Problem in the display of the icons on the screen of the device

Similar Questions

• How can I fix adapter Teredo Tunneling Pseudo-Interface of network problem that shows an indication of a problem in the Device Manager?

  I've never seen this problem before.  The yellow triangle with the exclamation point is visible on this network adapter called Teredo Tunneling pseudo-interface.  The driver update does not work, and apparently the last and the best driver is already installed for this device.  I tried to disable and searching for the hardware changes.  Whenever the device is displayed again with an indication of problems triangle and even yellow exclamation point.  It is said that the device cannot start.  I rebooted the machine to see if something has changed.  There can be no.
  I just uninstalled the device and scanned for hardware changes, but it has not been detected and remains missing under the network adapter category.  I ran diagnostic system provided by HP software, but nothing seems to be defective.

  Hello

   
   
  1. What is the code that you see under the status of the device and the exact error message?
  2 have you made changes on the computer before this problem?
  As you have already tried updating the drivers and still you face the same problem, you can try to uninstall the existing driver and manually download the stand-alone version of the driver and install it.
  Step 1: first of all, I would say you temporarily disable any security software and then try to install.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Step 2: Now try to install the drivers
  a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. identify the sound card, right-click on it and select Properties .
  c. go to the driver tab and click Uninstall to uninstall the driver associated with the device.
  Restart the computer and install the latest driver.
  Reference: Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  Get help with Device Manager errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
  Overview of Teredo

  http://TechNet.Microsoft.com/en-us/network/cc917486.aspx

   

   

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• Podcast OGG resume problems when the device has been turned off and on again

  Even if the rocket + is listed as support AAC, it seems it does not support AAC files over a certain length, otherwise some file size.  (Someone, is it a value of its own thread?)

  For this reason, I need to convert some podcasts to another file format before listening.  MediaMonkey standard appears to limit MP3 conversions (but I love the software otherwise) so I thought that I would like to convert it into OGG instead (and OGG seems to have a better rate of compression than MP3 anyway).

  I found it by listening to these podcasts I can pause successfully to create a restore point, and when I come back, it takes up very well, as long as the device has not been driven off the coast between the two.  If the unit has cycled and turn it back on, when I come back to try to resume, it tries (he lists even the index of screen time) but then says "no file type supported" and fails to resume.  I tested on my old Fuze and do not have the same problem.

  Others experiencing the same thing?  I want to make sure that if it is just a simple bug of Sandisk is aware of this and can provide a fix in a future update.

  BTW, I'm using firmware 1.32.00 (latest as of this post).

  This seems to have been fixed with the latest firmware.

• We get an error "there is a problem with the device' while trying to use it on the computer of Windows 8

  Sir... my model of computation used is ASUS Q500A and I also have the problem with my may even of them I also perform step u said in this forum, but may not work... my Windows I have used is windows 8. Please help me tnx

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/getting-an-error-theres-a-problem-with-your-camera/9c494984-1178-4C3F-884c-80ac750d3fa6

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem is usually caused due to hardware or driver related issues. I suggest you try to install the latest drivers for the camera on the Asus or Windows Update site and check if it helps.

  If the problem persists, then it would be better to contact Asus for more help on this issue. As this could be a problem with the hardware as well.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• This disc is should downloads to solve the problem of the device are not installed. (Code 28)

  This disc is should downloads to fix the drivers for this device are not installed. (Code 28)  There is no driver selected for the device information set or element.my pc works on windows 8.1 pro 64 bit model whose id is 15-e017AU. 

  Hello:

  I have attached the driver you need below in attachments.

  Go to Device Manager and click on the device that need pilots.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• No driver found for the new USB drives don't. No problem with the devices previously used.

  Hi, I can not install any "new" USB keys or USB external drives. The error is "driver not found".

  The thumb drives and external drives that I've used are working properly. The error is for the devices was not used in this machine.

  I tried to follow a tip on a site and deleted INFCACHE.1 (after creating a restore point), but it has not changed the behavior.

  Windows 7 32 bit.

  Kind regards

  Check if you have limited the available somehow drives... possibly VMWare has reserved
  the drive letters. Best is to check with the VMWare Support and forums.

  Look in Windows disk management and see if something is there.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Facebook Sdk problem in the device

  Hello!

  I m using facebook sdk in my application with the name of 'myapp' for example, it works very well in the bb Simulator, but when I m running my application in real aircraft (curve 8900) when it starts the main facebook sdk screen then I get popupscreen ask me permissions of the application 'MyApp need authorization...

  No idea why?

  Thank you

  As far as I know, you can't just change the permissions without him having guest (security). You can use the ApplicationPermissionsManager to check at the beginning of your program if it has all the necessary permits and then he invites just at the beginning instead of during the use.

• OutputStream problems on the device

  Hi all

  I try to open an OutputStream on a connection HTTP however, the code has never been this line:

  OutputStream out = con.openOutputStream ();

  When I test the same via the simulator using the MDS Simulator as my tunnel to the outside, everything works perfectly and complete speddily. Any ideas? Maybe there are a few best practices or something when it comes to working with HTTP and opening connection on BB... Here's my method that handles the creation of HTTP connections:

  public HttpConnection getHttpConnection (postData URLEncodedPostData) {}

  String _url = ""http://196.35.231.86: 8080/locationSpy/process.persistGPS;deviceside=true ";"

  String _Type = "application/x-www-formulaires-urlencoded;

  HttpConnection con = null;

  try {}

  con = (HttpConnection) Connector.open (_url, Connector.WRITE);

  con.setRequestMethod (HttpConnection.POST);

  con.setRequestProperty ("Content-Type", _type);

  con.setRequestProperty ("Content-Length", String.valueOf (postData.getBytes () .length));

  con.setRequestProperty ("User-Agent", "profile/MIDP-2. ("0 configuration/CLDC - 1.0");

  con.setRequestProperty ("Content-Language", "en-US");

  } catch (IOException ioe) {}

  System.out.println ("IOException Message:" + ioe.getMessage ());

  ioe.printStackTrace ();

  }

  return con;

  }

  Thank you!

  Schalk

  
  

• My computer has problems detecting the USB cords.

  As applications for title, my computer can detect things that I rarely connect into it. When I got to my new iPod touch 3 years ago, my computer it confused for a Kodak camera. I don't remember how I managed to finally recognize my iPod, but it does also with other things that I try to use. As my friend for example hard drive, it works perfectly well on his computer, but when hook us up on mine, my computer gives power to the light, but will not be displayed on my desktop. My keyboard also uses a USB cable, which only works in the USB slots at the front, because in the rear slots, my keyboard only works for about a week before he refuses to work for me and then I have to pass to the slot machines. Is there something wrong with my connection I can fix it?

  Try to buy a USB hub powered (one that plugs into your computer for its USB connection and which has also the power to the USB ports to plug into the extra wall) and see if that helps.  Some computers provide the power to the USB ports and this can cause problems with the devices.

  "Thane Marshall" wrote in the new message: * e-mail address is removed from the privacy... *

  As applications for title, my computer can detect things that I rarely connect into it. When I got to my new iPod touch 3 years ago, my computer it confused for a Kodak camera. I don't remember how I managed to finally recognize my iPod, but it does also with other things that I try to use. As my friend for example hard drive, it works perfectly well on his computer, but when hook us up on mine, my computer gives power to the light, but will not be displayed on my desktop. My keyboard also uses a USB cable, which only works in the USB slots at the front, because in the rear slots, my keyboard only works for about a week before he refuses to work for me and then I have to pass to the slot machines. Is there something wrong with my connection I can fix it?

• Installation of the device drivers for the Zune 8 GB using Windows Vista SP2 OS

  I try to install the Zune software installed on a laptop Acer of MS Vista with SP2.  The Zune player is a 8 GB model.  The Zune software is installed fine, but when Vista tries to install device drivers, it fails, asking me to contact the hardware vendor.  It is used to work on another computer running MS Windows XP with SP3.

  What can I do to make it work on Vista computer?

  Hi Midnightwreck,

  What is you receive the exact error message?

  Step 1: Examine the Windows Device Manager. To do this, follow these steps:

  (a) click Start, right-click computer, and then click Properties.

  (b) click on Device Manager. Click on the computer root icon and then click on Search the hardware changes in the Actions menu. Zune should be listed under portable devices.

  Note If the player has been incorrectly installed, Zune can be listed with a yellow exclamation point (!). Or, it may be listed under other devices as USB (Universal Serial Bus) device.

  (c) double-click Zune, and then click driver . The current version of the driver that is installed must be 4.2.58.0.

  If the Windows Device Manager indicates a problem with the device, or if the Player version that is installed is not the current version, you must update the driver. To do this, follow these steps:

  1. right click on Zune or a USB device , and then click Properties

  2. click on the tab driver , and then click Uninstall.

