problem of child objects

Similar Questions

• child object clickable

  I have added a click on a child object that is not always displayed event

  Her pearent object also has on the click event.

  There are two problems.

  1)

  Whenever I click on the child object onclick pearents behavior runs as well. I don't want to do.

  2)
  The object of the child can be clicked on even though I have set its alpha to 0, or its display property set to false or send it to the back of the stage. In other words, that its behavior can be invoked by the user, even if it is not visiable

  to say it another way

  I'm not the subject of the child to be clickable, when it is not displayed
  I don't want the subject of pearent be clickable through the child object

  How to solve these problems?

  1. use the method stopImmediatePropagation() of mouseevent in your child

  2. give your child mouseEnabled property to false, remove of the displaylist or set its visible property to false.

• Problem of scaling objects

  Recently I have problems scaling of objects in Illustrator.

  I created an 8 x 8 mm rectangle and tried to Center on a 10 × 10 mm in canvas. What gave me Illustrator was 7 761 × 8 114 mm rectangle, which would not focus (this is a bit off). Whenever I try 8 mm across the rectangle it now clings to the 7 761 × 8 114 mm.

  I turned on and off at each function snap to grid, I could find, nothing works.

  What I am doing wrong?

  I use Illustrator CC on a Mac with os x Mavericks.

  See you soon

  CORVIN

  CORVIN,

  I think that you are haunted by the ghost of align it on the pixel grid .

  You can select the entire document and in the Transform palette, uncheck align on the pixel grid and also uncheck align new objects to the pixel grid in the Options.

  Snap to grid of pixels is the default value for certain types of documents.

  You can avoid those, or change the default value.

• A little problem with an object

  Hi guys...

  I discovered a problem with an object, but I Don t see where the problem may be...

  I have a 'bomb' added to the step only if the var bomb is greater than or equal to 1... and, of course, if you enjoy it, the var Gets a-... However, after a while, it seems once again

  Any ideas?

  Here is the code bound to it:

  var dynamite: Loader = new Loader();

  Dynamite.Load (new URLRequest ("dynamite.png"));

  Dynamite.x = 650;

  Dynamite.y = - 10;

  var bombsound:Sound = new Sound();

  var bombsoundChannel:SoundChannel = new SoundChannel();

  var bombreq:URLRequest = new URLRequest ("bombexplosion.mp3");

  bombsound. Load (bombreq);

  If (! level) {var level: int = 1 ;}}

  var lvlup:int = 200;

  var updlvl:int = (lvlup * level);

  If (!) (Count) {var count = 0 ;}

  If (! bomb) {var bomb: int = 1 ;}}

  dynamite.addEventListener (MouseEvent.CLICK, buttocks);

  function bum(e:MouseEvent):void {}

  If (sonido) bombsoundChannel = bombsound.play ();

  -bomb;

  If (bomb == 0) {}

  If (dynamite.parent) {dynamite.parent.removeChild (dynamite) ;}}

  kill every1

  }

  function level1(): void {}

  If (level == 1) {}

  addChild (nivel1pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level3(): void {}

  If (level == 3) {}

  removerViejoNivel();

  addChild (nivel3pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level5(): void {}

  If (level == 5) {}

  removerViejoNivel();

  addChild (nivel5pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level7(): void {}

  If (level == 7) {}

  removerViejoNivel();

  addChild (nivel7pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level9(): void {}

  If (level == 9) {}

  removerViejoNivel();

  addChild (nivel9pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level12(): void {}

  If (level == 12) {}

  removerViejoNivel();

  addChild (nivel12pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function updateLevel(amount:int):void {}

  level += amount;

  Level1();

  Level3();

  Level5();

  level7();

  level9();

  level12();

  }

  Level1();

  Level3();

  Level5();

  level7();

  level9();

  level12();

  Thank you!

  Use the function trace to track when the bomb is added.  IF this happens in each of the functions level, then add traces to everyone to see where and when that happens.

• Canvas, click events for the child objects

  I am trying to record an event for each child object.
  and I use the following code
  
  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=events_08.html
  in the part of the examples (second example)
  
  However, I am dynamically add custom Image objects extended and when click on a displayed Image and check for its type if its correct type, it would just return false.
  Alert.Show ((event.target_est_dans_MyAClass).toString ());
  
  When clicking on one of the children is opposed and display the event.target.name and it's just also displays a silly 'FlexLoader74' or whatever number. Somehow, it loses its properties or the type of the object.
  
  Is there something that I am missing?

