Problem iPhone 4

Similar Questions

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• problem iphone 6 from 26/03/2016

  where is the problem on the iPhone 6 following the 9.3 ISO update installed (pour of safari in screen and mail). It's been 4 days and nothing moves!

  Thank you for your answer

  Try turning off JavaScript under settings - Safari - advanced.

• 6 s and Mazda Bluetooth problems iPhone

  Hi all, I have an iPhone 6s on 9.2.1 and a 2016 Mazda CX5 Grand Touring with a Bose stereo system. I'm having a problem when playing audio via Bluetooth (music to iTunes, podcasts, etc.) is of poor sound quality, the sound skips to come at random, and it cuts in and out a lot. I don't see a pattern, which means that it seems not cut or jump when there are notifications or other things happening on the phone. I have a Apple Watch, so I wonder if that might have something to do with it. I took the phone to the factory settings and had even Apple replace it entirely and I've set up as a new phone, without result.

  When I connect the iPhone to the car via USB, but it's not a solution either because I don't have these audio quality problems:

  (1) it always starts playing the same song, when I start the car - the first song in alphabetical order in my music library, and

  (2) Apple vocal cards don't play - it interrupts the podcast or lowers the volume of the music, but there is no voice of Siri giving directions.

  (3) if I plug the phone immediately when I start the car, it starts playing the radio at incredibly high volume, and then I have to manually select the USB.

  None of those are questions if I am connected via Bluetooth.

  I had this exact configuration of the watch/phone even on a Honda CRV from 2013 and connected to Bluetooth without any problem all the time I've owned this car. I took the Mazda dealer twice and they say it's a matter of the iPhone. Anyone have any ideas on what is happening and how I can fix this problem?

  Plugin problems you describe are a vehicle problem, and how the audio system controls the phone.

  The problem with Bluetooth, you said it worked in another vehicle. I understand that Mazda said it was a problem of the iPhone, but most audio problems have to do with the software in the audio system not done to support the version of Bluetooth on the phone. I take back the vehicle to the Mazda and ask if there is a software update to their audio system. You can also look around to see if they had complaints from other users in your area with this vehicle. You can also try to contact Mazda customer service and ask this question.

• iOS 9.2.1 wifi problems (iPhone 5)

  Hello world

  still using my iPhone 5 as my main but lately known problems of major wifi phone: she just will not connect to my wifi unless I force to (the wifi menu to minutes until he shoes he has connected to wifi). When it shows then it is allegedly connected to the wifi I don't get any 'real' connection - the phone charge not any whatapps, web pages, etc... So I have to stay in my mobile network to be online. It is so incredibly annoying since - let's be honest - without an internet connection, the phone is almost useless! Phone works in other wifi. I first noticed this problem (a few days) after the update to 9.2.1.
  Another iPhone (4S and 6 - even 2G) works fine in my wifi iPad and the MacBook!

  I've read several discussions about this sh * TTY number and do not operate again. Is it possible that is has something to do with the iOS 9.2.1? All other mobile devices iOS in my household are not running this version and work correctly...

  Things I tried and it does not work:

  -reset the router (However it obviously was not the source of this issue since other devices worked properly)

  -set the new DNS ("8.8.8.8" - read than some part... bullsh * t!)

  -reset the network configuration

  -power off iClould

  "Have you tried turning and turn it on again? Yes, I have! Thank you Apple!

  -soft reset

  -hard reset (return to factory settings)

  Still does not connect. As Im writing this post I think more than its due to some sh * programming iOS 9.2.1 ATS... If this is the case, I consider that it is incredible that Apple does not allow to go down to another version of the iOS (as if it were possible, that's what I would do before I put my phone back to the factory settings)!

  So I hope that there is someone out there who may have experienced the same problem and can fix it somehow

  Update: the iPhone connects to my wifi 5 first Minutes I turn on wifi phone. After 5 minutes, it will not be any connection to the internet that it shows that I have a strong wifi connection... When I pass it still works on my phone it again will run for 5 minutes...

  iPhone works fine with wifi systems and it worked with mine for 2 years now until a few days after the software update

• Update ios 9.2 problems iPhone 5s

  Hey guys!

  I have an iphone 5s, no jailbreak or something, and I've recently updated to ios 9.2.

  The update took more than 40 minutes and the phone reformulated several times, sometimes the screen turned blue. Although the update succeeded these problems when I try to start my phone, and I have to wait a very long time...

  My phone freezes frequently while I use it, sometimes 5 minutes or more...

  Anyone what is happening? How to solve these problems? Waiting for response from you guys!

  Hello Ptsts,

  Thank you for using communities Support from Apple!

  I understand that your iPhone was not updated in the mansion you should and are now running slow or become unresponsive of all together in a sporadic way. To resolve this situation, I recommend you to reinstall the operating system of iPhone.

  Completing this process will not affect any of your data, but I always suggest making sure that you have a current backup of your iPhone in iTunes or iCloud.

  How to back up your device using iCloud or iTunes - Apple Support

  Once your iPhone is saved, please follow the steps in the next section to reinstall the iOS on your iPhone.

  1. Connect your device to a computer and open iTunes. If you don't have a computer, you can borrow one, or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force it to restart. Press and hold buttons sleep/wake and Home at the same time. Don't release when you see the Apple logo. Keep now until you see the Recovery mode screen.
     
  3. When you have the ability to restore or update, choose update. iTunes will try to reinstall iOS without erasing your data.
     

  iTunes will download the software for your device. If it takes more than 15 minutes, your device will exit Recovery mode and you need to repeat steps 2 and 3.

  If your iPhone, iPad or iPod touch does not respond or won't turn on - Apple Support

  See you soon!

• Problem iphone photo sending

  I am running windows 2003. When I connect my iphone via the apple USB cable it connects and I see the iphone in my computer, but the camera wizard shows I have no pictures and is grayed out THEN so I am not invited to download. I have lots of pictures on the camera. Please indicate how to access and download the photos on my laptop?

  Hi retirementcomingsoon,

  If you still encounter a problem downloading your photos on your Windows 2003-based computer, post your question in the Forums of Windows Server.

• Using 3500 as a Wireless Extender DHCP problem iPhone X 6

  Hello

  If all goes well, a simple question with a simple answer.

  Background:
  I stayed away from my DSL provider to a cable provider (VirginMedia). My new ISP is delivered with a modem cable (SuperHub 2 ac) and I connected the two devices together to extend my wireless home network. The cable modem, it's that the two routers are physically apart from others - connected through just their Ethernet ports - the technology of power line (Devolo dLAN 1200 +). Both routers have the same SSID broadcast, but on separate channels.

  Question:
  All devices in my house, the tablets of laptops, phones roam between the two areas wi - fi transparently * except * the iPhone 6 (iOS8.1), this works on the cable modem wi - fi, but not on the X 3500 wireless. I also have an iPad Mini 2 (also iOS8.1) which works too - aptly / wrong I have excluded iO8.1 as the issue. Oddly enough, the iPhone 6 connects to the x 3500 but isn't getting an IP address (the cable modem's DHCP server). Even if a static IP address doesn't help.

  Comments:
  If the X 3500 is configured as a DHCP server, the iPhoen connects (and gets an IP address), but then the default gateway is incorrect (gateway IP address of the X 3500 is not the modem cable remote). I can't find anywhere to specify a default gateway configuration.

  Question
  I start thinking, it is a problem with the iPhone 6 (know all other devices work correctly), but I want to just make sure I am the X 3500 configuration correctly. I am particularly interested in it if I use the right to 'Mode' ADSL / Ethernet. I tried 'Bridged Mode Only' (ADSL) and "Automatic DHCP only" (Ethernet), but does not seem to solve the problem of having the iPhone 6.

  any suggestions on how to fix / help would be most welcomed.

