Problem of C870D - 12 k Hdmi satellite

Similar Questions

• Strange problem with its virtual on my Satellite A100

  I have a problem with Virtual Sound on my Satellite A100-638 with Windows XP. If VS is turned on and Windows plays a sound of Windows, as when an error appears, the volume increases.

  When the VS is off, the problem does not exist, but I would have turned on VS, cause, I play a lot of music! I tried to upgrade level or upgrade to other versions of VS, but the problem is still there. I also tried to uninstall and install my sound card drivers.

  Can someone help me with this?

  Hello

  I put t know what is the problem. Your description is incomplete and very strange.
  Usually it's not easy to say what's wrong because you have already installed the 3rd party applications that could only unique functions or have a bad influence on all operating systems.
  I assume that the registry is damaged.

  If we can continue the speculation after the recovery completely portable.

• No sound through HDMI - Satellite P300-135

  When I plug the HDMI cable from the laptop to my tv, I have no sound in the speakers on the TV, I only got sound in the laptop speakers. Could you help me solve this problem?
  Notepad is Satellite P300-135.

  You have enabled digital output (HDMI) in reading device? You can find it in the sound properties.

• Problems of helmet speakers on dualboot Satellite Pro C50-A-1KV

  Hi all.

  I have a serious problem with Toshiba Satellite Pro C50-A-1KV. I have win7 x 64 and Ubuntu 14.04 x 64 on this machine. It was first installed Win7 and later Ubuntu 14.04.

  I tried to use the headset while I was logged on ubuntu and there is no sound, the sound was cut out of the speakers but headphones did not work, when I plugged it out I still have the sound on the speakers.

  After reboot I had no sound at all on ubuntu, and when I go to windows, the problem worsen for windows also. Right now it seems like some time the sound is on the speakers, but headset is dead, some time ago his headphones and speakers.

  I have no idea what is the cause of the problem. The win7 and ubuntu have been kept clean, only the updates have been downloaded. I think that the driver has some problems, but how could I make it work. To test, I tried to use Skype and there was a situation where I have the sound on the speakers and headphones, but then the microphone was death-_-'.

  I have a few pieces of it and the exact problem is on half of them. I have 2 deliveries.
  The first onewas ok, everything works. Either everyone has this problem :/

  I tried to make a backup on model where it is working and windows backup restore and install new ubuntu but it did not work.

  Any suggestions what may cause the problem or how to fix?

  I think you should first clarify whether your headset is OK.

  My theory is that your helmet could be faulty (maybe a broken cable or something like that) and that's why speakers and headphones will not work when the headset is plugged into the laptop.

  Laptop computer's headphones Jack supports a small switch that allows you to disable the speakers while the headphones are connected.

  If in case the headset is faulty, the speakers and the headphones would not work.
  So I think you should check the helmet first.

  If you are sure that the earphones are OK, then I think there could be a problem with the little switch in the headphone jack.
  Why? Because I can't imagine that this could be a software / driver problem because the same question is displayed using Linux as well as Windows System.

  The two systems are completely different and that a software / driver problem in both cases, it's almost unbelievable.

  However, I still recommend setting the laptop configuration using the procedure of recovery Toshiba in order to check if the noise problem using Toshiba preistalled system configuration and factory

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• problem with cd/dvd on my Satellite 1900 303 drive

  Hello world
  In 2003, I bought a Satellite 1900-303. Recently, it's the cd/Dvd drive has stopped working properly. whenever I put a Cd in the driver, it assumes that the CD is an audio cd. If the CD is completely cd Audio or partially contained audio files that it opens the cd with no problems. But if the cd is a CD or software for data CD after having tried long time my system hangs. I change the properties of the Cd drive settings in the section of AutoPlay of music file to other options such as "mixed content". but after inserting the CD in the drivers it agains automatically replaces the file 'music '. I showed my book expert in computer system and ease, he tried to reinstall windows XP to fix the problem but it did not work. Since the driver did not work he used the external driver to install windows XP. but the problem has not been resolved.
  Is there someone who knows by chance that I have to do to get it back?
  Waiting for useful tips.
  Vahed

  Hello

  your friend installed the XP from a Cd MS or on the Toshiba Recovery CD?

