Problem installing jdeveloper

Similar Questions

• Problem installing JDeveloper 11.1.1.6.0

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to develop an application for Admission online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g version 11.1.0.6.0 is

  (2) the server application: Tuxedo 11 g

  (3) web Server: Web Logic 10.3.6.0 and JDK 1.7.0_09

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and Campus Solution 9.0.

  I just installed the 3 parties with WebLogic 10.3.6 and JDK 1.7.0_09 as below:

  (1) install ADR (Application Development Runtime) 11.1.1.6.0 (64-bit)

  (2) install the RCU 11.1.1.6.0 to create the scheme of OWSM_MDS (32 bit)

  (3) create a new WebLogic "Domain_CS" domain to develop the application for admission online.

  In order to develop the application for Admission online, I need to install JDeveloper 11.1.1.6.0. On the download page http://www.oracle.com/technetwork/developer-tools/jdev/downloads/archives-090457.html , there are 2 packages of JDeveloper for download:

  (1) JDeveloper 11 g 11.1.1.6.0 Studio Edition

  (2) Generic Java Edition 11.1.1.6.0 version

  just download JDeveloper 11 g 11.1.1.6.0 Studio Edition for Linux. But I read the Installation Guide http://docs.oracle.com/cd/E23943_01/install.1111/e13666/ojdig.htm#OJDIG139 article below:

  14 using Oracle WebLogic Server with Oracle JDeveloper

  Installation of Studio of Oracle JDeveloper 11 g Release 1 (11.1.1.6.0) also automatically installs Oracle WebLogic Server 11g Release 1 (10.3.5). Oracle JDeveloper uses this facility pre-configured as integration Oracle WebLogic Server, a server run by Oracle JDeveloper to test and debug your applications from the IDE. After the installation of Oracle JDeveloper, all what you need to start to develop, test, and debug web applications are installed and configured for you. no additional configuration steps are necessary for development purposes.

  In my previous post https://community.Oracle.com/thread/3891403?start=15 & tstart = 0 , Shay Shmeltzer-Oracle said the following:

  "install JDev in a new directory, it will not affect your existing WebLogic."

  "You don't need to install JDev WLS directory. What you end up doing, is take the application (EAR/WAR file) you create in JDeveloper and deploy in the WebLogic. JDeveloper will be in a separate Directory. »

  I just install JDeveloper 11.1.1.6.0 in my system as below:

  $./jdevstudio11116install.bin

  First, I choose an existing House/home/user/Oracle/Middleware Middleware to install, error message:

  «Error: the level of maintenance of the current Installer (WebLogic Server 10.3.5.0) product is not compatible with the level of maintenance of the product installed on your system (WebLogic 10.3.6.0).» Please get a compatible installer or perform maintenance on your system to get the level desired. »

  Second time, I create a new home directory /Install_JDeveloper_11.1.1.6.0 middleware to install. I select "Custom" install.

  There are 2 parts in the directory "Custom":

  Part I: JDeveloper and ADF: If this part, the second part is selected automatically.

  Part II: WebLogic Server: this part can be selected independently and without selecting the first part.

  This means that if we want to install the first part (JDeveloper and ADF), we need to install the second part of the (WebLogic Server 10.3.5.0).

  My questions are:

  (1) I have WebLogic Server installed 10.3.6.0 in my machine and WebLogic Server 10.3.5.0 don't need. Can we install only the first part (JDEveloper and ADF)? If so, how?

  (2) can we choose 'Generic version Java Edition 11.1.1.6.0' instead of 'JDeveloper 11 g 11.1.1.6.0 Studio Edition?

  Thanks in advance.

  I personally would install not directly as the directory root, but you can do it. I have my about 5 different versions Jdev installed in a folder with subfolders jdev

  11.1.1.6.0

  11.1.1.7.0

  11.1.1.9.0

  12.1.3.0

  12.2.1.0

  If I install 11.1.1.6 I choose /jdev/11.1.1.6.0 as the installation folder. The installation program will create them all other folders.

