Problem re boot after updates.

Similar Questions

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Some problems of AppStore after update of the Sierra

  Hi, after update my Mac to Sierra, there are a few problems of the AppStore:

  1. The Pages app updated to v6 and numbers to v4, Keynote, but fails to Update v5 (iWork ' 09)
  2. I've been on the program of public beta for Sierra but have now updated to the release version, but the app store is still trying to download the last Beta of Sierra. I disconnected (e) into the beta program website
  3. The AppStore download iPhoto but the app shows the icon of the incompatible (white circle with bar diagonally) in the Application folder - how to uninstall it?
  4. Is does not work available on the AppStore - the previous Terminal command Debug menu for access to this

  Thank you

  Hello

  Safe Mode boot removes the system caches that can you help an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

• Problem with Safari, after update

  I use a MacBook Pro, OS X Yosemite, 10.10.5 - and after the last update, I have problems with Safari (version 9.1). Some Web pages I visit every day is more responsible (I get the message that the page needs to be recharged because she failed the first time, but this does not work then either). This problem started just after the last update. Does anyone else have this problem? What I have to go back to the previous version or can I fix this problem?

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Windows7 + linux mint double PC operated facing problem with windows after updating windows 7 to windows 10

  I was running the two operating system on my PC windows 7 and linux Mint. However, after update from windows 7 to windows 10 my PC can not be operated with windows. Rather when I select windows as my operating system at the start of my PC, it shows that the operating system is missing. But still I can run my PC Linus Mint. Now what should I do to recover my windows?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not use Windows 10 after upgrade to Windows 7.

  It may be possible that the upgrade to Windows 10 gets no success.

  I suggest you to read the thread by Andre Da Costa MVP community moderator replied on 15 June 2015 on the same question and check if that helps.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-upgrade-a-dual-boot-installation-of-Windows/d7ca80ce-96b0-4F0A-9A8E-4038ded592b2

  Note: Using the third-party links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that any problems resulting from the use of third party

  Part links can be resolved. By using the links to third party is at your own risk.

  You can also check:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/frequently-asked-questions-Windows-10/5c0b9368-a9e8-4238-B1E4-45f4b7ed2fb9

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Problems with scrolling after update

  IM currently using the BlueJ ide and after updating to the new system / update (macOS Sierra) there is significant lag / jitter when scrolling. This problem only occurs when you use the scrolling with two fingers with the touch pad. When I use a mouse / or click the scroll bar on the side, it seems to go well. Not sure if there is a problem with BlueJ or the new OS. Would be very interested for some suggestions on how to fix this very annoying problem. (Using a Macbook pro 13, 2015).

  Thanks a lot to all the answers

  The obvious question would be if you see the problem of scrolling in Mac OS standard applications such as Mail, Notes and Safari.

  If this isn't the case, it is likely BlueJ.

• HP laptop - 15-r150nm: problem with wifi after update realtek adapter

  Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

  (2) "a network cable is not plugged in correctly or may be broken.

  What should I do, I have only this laptop and internet wifi, write this work? Thank you!

  Hi @frane53nja,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

  Go to the nursery of the device

  Click the network tab to expand the list.

  Right-click on the wireless network adapter and select roll back driver.

  Repeat this process for all types of adapters listed.

  While on this screen please check this definition also.

  Right click on the wireless adapter and choose Properties.

  Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• Satellite A60: Problem of memory after update Bios V.1.9

  Hi all

  I've just updated my bios to version 1.9 last week. Previously, I've upgraded my RAM from 512 MB to 1.5 GB (P4 2.8 GHz., 40 GB HARD drive) and my phone worked perfectly with the old Bios and RAM. After the Bios Update to the new version, 1.9, my laptop does not accept the module of RAM upgrade, windows xp still shows the blue screen, and then restart.

  After upgrading RAM off, my laptop works again. I tried several ways to solve this problem as take the battery, then reinsert the RAM or even formatted my HARD drive and installed a new Windows XP, but it didn't work. So what can I do to make my laptop to accept the upgrade of RAM? How to solve this problem? For this reason I now intend to buy a new laptop, if the problem can not be solved since I simulate a program on this laptop, so it requires a lot of memory.

