Problem installing software in FPGA

Similar Questions

• Problem installing software with a nonadministrator account

  Can I install software on my pc using a non-administrator account?

  Can I install software on my pc using a non-administrator account?

  Yes. IF and only if you have the admin password. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Problem installing software of Bluetooth Enhanced Data Rate II (v6.2.1.3100)

  Hello

  Today, I have improved some Lenovo drivers, including the bios v1.20. When I was upgrading software Bluetooth Enhanced Data Rate II to the 6.2.1.3100, offered on the page version drivers for t400s, I got the following error, almost at the end (sorry, the OS is in Dutch): "there there was an error during the installation of the political party...» ». See below:

  

  After that he has automatically restored the update, however probably not completely, because now when I reboot with active BT I get the following error, also in Dutch: "the program can't start because btwhidcs, DLL is missing from your computer. "You may be able to solve this problem in re - install the program.

  

  My backup files, I've restored the previous version 5.2.1.2900 Setup file, but am also unable to re - install and make two mistakes now. I must have been able to install 5.2.1.2900 with the previous bios, because it was the version I checked before you run the 5.2.1.3100 update!

  How can I solve this (apart from doing a full system restore). I would not be able to install the new driver properly? If this is not the case, how can I restore BTtray.exe then.

  Thank you, Jan

  Looks like there's a problem install the Visual C++ 2005 redistributable. You can try to install these first manually by using the links below:

  x 86 version:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200B2FD9-AE1A-4A14-984D-389C36F85647

  x 64 version:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=EB4EBE2D-33C0-4A47-9DD4-B9A6D7BD44DA

  Even if you are using Win 7 x 64 (assuming you are using Win7), according to me, you need the x 86 redistributable og version for this software. If you already have an earlier version of the redistributable installed, you might as well try to uninstall first and then reinstall Microsoft Download or try to install the BT software after uninstalling. So, you can try to uninstall the BT software and start again.

  If you already have version BT 6.2.1.1400 installed, you should ensure that you have a complete backup since this version had a serious bug when installing/uninstalling this version could wipe you HDD. I know that this is related to the 6.2.1.1400 only.

  -gan

• Problem installing software for all-in-one Deskjet F4210

  Hello.

  I have a problem when you install the software for my HP Deskjet F4210 all-in-One printer.

  First of all:

  • I am running Windows Vista Home Premium x 64.
  • I tried the 3 installation methods:

  (1) installation CD.
  (2) installation of downloadable x 64 Installer.

  (3) installation of downloadable x 32 Installer.

  I get the same error message (series) at each facility.

  I also tried each method of installation mode execution "Run As Administrator". Which is not exactly change the result.

  Just to try, I tried to install it on Windows XP, and it has worked very well with no error message.

  I don't know what the problem is, but I have screenshots with legends and a comment by each (to me) that explain everything.

  * Note: You can click ON the picture to SkyDrive show in its own window.

  Images:

  1) HP Installer screenshot 1

  2) HP Installer screenshot 2

  3) HP Installer screenshot 3

  4) Setup HP 4 screenshot

  If anyone can help, please do.

  I really hope that these screenshots can be useful.

  They are in order of appearance.

  Twitter: @mgarcher007
  
  My rig: HP Pavilion a6645f Special Edition: Verde.
  CPU: AMD Athlon 64 x 2 4850e @ 2.50 GHz
  RAM: 5.00 GB DDR2 800 MHz
  HDD1: 500 GB Seagate Barracuda, 32 MB cache
  HDD2: 1.5 TB Western Digital Caviar Green, 64 MB cache
  Optics 1: HL DVD-RAM
  Perspective 2: Pioneer BD-R/DVD-RW
  Graphics card: Single EVGA GeForce GTX 260 896 MB 448 - bit GDDR3 PCIe 2.0 (Yes, the card just fits, I have only one other device PCIe [a HDMI intensity Pro capture card] and I can't even keep the side panel of the computer, because the card sticks out.) I'm working on a mod for that matter).
  PSU: Ultra x 4 850w modular; SLI and CrossFire ready
  Various: Intensity Pro (HDMI capture card) for the capture of Xbox 360 and PS3 game and making game vids/fixtures.

  Hello

  You use Internet Explorer version 8? If so, uninstall Internet Explorer version 8, and then try reinstalling sw of the printer driver. You can reinstall Internet Explorer version 8 after you have reinstalled successfully the sw of the printer driver.

