Problem of management of cases in BPM 11.1.1.7

Similar Questions

• HP Laserjet Pro M201dw: "then I explained the problem to management and they said not to buy all the HP printers more."

  Our two new printers Laserjet Pro M201dw are not recognized on the office network.   I have spent hours trying to understand this and posted questions on the forum Support HP, but without response. They became more disadvantages than thay are worth.  And that's enough.  Then I explained the problem to management and they said 'don't buy it not all HP printers more.'

  Thanks for the suggestions.

  I tried to BootP and disable ipv6 on a printer and at first, it worked (finally).  But then, after having unplugged and restarted, he returned to the ip address of connection no.

  So finally, I noticed and changed the setting of the link of "Automatic" to '100TX' speed full - and that seems to have solved the problem of intermittency.  I've converted and turn it back on, unplugged, etc., and it maintains the connection and ip address.

  Do not want to play with something that works, I can't say with certainty if the speed of one link would have solved the problem (probably not), but it seems that while your excellent suggestions finally established a network connection, the setting of explicit link speed was necessary to maintain the connection.

  Thanks for your help in this matter!

• I intalled Creative Suite 6 on my iMac and the serial number has been validated, but when I connect activate the software, it is suspended until I have the strength of smoke activation. No error message; I have no problem signing in the case.

  I installed Creative Suite 6 on my iMac (Yosemite) and the serial number has been validated, but when I try to connect to activate the software, it is suspended until I have force the activation of quit smoking. No error message; I have no problem signing in the case. Help?

  Hi Jdburton,

  Please check: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Concerning

  Megha Rawat

• Problem of management of power with the Satellite S2430-402

  Every time is start my laptop, I get a message saying "%1 is not a valid Win 32 application" under the heading "E-power", thus the Toshiba power management does not load. I tried to uninstall and reinstall the software from the cd, but it does not work, and I still get the message.

  The problems began after I installed a program called Ghost Surf 2005 and ran for the first time. Since then I uninstalled but still has problems. I am running Windows XP operating system.

  Can anyone help?

  Hi Dan,.

  It seems that the software corrupted a file which is responsible for the powermanagement! There is what we call common files and it can be replace a file, the installation of Ghost surf!

  You can try to solve it with the Windows XP system restore when you set a restore point! Back to a restore point that was resolved before installing the software!

  Hans Bye

• Windows Vista Home Premium - problem "task manager has been disabled by your administrator".

  Nice day

  I had problems with my task manager (I use the operating system "Windows Vista Home Premium"). Evertime I try to access the program, he returns with "task manager has been disabled by your administrator". I used different tools to remove malware and got rid of a lot of problems but still can not in Task Manager.

  I created a new user with administrator account and logged on it and had no problem until my 'Task Manager' program open, but when I went back to my origional administrator account the same problem occurred.

  Why can I get to "Task Manager" in my new account administrator and not the former?
  I still have malware in the old account or do I go into my registry and restore something?

  I am at a loss, and any help would be appreciated. I'm worried that I can always have some kind of malware that prevents me to access my task manager in my old account.

  Please give step by step instructions because I am not computer savvy computer even when it comes to fixing the problems of this kind.

  Thanks in advance.

  Hello

  What antivirus/antispyware/security products are in use and which have ALREADY been on your machine
  even if you have uninstalled them?

  Never put any Parental controls?

  Start - type in the search box-> COMMAND - find top - CLICK RIGHT to it - RUN AS ADMIN

  Copy and paste in the command prompt - press enter

  Tracking Add HKCU/v DisableTaskMgr /t REG_DWORD

  OR

  Start - type in the search box-> Regedit - find top - make a RIGHT CLIC top - RUN AS ADMIN

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion-Policies\ system

  Look in the right-hand panel and delete the value named DisableTaskMgr
  Right-click on it and delete

  Close Regedit
  Rob - bicycle - Mark Twain said it is good.

• Sony shows smart app problem call management

  Hi support them.

  I am facing a lot of problem with the management of the smartwatch smart sony calls, after the application is updated, its all just not showing call on the watch. Please let me what to do. Is there a process for formatting the smartwatch software, or any other process to make it work. Other features work correctly.

  I finally find a solution, I format my phone and it resolved the problem.

