Problem of control NFC

Similar Questions

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

  I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

  1) update your nVidia/software drivers to the latest version for your model video card + operating system.

  (2) check that the equipment is not defective.

  This is not a Microsoft / number of the operating system.  For additional troubleshooting - contact the manufacturer (nVidia).

• Problem remote control RM-LVR2V Live-view

  RM-LVR2V can't conect with my camera AZ1, after that I updated with version 2.0 remote control

  Can I solve this problem. Sorry for my English

  Then. Hi again.
  I am happy to tell you - the problem is solved
  How?-turn on the remote and the camera.
  Use the button on the remote control and the cam rec start beny-BAA...
  right now must use wifi camera button until the beep stops.
  After that this remote control can be used with the camera

• Problem with control could not be loaded

  When I try to run this program, this figure shows the control could not be loaded. After the installation of NI LabVIEW Run-Time Engine, the problem is still there.

  I'm trying to find a solution.  Any help would be greatly appreciated.

  

  The LabVIEW runtime engine is not for that. Looks like you're missing the OL - 770 activeX controls.

• PCI device & problem Driver control Ethernet in HP 2000-2128TU

  Name of the product - HP 2000-2128TU

  Windows 8 and 7

  After using a few months Windows 8 in my laptop suddenly I did deal with any Modem does not work. Unable to connect to the internet. Then I found after a huge search with some error in PCI Device Driver, Mini Port network.  And I can not solve. Then I downgrade mu camera to Windows 7. Now each Modem works well, but I have the same error my Ethernet Control PCI Device Driver & driver.

  Help me how I solve the problem. I don't know yet what kind of problem it is. but I got the error in the other devices section of Device Manager.

  Hello:

  Here are the links to the W7 drivers you need for these two devices:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104713-1&CC=US&DLC=en&LC=en&os=4063&Product=5305458&sw_lang=

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104710-1&CC=US&DLC=en&LC=en&os=4063&Product=5305458&sw_lang=

• Problem by controlling a clip inside a clip

  Hello

  I have a problem in the control of a clip within a clip

  In fact, I have a clip on the stage. Inside of a clip that I have 4 frame. In the third frame I movie clip called "clickicon". If a condition on the main frame is triggered should controll the clip on the third frame (clickicon) making it to Stop in the second picture

  If the code to do the inner movieclip go to section 2 is not in the framework where the innder movieclip is then a way to solve it is to have the inner movieclip in all settings, but turn visible/invisible to the need.

  So in all the frames, you can visit in the external movieclip, you can have a command to make the invisible inner movieclip. In the frame where you want visible internal movieclip is where you set its visible property to be true.

• Problem remote control Apple TV (not the App)

  Hello

  I have an Apple TV (3rd generation) and the remote no longer controls.  I have it odd and paired again, but still does not work.  I downloaded the Remote app, but that does not give me access settings, and that's what I have to do.  We changed provider Internet and the need to configure it with the new password, so he goes on the network... Any suggestions?

  TKS

  SACA

  When you say that the remote control does not work, to what it means? It is not recognized? It is not a click? Installed new battery?

  I was using the Remote with ATV 3 years app and it works beautifully. If it is coupled?

• Satellite X 200 - 15 K and problem remote control

  I installed windows 7 x 64 on my x 200-15 k and the remote control does not work.
  I installed a few irda drivers found on the download page of Toshiba X 200, but still nothing, and it does not show any device irda in device manager...

  Is - this remote controller only for windows Vista (originally on my computer when I bought)?

  Thank you
  Milos

  > I installed some drivers irda...
  Sorry, but you cannot use some drivers and later wonder if the remote control will not work correctly.
  I checked the Toshiba download page and drivers Win7 for Satellite X 200 PSPB9E are not available.

  So when you have appropriate Win7 drivers, we can discuss about the functionality of remote under Win7.
  All you can do now is to test it with the drivers for the 64 bit version of Vista and hope it will work...

