Problem on the graphic resolution

Hello

I installed Windows 10 PRO on merger 8.0.2, on an IMac 27 "Retina display, the system seems to work fine, but the resolution of the virtual machine is poor

and the Virtual Machine does not display when I select mode full-screen.

I tried to changhe settings of the monitor on the settings of the Virtual Machine Menu, but neither option seems to work.

In the menu of the monitor, there is a warning that this message:

in Italian

"L'accelerazione 3D line tools VMware su questa macchina virtuale di aggiornamento."

translation into English by me...

"the 3D accelerator requires an upgrade VMware Tools in this virtual machine"

My system info are:

iMac (retina 5K, 27 grips, fine 2014)

Punto material:

Model name: iMac

Modello Identificatore: iMac15, 1

Nome processore: Intel Core i7

Velocità processore: 4 GHz

Di processori number: 1

Total number of Core: 4

(By heart) L2 cache: 256 KB

L3 cache: 8 MB

Memory: 8 GB

AMD Radeon M295X R9:

Modello Chipset: AMD Radeon R9 M295X

Tipo: GPU

Bus: PCIe

Larghezza canale PCIe: x 16

VRAM (total): 4096 MB

Fornitore: ATI (0 x 1002)

Device ID: 0 x 6938

Line ID: 0x0000

ROMA line: 113-C773AA-731

Versione driver EFI: 01.00.731

Monitor:

iMac:

Tipo di monitor: LCD Retina

Risoluzione: Display Retina 5120 x 2880

Retina: If

Profondita pixel: CGSThirtyBitColor

Monitor the main: If

Duplicazione: Spento

Active: If

Integrated: If

I have a VM on an Imac 27 "nonRetina with Windows XP, and I have not had this kind of problem.

Any help would be appreciated.

Thank you

Stefano.

Hello

Did you install VMware Tools? The last screenshot looks like it has not been installed at all.

In the Virtual Machine in Fusion menu, select "Install VMware Tools" and if nothing happens, navigate to the DVD-rom of the virtual machine, and then select install VMware Tools (not if your Windows 10 is 64-bit, you must select setup64 instead)

Then follow the steps to install VMware Tools.

If the menu Virtual Machine in Fusion says 'Reinstall VMware Tools', then... do not select it as a uninstall/reinstall is much more reliable, to remedy this:

-Uninstall VMware tools from the control panel

-restart the guest operating system

-Install VMware Tools as described above

--

Wil

Tags: VMware

Similar Questions

  • Problems with the graphics card on Satellite Pro M10

    Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

    I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

    This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

    1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

    2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

    3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

    4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

    5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

    I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

    Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

    see you soon,
    Cozmo

    Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

    Hi Cozmo

    I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

    In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

    Sorry Cozmo but I do not see any other logical solution for you.

    Good luck!

  • Satellite A200 and Win7 - problem loading the graphics driver

    Hi guys I have a problem with my Satellite A200 (PSAF6A).
    I installed windows 7 just now, now half the time when I start the computer it displays a message on windows encounters a problem loading the graphics drivers and the resolution is terrible. When I restart immediately, most of the time, it loads fine - no message and a good resolution. I tried many driver reinstall but it is always the case.
    Someone knows what's the problem? Is this with windows 7, or do you think the graphics card can be on the road to extinction?

    Thanks for your help, a lot.
    -Chris

    Hello

    It was ok before installing windows 7? I don't think it's a hardware problem. Have you installed the driver for the Toshiba driver page?

  • Satellite M30 - problem with the graphics driver and Quicktime movies

    I just installed a 40 GB to 80 GB hard drive and installed all the drivers in the correct order, as indicated by toshiba. Everything works well except the used for Quicktime .mov files. All I get is audio but no image - other than a colorful blur screen!

    I think I've isolated the problem to the graphics driver. Whenever I turned off / uninstall the driver dedicated for the graphics card FX 5200 GP (version 4.6.44) Quicktime files work fine. It is only when I installed the dedicated driver problems occur!

    Can someone tell me why this might be?

    Hello

    Do you use the graphics driver from the Toshiba driver page?

    Try to use the QuickTime Alternative 1.77. In this version the codex QuickTime has been updated.
    This version uses these features:

    -Media Player Classic [version 6.4.9.0 + SVN build 2006-12-24]
    -Codecs QuickTime [version 7.1.3.100]
    -QuickTime plugin for Internet Explorer
    -QuickTime plugin for Opera/Mozilla/Netscape
    -Extra plugins for QuickTime
    -QuickTime DirectShow parser
    -Wrapper DirectShow QuickTime decoder
    -CoreAVC 0.0.0.4
    -CoreAAC 1.2.0.575

    check it out...

  • my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

    computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

    To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
    Help would be much appreciated?

    Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

    Thanks for the effort though...
  • Having a problem with the graphic quality of vector graphics in flashswf in Dreamweaver

    Hello


    I have a flash slide show, I built for a dreamweaver site that contains images of vecctor who lose quality when I run my site on the domain. I tested the file flash in flash is superb. I saw in live mode view in dreamweaver graphics look smooth but when I load my files ftp on my account from the host and test from there, the quality of the edges of the vectors is not smooth. I see a lot of irregular contours and don't know why.


