Problem installing Oracle 11g reports

Similar Questions

• install oracle 11g r2

  Hi people, please specify a good link to install oracle 11g r2 on the computer windows XP client
  
  and also the steps how to install
  
  Thanks in advance

  Salvation;

  All the installation guide canbe to 11 doc librart g which is available at:

  http://www.Oracle.com/pls/db112/homepage

  Also, see, and check below doc of steps the thread mention etc.

  11 GR 2 on Windows XP installation problem
  Re: problem installing 11 GR 2 on Windows XP

  Respect of
  HELIOS

• How clearup unsuccessful installing oracle 11g R2 on redhat linux 5

  Hello world
  
  Try to install oracle 11g R2 on the test server Red Hat linux 5 (according to the quick installation guide), I did the following tests:
  
  trial (1): failed by giving the file not found error. I discovered that I need to I have unzipped the source files in a dir.
  (2) trial: failed because there is no static IP address
  trial (3): failed because that/etc/hosts was not set correctly.
  
  the installation was supposed to be in default dir/home/oracle/app
  the problem is that before every test I just renamed app app_old and once again the new installation with the default settings.
  
  I have now to clearup this whole mess, I know this isn't simply deleting the directory created, because I need to free the RAM memory reserved for the crteated of databases in all previous installations.
  
  Help please,
  Thanks for your time

  Hi Alain;

  Similar topic discussed here before. Please check:

  Uninstall db Oracle 11 g r1 OS linux 5
  Uninstall db Oracle 11 g r1 OS linux 5

  How do I uninstall datbase 11g
  How do I uninstall datbase 11g

  Respect of
  HELIOS

• Installing Oracle 11g Release 2 on Centos

  Hello

  I just bought a cloud computing system and wish to install oracle 11g. My OS is CentOS / 6.0 - 64 and minimal for the CCI. Can you please any good tutorial/doc to install it?

  Thank you in anticipation

  ChristyH. wrote:

  Is there someone who can install oracle for me?

  Best regards

  You will need to find consulting companies in your area to do it. If you always use CentOS, they recommend most likely you are using a supported operating system version

  HTH
  Srini

• Installing oracle 11g (RAC) on RHEL 6

  Dear all,
  
  
  Me and my team will install oracle 11g (RAC) on RHEL 6.
  About mention above I have little doubt it please help me out in this matter.
  
  In the network section.
  
  Requirement of intellectual property:
  
  1 public IP address
  2 private IP
  3. virtual IP address
  
  Suppose we have two interfaces in each server, eth0 and eth1.
  
  I put the public IP address in eth0 192.9.25.100 and private 10.79.1.100 eth1 IP address
  Now where put the virtual IP address and what is the procedure.
  
  Please help me to set the virtual IP address
  
  
  Thanks and greetings
  Yvon Das
  S/n, Guwahati
  
  Published by: Yvon on 23 May 2013 23:44

  Hello

  See the message below:

  http://www.Oracle-base.com/articles/11g/Oracle-DB-11gr2-RAC-installation-on-Oracle-Linux-6-using-VirtualBox.php

  If you need clarification update here.

  Thank you
  A H E E R X

• Install oracle 11g Client in an application server (HP - UX 64-bit operating system)

  I'm going to install oracle 11g client in an application server (HP - UX 64-bit operating system)
  I have to create the new mount for client installation point?
  Through the application server, I will access (rac) database server.
  
  I have enough space available in / or root mount point.
  I have space in / opt mounting point, can I make a directory in/opt/OU1/app and install the client at this place in the access database?
  
  
  
  Thank you
  Solaiman

  876149 wrote:
  I'm going to install oracle 11g client in an application server (HP - UX 64-bit operating system)
  I have to create the new mount for client installation point?
  Through the application server, I will access (rac) database server.

  I have enough space available in / or root mount point.
  I have space in / opt mounting point, can I make a directory in/opt/OU1/app and install the client at this place in the access database?

  Thank you
  Solaiman

  You can install in any desired point of installation/directory. Oracle does not give a flying fig this topic. Just put it somewhere that makes sense.