  3. If it is displayed, select delete the driver for this device, and then click OK.

  4. click on the computer root icon and then click on Search the hardware changes in the Actions menu.

  5 right click on Zune , and then click Properties

  6. Click tab driver , and then click set to update driver.

  7. click Browse my computer for driver software.

  8. click on Browse, find the program Files\Zune\Drivers folder, and then click OK.

  9. click Next.

  If you are prompted, click install.

  After the driver installation is complete, click close two times.

  Your Zune device is not detected by your computer or the Zune software
  http://support.Microsoft.com/kb/944909

  Step 2: Download and install the latest version of the Zune software, then check if the problem persists.

  You can follow the steps mentioned in the link below

  How to fix errors in the Windows device for the Zune device manager
  http://support.Microsoft.com/kb/953933

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer is no longer automatically recognizes all the devices inserted in the disks.

  My computer is no longer automatically recognizes all the devices inserted into readers, like a CD or SD card photo. Recently I bought a micro sd card for my phone, but when I insert in the USB port, it recognizes that no more. How to do that everything works again. I have XP Service Pack 2

  Hi Danny Bralski,
   
  -Did you change on your computer before this problem?
   
  Follow the steps listed in the order.
   

  Method 1: Check if the USB port is defective.

  If you connect a USB device to a defective port, the device will not work. Try connecting the device to a different port. If all USB ports are in use, disconnect one of the other devices and plug the problematic device into that port.

  Method 2: Check if there is a problem with the device.

  If you have another computer that is working properly, plug this computer to see if you encounter the same problem. If you have the same problem, there could be a problem with the unit.

  If you believe that your device is defective, contact the manufacturer.

  Method 3: Run the troubleshooter from the link given below:

  Hardware devices do not work or are not detected in Windows

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Impossible to update "site has encountered a problem and cannot display the page you are trying to show."

  When I try to update either using the can I Update or Microsoft Update I get the following message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "

  When I open Microsoft Security Essentials and click Update I get the following message: "the Virus and spyware definitions failed and an error code: 0 x 80070424 message.»

  I am unable to get the position of automatic updates to turn on. I followed a few threads that says run "services.msc" Background Intelligent Transfer Service is ongoing as is the workstation but automatic updates does not appear!

  I tried auto Fix It and automatic installation of updates, but still no luck.

  All the other programs on the seam of my computer for updated correctly. and seams of browser to work properly. I also tried dissabling my firewall and adding the site to my trusted sites update and that didn't work either.

  I'm on PC based on Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Build 2600 on a Toshiba X 86 vs

  Q: which antivirus application was installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE?
  A: I do not uninstall [McAfee Security Center before] I installed MSE...

  See...

  Checklist for installation of Microsoft Security Essentials
      http://answers.Microsoft.com/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

  Should I have any other antivirus software and Microsoft Security Essentials?
      http://blogs.msdn.com/b/securitytipstalk/archive/2010/09/08/do-i-need-both-Microsoft-security-essentials-and-another-antivirus-software-program.aspx

  ======================================

  You could try the following:

  [You may want to print these instructions for reference offline. [If a step said to restart, restart!]

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  1B. download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall McAfee Security Center & reboot.

  4. make sure that the Windows Firewall is now enabled.

  5. If S * PERAntiSpyware is always installed, uninstall it and reboot again. If not go to # 6's.

  6. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  7. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the automated troubleshooter from end to end. [1]

  9 restart a last time & test. Make absolutely certain that you can update MSE manually using the update on the update tab button.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

• Removal of security icon to remove a mounted cd/dvd drive that can not be delete. also the problem with the apple driver.

  Vista Home premium

  64 bit

  HP pavilion dv4-1220us

  It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed.  I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.

  RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.

  DOWN MY BIOS AND THE ICON IS STILL THERE.

  THIS SCANNER DRIVER AND THE ICON IS STILL THERE.

  Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.

  I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.

  1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.

  2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.

  At the moment I'd hide so I does not uninstall my cd/dvd drive.

  Do I need another hard drive?

  Is this something with the Bios?

  Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what?  This is the site about the problem to apple and the site of heavy plant driver.

  http://www.GearSoftware.com/support/drivers.php

  http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes

  http://support.Apple.com/kb/TS2308

  http://www.GearSoftware.com/wiki/index.php?title=drivers:_Windows_ - _Updating, _etc, _64_bit_versions, _removing

  Hi Mamalasting,

  I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.

  Reference:

  http://www.HP.com/#support

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.