Sony shows smart app problem call management

Similar Questions

• compatibility between Sony game store apps problem

  Hi everyone when I enter the store to play with my z2 Tablet I see this message that your device is not compatible with this version for the music and live on youtube apps, how do I update the apps or is there a solution for this problem

  PS: I know that I can update this apps download from another source, but I do not like this method

  Thanks for the answers and sorry for my bad English of screenshots there

  

  

  @omergh

  Contact your local care Xperia

  http://support.sonymobile.com/global-en/contactus/

• Call Manager 6.1 network problems

  I have a problem with my network drops continually calls phones or freezing.  Its States CM low features disabled.  We lose calls, phones are freezing intermittently.

  Here is the hardware configuration: MCS-7828-H3

  Platform Type 7828 3 H

  Series MX282400CM

  OS active 6.1.5.10000 - 10

  RTMT shows opt-out phones, but I don't see all devices lose connectivity with the exception of some packet losses minimal for call manager.  No other error not reported in to any device Cisco syslog for example, ping sent to all major network devices have 0 packets lost over the weekend, but 250 on 20 000 ping on the call Manager server is lost.  I replaced the cables, cords and moved from the ports of the switch with no resolution.

  CPU has never been higher than 24%

  Virtual memory never higher than 30%

  Active and Inactive partitions are 15% of disk space.

  We have a 2nd NETWORK adapter on the server, but I can't configure this 2nd NIC as a stand-alone connection for the call Manager server, than as a failover for 1 NIC.  Does anyone know how to configure this 2nd NIC to host all these servers IP services?  Is there a way to replace the NETWORK card on those servers (not on site and have yet to open this box upwards) or do I have to replace the entire server?

  Does anyone have any other suggestions on where to take my troubleshooting?

  Thanks for all the tips!

  Steve

  Please see below, your right in thinking this could be a faulty network card, cable, I suggest you also to search in your STP configuration.
  

  Error Message RTD-1-ADDR_FLAP [tanks] [dec] base10 relearning / min

  Explanation normally, MAC addresses are learned once on a port. Sometimes, when a switched network RECONFIGURES, due either manual or STP reconfiguration, addresses learned on a port are relearned on a different port.  However, if there is a port anywhere in the switched domain that is loop over itself, addresses will jump backwards between the real port and the port that is in the path to the rear port loop. In this message, [tanks] is the interface, and [dec] is the number of addresses being learned.

  Recommended action determine the actual path (port) to the MAC address. Use the ethernet controller of debugging command EXEC addr the privilege of seeing the other path-port on which the address is redisplays. Go to the switch that is connected to this port. Note that the show cdp neighbors command is useful to determine the following switch. Repeat this procedure until the port is found who receives what it transmits and remove this network port.

  Link to Error Message-RTD-1-LINK_FLAP [tanks] down/up [dec] times / min

  Explanation this message means that too many events from the bottom up link was noticed on this interface: [tanks] is the interface, and [dec] is the number of times that the link goes up and down. This could be the result of reconfiguring the port, or it might mean a faulty device at the other end of the connection.

  Recommended action if a person is to reconfigure the interface or device across the interface, ignore this message. However, if no one manipulates the interface or device at the other end of the interface, it is likely that the Ethernet transceiver at one end of the link is faulty and must be replaced.

• Strange problem with call manager and call before all

  Not sure whether this post about unity for or CCM. I will post on both. I have a main number customers dial in. When they call this number and they do not get a response, it passes to a call handler. This call handler has an option of entry of the appellant 3. If they hit option is three transfers to an IP phone on Call Manager who is assigned to the CFA for this cell phone to people. Everything works except when the call is sent to the PSTN it sounds for time and then disconnects. This number can be called directly from the system with no problem. The cause of the disconnection on debugging is the following: because I = 0x80FF - error of interconnection of networks; not specified. Please help if you can.

  I assume you are using version transfers here. You can give it a whirl with supervised transfers?

• Problems calling contextual AIRHelp to Adobe Flex App

  Hello world...

  I m of the problems, call the context-sesitive Flex AIRHelp.

  I can launch the help of flex using the following (flex) code, but allways starts on the default theme.

  private void invocarAirHelp(tema:String):void {}
  var appID:String = 'pc1 ';
  var pubID:String = "8C47FDE4638CAF7F210634E52A5F8318D893A57C.1";
  var mgr:ProductManager = new Manager ("airappinstaller");
  Mgr.Launch ("-launch" + appID + "" + pubID);

  }

  the launch method can receive parameters after the publisherID, but I do not know the settings that I should give the method to start the AIRHelp on a specific topic.

  I tried to use the settings that the call was on the command line, e.g.:

  mgr.launch ("-launch" + appID + "" + pubID + "csh - mapnumber 12");

  but I get no results... with these settings using startup application doesn´t

  Someone has an idea to make this work?

  Thanks in advance, Sabin

  Hi Sabin,

  The only way to support launch AIR applications from the browser is air "browser API": http://livedocs.adobe.com/flex/3/html/help.html?content=distributing_apps_3.html#1035834

  The browser API uses the Manager and exposes the API of browser next level so that we are changing the implementation if necessary one day. The browser API will remain the same, even if the interactions by Manager (or something else) changes.

  The browser API (air.swf) has other features that make it the best way to launch applications. For example, it provides specific information which platforms support AIR and can therefore manage to install new applications and the execution itself.

  In addition, if the application is not installed then browser displays error API application flex, but it can't in the case of Manager.

  That said, you can probably use "-" to separate the arguments for airappinstaller of the arguments that should be passed through the application itself.

  Mgr.Launch ("-launch" + appID + "" + pubID + "- mapnumber csh - 12");

  Praful - Jean

• applock and smart app lock does not work on 5.1.1

  Hello. I just upgraded to 5.1.1

  But applock and smart app lock does not work more that is very important to me.

  Who else has experienced the same problem? If you know a solution, let me know pleasr. Thank you

  @avacs

  It's a new update, application developers must check and fix this compatibility problems, not Sony. If the application has been developed by Sony, Sony should fix the problem.

• intelligent call management bug

  Hi sony support

  Intelligent call management is great, but there are a few bugs

  first: the jerk of the function call requires more sensitivity

  Second: bring the phone to your ear function needs to be improved because it works during calls! for example if you are in a call and someone called you the phone picking up just because it's close to your ear, put the first call you were waiting. (phone captures second call and put the first call on hold)

  Anyone who agrees... .write a comment

  MWM says:

  @SajjanXperia

  uliwooly

  I think you misspoke... I don't want the phone to answer calls while I'm already have one!

  You can turn off your call waiting in the additional settings, and your company should be able to disable, or you - if you have a control panel to the user through the administration of the carrier's Web site

  There is also a second option

  You can configure forwarding functions when "the number is busy' to your voicemail or another number if you need.

  Settings > device

  Call > other call settings
  Call forwading & additional parameters.

  Two of them are options at the end of the page

• intelligent call management

  Hello

  I have a control smart baclight problem and smart calling manipulation works don't no how I can fix?

  smartk backlight works from time to time, depending on how visible is your face, as it won't work all times in areas of night dark or wearing, also after it loses your face it will be off dimm, no matter if we wait once again the unit... One thing to fix and be more precise by the software, not yet tried the automatic response feature.

• Review installed licenses V4.3 cisco call manager

  Hello!

  I have and old cisco call manager V4.3 and I need to review with the licences it has installed, did someone knows how can I get this information from this version? I checked under license of the system, but nothing is there.

  Thanks in advance!

  Kind regards

  There are no licenses installed on versions of windows, you can not get any info from the server. You should review the licenses of the size of the paper.

  Sent by Cisco Support technique iPad App

• Install experience with CSA 4.01 & Call Manager

  Someone at - he had luck get the Callmanager XML policy file and use with CSA agent install?

  I was not able to find the custom policy referenced in the doc, they was curious to know if anyone has installed the CSA on a Callmanager sever and what results have been.

  Thank you

  Here is the link to get the custom policy. I installed CSA on Call Manager several months ago. no problem so far.

  http://www.Cisco.com/cgi-bin/tablebuild.pl/CMVA-3DES

  Please do not forget to rate answers

  Thank you

  Travis

• Call Manager Express ATA187 Firmware update

  Hello

  I recorded with Call Manager Express 9.0 to ATA187 but I have a problem for outgoing calls using DTMF, I tried to put dtmf-relay into the pool of register of voice but without success, so I decided to update the firmware.

  the problem when you go to download page you will find a .zip to the file not as before managing the .zup file and the upgrade of the firmware for the express appeal not found in any document because there is no way to upgrade through phones analgo

  No idea how upgade using any way?

  Hi mrmhar1408,

  You must upgrade the ATA 187 for the latest firmware SIP (9.2.3) using this load file, ATA187.9 - 2-3 - 1.loads. It is in the zip file available on the download section of cisco.com to the ATA-187, the name of the zip file is cmterm - ata187.9 - 2-3 - 1.zip.

  The process of upgrading of the ATA and SIP phones 187 s in SIP via CME are listed here. The process is essentially the same for phones and ATAs.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cucme/Admin/Configuration/Guide/cmeinstl.html#wp1067416

  Note that you must also have the load the copied file first in memory flash TFTP server, that would be your router CME flash.

  HTH.

  Kind regards

  Stefano.

• Creative cloud program, does not show the "App" tab until I have to do?

  Creative cloud program, does not show the "App" tab until I have to do?

  There is only 'HOME' 'ASSETS' 'COMMUNITY' label in the CC program

  Follow the procedure below:

  Uninstall Adobe Creative Cloud.

  Using creative cloud | Uninstall the creative cloud desktop application

  Temporarily disable the firewall.

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Can't delete? Rename it to Adobe Creative Cloud trees.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then navigate to Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Step 4:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• Can I migrate a virtual computer to a new family of CPU? -Cisco Call Manager PUB/SUB

  I currently have 2 host VMware ESXi 4.1:

  1. Dell PER905 - running 16 x 2.39 GHz (core) CPU / Quad-Core AMD Opteron (tm) Processor 8378 (processor type)

  2 cisco UCS C260 M2 (BASE-2646) - running 20 x 2,393 GHz (core) CPU / Intel (R) Xeon (R) CPU E72870 (processor type)

  
  

  The main objective is to move 2 VM of the Dell host to the host of Cisco, the reason is because Cisco Support said that the virtual machine requires an Intel and not AMD they are currently.  I currently have a Publisher Cisco Call Manager and Call Manager subscriber residing on the host of Dell, they are constructed (non - OVF) on this machine some time ago.  We started to have problems with them and ultimately Cisco indicated above.

  
  

  A few questions come to mind, can someone please shed some light on them for me?

  1. can I migrate these 2 AMD to Intel VM, without her damage/destruction of the virtual machine?  What that is the answer may be, can you explain to me the why?  The answer to the migration of the CPU is dependent on the guest OS or what?  I ask because I did this successfully on a Windows Guest OS virtual machine, but I guess it is that Cisco makes me hesitate/question.

  2 would it not be better to each virtual machine rebuilt on the new host, rather than through migration for the purposes of the CPU?

  3. What is the recommended method to endorse these VM, before proceeding with the migration?  I'm not talking about save data in the call manager for reasons that I will perform a backup it first.  I ask more along the lines of - for the love of the virtual machine itself.

  1. can I migrate these 2 AMD to Intel VM, without her damage/destruction of the virtual machine?  What that is the answer may be, can you explain to me the why?  The answer to the migration of the CPU is dependent on the guest OS or what?  I ask because I did this successfully on a Windows Guest OS virtual machine, but I guess it is that Cisco makes me hesitate/question.

  You should be able to perform a cold migration. The concern is the guest operating system level.  The Cisco device is probably a Linux distro.  The distribution must use the AMD64 instruction set (Intel 64 compatible) and theoretically should migrate fine.  However, if the guest what OS was improved the AMD CPU instructions, he can expect these features when you restart.  We have at least a virtual computer in our environment that we need to stick to a certain family of Intel processor because the software license dig and binds to it, but this is the only scenario that I have met.

  2 would it not be better to each virtual machine rebuilt on the new host, rather than through migration for the purposes of the CPU?

  I feel better on the redeployment, but if the migration is successful and applications run stable, then you reaped just the benefits of virtualization.

  3. What is the recommended method to endorse these VM, before proceeding with the migration?  I'm not talking about save data in the call manager for reasons that I will perform a backup it first.  I ask more along the lines of - for the love of the virtual machine itself.

  You could do something as simple as the cloning of a copy.  Depending on how you are approved for vSphere, you can have the POS to back up your virtual machine.  You can also use a tool such as VMWare Converter or Veeam Backup and replication. Given the importance of these virtual machines, I would get at least 2 backups of different type.  You should be able to validate any backup with VMWare Workstation prior to migration.

• Treo 800 Call Log shows no incoming phone calls

  The function to call on my Treo 800 log shows that outgoing telephone calls.  Is it possible to see a list of recent incoming phone calls (calls not missed, but all incoming calls)?

  The call log can be filtered to show incoming only, only not coming out that you missed, or all calls. It is set using the Menu key while you view the call log. If your incoming calls are absent from all calls, it sounds as if there might be a softwere problem.

  Message is about: Treo 800w (Sprint)

• HI can I get help on downloading the app, so-called NBC he how to listen live the Olympics swimming

  Hi, tried to go on the the NBC application page, but it does not show the app to download on my MAC.

  tried to go to Apple store did not find NBC app it is

  Any help out there?

  They said that this was the way to disseminate the Olympic swimming events and I already missing a part

  A little help my friend?
  

  As far as I KNOW, the NBC sports app is only available for iDevices and Apple TV 4. There is no version for computers.