Problem to set up the adhoc network

Similar Questions

• Need help to choose the correct setting in the virtual network Editor

  This is my first time using machines virtual period. What I do is implementing a laboratory MCSE to follow certain CBT courses, I bought. I created a team of three virtual machines - two of them that are running WIndows Server 2003 and the other WIndows XP. The lab wants to use the following TCP/IP parameters for the three machines (Server1, Server11 and XP1)

  Server1:

  192.168 1,201

  255.255.255.0

  192.168.1.254

  11 server: 192.168.1.211 (same gateway and subnet as Server1)

  XP1: 192.168.1.1 (ditto for the door and the subnet as Server1)

  Primary DNS is set to 192.168.1.201 (Server1 is DNS server).

  Default VMWorkstation allowed me to ping both servers very well without any additional configuration. My problem is when I try to fix the DNS redirector on Server1. Any DNS server IP address that I plug in I could not get my XP box to get out of the Internet. I know it's a problem with my virtual network settings, I'm sure. Problem is I don't know where to start. Can someone point me in the right direction?

  Thank you!

  General things:

  You cannot use the IP address ranges which are used somewhere else, and that the host might be able to see.

  Type ' ipconfig/all' on the host and the glance to the adapter VMnet8. Suppose you see a 192.168.30.1 there. This means that your network VMnet8 address is 192.168.30.0/24 (24 =, displayed subnet mask as 255.255.255.0).

  Your DNS and gateway for virtual systems would be 192.168.30.2.

  You can check this in the editor of virtual network on the NAT tab.

  To change the range of network addresses VMnet8 you must use the virtual network Editor.

  1. go on 'host Virtual Network Mapping.

  2. click on the ">" beside VMnet8 and choose "subnet".

  3. change address you need. It's the network address, so the last digit (in your case!) should be 0. The address range should not be used elsewhere (physical network, VMnet1).

  4. click on 'apply '.

  5. When you click on the ">" again and choose DHCP or NAT you can see that all addresses have been changed accordingly.

  When you enter ' ipconfig/all' to the host, you will see that the VMnet8 host adapter has an IP address of your selected range with 1 node address (e.g. 192.168.1.1).

  The gateway and the DNS so its node address + 1 (192.168.1.2).

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• Problems in connection to the mobile network after upgrading to iOS 9.2.1

  Upgrade to iOS 9.2.1 Thursday last on my iPhone 5. Mobile connectivity random but frequent problems faced since then - just lose network connectivity and the phone displays "No. Service" for long periods. Are gone to lift (Airtel, India) and according to them they also received 100 + complaints of users after they upgraded to iOS 9.2.1

  Amit,

  I am also facing the same issue... its really frustrating... in my case is not at all happened to the network... do not know if everyone from apple to do anything

• How to set up the Windows network access program?

  original title: how to set up the N A P

  How to access my windows network access program

  Hi bryan stacy,.
   
  - What version of the operating system are you using?
  -Are you talking about in the center of network share or the network connection folder?
   
  If you are referring to the network connection folder, see the following link for more information:
  Work with the network connections folder

• problem witththe driver for the wireless network connection card

  Quite suddenly my laptop (Toshiba) could not connect to my Modem and printer. I can only connect to the internet with a cable connection to the modem. The printer reports no problem with the connection. Troubleshooting report 'Problem with the driver for the wireless network connection card.' Problems also with ISATAP MS Driver adapter and Teredo Tunneling adapter. Software could not solve the problem.  A technician online know-how also faled to solve the problem after an hour trying everything - uninstalling and reinstalling, etc. He thought it would be a virus even though I have several active antivirus programs. Any ideas? Should I chuck the laptop away and buy a new one?

  If, as you say, you have several active antivirus running programs, they will conflict with each other and you will have no protection

  Visit the support of Tosh, specific to your model, and reinstall the drivers for the chipset and wireless

• How can I remove a (problem when setting up a Repeater) network extension

  Hello

  When I tried to installed a Repeater (TP-Link, TL-WA901ND) of my iMac, it did not.

  But since then, my wifi name double in the list. And none of these two works...

  We installed the Repeater from a different computer, but now I'm the only person who is not able to connect to the network that we share. Probably due to mishandling, I did when I tried to install the Repeater of my imac...

  Do you know how it is possible to remove only the two networks of my system / list and restart from the beginning?

  Thanks a lot for your help!

  Have you tried to reboot your router with the Repeater of the dead fire? Or if all else fails then reset your router to the default settings, and then start over completely.