• Help me! Impossible to install oracle 11g on ubuntu

  Hello I am a student, I am a student of oracle database 11g, but I encountered a bug like
  http://Nguy-Hiem.co.cc/12.PNG
  
  I try to fix it and I start fixup.sh, but
  
  root@hieukenpro-virtual-machine:/tmp/CVU_11.2.0.1.0_oracle#./runfixup.sh
  Answer file used is:./fixup.response
  Activate used file is:./fixup.enable
  Location of the log file:./orarun.log
  *. ' / fixup.response: line 11: Unexpected EOF while looking for matching ' ' ' *.
  *. / fixup.response: line 12: syntax error: unexpected end of file *.
  *. / fixup.response: line 12: warning: syntax errors in. or eval will cause future versions of the shell to abandon as Posix requires *.
  Definition of parameters of the kernel... *.
  * uid = 1001 (Oracle) gid = 1001 (oinstall) groups = 1001 (oinstall), 1002 (dba) *.
  * oracle hard nproc 16383 *.
  * Couldn't find /etc/security/limits.conf or answer fichier.* MAX_PROCESSES_HARDLIMIT
  * oracle hard nofile 65535 *.
  * Couldn't find /etc/security/limits.conf or answer fichier.* FILE_OPEN_MAX_HARDLIMIT
  * oracle soft nofile 1023 *.
  * Couldn't find /etc/security/limits.conf or answer fichier.* FILE_OPEN_MAX_SOFTLIMIT
  
  so, what should I do?
  Thank you!
  
  Published by: 837251 at 16/02/2011 05:14
  
  Published by: 837251 at 05:17 16/02/2011

  Oracle 11g does not support Ubuntu. It can be installed, but it requires around Word:

  Re: Installing Oracle 11g R2 on Howto Ubuntu 10

• Problems with Oracle 11g R2 XE

  Hi guys,.

  I had a problem and have to solve for abt a week now and tried a lot of solutions.

  My environment:

  Windows 7 Professional SP 1 64-Bit

  AMD Phenom II x 4 940 @3.0 GH

  4 GB of RAM (in use during the installation of 40%)

  The Windows Firewall is enabled (but oracle.exe and lstnr.exe are configured as an exception)

  Avast! FREE Antivirus Version 2014.9.0.2018

  Installation (both times with the same result):

  Installed O 11g 64-Bit XE in two different ways:

  I was logged in with user lies in Admingroup

  Installation started via right click with administrationprivileges

  I activated the Administrators account and logged with adminprivileges.

  After that, I installed the 11g XE 64 bit

  between the two steps I cleaned and restarted my system, register was too empty and the file has been deleted manually

  as a first step, I get this problem: Windows cannot find " " http://127.0.0.1:%HTTPPORT%/Apex/f?p=4950 "

  -> Manually changing HTTPORT % to 8080

  -> now I could double-click the shortcut, Firefox/IE/Chrome opens but 404 not Found error is returned

  -XracleXETNListener OracleServiceXE, both are running

  [code]

  C:\Windows\System32 > lsnrctl status

  LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on November 4, 2014 18:02

  : 56

  Copyright (c) 1991, 2014, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))

  AMT-12541: TNS:no listener

  AMT-12560: TNS:protocol adapter error

  AMT-00511: no listener

  Windows 64-bit error: 2: no such file or directory

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = D³rsinKurt-PC)(PORT=1521)

  )))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  TNSLSNR for Windows 64-bit version: Version 11.2.0.2.0 - Prod

  ction

  Start date November 4, 2014 13:53:50

  Uptime 0 days 4 h 9 min 9 s

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener log file C:\oraclexe\app\oracle\diag\tnslsnr\D³rsinKurt-PC\list

  ener\alert\log. XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = D³rsinKurt-PC)(PORT=1521)))

  The listener supports no services

  The command completed successfully

  [/ code]

  If Listenerservice is up and running, but I can't find the http Service 8080 with netstat-a

  so I started to study a little more:

  Registryfolder: HK_LOCAL_MACHINE\SOFTWARE\ORACLE is installed

  following subdirectories are installed: KEY_XE, ODP.NET, OracleMTSRecoveryService

  What I tried (both ways, with and without adminstrationprivileges):

  I created two new DWORD values in KEY_XE ORACLE_SID_AUTOSTART and - STOP both to true and stopped and started services, nothing changes.

  Inserted the two users (Administrator and normal user) in the Group ORA_DBA, nothing changes, even tried to set and the new

  you wanted to connect to sqlplus using the console:

  C:\Windows\System32 > sqlplus system

  SQL * more: Production version 11.2.0.2.0 on 4 Nov 18:09:21 Di 2014

  Copyright (c) 1982, 2014, Oracle.  All rights reserved.

  Enter the password:

  ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Process ID: 0

  Session IDs: serial number 0: 0

  Enter the user name:

  When I start directly at the sqlplus prompt and write the start of the command I got the following msg: ORA-01031: insufficient privileges

  I looked in the folder ORA_BASE and looked at the oradat file, it contains a XE-folder that is empty, the admin folder contains: XE / and adump, dpdump and pfile, all three are empty (what does this mean? No DB created at all?)

