problem in order to upgrade the window

Similar Questions

• How to upgrade the windows photo gallery

  How to upgrade the windows photo gallery

  Hi deezden1,

  Do you want to update Windows Windows Live Photo Gallery Photo Gallery?

  If you want to install Windows Live Photo Gallery, you can download it from this link.

  Windows Live Photo Gallery 2011

  In addition, also see this link: information about the Windows Live update photo gallery

  Note: This article describes an update for Windows Live Photo Gallery that is available on Microsoft Update. This update will be offered to customers who have a 2008 version of Windows Live Photo Gallery.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• There was a problem that caused some of the Windows Live ID Sign-in parts must be disabled.

  Original title: problem of windows 7

  I GET a MESSAGE every DAY OF WINDOWS 7, CONCERNING WINDOWS LIVE ID SIGN-IN ASSISTANT AND READINGS;

  Windows Live ID Sign-in Assistant

  There was a problem that caused some of the Windows Live ID Sign-in parts must be disabled.  May not be able to sign you in to windows live in some programs that are installed recently.  For more information, please visit: http://go.microsoft.com/fwlink/?Linkldf= 144689

  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail-wlinstall/Windows-Live-ID-sign-in-Assistant-to-be-disabled/49a8ad70-f645-4e73-BAAA-d4485dddb354

  The 1st answer worked for me (unless the link).

• DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

  Several problems to the upgrade of WINDOWS 7 for WIN 10.

  The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

  The definition "print directly to the printer" is not.

  Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

  Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

  Printer is listed in devices and printers.

  HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

  Printer turns off or recycle off on after turning on.

  Hello

  If you have a driver problem:

  Remove the driver completely from the computer, then download and install the lates driver.

  Here is the link incase you need

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

  Now, the yellow light flashes on the Panel means that the printer needs attention, like:

  -Close coverage which is open

  -Of paper

  -Paper tilt

  -Jam

  -An error code

  If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

  On the following link, you can find more information on how to prepare the error codes

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

  If you have an error code, the printer appears offline on your computer.

  On this other link, you will find how to check other messages on the printer

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

• I have problem rotation tiff file in the Windows Photo Viewer.

  The last time when you use Windows XP, it is ok, but after upgrading to Win7 have problem rotation of files tiff using standard Windows photo viewer or Windows Live Photo Gallery. This happens to the files without administrator rights. Understand that the last time WinXP also had this problem but it had been fixed. Any resolution for Windows 7?

  If I understand correctly, you cannot rotate the tiff file in the Windows Photo Viewer. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 is the issue limited to the tiff files?
  3. you receive an error message on the computer?

  Photo Viewer Windows can only view .jpg and .jpeg, .tif and .tiff, .png, .gif, .bmp and DIBs, .wdp file types.
  For more information, see this link:
  Understand the types of image files
  http://Windows.Microsoft.com/en-us/Windows7/understanding-picture-file-types

  Method 1:
  You can take all the permissions in the folder of tiff files and check.
  Here are the steps to change the ownership and permissions of files and folders:

  a. right click on the file or folder, click Propertiesand then click the Security tab.

  b. click Advancedand then click the owner tab.

  c. click change, and then do one of the following:

  · To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  · To change the owner to a user or group that appears in the area of change of ownership to , click the new owner.

  d. If you want to take ownership of the contents of the folder, select the checkbox replace the owner of sub containers and objects .

  e. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.
  
  Note folder_name is the name of the folder you want to take charge.

  f. click OKand then reapply the permissions and security settings that you want for the folder and its contents.

  Method 2:
  You can check the link to rotate a picture using Windows Photo Viewer

  http://Windows.Microsoft.com/en-us/Windows7/rotate-a-picture-using-Windows-Photo-Viewer

  If the problem is on the Windows Live Photo Gallery you can post the question on the link provided below for assistance

  Gallery Portal

  http://windowslivehelp.com/product.aspx?ProductID=20

  Please follow the recommended steps and post if you still experience the problem. I'd be happy to help you further.

• Problems with fonts after upgrade to Windows 10

  After the upgrade to Windows 10. Some of the police are white with black outlines makes it difficult to read a few pages. I refreshed and reinstalled firefox and it's still there. I disabled and deleted all the addons and it's always the case.

  Both pis. My only solution is to delete the font cache. Restart the PC and uncheck the allow the Web Sites to choose their own and simply used the Arial font. I can read very well now. For some reason any double check the last option is by default the text to look like that. Does not occur in Google Chorme then Yes.

• ENVY 15 - 3040NR problem of brightness after upgrade to Windows 8

  I have upgraded to windows 8 pro. Put updated and reinstalled all the drivers available on the website of HP drivers. The brightness is not set. I can see the cursor and move it, but it makes no difference. The keyboard shortcut keys are also display the osd for brightness adjustment and it adjusts to the bar, but the brightness is the same. Help, please!

  Hi Executioner,
  
  Remove Windows 8 may be the best solution for you, as support for the brightness, the controls do not seem to be included in the latest video drivers. Windows 8 should work well on the phone for the most part; However, until the real drivers are available for the hardware, issues like these can happen as all functions will not be supported without them. I suggest to keep an eye on your laptop support page above for Windows 8 drivers to be updated (it seems that the last update was 2012-10-18, version 9.0.0.0)
  
  I hope this helps.

• HP Envy 17 Notebook TS: upgrading the window

  When I am notified that there is an upgrade of the window, I run it and it downloads and installs it but when you check to restart the computer, it starts, but States that it cannot complete the downloads and product to remove all the day that has been done.