• Problem access Manager __Verisoft

  My labtop has a fingerprint reader. Once I reset my internet explore setting tools manu, my verisoft access manager (fingerprint) does not work.
  I tried to find a way to reset that, but I couldn't.
  Also, I uninstall the control panel verisoft Access Manager and reinstall it and yet once registered, but still does not work.
  Could you please help me to solve this problem.
  Thank you

  Hello

  Let us try downloading and installing the Verisoft Access manager from the link below.

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=ob-49006-1&cc=us&LC=en&DLC=en

  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. In the System Restore dialog box, click Next.
  4. In the list of restore points, click a restore point created at least a week before the current date, and then click Next.

     Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.

  5. Click Finish.
  6. The computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  If this does not work, I suggest you to contact the manufacturer of the computer.

  http://welcome.HP.com/country/us/en/support.html

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Problems with Manager.createPlayer)

  Hello

  I'm new in the world of development of BB... I'm doing a simple application that retrieves a file from a URL .wav and it plays, but the process is stuck on Manager.createPlayer (URL).

  I ran the application using the debugger and when it comes to this line he says 'source not found', here's a snippet of what I'm trying to do:

  public class MyPlayer implements PlayerListener, passable
  {

  Player;

  (I call this my main application thread and start it)

  {} public void start()
  Thread t = new Thread (this);
  t.Start ();
  }

  void run() {}
  try {}
                     
  String url = "http://java.sun.com/products/java-media/mma/media/test-wav.wav";

  Create an instance of player
               Player = Manager.createPlayer (url); (it gets stuck in this line and the IDE shows a source not found)
  player.addPlayerListener (this);

  make the player
  Player.Realize ();
  Player.prefetch ();
  Player.Start ();
  }
  {} catch (Throwable t)
  reset (); This is a method of myself
  }
  }

  }

  The funny thing is that I tried the same code with a MIDlet and it works well in Nokia and Sony Ericsson simulators, but Blackberry is locked. I'm missing something here?

  I use Eclipse IDE, BlackBerry JDE component Pack Version: 4.5.0.16 and the Simulator Curve BlackBerry 8300 that come with the JDE.

  I also tried the application in a BlackBerry Pearl Simulator, with the same results

  Any advice will be highly appreciated = (...)

  I found the solution, the problem was that my emulator had no access to the internet, when he tried to connect to the URL and get the .wav file it so never found the source.

  I downloaded Blackberry email and MDS services Simulator package, which allows the internet connection for the simulators, and it worked!

  I could connect to the URL and play the .wav

• Problem: Data Manager has stopped working

  "data manager has stopped working" it's the pop-up window that appears everytime I open my laptop. I always click on the solution on the net but nothing happens. How to stop or fix this problem. I use windows7.

  Hello

  1. What is the number of brand and model of the computer?

  2 have you made any changes to the computer before the show?

  3. have you installed Data Manager?

  Follow the mentioned methods:

  Method 1:

   

  Step 1: Check in safe mode

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If you are able to see the start icon, then executes the method 2.

   

  Step 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2: Uninstall and reinstall data manager if it is installed and check

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  I hope that the above information is useful!

• Configuration and management use cases

  Hello

  In my opinion, this tool provides the ability to examine those corresponding to results that must be validated and then, I think, it helps the end user, take action. My question is: what are the actions that the user could take?, more precisely the user can manage the fields of candidates corresponding to generate a gold record?

  In addition, I'm looking for resources/documentation to configure and use the management interface of the Disqualification case. I would like to know how to set up a process of Disqualification to trigger alerts on case management interface and assigning it to a user.

  Thanks in advance for any help,

  Kind regards

  Daniel

  Hi Daniel,.

  Direct manipulation of data is not currently possible in the implementation of case management. The only actions are:

  -Change the State

  -Add a comment

  -Add the attachment

  -Change the value of the extended attribute

  Kind regards

  Nick

• The problem in the #0187277767 case could resolve yet?

  The problem in the case #0187277767 been solve yet?

  Hi stepheng26424983,

  The problem has been reported as a bug & engineering team works as a priority to fix. We expect to fix in a week.

  You will be notified accordingly.

  Kind regards
  Nicos

• Network problems intermittent management with more than 1 works ESXi

  Hello

  I had problems since installation with our 2 x ESXi 5.5 nodes running on a Dell VRTX system.

  If I had to run 1 ESXi nodes on its own, it works perfectly, no problems what so ever, but as soon as I start the 2nd node they network for the management network connectivity problems.  However any virtual machine that you are running on them have no problem at all.

