Before TC M700 and Windows 10 USB ports

Similar Questions

• Portege M700 and Windows 7

  Hi all

  I installed Windows 7 RC on my Portege M700, and everything was fine, except:

  -Intel(r) Management Engine Interface (show on the device as a PCI Simple Communications controller Manager);
  -Novatel Mobilink to the Novatel Wireless Broadband (3G HSDPA) SM-Bus minicards Modem integrated (EU870D) (list on the device as 4 Interfaces of data manager).

  I used the drivers on Windows 7
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1927814& rpn = PPM70U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768662 and all fine wenf.

  I even managed to get the drivers for the Modem from Novatel minimap from a previous version and accepted Device Manager.
  But when I try to install the v2.02.27 from Novatel MobiLink available [here: http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=2 & selFamily = 4 & selSeries = 157 & selProduct = 773 & selShort Mod = 684 & language = 13 & selOS = 26 & selType = all & yearuploa d = & monthupload = & dayupload = & useDate = null & mode = Chinas allMa & search = & action = search & macId = & country = 8 & page = 2 & startPage = 1] he justs roles back the instalation before it's over.

  Do you know if toshiba plans to deliver a version of Mobilink from Novatel compatible with Windows 7?
  And what of the Intel(r) Management Engine Interface? There will also be a compatible version?

  Thanks in advance guys...

  Hello

  > I even managed to get the drivers for the Modem from Novatel minimap from a previous version and accepted Device Manager. But when I try to install the v2.02.27 from Novatel MobiLink available only here it justs roles back the instalation before it's over.

  The point is that you tried to install the driver on Win 7 OS Vista and this could be the problem. Seems the Vista driver is not supported with Win 7.
  Of course, some drivers Vista would go with Win 7 but not all drivers are compatible.

  I think you have to wait until the drivers Win 7 for the 3G module would appear.

• Bluetooth Windows 7 USB port problem

  Hello

  I use a bluetooth class 1 dongle (manufacturer unknown) with the V 8.00.03 Premium toshiba bluetooth stack and a bluetooth headset. The specifications for the dongle are: Bluetooth V1.2, compatible USB V1.2/2.0

  I have a strange problem when changing the USB dongle is plugged. If I change the dongle on another USB port, searching for devices fails. I tried to uninstall the battery and of course remove device from the bluetooth Manager window.

  Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I want to change the USB port so that I can get the best reception, like its plugged in to the back at the moment. Also, I want to use the usb expansion for the same reason, to bring out above the office. Oddly, if, as I say, it does not work with the extension (just a regular cable with USB male on one end and female on the other to plug the dongle in.)

  Is this something to do with voltage drop down a cable? And regarding the change of the ports usb is it something to do with ports being installed on this USB port bluetooth only? I don't know exactly how ports bluetooth works, how they settle etc.

  Thanks much for any help.

  Hello

  > Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I think you're wrong here buddy
  If you use another manufacturer's computer, and if you have problems using it, you should check the page of computer manufacturing support.

  In my opinion the question isn t linked to Toshiba BT stack but to the USB ports on your computer.

• Problem of 2007FP, Windows 10 USB ports,

  I have a Dell 2007fp monitor connected to an HP Pavilion Elite HPE Office 10 64-bit windows running. Recently I decided to start using the USB connections on the monitor, so I bought the USB upstream cable and plugged. When I do that, I get a message that says: USB device not recognized. If I check the Device Manager, I get an error message 43. I tried to uninstall the drivers for this port and resettlement. Turned the monitor off tension and back, restarted the computer, nothing seems to work. If I plug my phone into the USB monitors I will load but no other service. If I plug the phone directly into the computers USB I get full access. Suggestions of Ant on how to get the monitors USB ports working entirely?

  Because the old 2007FP of 10 years does not have a Windows 10 INF driver for Windows 10 to recognize, the USB hub in the 2007FP are 'invisible' correctly Windows 10. There is not a fix for this. The 2007FP 10 years, has been validated only in Windows 2000/XP.

• Tecra M11-134 - Windows 7 USB ports problems

  I have three USB ports, that which is a SATA port.

  SATA port stopped working earlier, but I reinstalled it, after what it worked again.

  One of the USB ports however stopped working earlier, and am now unsure as to if this particular port doesn't show even in Device Manager (I see two entries "Generic USB Hubs", two "USB host controllers", a "USB unit (composed)" and two "USB root hubs"), but who is refers to the regular USB ports and that the SATA port?

  One of these entries in the USB port which does not or does not show this port?

  In any case, I can't get one of the ports to work even after reinstalling all USB ports.
  Can anyone help?

  I hope that someone with the same machine will describe the own experience with this, but what I want to know is follow:
  Have you tried to reinstall original Win7 32-bit professional and test functionality with the factory settings?
  >... even after reinstalling all USB ports
  Out of curiosity, but how you did it? Have you reinstalled the chipset driver?

• I have aspire computer desktop M3920 and all my USB ports at the front do not work any more :(HELP

  OK, so all the USB ports worked very well, but a yellow exclamation appeared recently on ( ) Intel (r) 6 Series/C200 Series Chipset Family controller USB - 1 26 improved host) in the Device Manager, and my PC has no pop up any USB device I plug, so I uninstalled to reinstall it to try to solve the problem. but now I'm stuck and couldn't get them to work again

  Any help or info would be appreciated.

  I could try to reinstall the driver from the Chipset for the M3920 see if that helps. Link to the driver

  After that it gets a little tricky and I must recommend that you backup your data and do a recovery.

  Thank you
  Cory

• Windows Vista before complete Edition and Windows 7 Ultimate is now creating a new office & this message "the location is not available.

  Dear Sir/Madam

  When I turned off my laptop and the switch once more, a problem occurs usually suddenly and my operating system "Vista Ultimate" done before and Windows 7 now do the same thing as well time and time again.

  The problem is often occurred when I start my PC which is the operating system attempts to create a new different OFFICE that is completely different to my usual DESKTOP with this message:

  (The location is not available)

  "C:\Windows\system32\config\systemprofile\Desktop refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure the office is inserted correctly, or that you are connected to the internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »

  I did format three times and reinstalled my OS Vista and 7 and the problem still occurs. But sometimes, and after passing it off several times the problem disappears. But when my work of operating system there is no problem at all. That's my problem.

  Thanks in advance

  Elsharif

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Above is the link for the Windows 7 Forums.

  They will answer your questions of Win 7.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Error "Windows cannot load device driver code 31" with LAN Realtech and Pantech UM175 USB port

  Just built a new system Windows 7 deluxe two weeks ago. I loaded windows perfectly on 5 May. I also did an update of the material disk driver and everything worked very well. Automatic security updates took place a week later on 12/05/10 and my port LAN RTL8111DL Realtech and my USB broadband UM175 Pantech model stopped working. Both say that the driver is not installed or working. I tried to reinstall both several times without success. Institutionalized, Device Manager will say invalid parameters. I can usually fix this sort of thing, but I can't get any Internet connection device to work well enough to connect to analysis or updates. I downloaded the latest drivers on another computer and tried in vain. Whenever I try to reinstall it, the device gets a higher number. I'm up to #5 behind the name of the controller LAN Realtech. I'm out of ideas. Can help you.

  Thank you in advance!

  (Windows 7 Ultimate 64 bit, Biostar TH55B HD, I5-650 processor, 4 GB of OCZ Memory)

  PCI\VEN_10EC & DEV_8168 & SUBSYS_23091565 & REV_03
  PCI\VEN_10EC & DEV_8168 & SUBSYS_23091565
  PCI\VEN_10EC & DEV_8168 & CC_020000
  PCI\VEN_10EC & DEV_8168 & CC_0200

  I tried everything to correct even install an upgrade. (He failed due to corrupt files) I was forced to do a total fresh install after format. It worked fine and all the drivers installed well again! I am convinced that among the caused MS updates the driver stack corruption. I spent a lot of time to reinstall everything for this problem. I disabled all of the updates and won't do any of them up to a have a full backup of the road before accepting the MS updates!

  Thank you

• Downgraded back to 8.1 for Windows and now my USB port has disappeared!

  I recently did the upgrade of Windows 10, hated and he was causing problems with closing spontaneously, etc..  I went back to 8.1 for Windows and now my D: / drive is missing.  It charges my phone in order to him exists, but it does not appear in my menu in the Manager of devices or disk management.  I really want to do a system restore unless it's my only option.

  I have the model E5-511.

  I hope someone can help

  a system restore will work.

• Windows XP and Windows 7 usb detection problem

  Hello

  We have a restriction USB deployed in our society. Broadband all sticks / modem are working well before politics. But after the policy is enabled.

  broadband software works on Windows 7 but not on the Windows XP computer. The device is correctly recognize on a Windows 7 machine, but not XP.

  Can anyone tell how we can solve the problem on windows XP? Why Windows 7 can do work to stick to broad band, but not on a XP machine what restriction policy USB is applied?

  Thank you

  Romardy

  Hi RomardyBarja,

  Thanks for posting your query in Microsoft Community.

  From your problem description, I understand that your Xp computer is connected to a computer in the domain where the domain policies are applied.

  The question you posted corresponds to the domain policies and would be better suited to the Technet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Novatel HSDPA Modem for protégé M700 and Windows 7 RC

  Hi all
  After a lot of research on the web, I'm stuck.
  I found the current Mobilink (v2_02_37) software that installs successfully and the new Toshiba (1.1.7) Utils.

  Now I'm looking a Novatel driver or the real 3G modem. One of Toshiba (ToshibaDriver_V2.01.12) does not install. It restores at the end of the installation.

  In Device Manager, I find 4 unknown devices 'data interface' with the missing pilot.

  The Toshiba utility can't find 3G modem, when I try to turn it on using FN + F8.

  Where can I get an installable version of the Novatel software?

  Thank you so much suspicion, except this problem Win7 RC works perfectly on the M700.

  Toshiba support replied that Win7 is not supported :-(

  As far as I know that Windows 7 is not on the market and what you can use is test version only. Toshiba and other laptop manufacturer will start Windows 7 support when Microsoft it offers on the market and when Toshiba starts to offer equipped laptops to Windows 7.

  Until then, you can just play a bit and test the basic without specific stuff from Toshiba features.
  I do the same.

  Sorry, buddy, but we have to wait for the official global launch of Windows 7.

• Calls to Windows 7 usb port D: at first then 1 disk either

  Dear Sirs: just a 16 GB USB key started being called D: drive which is my DVD drive, now it is called disk 1. When I got to change the paths and the drive letter is D, but I was too scared to change. Now, it is called disk 1 and I am not allowed to change the drive letter and path because my console view is obsolete but refreshment and reboot do not allow me to continue. It is visible as a 16 GB under Device Manager device. I have no exclamation mark under USB controllers and have unplugged and restarted according to the recommendations. My convenience store said something like new installed hardware detection issues. I don't know how to assign drive letters if that's what needs to be done. It's Windows 7 Home premium.
  Thank you. Once again the simple fixes seem to have no effect.

  Hi PeterStaub,

  Thanks for posting your query in Microsoft Community!

  I understand that 16 GB flash drive is detected as disk 1 and you must rename the drive.

  Answer the questions below.

  (1) don't you make changes to the computer?

  (2) don't you try to connect to the other computer?

  (3) that you get an error message by renaming?

  Please click on the link given below for more information about this

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

  I hope that aid of information! If you need assistance, please feel free to post. We will be happy to help.

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Network adapter/USB Port on Windows 7 problems

  So basically, I moved to another House and after do not use my PC for a while something happened my usb port, either my adapter or Windows.

  My computer at the front has 2 ports, usb 3.0 port and a normal USB port that does not for a long time now (broken). At the rear, I 2 s 3.0 and 4 more normal. On my iPad, internet is fast, 35 Mbps download and upload 13. On my PC, once I log on the 3.0 in the front port, nothing happens. Windows can not find anything, do not help convenience stores. I have always used this port before, and the connection was great, although now he doesn't seem to see anything. At the rear, the normal USB ports give me a 0, 50-1, 00 Mbps download and upload, the 3.0 s give me like speed of 2, 50 - 4.00. It worked really better before on the front port, I tried the system restore... That's happened? All the patches? I need really better internet for my PC.

  Roju salvation,

  Please contact Microsoft Community. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. What is the number of brand and model of the computer?

  2 do you meet any question when you connect other USB devices in the front port?

  3. What are all the troubleshooters that you tried?

  4. do you receive any error messages?

  This problem might have occurred because of these reasons:

  1. corrupted driver.

  2. hardware issue.

  Try the steps listed here:

  Method 1:
  I suggest you to download and install the driver network and chipset on the computer manufacturer website and check if it helps.

  Method 2:
  If the problem persists, I suggest to uninstall and reinstall the Device Manager USB controllers and check to see if it helps.

  (a) press on the Windows key + R, type devmgmt.msc.

  (b) expand USB controllers, click drivers.

  (c) click on Properties, click on the Uninstall tab.

  (d) click OK.

  Note: restart the computer and it will update automatically pilots.

  Check out the link for more information.

  Tips for solving problems with USB devices (applies to Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• USB ports stop working after windows 7 updates (April 12, 2011)

  After application of the 12 updates successfully (KB890830, KB2508272, KB2506223, KB250212, KB2508429, KB2507618, KB2509553, KB2503658, KB2506014, KB2491683, KB2511455 and KB2446710), my USB ports stopped working after restart. I get this description of Device Manager: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I restored the functionality of USB ports by doing a system restore before installing updates.

  What should I do? Ignore ALL updates future windows 7, which leaves the system vulnerable? Help is appreciated thanks.

  I solved this.

  Device-USB controllers-online standard uninstall online Manager pci improved to (do it twice) usb host controller, and then the scanner hardware change and let the win7 to reinstall the drivers.
  Updates were corrupted somehow the drivers, you need to fix manually.