• Re: Problems of control Ethernet on Satellite L300D

  Hello guys,.

  Last month, my portable isacting crazy.
  Only randomly, it shuts down and tell me that something is wrong with the ethernet controldevice and I put in the startup disk.

  The strange thing is, when I restart the computer, everything seems fine, even Vista it self tells me that everything is turned on and properly installed.

  And the funny thing is when I bought my laptop weren't any CD that is next to it in the box... because everything was preinstalled. I only got this thing of recovery and a Partition with Vista on himself. But I don't know what to do.

  I hope you can help me with my problem.

  Greetz
  Marion

  Hello Marion

  New laptop models are supplied without CD/DVD media. Recovery image is recorded on the second partition of HARD drive. Toshiba has preinstalled small application called Toshiba recovery disc creator (the shortcut is placed on the desktop) and you should use this tool to create the installation of recovery disc.

  Please check this and create recovery DVDs using DVD-R media.

  To be honest I don't know what the problem with the Ethernet device and I can't say for sure why this happens. Are that updated Microsoft automatic set?
  As far as I know under optional updates often ranked driver for Ethernet device. This driver should not be updated or changed then maybe is this problem because of some update.

• Weird problem with control of the ring and foot

  So I have some sort of weird issue with a control of the ring and a chart. I'm with LabWindows/CVI on a Windows 7 computer. The part of the program I'm looking at is basically to navigate through data - there are several "transition" (rehearsals experience), and you can choose the one that you want to watch in the list.

  Normally, you would select transitional in the list, it plots the data, then it is done, basically. However, all of a sudden (don't know how long it spent for), when I select anything except 'Average', he made all the tracing and such, then it changes control of the ring to 'Average' (it is not plot the average data or generate all the reminders that I can tell).

  Now the thing the more bizarre as you can see below, it seems that the switch happens just when I draw something on the chart:

  

   

  So, it's just weird. The code in this section is here:

     if(uidc.polyon) {
              polynomial_subtraction(curr_data, np, uidc.polyord, 0); // 0 Skip for now
          }
  
          // Scale the curr_data for gains, then pre-scale the FFT data
          // to have no change in the power spectrum (multiply by (2/np)
          for(j = 0; j < np; j++) {
              fft_data[j] = curr_data[j]*2/np;
              curr_data[j] = curr_data[j]*uidc.fgain[i] + uidc.foff[i];
          }
  
          uidc.fplotids[i] = PlotY(dc.fid, dc.fgraph, curr_data, np, VAL_DOUBLE, VAL_THIN_LINE, VAL_NO_POINT, VAL_SOLID, 1, uidc.fchans[i]?uidc.fcol[i]:VAL_TRANSPARENT);
  
          // Prepare the data.
          FFTEx(fft_data, np, npfft, NULL, FALSE, curr_fft);  // Do the fourier transform
  

  DC is a structure that I use to better organize some UI controls and uidc is for display RAM variables, then dc.fid is the Panel that is embedded in the tab "FID", dc.fgraph = FID_Graph and corresponds to the chart control. Control of the ring is actually in a child Panel, dc.cloc [0]. FID_Graph has a point, it can produce, but the reminder is empty (no not coded something there yet).

  I have also considered that perhaps something in another thread (I don't think there is, but whatever) I see is the cause, however, this behavior still happens on that line. I tried to break in different locations, on hold, then continues, as well by adding a loop containing Delay (0.01), a loop of 100 times. Always happens after the conspiracy.

  Does anyone have any idea why this might be happening?

  Hi Paul,.

  I don't have a solution, but I wanted to point out that, even if you see the ring to change its value only when you call the function of tracing, that doesn't say what this function call that really changes the value of the ring. In CVI, some drawing operations are batched, for performance reasons, and the Panel updates only visually at certain times. One of those moments when you draw a chart data. Yes, the ring changes visually at this time there, but it is probably just 'catch up' a change earlier.