  Thank you!

  Thanks a lot for the details... Now I have a config that works also for the iPhone6.

  Basically, I connected the cable on the 3500 x port and the Ethernet port on the cable modem connected to the internet (via the Powerline). I then changed the network on the 3500 of 192.168.0.x x range (this is the range of network addresses used by the cable modem connected to the internet) to 192.168.168.x. Finally I activated the DHCP on the x 3500 which seemed to be the element that was killing the iPhone6.

  The iPhone6 connects now (which he always did), but with DHCP running on the x 3500 on the new range of network addresses of the iPhone 6 also get a valid IP address.

  Looks like that much just to get the iPhone 6 to work... never found a manual way to specify a default on the x 3500 gateway when you run DHCP (appears by default which is her own IP address - with no provision to change).

  Anyway... This works for now... I'll keep an eye on the iPhoen updates 6, just in case where the anomaly is something specific to the iPhone 6, if something changes I will post here.

  I have attached a picture for furture reference. Thanks again for your advice and support.

  

• Muse problems iphone/android

  I'm working on a website in muse and I have a problem with different devices.

  my website looks good on the iphone 6:

  

  but when I look on an iphone 5 or on a new android device, then the right side is cut:

  

  on both devices, android and iphone 5, it is possible to manually zoom in a bit and then the site is showed correctly.

  is this normal, you have to scale the site by hand, are not scaling sites automatically these smartphone browsers?

  Here's my .muse file

  Web site - tiefschwarz.muse.zip - Google Drive

  I really need some help here!

  Thank you to all the answers

  I finally found the solution

  I put breakpoints fixed-width, but I didn't know that I have all of them to be designed for the next smallest breakpoint. its areas shown by the smaller page margins that appear when you set a breakpoint for fixed with.

  for everyone who has this problem, read this:

  combining the page fixed and fluid width in a site

• Image problem iPhone launch base 6 +.

  I can't performance good launch-image on iPhone 6 + iOS 8.3, using AIR v 17 and publishing with Flash Pro CS5.5

  I tested what I understand to launch-correct image dimensions and names: 1242 x 2208 and '[email protected] '.

  I also tested:

  'Default-414w-736h@3x~iphone.png '.

  '[email protected] '.

  I have create a stage of 1080 x 1920, add the launch image and get:

  

  Letter-boxing is provided by the iPhone! I drew lines of test on my stage, which was shortened in the longitudinal direction, courtesy of iOS 8.3

  I read that people had problems as this number of months, but they have been resolved in the last release in the ATMOSPHERE. So it must be me. What I am doing wrong?

  And as a follow-up question, is it possible to add launch-image information to the application descriptor .xml that will be picked up in the info.plist file APP?

  OK, answered my own question (sometimes you just have to ask in order to find the answer!):

  Non-compliant mode of Adobe in Guide for presentations of the Apple App Store | Adobe Developer Connection ("throw the images are included in the root directory of the application package but are not referenced in the publication settings or application descriptor"), the launch of images for at least iOS 8, MUST BE referenced in the application descriptor in order to enter the app bundle's info.plist.

  Unlike previous versions of iOS, the launch image seems to have be referenced in the info.plist file.

  If I'm missing something here please provide info, corrections.

  Thank you, CU.

• TWO FACTORS of AUTHENTICATION WHICH of the problems Iphone 3

  TWO-FACTOR AUTHENTICATION works with Iphone 3 (IOS6)? Given that I've implemented security two new factor, that I was not been able to use my phone E-mail nor icloud

  Of the article you attached at the top:

  

  In addition, the 3G iPhone cannot run any iOS past iOS 4.2.  So either you do not have an iPhone 3G or it does not run iOS 6.

• WRT400N has continued problems iPhone

  Hi all -

  I'm generally pretty well understand these things, but I can't for the life of figure me out how to get the connection from my iPhone to stop the fall of my WRT400N.   I've updated firmware, done reset hard reset the network settings on the iPhone, changed the security settings to TKIP, changed their return, even got rid of security, given the iPhone a static ip address, changed the dns to the 208.x.x.x dns settings, etc..

  My connection has always goes down and request password over and over again - he pushes me nutso.   Previous wireless netgear router worked perfectly fine.   Two PC and a Blu - Ray to Samsung player to connect and stay connected perfectly.   Help please!

  Which band you use to connect to the IPhone...?

  Try to use the 2.4 Ghz and make the following settings on the router... On the router configuration page, under Wireless tab... Set the Radio band to wide - 40 MHz and change the broad Channel 9 and channel Standard 11 - 2, 462 GHz... Under wireless settings advanced... Change the interval of tag to 75, Fragmentation threshold to 2304, RTS threshold to 2307 and click on save settings... Now, check.

• problem iPhone app preview.

  Hello

  When I saw an iPhone in Flash app (file |) Publish preview | Flash), it opens in a tiny window as shown on the screenshot. Suggestions how to window open at 320 x 480?

  

  Thank you.

  I had not thought to do a test in this way. He seems to use ADL, but does not know about the devices. Try to do a Test Movie (Control/Test/Test Movie). What does an overview of the application, but there is also a menu of the device. It is perhaps enough difference to make it work better.

• iPhone over Verizon's LTE 7 / coward calls problems

  I've recently upgraded from Android and buy my first iPhone. I like the phone, but it seems that the connection of data/LTE is horrible on the phone. I am constantly finding my phone is stuck on the 1 x or 3G connection and not being able to catch LTE in places I know are a LTE connection. In addition, sometimes my iPhone will drop calls. When I am I'm in my apartment, so I turned on wifi my component wifi works well, but other places, it deletes the call. Not sure if this is related to the issue of LTE connection. Does anyone else have this problem on Verizon?

  I'm in my Exchange/return policy so I don't know what I have to do.

  Have exactly the same problem: iPhone 7 more 256 GB Black Verizon. Pre-order the phone got on 21 September and after a few days without service drops to 3G and stays there until the toggle airplane mode or reset network. Went to Verizon 23 got a new SIM card and after a few hours, the problem came back. Next day went to Apple told them the problem they did exchange of unit that had to be ordered because he had no stock and 27, I got the replacement phone first day that it was quite good, but the second day, all the problems are back this time the phone has a whistle as well... so on September 30 , brought the phone to apple as well as the box and they said they can get a me another replacement and I refused it not knowing not if its released State and requested a refund, but Engineering did not repay because the serial number is different from the box. Fortunately, I chatted with Apple the previous day and received the email and talked to the Manager and eventually returned the device.

  Back to my iPhone 6s now and no problems with the service even with VoLTE on. Don't miss the iPhone 7 more size and stereo speakers, but I'll wait until all the bugs and hardware issues are fixed before ordering again!

  I had an iPhone 5, 5s, 6: 6 without any problems until one. I returned mine because they gave me a replacement not retail box with the same question. I want to keep the phone but has returned to be sure whether a hardware problem is present they will fix it on the line, so I'm going to order a new one.

• problem with the version of the iphone apple id 9.3 5s

  I have the iPhone 5s and updated a new version for the iPhone , the 9.3 version 

  After the update , the iPhone has asked me to write the apple id mine and I wrote the apple id true, then the iPhone said that can be used in apple id that unlock the iPhone that, I tried all the options and luckily I read on the internet that I'm not the only one with this problem iPhone 5s and thousands users with this problem , I've been 6 days without a phone , what to do ? I read that connect the device to iTunes and iTunes alone offers you upgrade to the new Athgirsh of 9.3 but when I plugged the device it did not offer me any version only ran once again the apple of my id

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3