systems of this computer. XP operating system works very well, so I guess that the network adapter is ok. Before Windows 7, used to work I deleted my users and created new users. The IP address is 169.*. *. * and the default gateway is blank. I have another computer hooks up to this router and it works fine. I tried to solve the last two days without success. Help, please.

  OK, if you're connected via cable (no WIFI), then you can try to run Windows 7 in "safe mode with network":

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  part:

  Safe mode with networking

  and test if it works or not.

  Can write you here if your network card is integrated in the motherboard or it is autonomous in the PCI bus card.

  Can you write here the manufacturer and model name of your NIC (stand-alone) or the manufacturer and the model name of your motherboard (integrated in the motherboard)?

  Some information about your network card, you can find in the 'Device Manager':

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  (under network adapters)

  LC

• Problems with identification information

  Hello
  using credentials sseems to be easy, but I have problems in 11.2 under linux:
  This code executes without any problems:
  Start
  dbms_scheduler.create_job (job_name = > 'TESTJOB', job_type = > 'EXECUTABLE', job_action = > ' /tmp/mytouch.sh',enabled= > TRUE);
  end;
  /
  Externaljobs.ora run_user is tomtester and rungroup tomtester as well.
  so I have that my problems seem to be a protection problem.
  
  For the use of credentials, I have a tomtester of OS user with tomtester as password. I can connect with the user and can run /tmp/mytouch.sh with no problems.
  
  So I created a credential:
  
  Start
  dbms_scheduler.create_credential ('MYCREDENTIAL', 'tomtester', 'tomtester');
  end;
  /
  
  And change my job creation script to use these credentials:
  
  Start
  dbms_scheduler.create_job (job_name = > 'TESTJOB', job_type = > 'EXECUTABLE', job_action = > ' /tmp/mytouch.sh',enabled= > TRUE, credential_name = > 'MYCREDENTIAL');
  end;
  /
  This job fails with error # 27370
  "EXTERNAL_LOG_ID ="job_81737_5706 ",
  ORA-27369: Vom Typ EXECUTABLE been nicht mit output-job Code: argument list too long
  STANDARD_ERROR = "" launch external job failed: invalid username or password "" "
  
  Invalid user or password - why that? None of my OS users can run any job. The error message is always invalid user or password.
  Any ideas?
  Thanks in advance
  Joe

  Hey Joe,

  If you use a credential, externaljob.ora is not used. Instead, the Scheduler uses $ORACLE_HOME/bin/jssu connect to the operating system using the username and password specified in the credentials.

  Here are a few things to check

  s ' ensure that identification information has been created with the right user name and credentials
  -Make sure that you can su and sudo user
  -check the system or newspapers for connection errors
  -If you use linux or solaris make sure that pam is properly installed. In particular, make sure that the libpam.so file exists and is a link to a valid existing file

  Hope this helps,
  Ravi.

• Problem installing Works Suite 99 disc into my XP computer. I don't know the product identification number.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I try to install Works Suite 99 my drive in my computer XP (it was previously in an old computer running Windows 98.  Setup requires a product ID number that is not in my documents of purchase in 1999 of 20 digits.  My computer has XP on a programme of work 2004, but prefer to use the simplified version of 1999 instead.  Can anyone offer suggestions to overcome being blocked by the need for a product ID during the installation.

  Thank you. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Ted008gar,

  You must contact Microsoft Customer Service and Support to locate and get the product key from the disc. Access the link below to learn more on how to identify, locate, and replace a product key.

  http://support.Microsoft.com/kb/811224

  I hope this helps. Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.