  Timo

• Problems installing JDeveloper

  Hello! I'm launching jdev_suite_121300_win64.exe, but I get an error: 'property not found in autorun.inf CMD'.

  After that, I decided to install manually.

  C:\JDev\Java\jdk1.8.0_45\bin\java.exe-jar C:\JDev\Disk1\install\modules\ora-launcher.jar DISKCNT = 1

  I got an error:

  Exception in thread "main" java.lang.UnsatisfiedLinkError: expected an absolute

  the library path: jni_winx64

  at java.lang.Runtime.load0(Runtime.java:806)

  at java.lang.System.load(System.java:1086)

  at com.oracle.cie.common.jni.JNIUtil.loadLibrary(JNIUtil.java:255)

  to com.oracle.cie.common.jni.Win32Registry. < clinit > (Win32Registry.java:2

  0)

  at com.oracle.cie.common.jni.WinRegistryHelper.createRegistry (WinRegistr

  yHelper.java:79)

  to com.oracle.cie.nextgen.launcher.PlatformHelper.isRegistryAccessible (p)

  latformHelper.java:200)

  to com.oracle.cie.nextgen.launcher.Launcher.checkPrivilege (Launcher.java

  (: 1107)

  at com.oracle.cie.nextgen.launcher.Launcher.execute(Launcher.java:3235)

  at com.oracle.cie.nextgen.launcher.Launcher.main(Launcher.java:3187)

  I set the CLASSPATH environment variables, PATH, TEMP, TMP = C:\JDev\Disk1\install\modules\

  but that has not solved the problem.

  I solved simply. I don't know why java-jar only accepts the relative path.

  I just launched

  \Java\jdk1.8.0_45\bin\java.exe-jar install/modules/ora-launcher.jar DISKCNT = 1 JRE_COMPONENT = oracle.jdk, oracle.jre

  path: C:\JDev\Disk1

• Problems installing jDeveloper - launch ERROR: no such file or directory

  Hello, I am trying to install the 64-bit version of jDeveloper Windows 12 (jdev_suite_121200_win64.exe)

  At the beginning of the installation, an error window appears saying:

  Launch ERROR: no such file or directory

  Thanks a lot for any assistance!

  Figured it out.  Solution validation for other credit issue.

  Need to run as administrator by the article below. Windows 7 x 64, just right click on the exe jDeveloper and choose 'run as administrator '. »

• problems installing Jdeveloper on Yosemite

  Yosemite 10.10.5 version (14F1021)

  Jdev: Oracle JDeveloper 11 g (11.1.1.7.1) (Build 6557.5)

  Error:

  VSKUMAR-java of $ mac: download vskumar-jar jdevstudio11117install.jar

  Extracting 0%.................................................................................................... 100%

  Exception in thread "chmodFile" java.lang.Error: unix is not a supported operating system platform.

  to java.lang.UNIXProcess$ Platform.get (UNIXProcess.java:164)

  to java.lang.UNIXProcess. < clinit > (UNIXProcess.java:168)

  at java.lang.ProcessImpl.start(ProcessImpl.java:130)

  at java.lang.ProcessBuilder.start(ProcessBuilder.java:1029)

  at java.lang.Runtime.exec(Runtime.java:620)

  at java.lang.Runtime.exec(Runtime.java:485)

  at com.bea.plateng.common.util.Chmod.chmod(Chmod.java:71)

  at com.bea.plateng.common.util.Chmod.wildcardChmod(Chmod.java:110)

  at com.bea.plateng.common.util.Chmod.wildcardChmod(Chmod.java:104)

  at com.bea.plateng.wizard.installer.utils.chmod.ChmodHelper.chmodFromDefinition(ChmodHelper.java:98)

  at com.bea.plateng.wizard.installer.silent.tasks.ChmodFileTask.execute(ChmodFileTask.java:80)

  at com.bea.plateng.wizard.installer.silent.tasks.ChmodFileTask.run(ChmodFileTask.java:75)

  at java.lang.Thread.run(Thread.java:745)

  installation JDK6 worked. Looks like JDK6 only

• Problem with Jdeveloper 11g R1

  Hi all
  
  I use Jdeveloper 11.1.1.6.0 version installed in Windows 7.
  