  To my Toshiba laptop computer, AutoPlay section is also set music file and working properly!

  When this failure occurred for the first time? Did you use the recovery option of system SM at the beginning - accessories - prog. -Recovery system
  Perhaps the backsetting of your system to solve the problem!

  You can also check if a firmware update is available for your car! (If it's a Toshiba drive go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

  Hans Bye

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Solution found to the problem of "BAD RTC BATTERY' on Satellite Pro 6100

  Hi, I'm from the Italy.

  I myself have solved this problem without changing the motherboard on my laptop second hand satellite pro 6100.

  for info: [email protected]

  Hello

  may I ask how you solved this? I have the same machine and this error pops up sometimes.

  Welcome them

• Problems with map graphics on my Satellite A60-672

  I have a Satellite A60-672 which graphics by ATI. Repeatedly at startup until it broke down and the system crash online said whenever it is ATI technologies. I sent ATI and they said that there is nothing to do with them.

  I tried Toshiba, but none of the work address by e-mail. The crash system tells me to uninstall the software, but given that I put on, I mistrust all this as it may ruin the functioning of my laptop.

  Currently, my laptop works very well with this ongoing problem. This happened to someone else or we know how to contact toshiba.

  Thank you

  Sounds like a driver problem, you just need to download the Toshiba display driver, uninstall your old ATI driver with the ATI Control Panel, restart and reinstall again.
  don't worry this will cause anything on your laptop in addition to repairing damaged files that crash. It is a simple operation.

• Problem of cooling system on my Satellite C660

  Hello

  Have a new Satellite C660 I used it for 2 months and he started to give me the following system warning

  It has detected a problem with the cooling system please pay immediately the computer and return it for service.

  So what could be the problem I imported the Zimbabwe, which means that it is difficult to return it for service

  In my opinion, it is not important what can be the problem. Important is that this must and should be solved by the authorized service provider. Warranty will cover all costs for replacement of equipment.

  I guess this can be problematic in your country, but I put t see any other solution for you.
  Where have you bought your laptop?

• Problems with online information product Toshiba Satellite R830

  Hello! I just bought a Toshiba Satellite R830-146 with the following general specifications:

  OS: Windows 7 Home Premium
  CPU: Intel i5 - 24010M
  RAM: 4 GB DDR II
  HARD DRIVE 640 GB

  I had install/configure these days.

  In addition to the original, Aministrator account, I first worked with what turn on the machine and the installation/configuration of starting the process, I had to create another account to user with administrator privileges. The reason? Because the settings of Internet Explorer 9 in the original Admin account were somehow gone corrupt: some web pages that I absolutely have to work with because of professional reasons cannot be properly charged more, and these web pages are only compatible with Internet Explorer, not any other browser, Mozilla or anything like that. After several hoyrs work trying to solve this issue, I couldn't find a way to solve it.

  So I created a second administrator. User account (with the intention to delete the original Admin account if it worked OK); and in the admin again. account 9 IE works fine in any web page but I this is my problem with the Toshiba application online product Info begins.

  Namely: Toshiba OPI app doesn't work at all in the admin again. user account, even if it worked perfectly in the original account of amin - and it still doesn't work (I haven't dared delete the admin account of origin). When it is running in the new account admin, Toshiba OPI shows only an error message. I tried with UN-install the utility, then put it back in the admin again. account - no result, problem still there and Toshiba OPI still works fine in the oldest account where the IE 9 settings are corrupt, but false in the new, where everything works fine.

  So, why don't I just uninstall Toshiba OPI, delete the older admin account and forget all about?, you ask. Well, because among all the specific software Toshiba provided with my machine, this seems to be the one and only piece of software that maintains a current alert on, locates, downloads and installs the necessary drivers, BIOS updates and other. Software specific to the computer of the machine it does basically what Windows Update performs the operating sistem. Like many other users, I usually end up uninstalling the pre-installed software, specific LABELTEX, most of the machines that I buy, because it most of it isn't useful. But I still like to preserve the piece of software specific LABELTEX update which is updated regular with LABELTEX criticism or specific patches to the computer/model instead of having to regularly visit Toshiba support & updates page to see if it is something urgent. And this piece of software in question seems to be Toshiba OPI utility, in this case.