  The loaded image, you click on IS what would return with event.target. It is added to your image class extended as a child of this class. So it's probably that you want to do:

  Alert.Show ((event.target.parent_est_dans_MyAClass).toString ());

  Keep in mind that if EMBED you your images in your image personalized instead compile-time class, then you can check for this as you did before:

  Alert.Show ((event.target_est_dans_MyAClass).toString ());

  TS

• Problem with child custom form

  Hi all
  
  I am designing a connector that works with LDAP for OID synchronization. This connector provisions Unix users can have the attribute 'host '.
  
  I drew the shape for a child table with a search that refers to a list of hosts. I created the java code in the following way:
  
  AddHost (input1, input2,..., "BOLD" )
  
  The input parameters contain information for calls JNDI change the LDAP user. The last input parameter is the host that is to be added.
  
  From my understanding, when you build the list in the child form, each entry is individually used by the method. So, if you have 3 hosts: HostA, HostB and HostC, there are three calls to the AddHost method.
  
  AddHost (input1, input2,..., HostA )
  AddHost (input1, input2,..., HostB )
  AddHost (input1, input2,..., HostC )
  
  However, I'm having a problem where whenever I have add an item to the list of the Child Table, commissioning ends with the following error:
  
  DOBJ. GEN_ERROR
  Unable to save the calendar, a task to change the child table, annex article failed: unable to save the calendar, a task to change the child table, annex article failed
  
  Now, I traced the variables of the adapter for the Add and Remove hosts adapters to the hosts on the child form variable. I also checked the box 'allow several. " I checked the code works on its own, and the input variables are the same in my NetBeans IDE, as they are in the adapter mappings.
  
  Anyone know what is happening here?
  
  Published by: 806409 on December 21, 2011 09:10

  How about adapter mappings, response code and task status object mappings? Are they all fixed?

  -Marie

• Permutation of Interfaces of child object in a sous-schema control

  Greetings!

  I'm working on a project where I am trying to use a LVOOP magic.  My code is still a mess and accountable, so I'll try and keep this post direct and precise.

  My class tree is farily simple.  A parent class holds all the screws needed to replace and some common database information.  Each class of the child needs its own User Interface to run because each will have its own set of controls.  These controls to manipulate the internal settings of the object, and when the town 'Generate.vi' is called it displays text that the rest of my program then uses to complete the operation.

  My thought was that I could do a 'User Interface.vi' and 'Get User Interface.vi' as substitute it in my parent class.  Versions of these files children would then contain the necessary user interface, and the Interface.vi of the user would happen the reference to the Interface.vi of the user which would be then sent to the Sub panel and allows to get values in the final of the Interface.vi of the user when the user clicks on the "Generate" button in the Interface.vi of the user.

  This seems like a reasonable approach?

  I'm not sure I understand what you want, but this might be relevant.

  http://forums.NI.com/T5/LabVIEW/an-experiment-in-creating-compositable-user-interfaces-for/m-p/12623...

  http://forums.NI.com/T5/LabVIEW/A-more-successful-experiment-in-creating-compositable-user/m-p/12768...

  In addition, click on the links to see some more relevant info.

  Note that in general, it is claimed that classes should not export ISU because you can have different user interfaces (location, options, etc.).

• Problem when creating objects to the point user clicks on the screen

  I'll sometimes have a problem when clicking on the screen and have an object at this time created. 95% of the time it works properly, but sometimes, the object is created in a different area of the screen.

  Everyone comes across something similar? Or is it likely to be just a problem with the Simulator?

  Thank you very much for any help offered.

  If you want a "newLabel" to appear in the contact details of your mouseEvent, but only if details of mouseEvent are lower on the screen (having a higher value) at the height of your textButton.

  If your TextButton object does not touch the top of the stage (y = 0), you'll want to write this instead:

  if (event.localY > textButton.y + textButton.height)
  

  It may be a good idea to write it anyway, just in case you want to change the position of the TextButton.

  In addition, localX and localY properties of your mouseEvent are compared to the event containing sprite.  for example, if you have a canvas Sprite that is a parent of your textButton and is tuned for the mouseEvent.  otherwise, if there is no sprite contains (second phase) for your event, you'll want to use stageX and stageY instead.

  I guess since I can't be sure of your intentions here, but try this instead:

  private function createItem(event:MouseEvent):void
       {
       if (event.stageY > textButton.y + textButton.height)
          {
          var newLabel:TextField = new TextField();
          newLabel.x = event.stageX;
          newLabel.y = event.stageY;
          newLabel.text = "test";
          newLabel.setTextFormat(userTextFormat);
  
          addChild(newLabel);
          }
       }
  

• Problem exporting? : objects in front or on the upper layers are not displayed when exporting to jpeg or png

  It's very strange. The image looks perfect on board art .ai. But, when I try to export the image (in jpeg or png format), one of the objects which is clearly backward masks in front of other objects. I tried transfer to different layers to ensure that it wasn't one thing front to back, and it's the same problem.  When I changed the color to the front (or on the top layer) object from white to a color, it resembles a kind of effect/appearance/transparency problem goes away, but there is no transparency applied to each of the objects. They are all natural and 100% opacity.