  The problem, I do face is - any changes in my application is non-reflecting. I am able to generate EAR successfully and able to deploy on the server weblogic successfully. But when I run the application its projection towards the top of the earlier application and my recent changes do not appear.
  
  I did it after to fix it. But no luck.
  
  (1) closed the jdeveloper.
  (2) uninstalled jdeveloper.
  (3) delete the folder "c:\oracle\Middleware". While it is created again.
  (4) deleted the folder "< myuserprofile > \appdata\roaming\jdeveloper. While it is created again.
  (5) installed Jdeveloper
  6) increased memory c:\oracle\Middleware\jdeveloper \jdev\bin\jdev.conf - XX: MaxPermSize = 256 M - XX: MaxPermSize = 512 M
  (7) memory an increase of c:\oracle\Middleware\jdeveloper\ide\bin\ide.conf-Xmx640M to-Xmx925M
  (8) given in the system market.
  (9) open Jdeveloper.
  (10) added to the Jdeveloper application
  (11) built on demand and deployed on the server.
  (12) tested the app
  
  But its still showing the old application.
  
  Somewhere the data get collected in the previous application.
  
  Can someone quickly to help me and me to solve the problem, please :(
  
  
  Thank you
  Sneha

  You forgot a step that could make the difference:
  Delete the files of all the projects involved in your application classes (from the operating system).

  A simple construction or reconstruction is not enough to kill the internal memory and the old classes. Often older class files are in the folder classes and you get weird results. It is not necessary to remove the entire jdev. Cancellation of the deployment of the application, to remove records of classes and reconstruction should be sufficient.

  Timo

• Problem installing device a1530n

  Running Win XP Media Center Edition.  Had minor graphical problems at the top of the IE bar periodically endangered.  Decided to remove the Intel (r) 82945G Express Chipset adapter in Device Manager and then do a scan for new hardware.  And now I get the message of the new hardware detected that says.

  Cannot install this hardware

  There was a problem installing this hardware:

  Intel (r) 82945G Express Chipset Family

  An error occurred during the installation of the device

  Access is denied.

  I am connected to the computer as an administrator.  I tried to install this even in safe mode and get the same error above.  Any clues on what do I do?  The computer runs only in VGA mode.

  Thanks in advance.

  Link to screen shot of the error message.

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• Problem installing PCI-6220

  Hello

  I have problems installing a PCI-6220. The card has been installed a couple of years on a PC and rarely used. I withdrew from the it and connected to a new PC (Intel core i3 2.93 GHz, Windows7). After installing the card on the new PC in a first time, I could read the name of PCI6220 under 'Devices and interfaces' (in the program MAX) but I´d not been able to define it as a device. So I tried to remove the card and plug it in again and now the situation is even worse, I only see an "unidentified PXI system" in the program of MAX.

  Any idea what bad and what can do to make sure that the card does not work properly? As a reference, I need to connect to a CA-1000 enclosure housing a CB-68LPR device.

  Thanks in advance,

  G.

  Install the latest (9.3) DAQmx-drivers for your PCI, which could help.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2337

• Problem installing LAN USB adapter in a new copy of windows 2000

  After having reformatted my hard drive and install a new copy of window 2000, I'm having a problem installing device drivers.  When I enter the correct inf file path, it reports that this window has not found a driver for the device.  Whithout the possibility to connect to internet, I have exhausted all my options and still need to install several other drivers with the same problem.  help help help help

  Everything you try to use (you do not give the brand / model of the LAN USB adapter) made drivers for Windows 2000?