  Thank you very much in advance for your answer.

  [Edited by: admin]

  Hello

  I put t really know what is the problem with the new update of the BIOS. In my opinion, you should contact the after-sales Service of Toshiba partner in your country and explain to them the situation. If your new module memory is compatible with the unit you should tell you want to have the old version of the BIOS. As much I know as technicians for this.

  If they see that there is a problem with the BIOS update, I'm sure they will for free.

  Good luck!

• ENVY 7640 printer all-in-one: problem software printer after updating to Windows 10

  After updating Windows 10, my HP ENVY 7640 all-in-one printing software does not open.  A dialog box appears asking if I want to install a new program.  How can I get the software of the printer to open?

  Once you upgrade your computer to Windows 10, you upgrade your printer for Windows 10?

  Go here...

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-7600-e-all-in-one-printer-series/6617267/model/6617268

  Download and install the drivers and full software.

• problems with ftp after update of windows 7 and windows xp

  After updates windows 7 and windows xp (updated April 10, 2014) my computers give different errors with FTP, Explorer Windows and FileZilla transfer.
  In windows 7 is resolved by uninstalling the updates. In Xp, no.
  Any idea?

  See the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/this-FTP-site-cannot-be-viewed-in-Windows-Explorer/e699d41e-98ae-48c1-9231-d570d46c0f38

• Windows Vista fails to boot after updates combined with Mcafee instalation.

  The laptop is a 2007 medion mim2330 running 32 bit vista Basic.  He was protected by Bullguard, but it had expired and has been exceeded. A message appeared on the screen WARNING french that he had been infected by a virus - it does not look official and I am not sure that he clicked on the option to download solution - however the phone still worked. I had a Mcafee 3 user license and wanted to install it so I uninstalled bullguard and installed Mcafee process windows crashed and failed to WINDOWS START SCREEN appeared and I was unable to boot windown in any mode. I gave the phone to a knowledgeable friend who said it was a virus, but did not know that one - he said, it has been deleted, all hardware tests had been run and it was perfect. It has resized the partition of disk doing a great score including a remains a very small. He reloaded windows with avast antivirus and gave the laptop back to work. I wanted to use the Mcafee I had paid for, so I uninstalled avast and installed Mcafee. Everything went well and the laptop worked - however the mcafee warning sign came up saying scan in real time has been disabled - he turned back, but a few minutes it turned off again. I have contacted Mcafee used virtual tech then chatted in their eng who suspected a virus, a virus scanner from mcafee, rather than the laptop - it was very good. While the computer restarts windows laptop crashed and the WINDOWS FAILED to START SCREEN has appeared. I gave it back to my friend who reloaded windows and avast and widely used for a week. When we got it back avast had been removed and there was Windows Defender - didn't light alarm does not. We loaded on Mcafee and had plenty of updates (and hours) then tried windows live messenger telling to SP1 and SP2 are necessary. They were charged after an eternity using automatic updates of windows. After everything has been loaded on a final restart gave place WINDOWS failed to START screen and does not start in any mode. I thought it might be linked to the abduction of an antivirus and the installation of another, so I put in the original Windows restore disc in and formatted the large partition, then reloaded windows and all its drivers then went on updates auto and auto updates for 24 hours until what he said to date. Installed mcafee - no problem, then tried windows live essentials that required sp1 and SP2 - used auto updates to download SP1. When this is completed there were two messages from Mcafee saying restart the pc and the other problem Center and soln windows saying an upate problem was found to go online to find the solution, I checked windows update history and SP1 and all other updates were installed successfully, so I rebooted the laptop - at which point it crashed and WINDOWS has no PU START APPEARED to-it wont start in any mode. Suggestions as to the cause and or how to make the process of restoration in less time - much appreciated. We have a same laptop bought at the same time, running the same original software and Mcafee - never a single problem. Thank you very much

  Usually, this means that Windows could not load the packages of metadata for some devices on your computer. If you do not already have it, you can run chkdsk/r (there is a space between thek and /) to verify the integrity of your hard drive. Follow the steps below:

  1. reboot your computer

  2. immediately press theF8 key until you reach the Advanced Boot Options menu

  3. Select Safe Mode with command prompt.

  4. at the command prompt, typechkdsk/r

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OptiPlex 990 not PXE boot after update Bios A18

  After the update to A18 on multiple machines, I noticed that they all hang after address DHCP is affected and what would normally be the menu timer (if it was not all work in progress) or launch from the boot of automation.