  This is the banner of solid color behind the type indicated (see below) which is the problem. I tried regular objects (instead of specified type and same problem.) I just upgraded to the latest version of Illustrator, no luck.

  Here's what it looks like on my screen:

  

  but here's what happens when I export (or save for web)

  

  It seems, when I save in PDF, incidentally.

  Check that you do not have these elements the value "overprint"?

  Look at the attributes Panel when an item is selected.

  White text should NOT be set to overprint.

  ?

• Problem with pinned objects objects/non-epingles on the same page

  I have a vertical menu on my website that appears on every page; It is attached on the upper left corner. On many pages of my site, I pinned objects (images, text, etc.) adjacent to the menu PIN. Almost all the scrolling on my Web site is parallax scrolling (horizontal or vertical). I'm running into a problem where, depending on the size of the browser window, not pinned ojbects overlap the menu PIN. The positioning of objects on the page seems to depend on whether or not the pinned object; I guess my question is possible to the objects of the PIN over another? I want the menu to stay no scrolling, but I want to make sure my non pinned objects passing never cross / overlap of the menu because it looks so sloppy. The question arises when the browser window is too small, but again, I want to make sure this will never happen anyone who is looking at my site. The first photo, this is how it should look like (what it looks like when the browser window is large), the second photo is the problem that I'm trying to fix.

  

  Just read here:

  NAV/menu hidden behind images bar

• Problems with library objects / Smart in 2015 CC

  Everyone is having a problem with their library all convert to dynamic objects?

  Before the 2015 update, I could drag multiple items in the library [a form of vector of arrow in this case] to my documents and change their colors independently. If I need to be black and white, it was easy to pass. Drag the item from library to the screen, double-click on the layer, choose a color.

  Now, I can't do that. Library items seem to have their own "container" If you want to, which houses a dynamic object - change the objects replace everything in my entire file. Now, using work plans that can be 20 arrows - pretty boring.

  Someone at - there workaround / best way to do this? I have the layer styles, but that seems daunting.

  THX

  option/alt drag place also in layers.

• The problem of the object selection

  Hello. I'm pretty new to Illustrator, and I'm frankly quite easily frustrated. I only used Photoshop in the past.

  Here's my problem. I did a logo in Photoshop but "strokes" sucks, and I want a sharp edge. That's why I want to 'offset '.

  But I can't select the option and also select my object as I see it is in the tutorials.

  Here is a picture of what I mean, I can't get an adequate selection around the logo itself.

  http://i1024.Photobucket.com/albums/y307/OfficerNice/fuckinglogo_zpsta2e2mpy.PNG

  Don,

  Path of compensation works only with the traces.

  You can Trace the logo Image, have ignored done white TIC TACS and then expand the Trace of the Image. After that, you can use offset path.

  The question is if you get the clean look and accurate this way.

  You can consider new path with the tool pen on top of the raster image locked.

• Problem of moving objects by small increments

  Hey everyone, I've seen this similar question before but none of the solutions seem to help my problem. I'm trying to move an object in a fairly small increase, I have the box Increments preferences keyboard set to its lowest number, but I still need to move my object 1/3 as long. I also tried to manually move the object to the correct point with my mouse and it takes just return to the area where he was sitting, which was as close as I could get it with the help of the arrow keys. I disabled to line up on the grid and snap to point, no change in my result. Basically, I am trying to align a smaller triangle on a part of a larger triangle to act as an area of shading. All solutions? Thanks in advance.

  mblaney,

  It looks like the attribute Align to pixel grid ghost haunting you, as SRiegel suggested.

  Or maybe snap to grid.

  Are both unchecked (the former when the black triangle is selected)?

• How to configure the application for child object View?

  I have a hGrid standard layout. Two display objects are present, sign in using the link display. I need to define where clause in the child View object. The changes themselves do not appear when I put the where the clause. Also when I try to extract rowCount returns 0 for child View object. But I'm able to get the parent View object value. Any suggestions please.

  Hi Shrikant,

  Thanks for your replies. I was able to find a solution. Was able to achieve thanks to the functionality of the rowset.

  Kind regards
  Pradeep

• [JS] A new child object

  Hello

  I may be question of a beginner-how can I define a new object (i.e. the polygon) as a child of an existing rectangle? (If the new object is placed in an existing one.) I am able to do this by cutting and by pasting in but I do not like it.

  TIA

  Rectangles have a collection of polygons, you can do:

  myRectangle.polygons.add)

  You will need to provide the appropriate parameters for the call of the add() method.

  Dave