Problem in the edition of the 4K images...

Similar Questions

• H8-1447ez: problem with the recovery Image

  I have HP's ENVY h8 PC bought two years ago. Last week, I tried to update my OS to Win10 - in any case - I made the backup of the downloaded and installed on USB recovery Image Win10. Don't like it, then

  because win 10 deleted the entry of the new filming, I use my USB key to back to Win 8. After some problems, I successfully restored my old BONES, but it does not recognize the partition of

  the recovery Image - neither the original nor the USB.
  I mean, if I go to settings-> change the PC-> General settings-> delete everything and reinstal windows-> start-> Reset your PC-> next it says: cannot find the files needed

  Is it possible to fix this?

  Ladies and gentlemen: PROBLEM SOLVED...

  I have successfully restored my PC in its original configuration - if you want, I can write how separate article make (fix Recovery Manager and problem with Recovery Manager not seeing original missing recovery Image).

  @veilendank10: thanks for trying to help, but my problem is of a very different nature.

• Big problem with the D810 images

  I have a big problem with lightroom. He presents objects in images to avoid. An example is the following:

  

  The same image converted with Nikon ViewNX 2, does to 16 bit TIF and reimported into Lightroom is much better:

  

  Is there something I can do? Is there a problem with my settings? Is this a known on the side of lightroom problem? Will there be improvements corrections? This may be due to active d-lightning without knowing about this in lightroom?

  Thanks for any help and suggestions!

  There is a problem of Posterization with the camera matching profiles having Lightroom for the D810. This could well be her. As I know there is no update for those yet. Try a different camera such as Adobe Standard profile. If this resolves the Posterization that this question and you will have to wait for the next update of Lightroom to get updated profiles to update (I hope).

  > This can be caused by active d-lightning without knowing about this in lightroom?

  No, but it is advisable not to use all modes like this in camera when you use Lightroom or any other software gross non-Nikon because all that camera RAW isn't to underexpose it and save a statement to apply treatment HDR with Nikon raw software. Other software will not be able to read as the statement and it will make images appear underexposed because they are in reality.

• problems with the restore image on dreamweaver cs3

  I'm a GoLiver trying to learn Dreamweaver. I'm having a problem with the image of restoration on the bearing.  Here's the url

  http://www.allthegills.com/meadowcroftweb

  Not sure where I was wrong.

  Thanks for any help.

  The onmouse above and on the need to go in your href tag. You have them in your img tag. Should look like this

  

• Problem with the import image

  I'm having a problem with an image that is deformed when fired in Captivate.
  
  Here's the original image in PowerPoint:
  [IMG] http://img511.imageshack.us/img511/5215/originalinpowerpoint.jpg [line]
  
  Here are what Captivate 3 pulls inside:
  [IMG] http://img255.imageshack.us/img255/8338/problemincaptivate.jpg [line]
  
  Notice the right side of the red zone? As you can see, even if it is the only slide, without text, it always distorts. I tried as an animation and a background image, each time the same mistake.
  
  Any direction as to what I can hurt? Unfortunately, my company does not allow my update to Captivate 4, so I'm stuck here where I am at the moment be.
  
  I have appreaciate the assistance.

  Hi there Hexfyre

  I can't explain why it happens. But if it's a one, you could work around it by simply screen capture the image in PowerPoint and it burst in Captivate. Which should make an exact copy of what you see in PowerPoint.

  See you soon... Rick

• Problems with the updated images licensed library

  Images of Adobe are not updated in the library when a license always naked and the watermarks, unless it is downloaded to the desktop. When will this problem be resolved?

  It's slow the flow of work and extremely frustrating when the seamless integration was an important reason regarding, reason why we bought this package.

  Everyone knows about this problem?

  Go to Adobe Stock

  Hello

  Please see Stock troubleshooting: FAQ: how to solve problems with images of Stock?

  Hope that helps!

  Kind regards

  Sheena

• Problem with the uploaded images.

  Having a problem with images is uploaded to the site. On a page, I have a tag div set to a certain size, but if someone downloads an image that is larger that the size of the div ignores the div size The size of the div is 500px 500px. I even tried a table with a size of game and still no go. I thought to use the cfimage resize function, but go thinking thought that if someone downloads an image that is not more then500px X 500px it will prolong the size I put and can blur the image, so I guess that's a no.

  Is there a way to force the image to do not extend beyond the size, I put in the div?

  OK, let's say the user downloads the image to/home/user/www/uploads, and file name is avatar.jpg

  You can do this:

  <>

  action = "resize".

  width = "500".

  height =""

  source = "" #uploadfile # ""

  destination="/home/user/www/avatars/avatar.jpg".

  Overwrite = "true" >

  <>

  action = "move."

  source = "" #uploadfile # ""

  destination="/home/user/www/avatars/avatar.jpg" >

  If the avatar is on 500px wide, it resizes and puts it in the folder avatars (or wherever you want to go).  If this isn't the case, it just moves.  The 'userimage' in userimage.width is just the name = "" of the first tag . "  It can be anything you want, as long as it fits the name.

• Problem with the BLOB image recovery

  We are on Coldfusion 9,0,1,274733. I checked on "Enable recovery of binary large object (BLOB)" on the database, but the picture is always cut (3/4 in part gray). On our dev server, it works perfectly, our production server gives just partly gray images. I checked the settings of CF database between dev and production, and they are exactly the same. We rebooted the server, but still the same problem. It's like Coldfusion does not see tuning changes. Does anyone else have this problem?

  We have found the solution. Our production servers are in a clustered environment. You must enable "Enable recovery of the binary large object (BLOB)" at the level of the instance cluster. You will need to make this change on all instances in the cluster. I was only to 'local' level on each server in the cluster (which didn't work).

  In CF Admin:

  Enterprise Manager > Instance Manager > select the instance and select BLOB

• Problem with the documents/images being too large

  I can scan using the HP Officejet J3680, but the images are too large to email. I tried scanning the documents in TIFF files, PDF files, JPEG files, and they all do the same thing. I recently bought a computer from Gateway with Windows 7 already installed. My last computer has XP and worked very well with the same material. I updated the drivers and downloaded the HP Solutions Center, and nothing seems to help. I have cause to scan and send documents frequently and it is very frustrating.

  Looking for a parameter in the scanning software can specify a lower resolution.  Boulder computer Maven
  Most Microsoft Valuable Professional

• Problem of the disk image driver 6500 a

  When I try to download the driver, I get an error message saying "the following disk images could not be opened", and then listing the downloaded files and reason: not recognized. I made sure I chose the correct version of Mac OS x. No idea how I can download a driver for the printer works? OS x 10.6.8 OfficeJet 6500 has more.

  Hi MaJeRaHa,

  I understand that you have an Officejet 6500 has more that you try to install on a Mac using 10.6, but the download won't open. I'm sorry to hear what is happening, but I'll certainly do my best to help you.

  I just downloaded the software myself and he did open without error, so I'm wondering if maybe the download has been corrupted during the download process. Please try redownloading full feature software and drivers for your printer. If you get any other errors when you try to launch the HP Installer try to hold down the Control (Ctrl) on your keyboard and then click the HP installer with your mouse and select open (I had to do this on our Macs here) and then you should have a choice to click OK or open on the next pop-up window.

  Hope this helps, have a great weekend!

• Strange problem with the preview image paused in the two Source/program monitor

  

  I have updated to OS X El Capitan (impossible to uninstall El Capitan currently) and now whenever I'm on break on any image in first Pro CC 2015 (Source/program time) I get this strangeness of ideas? Once I hit the game everything is good and normal, once again but the second I stop playing, that it is this strangeness.

  Rendering the chronology did not jack and I deleted all my preferences / uninstalled and reinstalled the program also. Help please, I have two projects I need to finish but I can't do all the color currently fixes.

  See you soon,.

  Heads up on first with El Capitan

• Stabilizing warp CS6 scales down to the last image

  Hey,.

  Whenever I have add the Warp in Premiere Pro CS6 stabilizer, it auto-echelles of sequences, with the exception of the last image. It changes just to 100% once again, so I'll have to cut. Others affected by this problem, or of the ways to solve it?

  Thanks in advance.

  Edit: turns out it's probably not the stabilizer of the chain, but the position. When I set the position, the same thing happens, and as the stabilizer changes the position, the position will probably cause the problem. Key frames is disabled.

  Come discover something new, which makes it even more strange.

  The last shot of the clip using the effects on the other. I have classified the next clip completely red, just to check. And the last frame of the previous clip flushed as well. In addition, when a clip is not stabilized, it will say: 'click Anylize', with the exception of the last image.

  It seems to me that, instead of problems with the last image, it is probably the first frame of the next clip which is missing. So what is happening: the previous clip using the effects applied to the next item. I never came across something like this.

  Edit

  RESOLVED:

  Somehow, on each unique clip, the creation of keyframes for opacity is enabled. But there is no keyframes, and it is always 100%. When I change the value and go up 100%, the missing frame returns.

• How to do this: Photoviewer, Windows cannot save changes to the image due to a problem with the properties of the file!

  Hi, I'm trying to post a photo, but whenever I have try rotation to the right, it says something like: can't save changes to the image due to a problem with the properties of the file. My laptop is MS, but the photos were taken on the Iphone. How to do this?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Microsoft Digital Imaging Anniversary Edition-could not remove photos from the digital image library

  Microsoft Digital Imaging Anniversary Edition

  I have problems with digital imaging.  Never been wrong before, so I'm puzzled!  Recently added pix from CD to digital photo Image file picked up but did not display the photos on the page of digital image library - they come just under the icon standard w/o a view of the pix.  I tried to delete these files where the pix would not come to the top of the digital image.  Digital image would not remove them.  I deleted the pix of the computer files.  Digital image still would not remove the files in the library. I went into the Control Panel, I removed & reinstalled the Digital Image, but all files keep coming back.  Digital Imaging tells me I have 4000 photos stored there!  If I do, where are they?  I can't find them!   Is there something else I can do?

  I use Windows XP.  I've seen Info for Vista, but I need it for XP.