  I also noticed when you update to the latest version on our Latitude E6420s so.  Returning to the A17 on the 990 and the 6420 corrects this problem.

  Is anyone else having this problem, and this Signals to Dell.  I tried to Google this but any how, I wrote the search I can't find anything with recent BIOS.

  Hello Irios103,

  It is difficult to determine what is causing the conflict with Bios version A18 and your systems. The improvements to the code may be the cause of problems on Cisco switches or oldest feature, such as the tree covering weight or the characteristic power of conservation.  You can also make sure the quick port is enabled.
  If you do not need specific to this version of Bios patches, it may be better to not use it.

  Improvements & fixes for version Watch:
  1 address system does not meet the keyboard intermittently.
  2. address UEFI OS fail boot with this disk number HARD password.
  3. questions of CCTK.
  4. improve the compatibility of PCI devices and USB devices.
  5 Update Microcode Intel SandyBridge processor.
  6 update Intel PXE ROM.

  I hope this helps.  Please let us know if you need further assistance or more information.
  ~ Maureen
  #iwork4dell

• Problems on iPad after updating iOS 10, departure lack & no ID of TOUCH!

  I use and iPad 2 and just put Air updated to iOS 10 a few moments ago. Two problems:

  (1) when I start my iPad, the screen displays the logo of apple for a good 3-4 minutes, then it goes to lock the screen massive lag!

  (2) my iPad does not recognize touch ID! I get an error indicating that Touch ID is not available on the iPad.

  On all the sleep button has slowed too since the update and the device shows a lot of lag. I have problems with the application of music on my iPhone after as the updat as it does not work.

  It's quite frustrating and if anyone can help me on my multiple problems that had to be great.

  Thank you.

  Hello, misbah.mk!

  Thank you for joining the communities Support from Apple! It seems that you are having problems with your iPad Air. I know how important it is that the iPad that air works correctly for you at any time. First of all, read this article with the steps to restart your iPad, iPhone or iPod touch.

  The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords to ready for the start of the iPad to the top.

  If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

  1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
  2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
  3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Vista not load/boot after update

  Hi all

  I use Windows Vista on a Dell Dimension.
  Last evening, vista automatically downloaded and installed new updates and probably it needed a reboot. somewhere in the middle of the night, windows tried to restart.
  Today morning that I wake up to find that my PC freezes in the first reboot stage where it scans the CD and hard drives. No matter how many times I reboot or how long I wait, it will not move from this page frozen and does not load vista and start.
  What is the cause of this problem and how can I solve it?
  Many thanks and thanks to anyone who can help me...
  ~ Amy

  Hi Amy_rocher

  (1) try last known configuration of God since the menu advanced boot options and 'disable automatic restart in the event of system failure', to start in the last known good configuration or 'disable automatic restart in the event of system failure', press the F8 key when the system is restarted.
  (2) try logging in 'safe mode', please see this link to start 'Safe mode '.
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx
  (3) If you were able to start in safe mode, try to clean boot because some third party software may be casuing the problem, try to clean boot, check out this link:
  http://support.Microsoft.com/kb/331796

  Answer once you follow these steps and let us know the status.

  Thank you
  Anthony

• Computer doesn't boot after updates

  I've updated currently and now my computer won't start, he wants to restore the previous time but even if I do this it always says the same thing when I restart. the update warned me that desktop may fail load and if he does. I don't know how to fix or if to get the problem... I thought that update makes it better! I use windows vista and everything was fine until the recent update... now what?

  Hi Stst_918,

  ·         What was the update that you tried to install?

  ·         What is the exact error message?

  ·         How have you tried to restore the computer?

  ·         You are able starting in safe mode?

  ·         Did you try a startup repair?

  Follow the steps mentioned below.

  Try a startup repair by booting from the Windows Vista DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  If restarting fails try a restore of the system to WinRe

   

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Once you are able to boot to the desktop successfully try to install the update manually and check

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

   

  Response with result