  I looked at the file ORA_HOME and found initXE.ora, oradba.exe, oradim and PWDXE.ora

  I looked in the oradim.txt log:

  Kills Nov 04 11:21:17 2014

  C:\oraclexe\app\oracle\product\11.2.0\server\bin\oradim.exe-arret-SID xe - usrpwd * - immediate shutmode - log oradim.log

  Kills Nov 04 11:21:55 2014

  ORA-01012: not connected

  Kills Nov 04 11:23:01, 2014

  C:\oraclexe\app\oracle\product\11.2.0\server\bin\oradim.exe-demarrage-SID xe - usrpwd * - log oradim.log - nocheck 0

  Kills Nov 04 11:23:38 2014

  ORA-01078: failure in the treatment of system settings

  ORA-01565: error in the identification of the file "C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora".

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) Das System kann die angegebene Datei nicht find.

  -> bingo, 1st question: there is no spfileXE.ora, how can I create it? more in the dbs-file there is only an init.ora and not initXE.ora?

  Looked in the log-file files 5 from clscX.txt (probably after each systemreboot? containing the following):

  Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.

  2014-11-04 - 13:53:52.197: [5576] [default] ut_read_reg:2:ocr SOFTWARE\Oracle\olr registry key cannot be opened. error 2

  [DESTROYED] clse_get_crs_home [5576]: error recovery configuration OLR [0] [error opening of the olr registry key. The system could not find the file.

  ]

  -> SystemLanguage is German, so I translated the German parts, perhaps he was lost in the translation of sth

  -> 2nd question: is there a missing registry key?

  In addition, I looked at the ORACLE_HOME/server/config/home cloesly folder:

  cloneDBCreation:

  SQL > Create controlfile reuse database "XE" value

  2 MAXINSTANCES 8

  MAXLOGHISTORY 3 1

  MAXLOGFILES 16 4

  5 MAXLOGMEMBERS 3

  6 MAXDATAFILES 100

  DataFile 7

  8 "C:\oraclexe\app\oracle\oradata\XE\system.dbf"

  9 "C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf."

  10 "C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf."

  11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf '.

  LOGFILE 12

  13 GROUP 1 SIZE 51200K,

  14 GROUP 2 SIZE 51200K,

  15 RESETLOGS;

  SP2-0640: not connected

  SQL > exec dbms_backup_restore.zerodbid (0);

  SP2-0640: not connected

  SP2-0641: "EXECUTE" requires the connection to the server

  SQL > shutdown immediate;

  ORA-01012: not connected

  "SQL > startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora ";

  ORA-01031: insufficient privileges

  ---------------------------

  CloneRmanRestore:

  "SQL > startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora ";

  ORA-01031: insufficient privileges

  SQL > @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\rmanRestoreDatafiles.sql;

  SQL > set off echo;

  SP2-0640: not connected

  SP2-0640: not connected

  SP2-0640: not connected

  ERROR:

  ORA-01031: insufficient privileges

  SQL > spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\cloneDBCreation.log

  ---------------------------

  PostDBCreation:

  QL > Connect "SYS" / "' * ' as SYSDBA"

  ERROR:

  ORA-01031: insufficient privileges

  SQL > set echo on

  SQL > //create or replace directory DB_BACKUPS as 'C:\oraclexe\app\oracle\fast_recovery_area ';

  SP2-0103: nothing in the SQL buffer to run.

  SQL > start

  2 dbms_xdb.sethttpport('8080');

  3 dbms_xdb.setftpport('0');

  4 end;

  5.

  SP2-0640: not connected

  SQL > create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora 'FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora ';

  SP2-0640: not connected

  SQL > shutdown immediate;

  ORA-01012: not connected

  SQL > connect "SYS" / "' & & sysPassword ' as SYSDBA"

  ERROR:

  ORA-01031: insufficient privileges

  .

  .

  .

  ---------------------------

  SQL > @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmssml.sql;

  SP2-0310: cannot open the file 'C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmssml.sql '.

  SQL > @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmsclr.plb;

  SQL > DROP PUBLIC DATABASE LINK DBMS_CLRDBLINK;

  SP2-0640: not connected

  SQL > CREATE the PUBLIC DATABASE LINK DBMS_CLRDBLINK with the HELP of "ORACLR_CONNECTION_DATA";

  SP2-0640: not connected

  SQL > CREATE or REPLACE LIBRARY wrapped ORACLECLR_LIB

  2 a000000

  1 of 3

  4 abcd

  5-abcd

  6 abcd

  7 abcd

  8 abcd

  9 abcd

  10 abcd

  11-abcd

  12 abcd

  13 abcd

  14 abcd

  ABCD 15

  ABCD 16

  17 abcd

  18 abcd

  19 16

  20 51 8 d

  21 L/XXXXXXXXXX...

  XXXXXXX 22...

  23

  24.

  SP2-0640: not connected

  SQL > DROP TYPE DBMS_CLRParamTable;

  SP2-0640: not connected

  SQL > DROP TYPE DBMS_CLRType;

  SP2-0640: not connected

  SQL > CREATE or REPLACE TYPE wrapped DBMS_CLRType

  ---------------------------

  XE:

  The created instance.

  So I hope this is enough information

  Thanks in advance

  Dursin Kurt

  OK guys I found:

  Problem is the XE.bat - Script could not add me to the ORA_DBA group.

  Reason: my Computername and username, both had a mutation of the vowel 'u '.

  Why it has not worked to my laptop computer company too have both my 'U' in the username

  solved!

• Problem running Oracle PDF reports on EBS

  Hello
  
  I installed Oracle EBS 11.5.9 and database version 9 on a virtualization computer running IBM AIX 5.3
  
  If xhost + is not running on the console, reports does not.
  
  On a non virtualized machine which is the autonomic system, after starting the Oracle database and services (application), one must connect as root on the console and run the command:
  
  # xhost +.
  disabled access control, customers can connect from any host
  
  
  Now, as the machines of virtualization is not a console, as well as the telnet session, how can I use the xhost + command to activate the PDF reports?
  
  For example try to view the PDF report for active users == > SYSADMIN == > REQUESTS == > RUN == > ACTIVE USERS
  
  Then, I get this error message:
  
  ---------------------------------------------------------------------------
  Application object library: Version: 11.5.0 - development
  
  Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
  
  Module FNDSCURS: active users
  ---------------------------------------------------------------------------
  
  Current system time is 9 February 2013 23:42:09
  
  ---------------------------------------------------------------------------
  
  
  +-----------------------------
  | Starting the competitor program...
  +-----------------------------
  
  
  Current environment variable NLS_LANG is:
  American_America.AR8MSWIN1256
  
  REP-3000: internal error from Oracle Toolkit.
  REP-3000: internal error from Oracle Toolkit.
  
  Generator: Release 6.0.8.20.2 - Production on Sat Feb 9 23:42:11 2013
  
  (c) Copyright 1999 Oracle Corporation. All rights reserved.
  
  Enter the user name:
  Program exited with status 1
  Competitor Manager encountered an error when executing Oracle * report for your concurrent request 1908767.
  
  Review your output request file competitor newspaper and/or report for more information.
  
  
  ---------------------------------------------------------------------------
  
  
  Options, AutoComplete, the request for enforcement.
  
  
  End of query options AutoComplete.
  
  
  
  ---------------------------------------------------------------------------
  Simultaneous request ended
  Current system time is 9 February 2013 23:42:26
  
  ---------------------------------------------------------------------------
  
  
  
  I did a thorough search on this forum, the Metalink and articles but has not gotten a solution yet
  
  
  https://www.Google.com/search?source=IG & rlz = 1G1ASUT_ENUS489 & q=forums.Oracle.com+xhost+%2b & OQ=forums.Oracle.com+xhost+%2b & gs_l = iGoogle.3... 44957.47834.0.49558.9.4.0.5.0.0.258.848.0j2j2.4.0... 0.0... 1ac.1.ys_4zwElWYY
  
  
  
  In the problem summary:
  
  running xhost + using xmanager on a virtualized machine will not work even if you get the message when you run the command of xmanager
  # xhost +.
  disabled access control, customers can connect from any host
  
  This is useful information from where I ran the xhost +.
  
  
  # echo $DISPLAY
  TestServer:0.0
  
  Note: testserver is the windows machine I used to connect to the Oracle Machine Xmanager
  
  # lscons
  / dev/vty2
  
  Note: the above shows that it is not console - lscons on a console would show as/dev/lft0
  
  bash - $3.2 cd/oracle/prodappl
  bash - $3.2. ./APPSPROD_test1.env
  bash - $3.2 grep-i $CONTEXT_FILE to display
  < oa_var = "s_display" = "unix" osd DISPLAY > test1:0.0 < / DISPLAY >
  
  
  Anyone know the solution for this problem?

  applprod@Test1:/Oracle/prodappl > export DISPLAY = testserver:0.0
  applprod@Test1:/Oracle/prodappl >
  applprod@Test1:/Oracle/prodappl > xhost +.
  disabled access control, customers can connect from any host
  applprod@Test1:/Oracle/prodappl >
  applprod@Test1:/Oracle/prodappl > xclock &
  [1] 675940

  I tried the reports once again and the same error.

  I understand that you were able to run the command xclock, so in this case you must set the value of the variable DISPLAY (testserver:0.0) in the application context file, run AutoConfig and bounce the services again.

  Thank you
  Hussein

• Problem installing oracle 11 g 2 in a virtual machine with IP dynamic

  Hello

  I have install oracle 11 g 2 on a virtual machine in Vmware workstation with dynamic IP address.

  Then I noticed that the global database name is orcl.16.27.57, and the identifier service oracle is orcl on step 10 of window 19

  There will be a configuration manager warning and the company failed due to the following error:

  Listening is not or the database service is not registered with it.

  And even I change the name of global database for orcl, it has also failed.

  When I use the static IP, the name of the database world so SID is orcl.

  then complete the installation.

  So I don't know what the reason is, how to install it without warning during the dynamic use of IP.

  Whenever I have install oracle with static IP, I can't continue like that again.

  Help!

  Thank you

  Now, I'm happy to say it works. Two methods to solve this problem.

  1. install Microsoft Loopback adapt

  2 edit the file hosts, IP hostname

  Of course, we can run them both.

  Thank you

• Installing Oracle 11g with ASM

  Hi all
  
  I'm new with oracle 11g and I want to create a database with ASM and I can't get there.
  Could someone tell me the step to make or send a link here?
  Fact the below steps
  1 - install the software oracle only
  2. install and configure grid infrastructure
  3. create the database with asm
  
  Thanks in advance

  Salvation;

  Please check the docs below for steps

  http://www.Oracle.com/technology/products/database/ASM/index.html
  http://www.Oracle-base.com/articles/11g/AsmEnhancements_11gR1.php
  http://www.pafumi.NET/RAC11g_and_ASM_on_VMware.PDF

  Respect of
  HELIOS

• Problem installing Oracle Application R12.1.1

  During the installation of Oracle Application R12.1.1 installation I face this error,
  Windows cannot find «.\jre\NT\1.5.0\bin\java ". Make sure you typed the name correctly and then try again.
  
  Please someone idea to solve this problem

  Asad,

  Please see this thread.

  Steps for installing Oracle E-Business Suite R12 on Windows XP
  Steps for installing Oracle E-Business Suite R12 on Windows XP

  Kind regards
  Hussein

• problem installing Oracle 10 g.

  I am struggling to install oracle 10g on my windows operating system 7. I run the installer mode compatible windows xp. After the installation at the time of the creation of the database, it displays the error-
  ORA - denied 12546:TNS:permission
  and database creation will fail... I am logged on as administrator... I am really tapped, decommissioning of my XP os seems to be the only way out.i don't want to do that... If not possible, please suggest the version of oracle compatible with win7.
  Please help me...

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Install Oracle 11g R2 on RHEL 6

  Hello

  I'm trying to install Oracle 11 g R2 on RHEL6 using VM Ware workstation. I went through all the controls preinstallion and now want to create directories to hold the oracle software.

  My UNIX box has only one primary partition which is the root partition (/).

  Now the Oracle documentation on installing LInux say the following commands must be executed.

  # Pei mkdir /mount_point/app/

  # chown r oracle: oinstall /mount_point/app/

  # chmod 775 r /mount_point/app/

  For example:

  # mkdir -p /u01/app/  
  # chown -R oracle:oinstall /u01/app/ 
  # chmod -R 775 /u01/app/  

  I want to know is the following, which one should I get about this

  (a) create a new partition, make a new file system and then mount it on the directory/U01

  or

  (b) create a/U01 directory in the root (/) directory using mkdir and just go ahead with the installation without any additional partition or file system.

  Thank you.

  Hello

  as you use this machine in a virtual machine, you can simply create the folder with mkdir. The need for the mounting points on the various devices becomes relevant for productive environments due to performance reasons.

  / Florian

• Installing Oracle 11g on Oracle Linux 5.10

  Hi all

  When installing Oracle 11 g R2 in Oracle Linux 5.10 I get the error message: no such file or directory

  
  

  ---------------------------------------------------------------------------------

  [data info@localhost] $ ls

  doc installation RPM runInstaller stage www sshsetup response

  [data info@localhost] $./runinstaller.sh

  bash:. / runinstaller.sh: no such file or directory

  [data info@localhost] $

  -----------------------------------------------------------------------------

  Please suggest.

  What is the path of your runInstaller.sh? This path contains spaces? If so, to remove these spaces, and then try again.

  Also have you created (an oracle oracle owner) of the user? You must install with this user...