  I have problems with digital imaging.  Never been wrong before, so I'm puzzled!  Recently added pix from CD to digital photo Image file picked up but did not display the photos on the page of digital image library - they come just under the icon standard w/o a view of the pix.  I tried to delete these files where the pix would not come to the top of the digital image.  Digital image would not remove them.  I deleted the pix of the computer files.  Digital image still would not remove the files in the library. I went into the Control Panel, I removed & reinstalled the Digital Image, but all files keep coming back.  Digital Imaging tells me I have 4000 photos stored there!  If I do, where are they?  I can't find them!   Is there something else I can do?

  I use Windows XP.  I've seen Info for Vista, but I need it for XP.

  ========================================
  The MS Digital Image Library maintains a proprietary database
  named Pictures.pd3 who is not deleted when the program is
  uninstalled/reinstalled.

  If you rename Pictures.pd3 to Pictures.OLD... the next time you
  Open the library, it will be because it was the first opening.

  Windows XP... the Pictures.pd3 database file is located at:

  C:\Documents and Settings\.
  Local Settings\Application Data\Microsoft\
  POD\Pictures.Pd3

  If you can't find the file, open a file and
  Reach... Tools / Folder Options / View tab on...
  Tick... Display the hidden files and folders / apply / OK.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problem event name: ServiceHang name of the Service: Image name MEANING: sens.dll Image Version: 6.0.6001.18000 Type of Service: 20 Startup Type: 2 OS Version: 6.0.6002.2.2.0.768.3 locale ID: 1033

  Hello

  I am writing to find out if I've broken hardware or software corruption...?
  In the end, after I transfer files via a cable, I'm blocking this computer to do a clean install of Windows 7.
  ___________________________________________
  Windows NT Version 6.0 Build: 6002 SP2
  Product (0x3): Vista (TM) Home Premium Windows
  Edition: HomePremium
  BuildString: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Flavor: Multiprocessor Free
  Architecture: X 86
  LCID: 1033mama
  ___________________________________________
  Description
  Service System Event Notification Service hung on starting.

  Signature of the problem
  Problem event name: ServiceHang
  Service name: SENSE
  Image name: sens.dll
  Image Version: 6.0.6001.18000
  Type of service: 20
  Startup type: 2
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem
  Version.txt
  minidump.mdmp
  ___________________________________________

  Plain talk:
  The computer works well except there anyway any internet connection.
  As in not even one toe in the door more.

  Recovery is off, so no chance to try this.
  No virus is embedded.

  What I was doing?
  I was streaming a lot of Netflix for the last two weeks...

  I like to think that I run a pretty tight ship with this machine as in its 'own' (except recovery being off)...

  Toshiba Satellite A205 - S4607

  Device Manager shows everything is working normally. It would show if the equipment was broken?

  A month ago I noticed a bulge just above F7 to F11. The highest part being F9. It is just the plastic,
  but, obviously something had warm, yet, the machine worked very. When I discovered that it was the other
  morning after and streaming aircraft are asleep... computer had been just sitting there with remnants of
  'Dead' in the browser since ignored Netflix...

  So, back at the beginning of this email:
  "broken hardware or software corruption...?
  In the end, after I transfer files via a cable, I'm crashing this computer to do a clean install of Windows 7. »
  (or am I?)

  Thank you for any constructive comments,
  Tim

  Hi T9mothy,

  Method 1
  Device Manager would show if the driver for the hardware is corrupted or damaged which can be resolved by updating or reinstalling the driver. Try the steps from the following link to resolve the problem of the internet.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2
  SFC scanner. SFC will correct if you have corrupted system files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  If you have problems with the hardware, then you need to contact the manufacturer of the computer.

• Problem with the scale of the images during the import.

  I took 250 pictures which I've edited in a film in stop motion. However, I encountered some problems.

  The biggest problem is that when I imported the images in the timeline, they were strongly increased and not even centered in the frame. as you can see in this screenshot:

  

  It is a big problem. You would think that I wouldn't have to go through every signle image and resize it down to properly adjust the setting... good? She has not even centered which means that I have to scale and move and be very precise and it's going to take so many hours to do! What is the problem here, how can I do so that when I import images, they are at the right scale?

  problem 2: when I put the images in the scenario that they were 'backwards '. As in, the last image was the first in the chronology and the first image was the last. It's as if the program TRIES to make my life a living hell.

  Daniel, in order to solve your problem, in principle, you should not import your numbered stills in the form of unique images, you must import them as a sequence - tick 'numbered Stills' checkbox in the import and Bob from your uncle - PrPro dialog box will deal with all of these images as a single sequence.

  Go to Edit-> preferences-> Media-> Timebase of media for an indefinite period and desired default rate. In order to change the framerate of already imported image sequence select it in the project Panel, right-click and choose change-> interpret the film...

  Length default for still images is also set through preferences: Edit-> preferences-> General-> still Image default duration. To change the duration of all the stills in your timeline select all, right click, choose speed/duration and set the duration to 1 framework for example. Don't forget to check the Ripple edit, move the creeping Clips .