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• IPod Classic 7 G 160 GB ' there was a problem installing this hardware: Apple iPod USB Device ".

  I have recently (June 2014) bought a brand new Ipod Classic 7 G 160 GB Model A1238.

  Whenever I connect via USB to a PC running XP SP3 and Itunes V10.0.7.2 it is always treated as if it were a new connection, i.e. "new hardware found". After trying to install it, it says so "cannot install this hardware" and "there was a problem installing this hardware: Apple iPod USB Device."
  I have also a 2009 16 GB Ipod Nano 4 G model 1285 and this is recognized by the PC whenever it is connected through the USB port itself.
  I connected the Ipod Classic 7 G to a laptop running Vista and Itunes V10.0.7.2 where the Ipod is recognized and installed.

  Even if the PC States that there is a problem installing the Ipod, it still appears in Itunes and I can download music to it and disconnect by using safe mode disconnect.

  PC XP SP3 - Ipod Classic
  I watched "Device Manager" under "Drives", the Ipod Classic is listed as an "Apple Ipod USB Device", but has an exclanation score against it.

  Right-click on the 'Apple Ipod USB Device' properties and the "Volumes" tab it shows the drive with the exact name and the size of the data, by clicking on the properties of "Driver" tab it says 'Unknown' driver provider, driver Date and Driver Version as being "not available". By clicking on the "Driver Details" properties, it shows a driver file-

  C:\WINDOWS\system32\drivers\PartMgr.sys, File Version 5.1.2600.5512 (xpsp080413-2108).

  Under "Device Manager" USB controllers, there is an entry for "Apple Mobile Devices USB Driver" and a "USb Mass Storage Device"

  The 'Apple Mobile Devices USB Driver' lists two drivers:
  C:\WINDOWS\System32\Drivers\usbaapl.sys and
  C:\WINDOWS\System32\usbaaplrc.sys

  The "USB Mass Storage Device" list a driver:
  C:\WINDOWS\System32\Drivers\USBSTOR. SYS

  PC XP SP3 - Ipod Nano

  I repeated the steps above with the Ipod Nano, connected to the PC and the driver provider is presented as Microsoft with the driver as 07/01/01 Date and Version of the driver as 5.1.2535.0.
  In the "Driver Details" properties, it shows TWO driver files:

  C:\WINDOWS\system32\DRIVERS\disk.sys AND meanings
  C:\WINDOWS\system32\drivers\PartMgr.sys.
  At the same time with the Version of the file 5.1.2600.5512 (xpsp080413-2108).

  The 'Apple Mobile Devices USB Driver' and "USB Mass Storage Device" are the same as for the Ipod Classic.

  I followed the procedure to remove Itunes and even the update to Itunes to V11.2.2 nothing works.

  I am aware that the system is also that XP can now be updated.

  So, why not not Windows Installer Ipod Classic and why the disk.sys driver does not appear

  According to the details of the pilot?

  Is the 7 G Ipod Classic not compatible with XP SP3?

  Yes it is compatible with XP SP3.

  Try asking in the forums of Apple iPod:

  https://discussions.Apple.com/community/iPod/ipod_classic?CategoryID=204

• Problem installing disktop 800 wireless drivers for windows xp

  Problem installing disktop 800 wireless drivers for windows xp

  Hi Samir,

  I see that you are unable to install the drivers disktop 800 wireless. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the error you get when trying to install the driver?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  Wireless and wired network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• Problem installing KB2728973 ' Unathorized digital certificates could allow spoofing "which was released 10JULY2012

  Has anyone had a problem installing KB2728973 ' Unathorized digital certificates could allow spoofing "which was released 10JULY2012?  I could not this patch to run after double-clicking on it.  This was true for XP SP3 and Server 2003 SP2.  Your comments are appreciated.  By-the-way, I met all three requirements that are suggested in the section "Known issues" section of Microsoft.

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  ===========

  It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver