device works on some usb ports

Similar Questions

• Satellite A200 - 26 d - error code 19 Device Manager on the USB ports

  I decided to try Windows 7, but the usb ports do not work in Device Manager all the usb root hubs have a yellow triangle and the State of the device says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  I tried to uninstall via the Device Manager and restart the computer and download and reinstall the drivers for vista, because I can't seem to find the drivers for Windows 7, but none of this fixed anything. I was wondering if there was something else I could try or if I could get a link for the correct drivers.

  Hey JP317!

  If it didn t work removing the USB ports in Device Manager and restart the laptop, you should try to update the chipset drivers because they are usually a part of it.

  So check the site Web of Intel for an update and you should also find Windows 7 drivers.

  If you have any other questions, please let us know!

• Camcorder JVC Windows says vista and XP ' device unrecognized try another usb port if it doesn't have a replacement device.

  Model of camcorder JVC GZ-MG50AA

  computors on XP sp3 and Vista laptop. Both give the same message when the camera connected to download videos and pictures.

  Hi Davo1957,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to connect the device to a different USB port and check if the problem persists.

  Method 2: There are chances that the USB cable may be defective. You can check the device connection through different threads.

  Method 3: You can run the Microsoft Fixit from the following link and check if the problem persists.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 4: You can follow the steps in the Microsoft Knowledge Base article and check.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

   

  Method 5: Install the drivers updated and chipset for the device and check the results. You can see the article mentioned for more information below:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Let us know if that helps.

• the power cord of the ac for my iphone charger 6 will work in the USB port in the car for the load

  Looking for a car charger for my IPhone 6.  Wondering if the cable operator in the House will work in the USB port on a car?  It hurt my phone.

  Yes you can. As long as you have in the car's USB port. It can load more slowly then wall charger, but it works! I load mine in the car all the time

• How to read the data in a device connected to the usb port

  Is there a class or object, or the piece of code in Java that is comparable to the PDQComm32.ocx and the mscomm32.ocx used in VB6? I need to know how to read the data of a device plugged into the usb port of the BBerry. Is it possible to use the BB to read data from a device via a usb cable?

  I'm new in Java and I'm looking for the opportunity to write a project to read the data in a device with this program that can turn on a BB instead of on a pc.

  Thank you

  Did you watch net.rim.device.api.system.USBPort?

  That's what the doc says:

  Provides access to the USB port of the device.

  Avoid using this class in applications, as it is not portable. On the contrary, if you need to access the USB port, use factory CLDC Connector to serve a connection.

  Rab

• the Windows 7 usb Installer may not work on the usb port 3

  Windows 7 install usb does not work on the usb port 3 with 32 GB usb 3 keys, says he needs a cd/dvd driver?

  but there is no cd drive in this machine.
  Works very well with an old USB 2 on usb 2 & usb ports 3 in the same machine.
  But no usb 3 key into a usb port 3?
  any ideas?

  Thanks anyway JW stuart.

  I managed to find a way to do it, I needed to set the usb drivers 3 unzipped on a 2nd USB on usb port 2 to use when the Setup program has been started and lost the USB 3.
  the ol F6 trick always works with win 7 and is more flexible, now that it allows pilots more than just raid.

• Some devices not recognized by USB ports

  My USB ports seem to have problems with grateful some devices connected via a cable, while having no problem with reading others.

  For example my SteelSeries mouse and keyboard are connected via USB as well as the Xbox 360 controller, and they work fine. However, to connect my Nikon D60 or Lenovo A3500 Tablet gives me message "unrecognized USB device". The computer not being able to read the camera is particularly odd, because he had no problem reading Nikon D3500 of my mother. From the logical point of view, the question is meaningless to me, and Googling the problem no results and more often given solutions have failed.

  I wonder if there is a solution, I missed again.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (works on win 8 & win 10)

• Satellite M300 - works only one USB port on the right side

  Hello

  in the series of M, Toshiba M300 satellite (red), there is a port USB combo and something else, and also another USB port ordinary on the * left * side of the laptop. There is also a USB port on the * right * side.
  Currently, for some reason, on my right, the USB port works (in other words, the laptop detects) and my left side, where there are 2 USB ports, it does not work (in other words, it does not detect it) I have no idea how solve this problem.

  And what happens if you connect the external USB mouse?
  It work?

  > I have the toshiba recovery of the burned disc, should I use it?
  Why not, you can test it with the new operating system preinstalled too.

• Why can't load my MP3 does not work on any USB port?

  I tried all USB ports but nothing works

  Contact the manufacturer of MP3 player support.

• I have a mouse Microsoft Wireless Mobile 4000 and it won't work in the USB port that I need.

  The port that I need for work is where I took out the logitech corded mouse.   How can I fix it?  It works in another port, but not the one I want.

  Hello

  1 did you changes to the computer?

  2. you receive an error message?

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows FIX IT:

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 2:

  I suggest you to see link and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  I also suggest you to see the links and check.

  I would say as update you the USB drivers and check.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  What to do when a device is not installed correctly:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

• Satellite A200 - USB Ports stopped working

  Hallo, I am DESPERATE for help, please.