  So I wonder if anyone has a diagnosis of why this does not work in all the admin. accounts (and no, the problem isn't that I do run the program with two admin accounts connected and active I already checked that), and how could I solve apart from uninstalling the Toshiba OPI and oblivion, that would be very easy , but I would not do.

  Thank you very much in advance for your help.

  In the last years I ve changed 3 portable Toshiba and the first thing I did was to remove the OPI and several other specific applications of Toshiba. Why? All of them start with Windows, slow start-up of the laptop, run in the background for nothing.

  My experience Toshiba doesn't offer new things every day, so in general you can use OPI every two months to check whether or not something is offered again. You can do this when you start your laptop with the original admin account.

  You know, that these questions are not easy to explain. Toshiba has tested pre-installed software and functionality with the original account. Who knows what is corrupt with your admin account and what have you done in the past.

  In my opinion, if you want to keep your configuration, stop OPI to run with your extra account and be happy. Each connection of two months using original admin account and check for updates.

• Problem of C50-A-19 t satellite with TOSHIBA Recovery Media Creator

  When I try to do recovery dvd with TOSHIBA Recovery Media Creator burning fails.

  I have the Satellite C50-A-19 t with TSSTcorpCDDVDW_SU-208DB_T cd/dvd-rw unit.

  During combustion process, I get an error saying it is impossible read the file D:\ZZImages\ZZImages\install29.swm (file .swm in error change with different attempts).

  I selected the option to verify the dvd after burning.

  I tried several times: I try to make one dvd (requires 3 DVDs for a full recovery).
  I try 2 times with verbatim dvd + are trying the fist failed, the second succeeded with the same kind of support.
  I try to numb DVDs. 2. for two times with dvd - r and dvd + r support and it has not yet.

  On the windows error reporting, I find this error:

  and this alert:

  + Updated Firmware ODD problems with Toshiba Recovery CD Creator +.

  I see this solution to update firmware for different models of units of cd/dvd-rw

  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  but not on the model I have.

  I have:

  TOSHIBA Recovery Media Creator version: 3.1.02.55065006
  Windows 8.1 x 64.

  Is there a solution?
  is a known problem?

  Thank you

  Elena

  > I don't have a free USB key to test the usb mode.
  I recommend you to buy a separate USB memory key and to create the eventual recovery USB flash memory support.

  Please also check this other procedure described in this HowTO from Toshiba
  [How to create a recovery media USB flash drive to the valorisation of the ISO images - or (DVD) discs | http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]

  Comments are greatly appreciated

• Problems of the product on the Satellite Pro A200 recovery

  Hello

  I have a Satellite Pro A200. She runs very slowly and sometimes it crashes when I connect.
  Also the homepage was hacked and I tried several anti-spyware and they did not work.

  I have the product recovery disc, but the problem the DVD rom drive stopped working.
  The light is on, but it will not open unless you use the manual unlocking.
  I removed and checked the connections, but it seems okay.

  The CD-ROM/DVD-rom has disappeared from the Device Manager and does not come under the material.
  I tried the system restore, but it won't work.

  Is there anyway that you can use the product recovery software if you start from a USB?

  I tried to restart the computer and choose boot from CD, but it won't give me this option.
  I looked in the bios and only boot options it gives are hard disk, CD rom, land and FDD

  > Is there anyway that you can use the product recovery software if you start from a USB?

  No, this Toshiba recovery disc cannot be copied to USB flash memory and used for installing the OS. I'm afraid that it would work not m.

  But if you have a Microsoft Windows CD, you should be able to create a USB bootable flash stick. In internet, you will find lots of useful instructions step by step how create this bootable USB key.

  But boot from USB flash memory stick must be definitely possible since the BIOS supports bootable devices on:
  Drive floppy USB, HDD, ODD, Network (LAN), USB memory