  

  Kiko

• Problems installing software hp after system recovery system

  I just replaced the motherboard due to the failure in an hp g60. I tried using the recovery of the system since the partition and the computer reboots after about 20 seconds in the hp software installation process. Then the system recovery screen would jump upward to want to me again the whole process. After 3 times to do, I did a scan of seatools hard disk and it tested ok. Then I thought that maybe there was a file corrupted on the partition, so I ordered the hp recovery discs. I ran these discs today and I got almost 3 quarters thanks to the installation of the hp software when a screen poped and told him to end the windows session and the computer restarted again. When he started upward, poped system recovery window back up and asked me to do it again. I'm looking for any help/suggestions on this subject. Thank you.

  Hello

  This could be the problem as HP recovery disks check for a "tattoo" on the bios to make sure that the operating system is installed on the machine, that it was intended.  One way to confirm this would be to install an OS on a retail disc - even if you don't activate - just to see if this will load ok.

  Best wishes

  DP - K

• Problems installing software JO 8600 pro hp as wireless on win 7 pro

  Computer no HP Officejet Pro 8600 Premium N911N, Win 7 Pro

  I installed the printer as wireless six months initially.  It worked without problem until a few weeks ago the scan function would no longer work.  The screen of the printer has an error message which I have omitted to write but as I recall it was a failure of communication and listed the possible reasons [3].  The print function worked fine.  Printing and scanning doctor froze after choosing to set the scan function.  I uninstalled the existing software to install the full features software, that I downloaded.  I was not able to reinstall the software from.  I chose the wireless connection and the software crashes when searching for devices, never find any yet the printer is connected to my network.  I repeated the process, more than a dozen times and times [2] the facility found the printer but has frozen shortly after that I chose and I continued.  I have to finish the program in the Task Manager.  I currently installed the device in USB and tried to convert wireless, still frozen.  Scan and Disk Doctor does not work because it says I don't have the full software installed.

  I'm sorry that the link does not work. I have re-posted here 'Windows 7: the Network Installation hangs on the control environment of the network screen'. Please let me know how the troubleshooting.

  Thank you.

• Problem installing software for a purchased HP2544 today

  Hi all

  I tried to install the software using the CD but I get a blue screen and memory dump came?

  I went to the HP website and downloaded the latest software and drivers for it, 64 - bit Windows 7, but I still get the same error during installation.

  I tried to install this several times tonight.

  Someone at - it ideas?

  Have never had this problem before installing any software in the past.

  Thank you very much

  Rob.

  Hello Robflyer3,

  Welcome to the HP Forums!

  I understand when you are installing the software from the CD or the HP website you receive an image screen blue/memory. I will do my best to help you!

  You connect to this printer wireless or USB?

  I need to know at what time the blue screen occurs during installation? Did you see an error message when this blue screen? If so, please send the code of error on this post.

  I would recommend a running System File Checker by following this Microsoft document here. This utility under Windows that allows users to find corruptions in Windows system files and restore the damaged files.

  I will seek forward at the hearing on your part have a good night!

• problems installing software hp photosmart c5180

  Hello my c5180 and my 64-bit windows 7 will not match

  It wil not install more software hp for printing / scan / copy.

  who can give an idea, s/help

  its starts with fr installation a few minutes later, gone is the installation screen.

  and nothing happens?

  I tried:

  AIO_CDA_Net_Full_Win_WW_130_140

  Thank you

  Hello jvdl,

  Welcome to the Forums!

  I saw your post on the questions you have install your Photosmart C5180 on your Windows 7 computer. I understand the installation will start, and then stop and disappear.

  I would suggest after each step from the document below to hopefully help you to install the software.

  On the Software Installation progress bar stops or crashes

  I hope this helps you!

  Good luck

• CP2025: Problem of software driver CP2025

  Problem installing software:

  Windows 7 (64 bit) on printer and custom pc worked fine. Installed the free download of Windows 10 and the problem started. SSD formatted and reinstalled Windows 7. Not able to install drivers CP2025, tried both original CD and downloads online.

  They would not install that it either I have tried. HP pilot program informed me that the system was not enough and that he would cease installation. What is extremely strange, given that the same pc was operational with printer and installed software.

  Any ideas?

  Just for starters I say I do assign assumptions when I write this while I am away feel free to ignore what I'm saying. Also your printer can not work properly with WIN 10 to what is a possibility as well.

  I'm willing to bet that the driver you download is a universal driver. Repeatedly universal drivers do not work like a PCL5, PCL6 or PS driver would be. In some cases when you go to the section drivers and downloads for your printer on the HP site, you can change the operating system to the different versions. Then you can possibly download an older version. If they are universals so sometimes you can shoot the pcl5 or 6 driver on the installation of the software they offer or on your cd. Open the archive zip 7 and in some cases, you can find a folder of drivers with the pcl5 or 6 drivers available.

