Problem reading SD cards with PC under Windows 7

Similar Questions

• Problems with games under Windows 7

  Someone knows a problem to start Freecell or Solitare under Windows 7? First of all, I fell into it when I bought a new computer (HP Pavilion Elite). When you play games the screen starts blinking annoying way when the mouse is turned on. I returned the computer at Best Buy and the Geek Squad confirmed my problem using their mouse and the monitor. They exchanged the computer for a computer to identicle who then developed similar problems. This was again confirmed by the Geek Squad. They exchanged this computer for an Asus CG series which now shows similar problems in slightly less (though still annoying). If these simple games wasn't buying intention, they revealed a problem that appears to me as being caused by Windows 7. I had years of experience with these games under Windows Vista with no problems at all.

  Hello
   
  I recommend you to update the display adapter drivers and see if it makes a difference. You must be logged on as administrator to perform these steps. 
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on uninstall the driver and follow the instructions.
   
  Restart the computer and let the computer install the generic drivers.
   
  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  If the problem persists then you need to download the latest drivers for card viedeo and install it successfully.
   
  To get the latest drivers, you must contact the manufacturer of your hardware.
   
  If you still experience the problem, then you can create a new user profile.
   
  Steps to create a new user account:
   
  Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  Click on create a new account.
  Type the name you want to assign to the user account, click an account type, and then click on create an account.
  Now search for the question.
   
  For your reference:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile 
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

  Oops... .the everything in the title... My apologies!

  Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

  Thank you very much

  Paul Winstone

  Hi Paul,.

  This article was created when users have faced problem with old drivers for AMD graphics card.

  Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

  Kind regards

  Claes

• Problem reading SD card after the mode reader 'sleep' Portege R500 SP1

  Hi all

  I still have the problem, that my new Portege R500 with Vista SP1 does nor react when reading / writing on a SD card. This only happens when the SD card is inserted and I wake the R500 from his sleep. All read or written in the SD card will lock the PC and the R500 must be turned off hard. I tried this with different SD cards with always the same result. The R500 was freshly installed from the recovery DVD and even installing from a DVD SP1 Microsoft at any time has the same exact behavior. All the drivers are up to date, Bios 1.60. I also tried to remove the entry in Device Manager and reinstalled.

  I found on the Microsoft site a patch, that describes exactly this issue: [http://support.microsoft.com/kb/936825 | http://support.microsoft.com/kb/936825]. But this patch cannot be installed under Vista SP1. Microsoft says that it is already included in the Vista SP1. But it still does not.

  Any other idea? Or what I have to live with it?

  Best regards
  Stefan

  Hello Stefan

  I can imagine that this problem is quite annoying for you, but otherwise, you can disconnect SD card when you have no more need. I can't imagine that it must be inserted at all times.

  I can imagine there are a few conflicts between the patches from Microsoft and Toshiba driver but such bugs should be fixed by some Toshiba updates or hotfixes Microsoft. What to say? I'm afraid at the moment that you must live with it.

  By the way: post please exactly the model of mobile number and give some info on the SDCard (capacity). Perhaps someone with the same model laptop and the same card can test and view the results.

• NOR-DAQ traditional (old) devices of measurement and automation explore 4.7 with LabView2010 under Windows 7.

  In measurement and Automation Explorer 4.7, with LabView2010 in Windows 7, peripheral OR-DAQ traditional (old) appears under devices and Interfaces and it allows me to create a chassis SCXI-1000, and she agrees "Reset for NOR-traditional DAQ.  However, it does not search the modules in the SCXI1000, and when I ask 'trial', he says 'Impossible to test the chassis at this time.'  The entrance of NOR-DAQmx devices for the SCXI-1000 chassis has no problem and detects the modules very well.  I need the Legacy DAQ to a popular former teaching tool that has no equivalent in NOR-DAQmx.

  Unfortunately, NEITHER-DQA traditional (old) for Windows Vista and 7 functions of the only driver on Windows 7 32-bit, as seen on the page of the driver at the end of paragraph 1 Solution. I recommend you move your program to DAQmx.

• Why can't read USA Today online with Firefox under Windows 7 SP1 13.0.1?

  Once I'm connected, I should see a graphical representation of the first page of the current issue of the journal. Now, this part of the window is empty.

  Unfortunately I can't access this page without a connection. If you right click on the empty box, you get a small context menu for Adobe Flash player? There was a few compatibility issues with Firefox and Flash 11.3. This article has more information and workarounds: 11.3 Flash does not load video in Firefox. Who help me?

