Problem installing device a1530n

Similar Questions

• Problem installing LAN USB adapter in a new copy of windows 2000

  After having reformatted my hard drive and install a new copy of window 2000, I'm having a problem installing device drivers.  When I enter the correct inf file path, it reports that this window has not found a driver for the device.  Whithout the possibility to connect to internet, I have exhausted all my options and still need to install several other drivers with the same problem.  help help help help

  Everything you try to use (you do not give the brand / model of the LAN USB adapter) made drivers for Windows 2000?

• IPod Classic 7 G 160 GB ' there was a problem installing this hardware: Apple iPod USB Device ".

  I have recently (June 2014) bought a brand new Ipod Classic 7 G 160 GB Model A1238.

  Whenever I connect via USB to a PC running XP SP3 and Itunes V10.0.7.2 it is always treated as if it were a new connection, i.e. "new hardware found". After trying to install it, it says so "cannot install this hardware" and "there was a problem installing this hardware: Apple iPod USB Device."
  I have also a 2009 16 GB Ipod Nano 4 G model 1285 and this is recognized by the PC whenever it is connected through the USB port itself.
  I connected the Ipod Classic 7 G to a laptop running Vista and Itunes V10.0.7.2 where the Ipod is recognized and installed.

  Even if the PC States that there is a problem installing the Ipod, it still appears in Itunes and I can download music to it and disconnect by using safe mode disconnect.

  PC XP SP3 - Ipod Classic
  I watched "Device Manager" under "Drives", the Ipod Classic is listed as an "Apple Ipod USB Device", but has an exclanation score against it.

  Right-click on the 'Apple Ipod USB Device' properties and the "Volumes" tab it shows the drive with the exact name and the size of the data, by clicking on the properties of "Driver" tab it says 'Unknown' driver provider, driver Date and Driver Version as being "not available". By clicking on the "Driver Details" properties, it shows a driver file-

  C:\WINDOWS\system32\drivers\PartMgr.sys, File Version 5.1.2600.5512 (xpsp080413-2108).

  Under "Device Manager" USB controllers, there is an entry for "Apple Mobile Devices USB Driver" and a "USb Mass Storage Device"

  The 'Apple Mobile Devices USB Driver' lists two drivers:
  C:\WINDOWS\System32\Drivers\usbaapl.sys and
  C:\WINDOWS\System32\usbaaplrc.sys

  The "USB Mass Storage Device" list a driver:
  C:\WINDOWS\System32\Drivers\USBSTOR. SYS

  PC XP SP3 - Ipod Nano

  I repeated the steps above with the Ipod Nano, connected to the PC and the driver provider is presented as Microsoft with the driver as 07/01/01 Date and Version of the driver as 5.1.2535.0.
  In the "Driver Details" properties, it shows TWO driver files:

  C:\WINDOWS\system32\DRIVERS\disk.sys AND meanings
  C:\WINDOWS\system32\drivers\PartMgr.sys.
  At the same time with the Version of the file 5.1.2600.5512 (xpsp080413-2108).

  The 'Apple Mobile Devices USB Driver' and "USB Mass Storage Device" are the same as for the Ipod Classic.

  I followed the procedure to remove Itunes and even the update to Itunes to V11.2.2 nothing works.

  I am aware that the system is also that XP can now be updated.

  So, why not not Windows Installer Ipod Classic and why the disk.sys driver does not appear

  According to the details of the pilot?

  Is the 7 G Ipod Classic not compatible with XP SP3?

  Yes it is compatible with XP SP3.

  Try asking in the forums of Apple iPod:

  https://discussions.Apple.com/community/iPod/ipod_classic?CategoryID=204

• Problems of device driver install CP1525nw

  have Windows Vista 64-bit and recently had to change wireless networks. Now I can't print to CP1525nw. I have tried to re-install/re-connect using the cd provided with the hardware, and more download drivers/software of hp/support (Basic or complete versions). The installation does not complete. Error message only I get is check the hp site for updated device drivers. No idea what I'm doing wrong. Camera works fine when connected with cable on my other computer (which has also changed with wireless networks).

  Specifically, the error message reads:
  "Windows encountered a problem installing the software driver for your device...". "The an installer for this device cannot perform the installation at this time", then I went on hp website.

  At a loss.

  Advice appreciated here.

  Hi oaklander,.

  Fatal error message

  Restore factory settings

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Problem installing software in FPGA

  Hello

  I bought an FPGA (9074).

  Following the help to get it runing it says I need to install the software using MAX.

  The device was found in MAX, the network configuration works.

  Right click on 'software '? "" remote systems "to add the basic software for operating the unit.

  I only get the first option (OR-RIO 3.1.0 minimal, January 2009), the others are grayed out, so he ends up with not a lot of functions in Labview to develop my program, I have no serial communication or the PID function for example.

  I'm using Labview 8.6.1.

  I have the module 9263 (analog output) and his work very well with the 9074.

  What should I do to be able to install a more complete set of software outside the minimum?

  Sandro

  Problem solved, any new, OR just last installed device driver.

  Thanks for the reply.

• HP Pavilion p 15-200nq: I have all sorts of problems in Device Manager...

  Hi, I bought a laptop pavilion p-200nq, I installed windows and now I can not install the LAN, wi - fi, network and I have all kinds of problems in devices like Device Manager unknown ethernet cotroller, network controller, pci device and video controller...

  I don't know if it is where I have to post but... I have a lot of problems... I don't understand.. need help

  Hello:

  You should be able to use the W7 x 64 drivers and software from the HP Pavilion 15z-p000 CTO Notebook PC on your model.  Do not use the BIOS or firmware files but because they are the specific model.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174451

  In addition to the information above, you will need to also install the AMD Chipset drivers and reboot in order to install the smbus and usb3 controllers.

  First driver on the list.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• Problem installing PCI-6220

  Hello

  I have problems installing a PCI-6220. The card has been installed a couple of years on a PC and rarely used. I withdrew from the it and connected to a new PC (Intel core i3 2.93 GHz, Windows7). After installing the card on the new PC in a first time, I could read the name of PCI6220 under 'Devices and interfaces' (in the program MAX) but I´d not been able to define it as a device. So I tried to remove the card and plug it in again and now the situation is even worse, I only see an "unidentified PXI system" in the program of MAX.

  Any idea what bad and what can do to make sure that the card does not work properly? As a reference, I need to connect to a CA-1000 enclosure housing a CB-68LPR device.

  Thanks in advance,

  G.

  Install the latest (9.3) DAQmx-drivers for your PCI, which could help.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2337

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• Windows XP installation causes the laptop restart on the installing devices portion.

  I have a HP dv9000 series, which came with vista and I decided to downgrade to XP. After having inserted the WinXP CD and continue with the installation of the configuration, starts about 39mins and then begins to install devices that gets stuck and then to halfway through the process and my cell phone begins to turn off and then back on. When he turns on the system begins to restart the same installation configuration and then turn back off the coast to the installation of devices.

  Ive google which could help for hours. things like type SHIFT + F10 and then type tskmgr.exe and ending the files of svchost.exe. This was do nothing. The computer restarts again to the installation of devices.

  I read it could be a driver, but that the cause could be could be?
  We hope to get this fixed a problem and thank you all who try and help me.

  You can get the best expert advice for laptop HP attending the Forum Notebook HP. Carey Frisch

• Problem installing HP Deskjet F2280 and Windows7

  Hi people,
  I have a problem installing my printer hp deskjet F2280 all-in-one printer. Its saying its compatible on the windows 7 and custom allow to be the command "run under...". ».  This printer is only 6 months old :(
  Anyone got around this problem yet?

  Thank you

  Hello SeaCos,

  Thank you for using the Microsoft Windows Vista Forums.

  If notifies you that it is not compatible with Windows 7, you need to contact HP support to see all the drivers compatible. Are you following the steps below to set up your printer? Please let us know status. Thank you!

  http://www.HP.com/SBSO/bussupport.html

  Windows 7 install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Open devices and printers, click the Start button, and then click the start menu, click devices and printers.

  Click Add a printer. In the Add Printer Wizard, click Add a local printer. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

  If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional. If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.) Perform the steps in the wizard and then click Finish.

• Problem installing HP tm2-2105eg wireless driver

  Hey all,.

  Recently, I formatted the drive of my HP laptop tm2-2105eg for a side-by-side windows/linux installation.

  First: this is not a problem of linux, it's windows, which I'll talk. Everything works fine with linux.

  My windows system (I installed a Windows 7 x 64 Enterprise system, which was provided by my University MSDNAA program) works very well, only my WLAN controller is not recognized.

  I tried to install all the drivers, I found on the support page for my laptop. Two driver installation programs Atheros told me, that the couldn't recognize any supported product. I also looked upward, which driver my Ubuntu system use (a driver for broadcom bcm 4313 chip set - which apparently Atheros sometimes used in their products). I also tried a Broadcom driver for the tm2-2200 for usa. He acknowledged my WiFi chipset, but I wasn't able to connect to my WEP WLAN network using this secure driver.

  My system:

  HP tm2-2105eg

  Windows 7 Enterprise SP1 (and Ubuntu 11.04, but it should be more or less irrelevant)

  Hopefully, there is a solution for this other than "read your backup, live only with windows or clean your hard drive and then resize it. Hopefully, I can work around this problem. However, wireless is vital for me, I need it in the halls of the University.

  Thanks for all your efforts in advance.

  Kind regards

  Philipp Freyer

  Hi, Philipp:

  See if this Broadcom driver works for your machine:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-90955-1&mode=4&IDX=1

  If not, please click the controller wireless problem in Device Manager. Then click on the Details tab. In the Properties window drop down on the list and select the second element (Hardware ID). After the first string you see here.

  Those who identify the manufacturer of the device and the device type and model. With this info, I can try and see if there is another driver that is needed.

  Paul

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

• Problem installing Adobe Revel 2.3.2

  Dear users of Revel:

  We are aware of any problems installing people are affected by the latest version of iOS, and we apologize for the inconvenience it has caused.

  We do rigorous testing before all releases, but unfortunately an unexpected interoperability problem occurred with the way our App is get bundled for delivery to customers. We are working closely with Apple to fix the problem as soon as possible, and we was again submitted to an update to see if that can help us fine-tune the failure. Thank you for your patience. In the meantime, feel free to Revel access via your web browser, Mac, 8 windows, Android devices.

  I will update this thread when I have new information.

  Kind regards

  Guinot

  Dear users of Revel:

  As you know, many users had questions Revel iOS update version 2.3.2 installation. We are pleased to inform you that the problem has been resolved. We know how frustrating it must have been to not be able to access your photos and videos and are very sorry for all the inconveniences.

  Visit the App Store and update your application and thank you for your patience as we worked to solve the problem. Please make sure that your operating system is on iOS version 7.1 or higher during the updating of the app. We do rigorous testing before all releases, but unfortunately an unexpected interoperability problem occurred with the way in which our application bundled up for delivery to customers.

  If you are unable to upgrade to iOS version 7.1 or above at this time and cannot load revel from the app store on your device, please download the latest version of the Adobe Revel app from iTunes on your computer and sync it to your iPhone or iPad. If you are unfamiliar with this process, please connect your iOS device to your computer with the USB cable provided with your device. Launch iTunes on your computer and select help > iPhone or ipad user guide. There are help topics explain how to connect and synchronize your device.

  If you have other questions or problems, please go to our User Forum and post it on this link: https://forums.adobe.com/thread/1513106.  Once again, please accept our most sincere apologies, and thank you for your patience.

  Team Adobe Revel