• problems re-connecting to the wireless network

  Running vista on new hp computer, printer is hp deskjet 3052 was that was connected and working just fine and all of our other computers on the home network wireless could access the printer. Lost connection for some reason after working for almost a year, now try to get it back. Ran test wireless network and wireless is lit, wireless work pass, under network, he said the network name (ssid found)... IN CASE OF FAILURE. So under the current confiruration it says network name (ssid not defined). How to reset it? We recently changed internet providers so I know that we need to define the new network on the rise but don't have the installation disc or the manual. Thanks for any help.

  Hello

  Please see the following document on how to configure the printer on the network.

  http://support.HP.com/us-en/document/c02722113

• WAP321 captive portal - impossible to set up the guest network connection

  Hello community.

  I use two WAP321 with the latest Firmware (1.0.6.2) in a cluster.

  Both are connected to a switch SG300-10 (FW: 1.4.1.3) in Mode of L3.

  The switch is connected to a router RV130 (FW: 1.0.2.7).

  The router has Inter-VLAN-routing active and static routes for my VLANS configured.

  To one of the Interfaces of the router is a connected DNS/DHCP server that manages the resolution of names and the dynamic distribution of IP4 for my network.

  In my network, I have different VLAN for customers, management, server, test and the WLAN clients.

  So far so good.

  I have install on the WAP321 cluster, an intern (VAP0) and a guest WLAN (VAP1) using the Setup Wizard.

  Delivery of DHCP and DNS lookups are ok for two wireless LANs.

  Settings WAP VLAN and IP4 address are:

  -untagged VLAN: enabled

  -untagged VLAN ID: e.g. 3

  -Management VLAN ID: the same without tag VLAN ID

  -IPv4 parameters are static in the ip range of the VLAN untagged

  -DNS server are set to manual for a server in VLAN 4 and to 8.8.8.8

  My problem is that I can connect to the WLAN comments but I never get the captive portal login screen.

  The First-Instance Association captive portal is set to VAP1.

  The Configuration of the Instance in captivity 'Vérification' is located in the local.

  A group and users are configured.

  The customer obtain an IP address in the host IP address range VLAN and can search names and IPS, e.g. www.cisco.com.

  If I try to open a Web site, and then I get the message that the server did not respond.

  Impatience on your part.

  Best regards

  Rainer.

  That's great. I'm glad to hear that.

  Eric Moyers

• set up the invisible network

  How do we establish an invisible network? No name should appear in the menu Wi - Fi network.

  There is no such thing as an 'invisible' network, but you can refer to what is called a "hidden" network

  Therefore, any number of free utilities are available on the Internet which will reveal a hidden network in seconds, so those who want to really see your network will not have problems to do very easily and very quickly.

  The idea of being 'hidden' network is pretty much an illusion, since the name of the network is still distributed by the wireless router. In addition, mobile devices like iPhones and iPads tend to have a time more difficult, try to connect to the network.

  If you still want to "hide" your network... and you have a router from Apple...

  On your Mac, open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort base station

  Click Edit in the window that appears

  Click on the Wireless tab at the top of the next window

  Click the Wireless Options button at the bottom of the window

  Enter a check mark in the check box create hidden network

  Click Save

  Click Refresh at the bottom right of the window and give the router airport a full minute to restart

• SONY NEX 5 - problem with setting of the shutter speed shutter priority mode

  Hello

  I strictly followed the instructions in the manual, but when I'm in the mode S (shutter priority mode), by the rotation of the wheel there is no change in the shutter speed and I don't know why.

  On the screen, above the wheel icon is written Tv.

  Please, advice me how to solve the problem. In that I'm wrong.

  The same situation that I have and with the Apperture mode.

  Thank you!

  HI ILesishki,

  I apologize for the inconvenience that was done to you. Let me see if I can help. I suggest the initialization of the device to its default settings to solve the problem. Just click on the Menu button, then choose Setup. Go to main settings and look for reset default. After the reset, turn the camera and see if the problem is still there.

  If so, I suggest to send the camera in for service. I recommend that you visit our Sony Global Web site for more information on contacting the Sony's Support centre in your area to http://www.sony.net/SonyInfo/Support/.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Problem to set up the temporary password

  Hello
  I have reset the password of any of our users. He received two letters, containing a temp url and another temporary password as usual.
  but he is not able to connect to the application and reset his password using temp url. Whenever he gets "sign in error: the link contains an invalid token '.
  Same prob was confronted by another user too but he got through it the second time reset the password.
  Can I know what could be the problem?
  any solution to this problem?

  Hi user10434678,

  Please check the user's role, for which you are resetting the password, includes the privilege * "reset password."
  If the role does not have the same privilege, it cannot reset the password of his user profile reset.
  Hope that this info will be useful for you.
  Feel free to ask for more!

  Aarti Gupta

  iWareLogic

• HP psc 1410 could not set up the wireless network

  I have a hp psc 1410, a desk, a laptop and a modem router combo and I'm trying to do it to where I can print to the wireless laptop, I read stuff online but can't seem to make it work. Help, please

  Oh, a USB to Ethernet Converter is not likely to work.  If so, your router or your ISP should tell you how to do this job.

