problem of hp6371 of ram!

Similar Questions

• Do you know that oxidation of RAM can cause youtube to playback problems? I just fixed my problems by cleaning my RAM sticks!

  I didn't like the new firefox 40 was the problem. To make it worse in chrome videos have been hanging out at all, but when I restarted my computer it could not restart correctly. I've seen this kind of problems with the RAM sticks before so I said to give it a try.
  The sticks were very hot and one of them showed signs of oxidation.
  I cleaned the with an eraser and now the computer works fine again.

  I have 4 GB ddr2 800 adata vitesta 4x1Go sticks.

  Good job. Play well.

• Problem of Extension of RAM with Satellite Pro 6050

  Hello

  I bought 2 RAM sodimm 512 MB kingston KVR266X64SC25/512.
  When I insert one of them with is a sodimm RAM (128 MB), the departure of SP6050 without problem, and the bios shows the amount of Ram is 640 MB (the 2 Ram sodimm is ok)

  But when I insert the two kingston sodimm Barrette, it do not start: there is no noise, there is no system, no configuration check.

  Thank you for your help

  Titi

  Hello

  He s strange because I checked the maximum memory that you can use and it s 1024MB. In this case, it should be possible to use 2x512MB.
  The unit uses DDR - Ram modules. This is a problem.

  I also checked these modules and the modules support has recommend:
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

• Satellite C660 - 21 c - problems with modules of RAM

  Hello

  I was considering upgrading my RAM for my C660 - 21 c from 4 GB to 8 GB. So I decided to leave my 4 GB of ram in the ram slot to see the name & type of latter. Once I did, I inserted it, however, now, when I press the power button, the laptop turns on for about 5 seconds then turns off.

  I checked the stick of ram in both slots and it s certainly equipped properly. Is could someone please tell me what is the problem? I got a stick of ram dead for some reason any or if I've done a few other serious effects for the machine, i.e. static destroying the ram or the whole machine?

  Could someone help troubleshoot the please my problem?

  Thank you

  Chris

  Have you unplugged the AC adapter / CC and removed the battery before you start playing with the memory modules?

• Satellite Pro L20: I have problems of havi upgrading RAM

  I have problems to upgrade Ram.
  Sat Pro L20

  I have 2 sticks of 1 GB each, I tried in each slot and they work, but not all. Speed and size are the same but not associated. (apparently shouldn't matter)
  I'm annoyed about it, I'm sure it worked before, when I got a 1 GB and an assembled 256 MB

  Hello

  the modules are completely identical? They come from the same manufacturer? If not, then your problem is solved and you should go to the store where you purchased this RAM and exchange for a compatible.
  Usually this phenomenon appeared in only two cases:

  1. the modules are identical but one of them is faulty and it is the reason why they start won´t when it is matched
  2. the modules are not identical or not, from the same manufacturer they also start won´t when it is matched

  That's it, my friend. Nothing more to say.

  Welcome them

• 2000-2b44DX HP: problems with memory usage Ram installed

  

  now that you see the problem, how can I solve this problem?

  (I want to use all 8.00 GB memory ram installed)

  It will use only 4 gigabytes, and it has 8 gigabytes installed. He recondises all 8 GB but only use half of it.

  Hi @thing1989,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  First of all, I ran the HP Support Assistant to facilitate updates of HP.

  I see your screenshot you have 8 GB of ram installed and it is recognized but only 3.49 is usable. It might be book a piece of video memory, but it usually isn't that much.

  It is possible that you have a bad RAM.  If you test each individually both work?

  Have you tried swapping ram slots?

  You can also try this step.

  Go to the admin. Tools-> System Configuration-> / Boot-> Adv. Boot Options and set memory Maximum 8192 instead of unselected.

  To say thank you for the reply, please click on the thumbs upwards the button below.

  If this should resolve your problem, please select solution provided to help other posters locate this information.

  Good luck!

• Latitude E5500 Intel GMA pixels problem after upgrade of RAM > 4 GB

  Hello, I use latitude e5500 with the following specifications:

  • Processor: intel core 2 duo
  • graphic: Intel GMA 4500 MHD
  • OS: Windows 7 SP1 64-bit
  • RAM: 6 GB (2 + 4) 800 MHz

  Recently I have upgraded RAM of 4 GB (2 + 2) 6 GB (2 + 4). They are of the same manufacturer, the two 800 MHz I checked the new memory with the Dell diagnostics - it's ok. After upgrade, I have a serious graphics - parts of my get pixelated screen problems. It is irregularly, with different applications ran - see the screenshot.

  I tried to uninstall the graphics driver - it's ok, but I'm not ;) mode 640 x 480 I have tried different drivers - no improvement. Also, I removed a 2 GB - it works very well with my new 4GBs

  

  Hello

  Yes, I solved the problem. I had to buy an another 4 GB from the same manufacturer with the same properties. With 4 GB + 4 GB, it works perfectly.

  Concerning

  Aleksander

• x 230-problem of recognition of ram

  Hello world

  First is what I ordered: x 230 Type: 23257R6

  X 230-1x4Go - 500 GB HDD - i53320 and some other features. The 230 x came to me with no OS because I already had a 64-bit Win7 Pro licence.