  Hi @Gary46 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook dv6-3180ea and issues with updates. I would simply ignore the update. It happens from time to time that the update will not go through your system is already updated and it's why it fails.

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers who might need to update on your system.

  It shows me it seems to be interference with the task of software, usually your virus protection.

  You may need to disable this software, and then run Windows Update.

  I hope this fixes things for you.

  Thank you.

• HP 15-r078tu Notebook PC: problem of brightness after upgrade to Windows 10 - r078tu

  I use HP 15-r078tu Notebook PC.  After the upgrade to windows 10 laptop brightness was awkward.  I always work with a minimum brightness.  But after the upgrade of the brightness of the screen is high, even when I set minimum height in power options.  When I keep up it is brighter than before.  And after the upgrade, the brightness control buttons work abnormally.  Reduce the brightness button is increases the slide of the brightness and the brightness button increase it decreases.  After a reboot, it works fine, but only after a reboot whenever you turn on the laptop.  I checked all updates in assistant hp support and updated all the drivers.  I also checked the online solutions for

  1. change the display adapters in Device Manager

  2. check updates

  3 go back to the previous driver and even after change to basic brightness microsoft display adapter is the same (he doesn't) even fit in (buttons) hardware / software (power options).

  

  Nothing has worked.  Any solution please?

  This driver is listed under the W10 drivers section, even if it's for W8.1 and more.

  You might want to try this one.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp69589.exe

  If this one doesn't work either, unfortunately, I don't have any other suggestions for you to try.

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems installing of printer in the Windows XP compatibility box

  I am trying to use my printer Canon MX870 Windows XP compatibility mode. In the compatibility window is my computer has no printer, and apparently no USB ports don't either.

  When I try to print from a program that is running in compatibility mode, I get an error box that says: no printer driver is installed.

  I found an MS article that says I should choose the Windows XP desktop tools > parameters command and check the printer in the menu of the integration features. I tried and found that printer is already checked.

  I tried to install a separate printer driver compatibility window and had no luck there either. The "Add a printer" Wizard has informed me that there is no plug-and-play printer connected to the computer. When I tried to install the printer manually, I found that none of my USB ports have been listed as locations.

  My computer has eight USB ports, an RS-232 port and a parallel port. The Wizard indicates that it is three parallel ports, 4 serial ports and seven ports 'TS' appointed TS001, TS002, etc., of which the last is "inactive".

  I don't know how to make the link between these imaginary ports of Windows XP for real hardware in my computer. (If I did, I would still need to know which one to use. I know, but Windows is supposed to automatically allocate the names of devices on the USB ports that is appropriate, in view of these problems, I am not prepared to assume that it will be).

  How can I handle this? All this seems to be a mess.

  Hello

  
  To work around the problem, try the following steps if you have this driver on the XP Mode desktop file.

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file you have on the desktop XP mode, then click OK. Now, check if the printer is correctly installed.

  You can even provide the driver through a disk file if you do not have internet access to download the file via the XP mode.

  Alternatively, you can check the link for more information below:

  
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://blogs.technet.com/b/windows_vpc/archive/2009/09/26/networking-and-using-Windows-XP-mode.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Best practices to upgrade the Windows operating system

  Hi all

  I'm looking to improve vSphere Essentials Plus 4.1 to 5.5 in the near future. The vCenter Server and DB, is currently hosted on the Windows 2003 Server operating system on a physical server. I need to upgrade this server, Win2008 R2 until I can enhance vCenter to 5.5. What is the process for this task to upgrade using the same physical server?

  Thank you

  Andrew

  Here is a link that will help you with that.

  Upgrading operating system of vCenter Server - punching of clouds

• Big problem after recovery try upgrading the firmware, now I have "POWER OFF".

  Hello

  Today, I tried to upgrade the Palm PLUS my new Z2 firmware, unfortunately something wrong with the PC and USB disconnected, after this I tried to bowl of Z2 SUS recovery still once and I completed the restore and update, but now I have an error!

  

  How can I solve? Pls help me! Phone has 5 days!

  
  

  It's quite strange, but sorry to say this, but you have to stop by your local Sony Xperia care

  http://www.sonymobile.com/global-en/support/contact-us/

• HP DV6-1240eo problem: "Volumebuttons" lost after upgrade to Windows 7

  Hello

  I have a problem since I factoryresetted my HP DV6-1240eo. It's original is Windows Vista, so first I installed as first of the factory (after the factory reset) and then used the HP disks for a Windows 7 upgrade.

  Everything I did to get rid of a bunch of * beep * which makes the computer slower.

  At the moment I can't use these buttons that I took a photo of (the volume bar and mute button, on the left. Symbol wireless works), because I don't really know what they are called or how I managed to get them back to work with Windows 7. They worked before the factory reset, so it's a complete mystery, why they do not work now.

  Any suggestions?

  

  Install the software the HP Quicklaunch supports the server.

• Problem with joining photos for the Windows 8 library mail program and error message 'create an association in the default program control panel '.

  Original title: E-mail question

  I want to send pictures of the library in Windows 8. Cannot do. He told me to create an association in the default program control panel. Been there, no help.

  Hello Jeff,.

  Please keep us updated on the status of the issue.

  I will certainly help you in the right direction to solve the problem. However, I would be grateful if you could let us know that you have set the email client that you use as default to the Control Panel program to send and receive electronic messages from the computer.

  Please respond with the requested information, in order to help you solve the problem.

  Thank you