  The easiest way for me to check it comes to ping the management network and it will be on one of the nodes timeout, then it will randomly and knitting on this node but timeout on the other, they will never return a ping at the same time.

  
  If anyone has experienced this before? I fight to see if there is a problem with the installation on the ESXi hosts, the network Dell VRTX or our NetGear switch.

  I tried a lot of solutions and been through the different pages of VMware KB but can't seem to find something that suits him.

  The network Dell 8 physical ports are all in one LAG with 2 nodes added, I tried the distinct lag, but that made no difference, I am focusing now on if it is a parameter of VMware to see where that gets me.

  That's how the two nodes are configured.

  

  Solved!

  Finally, I spotted the problem, and VMware technical support fixed it for me.

  The MAC address of each management network was the same!, for some reason, the host of the 2nd got the MAC address of a NIC to host the premiere, don't know how its possible but VMware support restored all of the network settings from scratch and it picked up the correct MAC and works.

  Thank you all for your suggestions.

• problems to manage certain features of 5.0 language - enums and annotations - a custom doclet

  I am writing a brand new customized by using the JDK 1.7 doclet. These are the problems that I found so far:

  IsEnumConstant(), isAnnotationTypeElement(), isEnum(), and isAnnotationType() methods doc do not work. They always return false.

  PackageDoc enums() method always returns an empty array. Enums are included in the result of the allClasses() and ordinaryClasses() methods.

  ClassDoc enumConstants() method always returns an empty array. The constant enum are included in the result of the fields() method.

  PackageDoc annotationTypes() method always returns an empty array. Annotations are included in the result of the interfaces() method, so I could implement the following workaround solution:

  AnnotationTypeDoc annotationDoc;

  Interfaces [] ClassDoc = packageDoc.interfaces ();

  for (ClassDoc classDoc: interfaces) {}

  If (classDoc instanceof AnnotationTypeDoc) {}

  annotationDoc = classDoc (AnnotationTypeDoc);

  } else {}

  continue;

  }

  Process (annotationDoc);

  }

  Based on something I found in the "what's new in Java . doc 5.0 " page ( http://docs.oracle.com/javase/7/docs/technotes/guides/javadoc/whatsnew-1.5.0.html) I guess that even if I write it with JDK 1.7, my doclet works in a kind of pre - 5.0 compatibility mode. That's what I found in the "what's new in Javadoc 5.0" page: ".

  Incompatibilities with custom Doclets

  Custom Doclets written prior to 5.0 will have compatibility issues when running on the source files that use the new language features in 5.0. New language features: the Doclet API and standard doclet were revised in order to manage the new features in 5.0 language - generics, enums, varargs and annotations. To manage these features, custom doclets will also need to be revised. The Javadoc tool tries - wherever possible - to present the so-called "legacy" doclets with view on the program 1) continues to work with the source code of pre - 5.0, but 2) corresponds to their expectations for 5.0 source code. Thus, for example, the type arguments and type parameters are stripped of generic constructs, variables of type and generic types are replaced by their scrapings and ClassDoc.fields () returns one of the constants enum.

  Solved! It has been really work in pre - 5.0 compatibility mode. All I had to do to was to add the following method to my custom doclet:

  public static LanguageVersion languageVersion() {}

  Return LanguageVersion.JAVA_1_5;

  }

• Problem with managed server by pointing to a different JDK

  Hello

  My Adminserver is pointed to JDK 1.7 which is shown in the start, but my managed servers point to a different 1.6_43. We are running Java version mismatch problem while deploying our application created with jdk 1.7 on these managed servers. How can I change the version of my managed server?

  Thank you

  Sam

  Hi Sam,

  You usually only have to change it in two places.

  DOMAIN_HOME/bin/setDomainEnv.sh and MW_HOME/wlserver_12.1/common/bin/commEnv.sh

  See the examples below.

  If you are on Linux, you can address it quickly. For example:

  cd /u01/app/oracle/product/fmw
  find . -type f -exec sed -i "s/\/u01\/app\/oracle\/product\/jdk1.6.0_39/\/u01\/app\/oracle\/product\/java_current/g" {} \;
  

  It's a good idea to do a softlink to your installation of Java, so you will not have this problem in the future. If you are on Windows, you can use a symlink.

  Linux example:

  ln -s /u01/app/oracle/product/jdk1.7.0_25 /u01/app/oracle/product/java_current
  

  Example of Windows:

  mklink /d D:\oracle\product\java_current D:\oracle\product\jrockit-jdk1.6.0_26-R28.1.4-4.0.1
  

  setDomainEnv.sh

  /u01/app/oracle/domains/eksudv/bin/setDomainEnv.sh
  
  if [ "${JAVA_VENDOR}" = "Oracle" ] ; then
          JAVA_HOME="${BEA_JAVA_HOME}"
          export JAVA_HOME
  else
          if [ "${JAVA_VENDOR}" = "Sun" ] ; then
                  JAVA_HOME="${SUN_JAVA_HOME}"
                  export JAVA_HOME
          else
                  JAVA_VENDOR="Sun"
                  export JAVA_VENDOR
                  JAVA_HOME="/u01/app/oracle/product/java_current"
                  export JAVA_HOME
          fi
  fi
  

  commEnv.sh

  /u01/app/oracle/product/fmw/wlserver_12.1/common/bin/commEnv.sh
  
  # Reset JAVA_HOME, JAVA_VENDOR and PRODUCTION_MODE unless JAVA_HOME
  # and JAVA_VENDOR are pre-defined.
  if [ -z "${JAVA_HOME}" -o -z "${JAVA_VENDOR}" ]; then
    # Set up JAVA HOME
    JAVA_HOME="/u01/app/oracle/product/java_current"
    # Set up JAVA VENDOR, possible values are
    #Oracle, HP, IBM, Sun ...
    JAVA_VENDOR=Sun
    # PRODUCTION_MODE, default to the development mode
    PRODUCTION_MODE=""
  fi
  

  What about Peter

  http://theheat.dk

• find: problems with managed partners entities (associations 1-1)

  Hello
  
  Let's say we have this association:
  
  FCalendar <>- contest
  
  This association is bidirectional and one by one.
  
  In addition, imagine that the database already contains a contest with the id 'Comp111 '.
  
  I created:
  
  Model contest = new Competition ("Comp111");
  ....
  CAL FCalendar = new FCalendar("Cal111"); "Cal111" is the identifier of this calendar object.
  cal.setCompetition (comp);
  comp.setFCalendar (cal);
  
  EntityManager em = getEntityManager(); This album Gets an EntityManager correctly.
  
  em.getTransaction () .begin ();
  
  EM. Persist (FCalendar.class, cal);
  
  Here I cal as a managed entity. He points to the model of the unmanaged object.
  When validation occurs, the FCalendar DB table will add a line for this calendar
  with the value "Cal111" as a primary key and the 'Comp111' for the competition column
  (i.e., the foreign key of the competition associated with cal will refer to the "Comp111" competition
  Since the DB contains a contest with the same id as cal.getCompetition ())
  
  FCalendar caldb = em.find (FCalendar.class, cal.getFCalendarId ());
  
  Now I get a managed entity caldb pointing MANAGED an OTHER ENTITY (let's call it "compdb") which
  a as the identifier "Comp111". This is the case, since the default recovery model is EAGER to associations 1-1.
  
  Contest compdb = caldb.getCompetition ();
  
  As I have explained, compdb is a managed entity.
  
  compdb.setFCalendar (caldb);
  
  In this way, I get the bidirectionnalite of the association. The competition management compdb now points to the caldb calendar.
  
  em.getTransaction () .commit ();
  
  The DB is synchronized. The contest of the comics with the id "Comp111" should point to the "Cal111" calendar and vice versa.
  
  However, this is not the case. I get a competition since the database with the id "Comp111", its associated calendar is null (as if I have not defined any calendar).
  
  What do miss me here? I would be very grateful if anyone can provide clues.
  
  (BTW, I did this test with JPA and toplink persistence provider)
  
  Joe
  
  Published by: user632543 on June 2, 2013 04:50
  
  Published by: user632543 on June 2, 2013 04:51

  Not quite what I wanted. When you call persist, you place the entity instance in the collection of the MA of managed entities. She's going to get synchronized with the database when the transaction is committed or empty.

  In your code:

  EM. Persist (CAL);
  FCalendar caldb = em.find (FCalendar.class, cal.getFCalendarId ());

  will result in cal == caldb. They are the same instance. Nothing to get in the database until the transaction either emptied or committed, so the referenced competition can be the instance empty just created instead of a reading from the database. It's a bad idea to create empty instances of objects that exist in the database when you use a find or getReference instead. And you must set the backpointer competing.

  Best regards
  Chris