  I'm sorry.

• problem with setting of the child fields

  Hi all

  I use this code for jde4.7. I'll have the field two custom bitmap and I stand ready on the other plain bitmap. in order to be simple, I just now targeting code to display the two bitmap using custom Manager, but it shows nothing. It's displaying empty me. Here is my custom handler code...

  HorizontalFieldManager hfm = new HorizontalFieldManager()
  {
      public void add(Field field)
      {
          this.add(_item1);//_item1 & _item2 is bustom bitmap field
          this.add(_item2);
      }
  
      protected void sublayout(int maxWidth, int maxHeight)
      {
          maxWidth =  Display.getWidth();
          maxHeight = Display.getHeight();
  
          System.out.println("In sublayout");
          System.out.println("Max Width "+maxWidth);//360
          System.out.println("Max Height "+maxHeight);//480
  
          int count = getFieldCount();//2
          Field field;
          System.out.println("Count "+count);
          for (int i = 0; i < count; i++)
          {
          field = getField(i);                        layoutChild(field,field.getWidth(),field.getHeight());
          setPositionChild(field, 50, 50);                    }
      }
  };
  this.add(hfm);
  

  He shows me the vacuum.

  but when I simply add

  Add (_item1);

  Add (_item2);

  He shows me the image.

  also, I want to add more to a bimap to specific position.

  As I mentioned above, the ways to use a picture as a background and putting fields on top of the background image are discussed in a number of other Threads.  The 'trick' is that the background image is not added as a BitmapField, it is painted directly on the screen, usually using paintBackground.  But the search for other Threads dealing with this - if you can't think in terms of research, try 'background image'.

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• Wireless acting funny after having removed the PC on the home network - router WRT54G

  Lately I had a strange problem with my wireless. Internet works fine on my laptop and computer laptop of my fiance, but I have the following questions:

  1 Vonage phone works not properly. When the phone rings, it rings a very long cycle, and then when we pick up, the line is dead.

  2 X - Box Live connection interrupts the connection once every 2 or 3 minutes about, constantly.

  3. I can't connect to my linksys config site, and when I ping 198.168.1.1, I get 100% packet loss.

  Here is my situation and how it has changed recently Wireless:

  Set - original up: Desktop connected to the linksys router, laptop of fiance the wireless, no problem at this stage. The modem is Motorola if it matters. Office calculated was used initially to set up the wireless network.

  Computer for office died and I bought my current laptop (which I use to write this post). I connected to the wireless network without existing, although during the first week, there was some notable slowly down on me and my fiance wireless from time to time. I played around with some parameters in the linksys config page and reset the router and things are back to normal.

  However, I recently bought an xbox wireless adapter and was very disappointed by the loss of connection. When I test the connection it says I am connected but my "NAT" is moderate. My config is set so that uPNP is enabled, but I still have this problem. At the same time, we noticed that our Vonage has been screwed up and had the above mentioned problem.

  Today, I tried to connect to the site 192.168.1.1 to access my linksys config page, but I can't access it and as I said, when I ping the IP, I got 100% packet loss.

  I'm at a total loss about what to do and I do not understand how internet our computer can act very well while having all these problems with XBL and Vonage.

  Any help is GREATLY appreciated. Please tell me if you need info to Add ' l and I'm going there as soon as POSSIBLE.

  To check the address IP connect a computer/laptop computer directly to the router on its ethernet port and click on Start > all programs > Accessories > guest... A black box will appear (command prompt)... In the command prompt window type ipconfig and press "Enter"... Look for Ethernet adapter Local Area Connection address IP, subnet mask, and default gateway...

  The address of a default gateway should be the IP address of your router...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - x.x.x.x (where x.x.x.x is the default gateway address), and then on enter. Let the empty user name & password use admin lowercase... It should open the configuration of your router... If it does not accept the default user name or the password then you need to reset your router to the factory settings...

  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  To open the NAT-

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and the type of box in 53, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (2) on the second line in the box, type Application in PQR, in the start box, type 88 and type of box in 88, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (3) on the third line in the box, type Application in XYZ, in the start box, type in 3074 and end in 3074 box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings...

  (4) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  5) click on Setup and change the size of the MTU to 1452 and click on save settings...

  (6) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (7) also assign addresses DNS on Xbox
  Primary DNS:-4.2.2.2... Secondary dns:-192.168.1.1

  (8) turn off your modem, router and Xbox... Wait a minute...

  (9) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

  IP address: part 192.168.X. [last intellectual property in your device] for example if static ip given to the unit's 192.168.X.10 get the last part and put it in the empty box...

  For the without wire that -.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...