• Synchronization problems Blackberry Bold 9700 with Bluetooth of Windows 7 drivers Sony Vaio SZ series

  I have recently upgraded to Windows 7 with a clean reinstall on my laptop Sony VAIO VGN-SZ470N. Full specifications can be seen here: http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&kw=vgn-sz470n/c&lp=8198552921665095013&productId=8198552921665095013#footNotes

  My goal: to sync my new Blackberry Bold 9700 wireless via bluetooth using the built-in radio. Many people have had problems with this and the forums are littered with solutions that have worked for others, but I'm having no luck.

  So-called: Device Manager software Blackberry won't recognize devices that are managed by Windows Native Bluetooth stack.

  What I did:

  Windows will automatically detect my bluetooth radio and installs the "Bluetooth USB Controller (ALPS/UGPZ6)" (hardware ID: USB\VID_044E & PID_300D & REV_1915, USB\VID_044E & PID_300D) driver. With this driver, I can go to the "add a device" with my phone in discovery mode, and the computer will not conclude it.

  If I go in ' control panel-> add devices ", the Add Device Wizard window will tell me it's looking two detectable Bluetooth devices found in the range. I went into control panel of-> see devices-> UGX (which resembles a bluetooth adapter bit) and there was no "bluetooth settings option when I would right click."

  After reading on the Blackberry forums that the BB only synchronizes with the Bluetooth of Windows stack, I updated my driver ALPS/UGPZ6 to "generic bluetooth adapter. The selection of this driver also installs driver for "Microsoft Bluetooth Enumerator. It also adds the bluetooth icon in the lower bar of good start near the time and date. I can now go to 'Add a device' and it will show my BB 9700. When I connect, matching Assistant is displayed on my phone and in windows. I enter a code on my blackberry and enter a code in the wizard windows. Both devices and then tell me that pairing has been successful. However, the two machines are.

  Once the BB is paired, tent windows install the drivers of the two newly discovered devices, then gives me an error and States that the drivers cannot be installed. It is said that it is impossible to install two drives, both devices are listed in the device as "Bluetooth Peripheral Device" Manager (Hardware ID BTHENUM\ {426c6163-6b42-6572-7279-44736b746f70} _LOCALMFG & 000D).

  In "devices and printers > Bluetooth' BB 9700 is now listed with a status of 'troubleshooting needs'." Although the devices are paired, the BB will ever show a status of connected, rather it will continue to just try to connect every two minutes or more. I can connect to my friends MacBook, but I have no idea how to test the fact that the connection works. I also noticed that in the screen 'Add features' phone bluetooth of my roommate. So, I looked for ways to resolve the missing drivers.

  I found three solutions supposed for the driver installation error which has not WORKED for me.

  (1) the first is to right click on the two strangers 'Bluetooth' devices in Device Manager and updated the driver in both cases to "RIM Virtual Serial V2". When you try to implement this solution, the status "needs Troubleshooting" will disappear, but blackberry Device Manager will not find the BB 9700 to add for bluetooth sync. Nothing else seems to change. Complete instructions for this solution have been listed here: http://supportforums.blackberry.com/t5/BlackBerry-Pearl-BlackBerry-8100/Need-Bluetooth-Peripheral-Device-driver-to-connect-to-8120/m-p/263541

  The other way, I tried to fix the driver error problem was to remove all the listed drivers and reinstall the generic Bluetooth USB controller and the enumerator. Then I went and downloaded the Windows Mobile Device Center Driver Upgrade. For the two unknown devices labeled "Bluetooth Peripheral Device", I chose the Bluetooth radio driver > Microsoft Corporation > peripheral support Windows Mobile.  Once again, the status in devices and printers troubleshooting message > Bluetooth devices disappear, but still the Blackberry device manager can't find the phone. I found the original steps for this here: http://www.computers.nepalesemap.com/index.php?topic=3.0

  (3) supposed to be the reason why the blackberry will not sync with the ALPS driver installation is because the windows bluetooth stack does recognize it not as compatible. So I uninstall the Bluetooth devices and blackberry. I restarted and the computer reinstalls the driver ALPS.

  I found a solution which says to edit the c:\windows\inf\bth.inf file and add the hardware ID that is listed in the device under the ALPS HardwareID driver manager. I have add the ID of the hardware to the list of devices, but the bluetooth enumerator installs ever, and I can't access the Bluetooth settings.

  Does anyone else have this problem? Can anyone help!

  
  

  Hi Cptnnemo,

  How do you close the computer, you have your Blackberry?  As with any Bluetooth, the device must be 3-4 FEET away from being discovered.  Please follow the instructions on the MSFT made, then try to keep your 3-4 feet away and try the discovery mode.

  Mithdraug

• How to read video clips with LabVIEW in Windows 7?

  I already had the opportunity to play a video clip of my LabVIEW program.  Now, with the same program in the two operating systems, Windows XP and Windows 7, both versions work, but the version of Windows 7 will not be saved.  Trying to save it, I get the following error message: "generic error of LabVIEW.  Cannot save VI... LabVIEW Save 3 error code: FP bunch. "A 2010 version with this problem sampling program is attached. Any help would be appreciated.

  Try this VI.

  It seems that you have a video ActiveX component is corrupted.

• Problems of graphics card with a6230n

  I have a HP a6230n. Running Vista Home premium.

  I recently bought a graphics Sapphire Radeon HD 4870. I have problems with the installation.

  The first thing I did was upgraded from food, which went well. Upgrade to a CoolerMaster 550w power supply. (GPU claims at least 500w)

  I deleted display Nvidia 6150 GPU on board, drivers uninstalled the Onboard card in Device Manager, and then stop and installled the 4870.

  To restart, I went into the bios and activated the card PCI-E X 16 slot, but I don't have any video of the new card. The only video I get just the VGA slot onboard. I tried to install the catalyst drivers, but after the restart as a guest by the catalyst program, I still have no video from the 4870. I tried several forums, and it seems I did everything correctly, but I am still getting video of the new card.

  I know that the card is properly installed and when I turn on the computer, the fan on the GPU, so it should work.

  I can't understand why I don't get video of the new card.

  Any help is greatly apprectiated.

  Yes. Both 6-pin power connectors are connected.

  I just took everything out and now feel slightly delayed.

  The card has not been inserted completely. I rebooted and BAM... new card successfully loaded.

  Thanks a lot for your fast reply though.

• Problem of access of the bios under windows 8

  Hello

  Since the update my pc windows 7 to 8, I have had problems with the BIOS I can access is no longer the bios by pressing f2 on my keyboard, I've been on people to sort for weeks to try to get this problem but I have anywhere below are a list of things I've tried
  1. communicate with my Packard bell manufacturing gave no progress if the question has been reassigned to tell me it was a software problem with windows
  2. I contacted a local technician who did not know what the problem was
  3. I contacted Microsoft answering service who told me that I should try to access BIOS through advanced, startup was missing why it worked several important things like
  The UEFI firmware settings and use a device (firmware settings is very important because it allows the pc to boot directly from the bios)
  4. I contacted Proton an independent company with experienced technicians, who suggested the same thing as Microsoft
  Thanks for any help in advance.
  James
   

  As you do not access the BIOS from Windows at all, not sure how this is a Microsoft issue.  The BIOS is what starts after the POST or Power On Self Test.  Then the BIOS takes over and from there it resets the Windows MBR to start.

  Therefore, hit F2 before you see anything to do with Windows, while F2 is the key used to access the BIOS Setup.  As soon as you see something to do with Windows, it is far along the boot process and you must try again.

• Problem connecting more of 20 computers under Windows 7 64-bit

  I just build a PC, Windows 7 Pro 64 bit and shared hard drive of about 25 computers he uses as a render farm.

  problem occurs when I try to connect more than 20 computers and as an error shows that it has reached its connection limit. Tried to change advance sharing users 20 to 30 but can not. Is there a way to get around this or is that windows 7 can not be supported more than 20 computers on a network?

  Thank you...

  I just build a PC, Windows 7 Pro 64 bit and shared hard drive of about 25 computers he uses as a render farm.

  problem occurs when I try to connect more than 20 computers and as an error shows that it has reached its connection limit. Tried to change advance sharing users 20 to 30 but can not. Is there a way to get around this or is that windows 7 can not be supported more than 20 computers on a network?

  Thank you...

  Windows 7 has a limit of 20 computers as described in the agreement (EULA).

  " Device connections. . "You can allow up to 20 other devices to access the software on the licensed computer to use file Services, Print Services, Internet Information Services and Internet and Telephony Services connection sharing only.

  http://www.microsoftstore.com/store/msusa/en_US/DisplayHelpEULAPage

• Problem reading SD card during and after the connected device?

  I have an application that reads a file from the SD card when it is opened. Everything works fine until I plug the phone into my cradle/charger/USB. If I try to launch my app during the charge, the SD card is not reported to exist. I read that this may be a by-product of the USB mass storage Mode.

  Worse still, when I unplug the device, I still cannot read the SD card in my application and it is considered to be non-existent.

  What can I do about it? It is completely paralyze my app :/

  Thank you for your time and your answers!

  This has proved to be unrelated to the charge. I wasn't closing my InputStreams also I would get finally a FileIOException saying system resources.

• Can I remove IE8 and replace it with IE7 under Windows Vista?

  I want to do this is because IE8 is not compatible with IE8

  http://support.Microsoft.com/kb/957700

• Dragging a window to another cause of window, call a new drawing of the underlying window

  If I drag a window to another window, the window below Gets a refresh call. If the window below may only update a slow FPS, move a window across it is very choppy. The problem is even visible with two "fast" windows, for example two browser windows.

  I pasted in the NVIDIA system below information. Note that I have 2 GPUs, that she doesn't know if it's relevant or not, but we see this same problem at the office here on two machines, which have all two 2 GPU. The other machine has Windows 7 above.
  Information report by NVIDIA system created the: 08/08/2012 11:40:06

  Name of the system: FOEIJORD-SVG

  [Display]

  Operating system: Windows Vista (TM) Enterprise, 64-bit (Service Pack 2)

  DirectX version: 11.0

  Processor GPU: Quadro 5000

  Driver version: 297.03

  DirectX support: 11

  CUDA cores: 352

  Base clock: 513 MHz

  Shader clock: 1026 MHz

  Memory clock: 1500 MHz (3000 MHz data rate)

  Memory interface: 320-bit

  Total available graphics memory: 26878 MB

  Dedicated video memory: 2560 MB GDDR5

  Video memory: 0 MB

  Shared system memory: 24318 MB

  Video BIOS version: 70.00.30.00.0A

  IRQ: 0

  Bus: PCI Express x 16

  Error Correction Code (ECC): Av

  Processor GPU: Quadro FX 3800

  Driver version: 297.03

  DirectX support: 10

  CUDA cores: 192

  Base clock: 600 MHz

  Shader clock: 1204 MHz

  Memory clock: 800 MHz (1600 MHz data rate)

  Memory interface: 256 bit

  Total available graphics memory: 4607 MB

  Dedicated video memory: 1024 MB GDDR3

  Video memory: 0 MB

  Shared system memory: 3583 MB

  Video BIOS version: 62.00.66.00.02

  IRQ: 0

  Bus: PCI Express x 16 Gen2

  [Components]

  nvui.dll 8.17.12.9703 component of user experience NVIDIA driver

  nvxdsync.exe 8.17.12.9703 component of user experience NVIDIA driver

  nvxdplcy.dll 8.17.12.9703 component of user experience NVIDIA driver

  nvxdbat.dll 8.17.12.9703 component of user experience NVIDIA driver

  nvxdapix.dll 8.17.12.9703 component of user experience NVIDIA driver

  NVCPL. DLL component of user experience NVIDIA driver 8.17.12.9703

  nvCplUIR.dll 4.3.980.0 NVIDIA Control Panel

  nvCplUI.exe 4.3.980.0 NVIDIA Control Panel

  nvWSSR.dll 6.14.12.9703 NVIDIA Workstation Server

  nvWSS.dll 6.14.12.9703 NVIDIA Workstation Server

  nvViTvSR.dll 6.14.12.9703 NVIDIA video server

  nvViTvS.dll 6.14.12.9703 NVIDIA video server

  NVSTVIEW. EXE 7.17.12.9703 NVIDIA 3D Vision Photo Viewer

  NVSTTEST. EXE 7.17.12.9703 NVIDIA 3D Vision Test Application

  NVSTRES. DLL 7.17.12.9703 NVIDIA 3D Vision Module (0)

  nvDispSR.dll 6.14.12.9703 NVIDIA display server

  NVMCTRAY. DLL 8.17.12.9703 NVIDIA Media Center Library

  nvDispS.dll 6.14.12.9703 NVIDIA display server

  NVCUDA. DLL 8.17.12.9703 driver NVIDIA CUDA 4.2.1

  nvGameSR.dll 6.14.12.9703 NVIDIA 3D server settings

  nvGameS.dll 6.14.12.9703 NVIDIA 3D server settings

  Discovered what it was. I was running Windows Vista Basic instead of Aero color scheme. In basic, Windows probably only has a buffer for the entire screen, so when a window is moved, it overlaps any window must be redrawn. In Aero, each "buffer" of windows is cached to enable the gpu acceleration of the merger (for the transparent parts of the window). So in Aero, there is no underlying windows refresh subsequently drag another window across it.

• Tecra M1 - SD cards with greater than 1 GB capactiy?

  I have a Tecra M1, the SD card reader is limited to cards up to 1 GB of capacity.

  Y at - it a software update available to enable higher capacity cards to be recognized?

  Hey,.

  It is a feature limited material and there is no update driver or software to improve the card reader. If your card reader is only able to read 1 GB SD cards. Probably 2 GB works too, but 4 GB and above are SDHC cards and it won't work.

  Alternative using a card reader external that you can connect via the USB port. So it is possible to read the cards with a higher capacity. :)