  I've done it is install a 128 GB SSD in mSata Slot and place another original Lenovo 4 GB Ram module in the second Ram Slot. First startup, BIOS recognized the 8 GB of Ram and SSD drive, so I was going to install Win7 on the SSD.

  Installed without any problems, so I took the lenovo network driver and installed the system update.

  So right now, I have all the drivers installed and the almost the entire system fully functional but look in the Configuration system Win7 it says: , 00 installed memory 8 GB (7.70 usable)

   

  
  I did the update to the BIOS, but the problem is always the same. I knew from my other PC, there was a "memory remapping" function in the BIOS settings, then the whole 8GB Ram could be used, but in my x 230 BIOS there are has no memory option. Can anyone give me a tip?

  Maybe someone can help me with this button "black"? It does nothing when I get up there, but I'd like to customize the button...

  And I don't have any experience with the TPM or Intel Anti theft safe. It would be helpful if someone can give me some clarification on its use in x 230.

  I might have sensitive data on my laptop, so encrypting hard drive would be nice, but I don't know if the TPM secure or anti-theft Intel may be useful for this.

  Thank you very much

  Best regards

  Christian

  --

  x 230, T61, T40p, T30

  This should answer your question: http://askubuntu.com/questions/137594/12-04-64bit-detects-7-7-gb-of-ram-out-of-8-gb

  The graphics card is your enemy.

• Problem with Audio and RAM Preview

  Hello

  I'm fairly new to After Effects, and I quickly fell on an Audio problem.
  OK, so I have a single pre composed sequence, and while in that order I can hear just fine video excerpts (press space), I can also listen to extracts Audio Only very well (by pressing (.) on the numeric pad keyboard) and I

  can also make a RAM with video and audio preview as well. But let's say that, when the RAM Preview load, and he started playing (video and audio, fine), let's say I want to pause the video in 10 seconds. I could do that just by pressing space, but then when I want to continue previewing RAM (by pressing 0, or by clicking on the icon), it is starts playing from the beginning and not from the position of my head from reading, when I stopped (which is 10 seconds).

  So my question is: how to take back the position of my head of reading RAM Preview?

  Keep in mind that I could continue the preview by pressing the SPACEBAR or (.) on the numeric keypad, but who would take just (in the first case), audio or video playback (in the second case).

  Thanks in advance.

  You have active current time in the Preview Panel?

• Tecra S3 - problems with the new ram in slot B

  Hello
  I have a new 2 GB of ram. When I put it in the slot A (location B is empty) it works perfectly. When I put my old ram (1 GB) in the slot B now and try to powerup, I hear beeps: 1 x long and short 4 x. The screen remains black. Do you know what it is?
  Thanks for your help!

  Hello

  The beeps mean that the POST (power on self-test) could not be passed correctly.

  Your dysfunctions of slit B or the laptop needs 2 modules of memory installed in two slots in order to use the also the second memory location.

  But my assumption is that your second slot may be defective.

  Welcome them

• HP probook 4320: problem to upgrade my ram on hpprobook 4320 s

  Hi guys

  I wanted to update my hp probook 4320 s stock 4 GB to and 8 GB of RAM... and has not accepted all 10600 DDR3 ram on the market... what I will do

  Help!

  Hello:

  Please read this related thread.  The notebook of the object has the same chipset as yours...

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551#M207994

• Problems with my T61 RAM

  I ordered the T61 with 2 GB of ram, when I get on September 19, there is only 1 GB of ram. I contacted sales and technical support team several times last week. My order number is 2D1NHP. Sales said they'd call me last Friday. But I have not received any call so far. Totally frustrated and exhausted.

  Anyone have any suggestions?

  I just got the memory. It is finally resolved.

• problem HP DVD RAM UJ892

  Product name : HP Pavilion dm4 Notebook PC (1204TU)

  OS : Windows 7 Ultimate 32 bit Service Pack 1

  Problem :

  HP DVD RAM UJ892

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• HP Diagnostics says: error code: BIOME-1. What is needed? Problem with RAM?

  My HP Pavillion wife has a problem, Windows Vista seems unable to repair. Diagnosis HP running I got the following error code on memory: BIOME-1, og videre: please contact HP support.

  Can someone tell me what this error code means. Is this a problem with the PC RAM?

  Thank you

  agerfugl

  It seems that your advice was helpful. The PC close more and after a little while it still works well.

  Thank you very much for your good and useful advice.

  Kind regards

  agerfugl

• Driver DVD-RAM on Satellite A110-149 problem

  I recently received my copy of Express Upgrade to Windows Vista and I installed it as described in the user guide.

  The first time Windows Vista ran normally and I had no problem with my DVD-RAM. But then, after having upgraded from windows it asked me to reboot. When I rebooted my computer Windows Vista does not recognize the DVD-RAM driver.

  I searched the Web from Toshiba site, this driver but I couldn't find it. I just find drivers Windows XP, which could not be installed.

  Do you have anyone had the same problem, or knows where I can get this driver?

  My laptop is a Satellite A110 - 149 (PSAB6E) and the DVD-RAM is a CARPET * a DVD-RAM UJ - 841S

  Hello

  usually, a DVD-RAM needs no driver, it must be recognized automatically. Have you ever tried to remove the drive in system properties and restart the system?

  Windows should install correctly after that. If this isn't the case, please make a comment.

  Welcome them