  As you are looking through the code, when the value of the ring, you can use the term > command update UI to force the update panel, so that you don't have to wait for the tracing function and see if all goes well this change happening earlier.

  Luis

• Bar space/goes/to/Eve/problem/in / / / Control Panel

  Is it you like/help/me/to/figure/out/what/to/check/or/uncheck/in/performance & maitence.

  There is an old thread here relatively long--> http://www.computing.net/answers/windows-xp/spacebar-doesn ' t-work/174339.html

  The cause of the problem has not been found, but the symptoms went away with a new keyboard.  I saw several other complaints about your problem, and the only successful suggestion was a new keyboard.

  You have a laptop or a desktop/Tower computer?

  Your keyboard connects wirelessly (1) USB (2) or (3) PS/2 (round plug)?

  Your keyboard has a specific button that is supposed to go into sleep/standby/Hibernate?

  XP? Vista? What Service Pack?  (right click on my computer > properties)

• Store Windows not opening due to problems of control network

  Separated from this thread.

  my windows do not store the opening because of chek network problems

  Hi Alex,

  Thanks for posting your query in Microsoft Community.

  I understand that Windows store does not open, and I'll be happy to answer your query. Let me ask you;

  • Have you tried the suggestions in the original thread?
  • What are the results of each step that you tried?
  • What is the exact error message that you receive to the network?
  • What security software is installed on the computer?

  There could be several reasons for this cause and diagnose the problem, try the advice given above in this thread and let us know the result of each so that we can continue to research the issue and help you accordingly.

  Also, try disabling the security software installed in the computer and check.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Problem with control of bug 0xC5: DRIVER_CORRUPTED_EXPOOL on the virtual machine (Windows Server 2012 R2) - TDI vShield Manager error on vnetflt.sys

  Hello guys, I'm having this problem:

  KB.VMware.com/selfservice/microsites/Search.do?Language=en_US & cmd = displayKC & externalId = 2081616

  The thing is that my ESXi hosts run 5.1 Patch Update 3 7 and this says KB updated to 5.1 Patch Update 2 6.

  No idea what to do?

  Thank you

  I just reinstalled the VMware tools without the vnetflt.sys driver and the problem resolved.

• Problem of control of the Dev 2.1.63.73 SQL syntax

  Hi I just wanted to point out that the syntax checker systematically mark the valid code as invalid (_with a red underline_ wave). Sometimes simply adding a space somewhere in the code going to disappear temporarily, but he inevitably returns.
  Some examples of code that exposes the problem:

  --Fill in any trailing partial months with default assignments.
   merge into my_calendar dst
   using (select t1.my_sequence
               , t1.shift_date+t2.rn shift_date
               , CASE
                   WHEN TO_CHAR(t1.shift_date + t2.rn, 'Dy') IN ('Sat', 'Sun')
                   THEN 'Off'
                   ELSE 'Day'
                 END shift
               , t1.location_key
               , 'Generated' assignment
            from (select my_sequence
                       , location_key
                       , max(shift_date) shift_date
                       , TRUNC(trunc(MAX(oc.s_date),'mm') + NUMTOYMINTERVAL(1, 'month'), 'mm') 
                         - MAX(shift_date) ddiff
                    from my_calendar
                   group by my_sequence, location_key
                  having max(shift_date) < to_date('1-jul-2010')
                  ) t1
            join (SELECT rownum rn
                    FROM my_calendar
                 ) t2
               on t2.rn < t1.ddiff) src
     on (src.my_sequence = dst.my_sequence and
         src.shift_date = dst.shift_date)
    when matched then
      update set dst.shift = case when src.assignment != 'Generated' then src.shift else dst.shift end
    when not matched then
      insert (dst.my_sequence, dst.shift_date, dst.shift, dst.location_key)
      values (src.my_sequence, src.shift_date, src.shift, src.location_key);

  This is a rather extreme example, but almost all SQL code while valid and works as expected is always marked as having invalid syntax.
  
  I hope that this will be resolved in the next version.

  It's always a problem with construction 6445