  I have a Toshiba laptop Satellite A200 series with 32-bit Windows.

  My USB ports give me major problems.

  I use a USB Internet Modem on multiple computers and it works fine on all computers, including Toshiba.

  A month earlier, Internet USB would suddenly and constantly disconnect itself from the Internet, when I use it in the USB one. When I use USB port two, he recorded no more. The port does not have the device.

  Two USB ports work well when used by other USB products.

  I had always used Internet USB into the USB port, with a cooling for my laptop fan, USB 2 port. Now, when I insert the cooling fan, USB Internet disconnects and will not register, at least I have remove fan, remove and reinsert the USB Internet.

  I did the following:

  1. start an anti-virus
  2 uninstall, re-install and update all the drivers for the USB, chipset famlies, Internet Modem ports, EVERYTHING.
  3. I checked with my Internet provider, the problem lies in my PC, not them.

  I don't know what to do, I'm tired.

  Help, please!

  Now, when I insert the cooling fan, USB Internet disconnects and will not register, at least I have remove fan, remove and reinsert the USB Internet.

  I think that it is a problem of USB power.

  The USB 2.0 port provides 500mA, and in some cases more than USB ports can be connected to the same power supply to the motherboard.
  In case the USB device connected (in your case fan) would need more than 500 ma, it could be that other USB devices do not work correctly.
  I recommend you go to Device Manager and select the properties of USB controller.

  The last "Power Management" tab contains the option to turn off the device to save power.
  This option should NOT be checked. It should be disabled.

  Check it out.

• Equium A60 - 692 USB Ports not working not

  Hi all - new to the forum and what a good place to find info on Toshiba laptops. Anyway - after a recent storm, I lost connection to my ISP broadband - contacted the helpline who advised me to Exchange my ADSL modem to an Ethernet - made and corrected the connection problem - however - only after having it done I realize has none of my devices (printer, camera, Web Cam etc.) worked via the USB ports. I've uninstalled and reinstalled the system and drivers for devices without result. The device displays 500ma of power manager is available for each of the 3 ports but watch 0ma used. The Device Manager also shows that the USB ports are working properly. Can someone help or advise if these ports on a separate card or they are part of the motherboard. If Yes, where can I get a. Congratulations to all - Andy

  A lighting strike is not good news, if she gets hit by a kind something can go wrong. My guess is that your laptop USB ports has taken suddenly by a massive power surge that probably damaged the chips inside. It could be a Windows problem, or not the only thing I could suggest is to use a bootable Linux such as Knoppix CD and run a command called usbview with some USB devices.
  If the USB has been confirmed dead then your only option is to use an adapter CardBus USB 2.0 providing your CardBus slot is not damaged too.

  Richard S.

• Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.

  I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.

  I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.

  I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.

  Drivers that do not work on Windows 7 32-bit are:

  Realteck RTL8188EE 802 - 11 b/gn witeless lan

  Die Ethernet Realteck and

  Intel High definition graphics driver

  That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.

  So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?

  Hello:

  Should be no problem to get W7 32 bit to work on this model.

  Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.

  Your model uses only the Intel HD graphics driver.

  The first pilot, you need to install the Intel chipset installation utility and reboot.

  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5359407&AC.admitted=1408825729704.876444892.492883150

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  If for some reason, this model Intel HD graphics driver does not work, use this one...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713

• My USB Ports don't work, but they still have the power to impose measures.

  I have a Toshiba laptop (A205-S5859) and all 4 of my USB ports do not work.  I am running Vista Home Premium.  Sometimes they detect an 'unknown device', but it is not very useful.  They also always charge my blackberry.

  In my efforts to fix it, I have:

  * disabled/enabled all 4.

  * uninstalled/installed all 4

  * Made some USB ports are initialized in my BIOS

  * some thing I have updated BIOS updated

  What can I do else?  Help, please!  I'm desperate to be able to sync my new blackberry with my previous all my info is on my computer.  I also want to be able to sync my blackberry on my computer in the future...

  Hello

  Even if you did some of them previously please follow these steps in this order.

  --------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• SOME DEVICES WORK DOES NOT THEN STARTS TO SPARE

  I have recently upgraded to Windows 8 Windows 7 and now I'm having this problem.

  At the start of some of the features not working and not see the same in the Device Manager. As some of start, Bluetooth and webcam does not work, on another USB port isn't working and sometimes all the these do not work.

  One thing is that only USB 2.0 does not, while the USB 3.0 ports work and it is a SIGN of TILT on the 2.0 device in the specific DEVICES MANAGER. But when I turn off and turn back on, it works fine but I can't do something on the Bluetooth device or the imagery.

  My PC is DELL INSPIRON N5110. I have already updated all the drivers from the website of the manufacturer for Windows 8.

  Help, please!

  I would try to disable the quick start System.  This QuickStart uses a special kind of hibernation of driver that is not compatible with all devices and drivers that have been built before Windows 8.

  You can go to the control panel (press Windows + X to get there easily), then Power Options to disable it: