OutputStream problems on the device

Similar Questions

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• Podcast OGG resume problems when the device has been turned off and on again

  Even if the rocket + is listed as support AAC, it seems it does not support AAC files over a certain length, otherwise some file size.  (Someone, is it a value of its own thread?)

  For this reason, I need to convert some podcasts to another file format before listening.  MediaMonkey standard appears to limit MP3 conversions (but I love the software otherwise) so I thought that I would like to convert it into OGG instead (and OGG seems to have a better rate of compression than MP3 anyway).

  I found it by listening to these podcasts I can pause successfully to create a restore point, and when I come back, it takes up very well, as long as the device has not been driven off the coast between the two.  If the unit has cycled and turn it back on, when I come back to try to resume, it tries (he lists even the index of screen time) but then says "no file type supported" and fails to resume.  I tested on my old Fuze and do not have the same problem.

  Others experiencing the same thing?  I want to make sure that if it is just a simple bug of Sandisk is aware of this and can provide a fix in a future update.

  BTW, I'm using firmware 1.32.00 (latest as of this post).

  This seems to have been fixed with the latest firmware.

• How can I fix adapter Teredo Tunneling Pseudo-Interface of network problem that shows an indication of a problem in the Device Manager?

  I've never seen this problem before.  The yellow triangle with the exclamation point is visible on this network adapter called Teredo Tunneling pseudo-interface.  The driver update does not work, and apparently the last and the best driver is already installed for this device.  I tried to disable and searching for the hardware changes.  Whenever the device is displayed again with an indication of problems triangle and even yellow exclamation point.  It is said that the device cannot start.  I rebooted the machine to see if something has changed.  There can be no.
  I just uninstalled the device and scanned for hardware changes, but it has not been detected and remains missing under the network adapter category.  I ran diagnostic system provided by HP software, but nothing seems to be defective.

  Hello

   
   
  1. What is the code that you see under the status of the device and the exact error message?
  2 have you made changes on the computer before this problem?
  As you have already tried updating the drivers and still you face the same problem, you can try to uninstall the existing driver and manually download the stand-alone version of the driver and install it.
  Step 1: first of all, I would say you temporarily disable any security software and then try to install.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Step 2: Now try to install the drivers
  a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. identify the sound card, right-click on it and select Properties .
  c. go to the driver tab and click Uninstall to uninstall the driver associated with the device.
  Restart the computer and install the latest driver.
  Reference: Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  Get help with Device Manager errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
  Overview of Teredo

  http://TechNet.Microsoft.com/en-us/network/cc917486.aspx

   

   

• This disc is should downloads to solve the problem of the device are not installed. (Code 28)

  This disc is should downloads to fix the drivers for this device are not installed. (Code 28)  There is no driver selected for the device information set or element.my pc works on windows 8.1 pro 64 bit model whose id is 15-e017AU. 

  Hello:

  I have attached the driver you need below in attachments.

  Go to Device Manager and click on the device that need pilots.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• No driver found for the new USB drives don't. No problem with the devices previously used.

  Hi, I can not install any "new" USB keys or USB external drives. The error is "driver not found".

  The thumb drives and external drives that I've used are working properly. The error is for the devices was not used in this machine.

  I tried to follow a tip on a site and deleted INFCACHE.1 (after creating a restore point), but it has not changed the behavior.

  Windows 7 32 bit.

  Kind regards

  Check if you have limited the available somehow drives... possibly VMWare has reserved
  the drive letters. Best is to check with the VMWare Support and forums.

  Look in Windows disk management and see if something is there.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• We get an error "there is a problem with the device' while trying to use it on the computer of Windows 8

  Sir... my model of computation used is ASUS Q500A and I also have the problem with my may even of them I also perform step u said in this forum, but may not work... my Windows I have used is windows 8. Please help me tnx

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/getting-an-error-theres-a-problem-with-your-camera/9c494984-1178-4C3F-884c-80ac750d3fa6

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem is usually caused due to hardware or driver related issues. I suggest you try to install the latest drivers for the camera on the Asus or Windows Update site and check if it helps.

  If the problem persists, then it would be better to contact Asus for more help on this issue. As this could be a problem with the hardware as well.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Facebook Sdk problem in the device

  Hello!

  I m using facebook sdk in my application with the name of 'myapp' for example, it works very well in the bb Simulator, but when I m running my application in real aircraft (curve 8900) when it starts the main facebook sdk screen then I get popupscreen ask me permissions of the application 'MyApp need authorization...

  No idea why?

  Thank you

  As far as I know, you can't just change the permissions without him having guest (security). You can use the ApplicationPermissionsManager to check at the beginning of your program if it has all the necessary permits and then he invites just at the beginning instead of during the use.

• Problem with recording devices and call issues

  Until recently I had a few problems with my microphone on Skype. Whenever I start my PC, everything will be fine, but every time I change the microphone source (from my webcam for stereo mix so I can play sounds in calls) and leave the call, I get weird questions. First if I still have the stereo mix as the source micro fine, but if I change it to my micro webcam when I click on answer call nothing happens and if I call someone it won't fail to connect and it will say: problem with the device registration, which is strange because it has nothing to do with the connection. Also if I change the source to microphone during a call, the call will be disconnected as if I turned on the internet and post something about the sound card errors. Can anyone help?

  I found the problem, clown fish was not working with Skype and it ceased to use the microphone and I thought since I had removed so I don't think that was the problem, but for some reason any, it is been installed, in any case I removed it and now Skype works fine.

• My computer is no longer automatically recognizes all the devices inserted in the disks.

  My computer is no longer automatically recognizes all the devices inserted into readers, like a CD or SD card photo. Recently I bought a micro sd card for my phone, but when I insert in the USB port, it recognizes that no more. How to do that everything works again. I have XP Service Pack 2

  Hi Danny Bralski,
   
  -Did you change on your computer before this problem?
   
  Follow the steps listed in the order.
   

  Method 1: Check if the USB port is defective.

  If you connect a USB device to a defective port, the device will not work. Try connecting the device to a different port. If all USB ports are in use, disconnect one of the other devices and plug the problematic device into that port.

  Method 2: Check if there is a problem with the device.

  If you have another computer that is working properly, plug this computer to see if you encounter the same problem. If you have the same problem, there could be a problem with the unit.

  If you believe that your device is defective, contact the manufacturer.

  Method 3: Run the troubleshooter from the link given below:

  Hardware devices do not work or are not detected in Windows

• My computer has problems detecting the USB cords.

  As applications for title, my computer can detect things that I rarely connect into it. When I got to my new iPod touch 3 years ago, my computer it confused for a Kodak camera. I don't remember how I managed to finally recognize my iPod, but it does also with other things that I try to use. As my friend for example hard drive, it works perfectly well on his computer, but when hook us up on mine, my computer gives power to the light, but will not be displayed on my desktop. My keyboard also uses a USB cable, which only works in the USB slots at the front, because in the rear slots, my keyboard only works for about a week before he refuses to work for me and then I have to pass to the slot machines. Is there something wrong with my connection I can fix it?

  Try to buy a USB hub powered (one that plugs into your computer for its USB connection and which has also the power to the USB ports to plug into the extra wall) and see if that helps.  Some computers provide the power to the USB ports and this can cause problems with the devices.

  "Thane Marshall" wrote in the new message: * e-mail address is removed from the privacy... *

  As applications for title, my computer can detect things that I rarely connect into it. When I got to my new iPod touch 3 years ago, my computer it confused for a Kodak camera. I don't remember how I managed to finally recognize my iPod, but it does also with other things that I try to use. As my friend for example hard drive, it works perfectly well on his computer, but when hook us up on mine, my computer gives power to the light, but will not be displayed on my desktop. My keyboard also uses a USB cable, which only works in the USB slots at the front, because in the rear slots, my keyboard only works for about a week before he refuses to work for me and then I have to pass to the slot machines. Is there something wrong with my connection I can fix it?

• Installation of the device drivers for the Zune 8 GB using Windows Vista SP2 OS

  I try to install the Zune software installed on a laptop Acer of MS Vista with SP2.  The Zune player is a 8 GB model.  The Zune software is installed fine, but when Vista tries to install device drivers, it fails, asking me to contact the hardware vendor.  It is used to work on another computer running MS Windows XP with SP3.

  What can I do to make it work on Vista computer?

  Hi Midnightwreck,

  What is you receive the exact error message?

  Step 1: Examine the Windows Device Manager. To do this, follow these steps:

  (a) click Start, right-click computer, and then click Properties.

  (b) click on Device Manager. Click on the computer root icon and then click on Search the hardware changes in the Actions menu. Zune should be listed under portable devices.

  Note If the player has been incorrectly installed, Zune can be listed with a yellow exclamation point (!). Or, it may be listed under other devices as USB (Universal Serial Bus) device.

  (c) double-click Zune, and then click driver . The current version of the driver that is installed must be 4.2.58.0.

  If the Windows Device Manager indicates a problem with the device, or if the Player version that is installed is not the current version, you must update the driver. To do this, follow these steps:

  1. right click on Zune or a USB device , and then click Properties

  2. click on the tab driver , and then click Uninstall.

  3. If it is displayed, select delete the driver for this device, and then click OK.

  4. click on the computer root icon and then click on Search the hardware changes in the Actions menu.

  5 right click on Zune , and then click Properties

  6. Click tab driver , and then click set to update driver.

  7. click Browse my computer for driver software.

  8. click on Browse, find the program Files\Zune\Drivers folder, and then click OK.

  9. click Next.

  If you are prompted, click install.

  After the driver installation is complete, click close two times.

  Your Zune device is not detected by your computer or the Zune software
  http://support.Microsoft.com/kb/944909

  Step 2: Download and install the latest version of the Zune software, then check if the problem persists.

  You can follow the steps mentioned in the link below

  How to fix errors in the Windows device for the Zune device manager
  http://support.Microsoft.com/kb/953933

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• "Détarer" problem with the Torch 9800/Device Simulator

  Hello everyone,

  Im a very strange problem with the Torch 9800 (OS 6).

  I have an application developed with 5.0 SDK. Throughout the process of synchronization of this app, there is a point he gets a. tar.gz file that is unziped. For this purporse (in fact, the tar part / "détarer"), we use a tar / "détarer" 'library' we found here in the forum (http://code.google.com/p/j2metar/). This library works fine in all phones with OS 5.0 that we try and even on the simulators of somo 6.0.

  But there seems to be a problem with the torch. During the uncompress, there are an exception, because what is the reading of the structure of the tar (from the industry), load the bytes that are invalid, corrupt, dirty, memory, and it fails.

  The strange thing of all is that if I have only the routine détarer to the file (in the torch), it works! But when I run all my sinchronization, which open and close httpconnections and process the file on some points (sometimes the same point, others of different) fails.

  My question is... are at - it a known bug, issue, etc. with the BONE of the torch (touch device)? Of course, the first thing that jump to mind is "my code is incorrect, memory leaks (in Java, but perhaps odd that a stream was not getting close properly)" and so on, but I can't seam to find the problem. And like I said before, this application works fine with the same file tar.gz in other devices like the 8520 OS 5, 9780 OS 6, 8900 (OS 5).

  IM completely stuck with this problem and any help/test will be greatly appreciated.

  Here some code, the method that makes him détarer and calls the détarer/tar library:

  public static boolean "détarer" (String tarFileUrl, String destUrl) bird Exception {}

  FileConnection fconn = null;
  FileConnection tarFileConn = null;
  TarInputStream tis = null;
  Boolean bRet = false;

  try {}
  fconn = (FileConnection) Connector.open (destUrl, Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn.mkdir ();   Create the folder if it does not exist
  fconn. Close();
  fconn = null;
              
  Create a TarInputStream
  tarFileConn = (FileConnection) Connector.open (tarFileUrl);
  TIS = new TarInputStream (tarFileConn.openInputStream ());
  tarFileConn.close ();

  Entry TarEntry;
  int count;
  data Byte = null;
              
  While ((input = tis.getNextEntry ())! = null) {}
  Count = 0;
  data = new ubyte [2048];

  fconn = (FileConnection) Connector.open (destUrl + entry.getName (), Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn. Create();   create the file if it doesn't exist
  else {}
  fconn. Delete();    Create a new
  fconn. Create();
  }

  OutputStream os = fconn.openDataOutputStream ();
                  
  While ((count = tis.read (data))! = - 1) {}
  OS. Write (data, 0, count);

  }
                  
  OS. Flush();
  OS. Close();
                  
  fconn. Close();
  fconn = null;
             
  }

  TIS. Close();
  TIS = null;
              
  bRet = true;
              
  } catch (Exception e) {}
  e.printStackTrace ();
  throw e;
  } {Finally
  try {}
  If (tis! = null)
  TIS. Close();
  If (tarFileConn! = null)
  tarFileConn.close ();
  If (fconn! = null)
  fconn. Close();
  } catch (Exception e) {}
  }
          
  Return bRet;
  }

  Thank you!

  Santiago.

  Hello

  It is a problem with the OS 6.  I've posted about this before here:

  http://supportforums.BlackBerry.com/T5/Java-development/reading-and-writing-file-on-torch-9800/TD-p/...

  Basically, corruption may occur if you write to the stream simultaneously in different threads.  The solution is to ensure that a single file operation is occurring at a given time.  Some people have had the chance to control the size of the buffer to something as a multiple of (64 * 1024)-1. e.g. 65535.  In addition, you can rinse after each write to the buffer.  I have had no luck with this, but others.  If you look at the bug in JIRA, there is also no activity on this:

  https://www.BlackBerry.com/jira/browse/JAVAAPI-1513

  Good luck!

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V