  Perhaps few things to try.

• Error 1720 when installing software for usb modem

  Hello

  So I'm having a problem installing software called mobilink for my novatel usb wireless modem, actually it's not mine to someone else.  When installing the software directly from the usb port it will stop and say Error 1720.  He had the same problem with a modem former usb from the same manufacturer, but I managed to download the software directly from the manufacturer's website and installed without problem.  With the recent usb model, they do not offer the software online.  The Windows Installer is updated and saved, is this a problem with windows vista or any associated windows? It seems to happen during the installation of the usb modem.

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://support.Microsoft.com/kb/2438651/en-us

  It will be useful.

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• I have problem install photoshop5.5 and 6.0 software upgraded. The software, check error error message a future version of photoshop or ImageReady qualification has not been detected.   Please try again or cancel the installation if you have valid c

  I have problem install photoshop5.5 and 6.0 software upgraded. The software, future error message

  Error checking version of photoshop or ImageReady qualification has not been detected.   Please try again or cancel the installation if you have a valid copy of photoshop or ImReady that was detected.   Please call Adobe Customer Service.    . Someone help me please

  Phillip winter

  If I'm just remember, you need to enter your serial number of photoshop 5.5 when you install the upgrade photoshop version 6.

  The number that is on the upgrade to photoshop registration card 6 does not work for the installation of an update to photoshop version 6.

• Problem installing printer HP Netbook software

  Hello

  I have an all-in-one HP Photosmart Premium C309 printer and finds it difficult to install the printer on my new netbook software.  The printer software is installed on my HP desktop computer and two laptops in the House, all of which have naturally scanners for the Setup disk can naturally be used.  However, I believe to be impossible to install the HP software on my netbook to allow me to fully use the HP print utilities.

  I tried to download the correct complete package on the HP site.  It downloads fine and extracts, but then nothing happens.  I mapped optical drives on the desktop and a laptop to try and install the software from the CD that I have, but once I clicked on the configuration file, even once, nothing happens.

  My netbook runs Windows 7 starter edition, the desktop computer running windows 7 Home premium and the laptop is running vista.

  Help, please!

  Hello DazzaBee,

  The netbook has Windows 7 starter version installed and when we install the printer software it does not install software just like in Windows Vista or Windows 7 family premium.

  It's the Starter edition limitation and not a problem with the HP software. In the Starter editions only basic printer driver is installed. In order to check in "Devices and printers" under "Control Panel" If the printer icon whether or not written.

  For analysis, you must use MS Paint or Windows Live Gallery If the printer is connected using the cable USB. Link below will guide you with scanning:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan

  If the printer is networked is connected to a router, then we can scan using WebScan functionality:

  (1) open Internet Explorer or Firefox or Chrome

  (2) type the IP Address of the printer in the address bar and press ENTER.

  (3) under the "Scan" tab, click "WebScan.

  Note: We can only scan to JPEG or PDF formats.

  
  

• Satellite A200-1YO - problems installing Windows XP Home edition

  Hi guys,.

  First of all I'm new here so Hello to everyone here and I hope you can help me with my problems of software.

  I recently bought a laptop model Toshiba Satellite A200-1YO provided with windows vista (which must be frank, pants and IMO too demanding for the machine) and I have a problem with vista, because some of its features do not seem to work, for example, I'm having a lot of trouble getting some of the webpages to open now, they simply hang out.

  now, I didn't install windows xp but I don't have an external floppy drive. This is not a problem but because I can use Nlite to integrate the drivers in a new ISO of Windows XP.

  The problem is that I have 4 sets of drivers: ICH7M_32bit, ICH7M_64bit, ICH8M_32bit and ICH8M_64bit. As I install Windows XP 32-bit while I'm more or less some that I have not need 64-bit drivers but when I install Windows XP by using the modified version of windows xp slipstreamed, what I get at startup is a BSD error telling me that something has crashed on my hard drive , however I can't say which crashed as the screen disappears after 15 seconds if that so I guess there is something wrong with the drivers I use (though I must admit that I'm not sure the drivers 32-bit to use)

  advice and assistance regarding being able to install windows xp would be welcome, as I said above, however, I can only use Nlite since I do not have a usb floppy drive.

  Satellite A200-1YO has a chip with the ICH8M southbridge Intel GM965.

  So you need the driver for SATA ICH8M_32bit.