Problem of 2007FP, Windows 10 USB ports,

Similar Questions

• Bluetooth Windows 7 USB port problem

  Hello

  I use a bluetooth class 1 dongle (manufacturer unknown) with the V 8.00.03 Premium toshiba bluetooth stack and a bluetooth headset. The specifications for the dongle are: Bluetooth V1.2, compatible USB V1.2/2.0

  I have a strange problem when changing the USB dongle is plugged. If I change the dongle on another USB port, searching for devices fails. I tried to uninstall the battery and of course remove device from the bluetooth Manager window.

  Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I want to change the USB port so that I can get the best reception, like its plugged in to the back at the moment. Also, I want to use the usb expansion for the same reason, to bring out above the office. Oddly, if, as I say, it does not work with the extension (just a regular cable with USB male on one end and female on the other to plug the dongle in.)

  Is this something to do with voltage drop down a cable? And regarding the change of the ports usb is it something to do with ports being installed on this USB port bluetooth only? I don't know exactly how ports bluetooth works, how they settle etc.

  Thanks much for any help.

  Hello

  > Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I think you're wrong here buddy
  If you use another manufacturer's computer, and if you have problems using it, you should check the page of computer manufacturing support.

  In my opinion the question isn t linked to Toshiba BT stack but to the USB ports on your computer.

• Tecra M11-134 - Windows 7 USB ports problems

  I have three USB ports, that which is a SATA port.

  SATA port stopped working earlier, but I reinstalled it, after what it worked again.

  One of the USB ports however stopped working earlier, and am now unsure as to if this particular port doesn't show even in Device Manager (I see two entries "Generic USB Hubs", two "USB host controllers", a "USB unit (composed)" and two "USB root hubs"), but who is refers to the regular USB ports and that the SATA port?

  One of these entries in the USB port which does not or does not show this port?

  In any case, I can't get one of the ports to work even after reinstalling all USB ports.
  Can anyone help?

  I hope that someone with the same machine will describe the own experience with this, but what I want to know is follow:
  Have you tried to reinstall original Win7 32-bit professional and test functionality with the factory settings?
  >... even after reinstalling all USB ports
  Out of curiosity, but how you did it? Have you reinstalled the chipset driver?

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• Before TC M700 and Windows 10 USB ports

  I have a TC M700 and can't seem to find the drivers for the USB 3.0 front ports on the chassis of the tower. I installed all the drivers for chipset, that I could find. There, someone had this problem?

  Run Windows 10 Enterprise 64-bit

  Thank you!

  Thank you for your response and suggestions.

  I opened the case and concluded that the cable connecting the front ports was not connected. It came out during the transport or has never been connected to the factory. I reconnected it the cable and everything works!

• Calls to Windows 7 usb port D: at first then 1 disk either

  Dear Sirs: just a 16 GB USB key started being called D: drive which is my DVD drive, now it is called disk 1. When I got to change the paths and the drive letter is D, but I was too scared to change. Now, it is called disk 1 and I am not allowed to change the drive letter and path because my console view is obsolete but refreshment and reboot do not allow me to continue. It is visible as a 16 GB under Device Manager device. I have no exclamation mark under USB controllers and have unplugged and restarted according to the recommendations. My convenience store said something like new installed hardware detection issues. I don't know how to assign drive letters if that's what needs to be done. It's Windows 7 Home premium.
  Thank you. Once again the simple fixes seem to have no effect.

  Hi PeterStaub,

  Thanks for posting your query in Microsoft Community!

  I understand that 16 GB flash drive is detected as disk 1 and you must rename the drive.

  Answer the questions below.

  (1) don't you make changes to the computer?

  (2) don't you try to connect to the other computer?

  (3) that you get an error message by renaming?

  Please click on the link given below for more information about this

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

  I hope that aid of information! If you need assistance, please feel free to post. We will be happy to help.

• USB ports no longer work after windows 10

  Hello

  Tried to solve the problem I have with my usb ports not recognizing not not the mobile hard drive trying to help pre Windows 10 answers but no luck.

  Please could someone advise or help me reinstall my usb drivers? for my system, now I win 10. Thank you

  Steve

  Hello

  Thank you for your help...

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• HP 15-AC007NIA: USB Ports not working not not on HP 15 AC007NIA

  I have a laptop HP 15 - AC007NIA provided with Free-Dos. I installed Windows 7 64-Bit OS on it, but I have serious driver problems.

  The 3 USB Ports are not working and the wireless is also working well. It shows a single bar before the Access Point.

  Does anyone have a solution for this? Suggestions would be appreciated.

  Thank you

  Hello:

  You need this driver for USB3 ports... Accept the contract, download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/24896/USB-3-0-Intel-USB-3-0-driver-for-Intel-NUC

  What model of wireless card your laptop there and what is the driver version and date?

• USB ports do not recognize hardware

  I have a desktop running Windows XP and a few months ago he suddenly stopped to recognize the external hardware on 2 of the 4 USB ports.  The two other USB ports work.  Is this a software problem or could the two USB port went bad at the same time?  I plugged a USB stick in the USB work and it does not work, but the mouse I reconnect works very well.  This same USB works on another system.  I'm puzzled.

  Thanks for your help!

  I have a desktop running Windows XP and a few months ago he suddenly stopped to recognize the external hardware on 2 of the 4 USB ports.  The two other USB ports work.  Is this a software problem or could the two USB port went bad at the same time?  I plugged a USB stick in the USB work and it does not work, but the mouse I reconnect works very well.  This same USB works on another system.  I'm puzzled.

  Thanks for your help!

  If some ports work and others do not, it is most likely a hardware problem, not a Windows.

• N5902 Input Device works not when the Dongle is attached directly to the USB Port of the 3.0

  It's a big problem because the port only 2.0 on my Lenovo Yoga 700 is also used for charging and unless I'm on battery so I have to fix the dongle because otherwise the USB device is not recognized and I can't use my N5902 input device. Someone has an idea, a driver so I can install it manually? I use Windows 10.

  I managed to find a solution, I applied "Solution 2" of https://www.drivereasy.com/knowledge/fix-issue-after-upgrade-system-to-windows-10-usb-ports-don ' t - wor...

• device works on some usb ports

  My iPad has stopped working on the USB port in the front on my PC. It keeps connecting and disconnecting.

  It works fine when connected to a USB port on the back of the PC.

  In windows, each USB port has its own driver.  This is why you see the message "installing device drivers" in the notification area when the device is plugges on a unused usb port...

  How can I remove the driver for the iPad that is associated with tha front port so that the iPad is recognized properly by Windows?

  Thank you.

  Frédéric

  The problem could be that the bus from the front port has other pulling just enough power for
  make a difference or other hardware issues.

  If it is not material, these steps can help.

  ------------------

  
  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• USB PORT not responding

  Microsoft Surface RT

  My mouse USB port no longer responds to my Flash DRIVE and other USB - this is insensitive. All seems normal in Device Manager and I have tried to uninstall and restart as suggested on some forums who has had no effect. I tried to restore the computer, but I need to make room for 5 GB and without being able to offload stuff for my USB which is practically impossible without wiping everything on my shelf Please HELP!

  Hello

  Thanks for posting your query on the Microsoft Community.

  I understand that the USB port doesn't work on your computer. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. There might be a chance that the USB port is corrupted or damaged.

  First of all, I suggest you to check the issue in different ports. If the problem persists, I suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Device Manager by pressing the Windows key + X and select Device Manager from the list. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  Disable USB selective suspend framework. This method prevents your power off USB device.

  1. Press Windows key + Q, type of power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  In addition to this I suggest update you also the USB drivers from the link provided below and see if that helps update you the drivers or not.

  Download and install the drivers

  Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

  Kind regards

• USB ports all failure Tecra S1

  Hello

  my old Tecra S1 video card died last week and I managed to find an another identical Tecra S1 very cheap.
  I swapped my portable hard drive in the new computer and everything works fine apart from any of the USB ports work.
  Food sent to external drives USB but my computer does not recognize one of the 3 USB ports at all.

  I tried to remove / replace the drivers but no change.
  Also as I had my same old laptop for spare parts I have even replaced the USB turntable (as one of the original USB ports has been damaged) but still no change.

  Could this be something to do with the version of the BIOS on the laptop as surely everything else should be already on my hard drive?
  Maybe my old laptop had an older BIOS which might make a difference?

  any help would be gratefully receieved as I looked the net but don't have anywhere!

  Thank you very much
  Ian

  Hello

  First of all, you aren't sure if the USB port hardware is ok for this second Tecra S1. Right?
  So, theoretically, it might be a hardware and software problem.

  Generally, the USB ports are controlled by the chipset driver.
  You replaced the HARD disk where the operating system is already installed
  I think you should try to install the operating system once more on this second Tecra S1.
  Then you should check the Device Manager if all the USB ports have been recognized correctly.

  If the USB ports would be NOT visible in Device Manager, then I would tend to a hardware problem

• Cracked screen and faulty USB ports on Satellite A105-S1014

  On my Satellite A105-S1014 screen is cracked and needs to be replaced. How much cost could replace the screen?

  In addition, my phone and USB ports do not work properly. This problem arise well before that I accidentally cracked the screen. Some times when I turn first of all the computer, USB port and telephone ports work for awhile and then after a period of time ranging from a few minutes to several hours, they badly run simultaneously and the computer says that what is in the USB port does not work and that there is no dial tone in the phone port that I use to access dial-up. At the beginning, I don't have this problem with the Toshiba laptop, but it arises after about three months.

  My warranty has expired. How much it could cost to solve the problem of the phone and USB ports?

  Hey Buddy,
  I can't tell you how much would it cost to fix these two things, but I can tell you that you buy rather a new machine because the display and motherboard are the most expensive parts in your machine. Since your ports USB and your RJ11 (phone port) don't work anymore and this stuff is on the motherboard, I guess you have to swap the motherboard, too.

  I suggest you to sell your machine @ ebay and buy another. It would be too expensive to fix your machine. Believe me, I had a case of simiar and parts cost more then buy a new machine that was more recent and better performance.

  Just my opinion and just a thought for you... :)

  Welcome them