    I test everything on my monitor 24 inch so the graphics are probably enlarged but even when I test the flash in flash file and the html file from my hard drive to a browser such as firefox my graphics are smooth, so don't know if his problem-solving.  also tested my site on my laptop which is a smaller screen 15 inches and the graphics look bad on the website there too. F of course it's a problem of resolution, I think that screen 15-inch would be showing the graphics smoothly not serrated. ?????


    Anyone has any ideas or can you help me with this problem? I have


    Johanna

    Ok.  And just to add, you can natively import files HAVE on the Flash stage.  And I'm no Flash expert by any means, but there are a few settings, you can change.  In the document settings, you can change the framerate.  Usually 30 fps runs smoothly.  Then on the publication settings you can disable compression, increase the JPEG quality and enable hardware acceleration for computers running Flash 10.2 or later with the graphical features.

  • Satellite A660 - 1 HL-problems with the graphics card

    Hello!

    This is my first thread so I apologize if I am doing something wrong and for my bad English. :)

    Just bought a Toshiba Satellite A660 - 1 hl with two adapters, integrated and a GeForce GT 330 M. The integrated works well, but when I go to the dedicated I encounter problems. The non-adjustable resolution in optimal mode and windows in the operating system (windows 7) delays when moving. I can't get info on the map in all kinds of temperature programs or dxdiag and such others.

    I tried to install the drivers from nvidia, Toshiba and windows update with no improvement. I can't run Windows expreince index because I get an error message or of any average games do I encounter error messages there as well. I begin to doubt that the drivers installed even.

    I hope you guys can help out me :)

    It comes to getting the error messages:

    http://ImageShack.us/photo/my-images...krmklippe.jpg/

    http://ImageShack.us/photo/my-images...krmklipp2.jpg/

    http://ImageShack.us/photo/my-images...krmklipp3.jpg/

    http://ImageShack.us/photo/my-images/9/skrmklipp4.jpg/

    You should test the RAM (memory) for problems using the Test of memory of Microsoft or the www.memtest.org (bootable CD).

    To confirm that this is a hardware problem, you must save your documents and run recovery.

    If the problem still occur on a new image, then the laptop should go to an ASP (Toshiba Service Center) for repairs (possibly a motherboard replacement).

  • Problems with the graphics to Equium A60 driver

    Hello everyone,

    First sorry for my bad English.

    I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

    I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
    Could someone help me find a solution to my problem?
    Thank you very much

    Eurytheus

    Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

    Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

    Sorry, but I don't see another solution because the pilot is certainly tested and it should work.

  • Qosmio X 300-problem with the graphics driver

    Greetings,

    My X 300 has worked very well and I am using 186 drivers of Toshiba (Windows 7) and completely by the book. Now, my computer is start planting as much UNLESS I have uninstall the graphics drivers from Toshiba, because then it is stable. Sometimes the driver resets, the computer sometimes go to BSOD immediately (he does eventually in any case). Thus, for the moment, it has no driver installed, but driver VGA standard that comes with Windows 7.

    The question is what do I do? A X 300 without proper graphics drivers is a sports car with pedals.

    Any input would be much appreciated!

    Best regards
    Johan

    PS. the warranty has expired, so no free service.

    Hello

    Have you noticed the same problem on Vista preinstalled Toshiba version?

    At the moment, I can t imagine that the display driver itself is really the problem because pilots are pre-tested by Toshiba and I didn t has seen similar topics here in the forum about display driver not work. Maybe another program is causing this problem

    What you can do is to test the Qosmio X 500 display driver. There is a newer version. You should check this.

    By the way: since when did you notice this problem? I ask this question because a restore of the system to an earlier point could also be helpful

  • T400 own install problem for the graphics card hybrid

    I did a clean install on the T400 and installed all the drivers that are essential under the SWTools folder, but I see a problem with the card ATI will not work correctly.

    After installation from the folder videos and restarted the laptop. There is a sign next to the 'ATI Mobility Radeon HD 3400 Series' in Device Manager

    Under device status, I see the following error message

    "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

    Has anyone seen this error? I tried to reinstall the driver again, but that does not solve the problem. Actually, the PowerManager now has trouble switching graphics, with the balloon message "system cannot activate graphics high-performance" close all 3D applications or video and disconnect the external screens. " Switch graphics processors. »

    Any suggestions on how to fix this?

    The model is 2764-CTO

    Just figured it out. This feature requires Vista SP1. Since my Vista disk is the original disc of RTM without SP1, this is why I came across this problem.

  • Problem with the graphics drivers in ThinkPad SL510

    Hello guys.

    I have a ThinkPad SL510 with Intel Pentium T4500 @ 2.3 GHz and 2 GB of RAM. It currently uses the Intel GMA 4500MHD graphics, which is very slow and even Counter Strike 1.6 has frame drops each time only and then. So I visited the page drivers for SL510 and there is a driver graphic AMD listed that will allow a card ATI Mobility in the laptop. But the problem is that I have download the package and it does nothing. It installs only certain ATI Catalyst etc. but none of the graphics drivers at all, my laptop always uses the base Windows XP ones.

    Any suggestions? I want to unlock the ATI card so its possible since its going to be better for the play of light.

    Thank you!

    It's the original of your SL510 config

    ThinkPad SL510 2847-BTG
    T4500(2.3GHz), 2 GB of RAM, HD 320 GB at 5400 RPM, LCD 15.6 in 1366 x 768, Intel HD graphics card, CD-RW/DVD-RW, Intel 802.11bgn wireless, Bluetooth, 1 Gb Ethernet, UltraNav, camera, 6 c Li-ion, Win7 Home Premium 32

    You have only Intel graphics, install drivers ATI will simply not work since you don't have any ATI hardware on your laptop.

  • Problems with the graphic driver for Elitebook 8460p

    Hello

    I m of the problems with the Elitebook 8460p driver display. The latest version (15.28.20.64.3347), published on 16 June 2014 have some problems on the laptop. When the laptop is running on battery screen suffers from flicker and damaged graphics, as you can see in this video:

    https://www.YouTube.com/watch?v=gQ1w0aOaF7A

    (you can see the flickering between 0:20-0:22)

    I contacted with support local hp and send me a COMPUTER technician, who has changed my motherboard and CPU, but nothing worked. I tried to contact with intel for support (the issue is present with drivers intel non - oem), but they are sending me to the OEM. I would like to have a real driver that works with the system (3347 is a driver of the year), is it possible?

    This isn´t of question at all in linux drivers, more change motherboard I totally ignore a hardware problem.

    I can provide feedback to any solution.

    Thank you!

    Another update:

    Found a solution to this thread (which I started) in the forums of intel:

    https://communities.Intel.com/thread/48327?start=0&TSTART=0

  • I'm having a problem with the screen resolution cannot be superior to 800 x 600 pixels

    All this began after I plug an i9 phone to my pc to load

    later, to this day, when I turned on my pc screen resolution would not stay how I put it

    He wants to just go to 800 x 600 pixels.

    I ran microsoft security scan it found and deleted a virus java exploit cve 2010-4452

    but still having trouble with the screen resolution

    If the problem occurred after you plugged into your phone. I suggest to perform a restore of the system automatically, put it on a date 2 days before you had the problem. If this isn't the case, you can check the video card driver:

    Start > run > devmgmt.msc
    Check your video card driver or see if there are any missing drivers
    If its lack, then update or install the driver of your video card.
    I hope this helps you! Good luck.
  • Problems with the graphics card

    Hey, so I spent recently to my laptop HP Pavilion of 15-n298sa of a windows 06:52 and she since has earned me an endless stream of problems, especially with my graphics card. As I am on break from uni I re-uploaded all my games on my computer and found that none of them bar those made before the middle of the 2000s, play for me and for all name them my graphics as being the problem - like solitaire spider fact etc. All have previously been playable, about a month ago, so I know that it shouldn't be a problem. I tried several times to install the graphics drivers (one-I can't remember their names - AMD would apparently install and that NVIDIA could not). When looking at the Info for the graphic drivers installed, "Standard VGA Graphics Adapter" that it's 2006 so I guess that AMD, it has not actually installed / was done wrongly. I was wondering if someone could help me?

    BTW, I'm a complete technophobe and total so if you have an idea of what to do, I would appreciate it if you could put it in other words, because I am a plonker when it comes of this.

    Hello:

    See if this graphics driver works.  Your computer laptop is only the graphics card Intel HD 4400 so don't expect too much of it.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24392

    Product sheet of your model...

    http://support.HP.com/us-en/document/c04102914

  • Huge problem with the graphics card. Help me pls!

    Unfortunately my pc is not guaranteed, so my last hope is here on the forum.

    I have Dell Inspiron 580

    Ok.So the problem was that I found myself not being able to open My Nvidia Control Panel to verify customization as one of my games was so bad. That's why I found that my disappeared from Nvidia and Intel HD Core i3 graphics took place.

    And yes my pc used to run with Nvidia I have proof: P

    I must say that for me (as a heavy gamer) was a great kick as Intel uses all my CPU and my games become so difficult to play.

    I have tried everything that I could to restore the return of Nvidia (except one: to reinstall windows) but not one chance :(

    Reinstalling the drivers did not help actually I don't even know the type of driver that I need because that Nvidia is not found.

    Any advice? It will go to normal if I reinstall windows?

    Thanks guys and sorry for my bad English :D

    Hi Georgina26,

    You use the graphics card onboard because your monitor is connected to the video port badly. Turn off the system, unplug the video cable and connect it to the video card into the PCIe slot.

    If you are not familiar with the snap of a monitor on the back of your computer, please let me know and I will give a link to some photos.

Maybe you are looking for