Problem reassembling Pavilion dm4-2015dx

Okay, so I just bought both a front and rear bezel for my laptop since it broke out a few weeks ago and I just installed them alongside my old screen. I had finished the reassembly of the laptop (to my knowledge) except when I turned it on, it just made noise whirring as if it was about to turn on, beeps twice and then off. I also noticed a smell of burning from the monitor. So I disassembled it once again and noticed nothing extraordinary (again, to my knowledge). The only thing I can think of that could be the cause could be the fact that I use an old screen (which contains a cord for the coverage of the HP logo and the webcam, although the hood frame not backlight accompanying) in combination with a new front and rear bezel. Really, any suggestions would be helpful at this stage. I'm doing something wrong? Suggest you just buy a new LCD? Help.

What you ask, it is beyond the intended scope of the forum.

What you should have done, is to use the Insidemylaptop website and also watch videos on Youtube that show your laptop model disassembly\reassembly.

It is unfortunate that you don't have any experience before disassembling your laptop. This is why we suggest here in the forum and recommend that the service is done by someone who is experienced or certified for the repair of desktop computers and laptops.

If you have replaced the whole screen broke with an old, that may be a big mistake if it was not entirely compatible. Burning odors when one turns on a laptop is not a thing of God.

It is impossible for someone on your work on internet quality assurance. We are certainly an internet company connected but we have not advanced this far.

Tags: Notebooks

Similar Questions

  • Pavilion dm4 - 2015dx: HP pavilion dm4

    I went back to work and started to load my dm4. When I tried to wake up; the light rear screen and power led wifi led blink on and outside. The fan tried to enlist.

    diagnosis of charger: work

    diagnosis of the battery: charging

    only starting rope: failure

    hard reset: failure

    wut do?

    Here are some steps that you can go through

    1. remove all cables and devices, disconnect them and try to turn on the device

    2. check the LED light situation and ensure the action of the spring button / stop is normal

    Note: With No Power scenario there is no LED lights

    3 Exchange with a well known power cord and the AC adapter

    4 Pack no adapters are available, check if the power adaptor is slightly warm

    Note: This will give us an indication that the power adapter could be good

    5. do you know if the laptop was in battery or power adapter when you used the last time

    Note: Make sure that there is no spill of liquid or cutting

    6 perform a boot dry / Power Drain

    7. check if the Port of the AC adaptor is loose/broken

    8. If the laptop is not on even with a well known power adapter this confirms the failure with

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the white button on the right to say thank you Thumbs Up *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • Pavilion dm4-2015dx: the left speakers

    I'm not all the sounds of the internal left speaker on my laptop.  The two parties work in the headphone jack.  I replaced the internal speakers with new ones - does not solve the problem.  Then I replaced the motherboard - still does not solve the problem. Anything else I can try?

    I reinstalled the driver of the theaudio - no help.  When I tested each speaker in a stereo configuration, the two speakers worked fine.  When I played an mp3 of my music files, the problem still exists.  So I think 'it's maybe a software problem  BINGO!  I worked with Media player, so I switched to Groove and everything works as it is supposed to.  Media Player does not work well.  I wonder if anyone else has this problem and if there is a fix for the Media Player.

    Thanks fo your help in the elimination of many things possible.

  • Scrolling, pinch and zoom does not work in touchpad DM4-2015dx

    I did a clean install of Windows 7 Ultimate 64 - bit edition on my new laptop HP Pavilion DM4-2015dx from Best Buy. I was able to find the drivers for all devices except the touchpad. Currently, the touchpad functionality is limited to basic operations. I can't scroll, pinch zoom, etc. I tried the latest drivers of Synaptics Touchpad HP and Synaptics site without a bit of luck. The touchpad is simply recognized as generic "Standard Pointing Device."

    When I go into deivce prperties for the touchpad I see only the options for assignment of the buttons. There is no option to activate the rollers vertical or horizontal, pinch zoom, etc. Help, please!

    OK, so I found what the problem was. Initially, I assumed that the touchpad is a Synaptics touchpad. It is NOT the case. The touchpad is "Alps pointing device". The drivers installed with HP Pavilion DM4-2015dx out of the box are dated 18/02/2011 version 7.206.1717.117 as Alps pointing device. These particular drivers were not found on the HP website. However, there are similar drivers of 2010 that work very well. Here is a link:

    Alps Pointing - device Driver (2 channels)

    Without the right drivers you will also find expreince the cursor jump effect where the cursor will jump at random on the screen locations as you type. It has nothing to do with the user touching the touchpad. It's just that the generic touchpad Windows drivers are NOT compatible with the Alps touchpad.

    A final word for HP. PLEASE post all drivers for HP Pavilion DM4-2015dx on your Internet site, as well as ALL the HP utility.

  • HP Pavilion dm4-2165dx WiFi driver install problems

    Product:

    HP Pavilion dm4-2165dx

    OPERATING SYSTEM:

    Windows 7 Professional 64 bit VL

    Description of the problem:

    Impossible to install the WiFi driver. Tried all 3 drivers provided on the support site: Ralink, Realtek & Intel WiMAX. All 3 installers indicate either the WiFi card was not found / detected or the installation program just hangs.

    Changes to the system:

    A clean install of Windows 7 Professional 64 bit DVD VL - required to connect to our domain controller.

    Found a solution.

    (1) to restore the system to factory settings

    (2) save C:\SWSetup\Drivers file on a USB

    (3) install Windows 7 Pro 64-bit

    (4) copy C:\SWSetup\Drivers on HD

    (5) install device drivers

  • Need help with problems upgrade memory on Pavilion DM4

    I have a Pavilion DM4 1201us with original DDR3 2x2gb memory cards.

    I bought a pair of Corsair DDR3 1333 Mhz 4 GB memory cards.

    I have the latest BIOS (F.27) and I'm running the OEM Windows 7 Home Premium 64 - Bit. SP1.

    The BIOS recognizes the 8 Gb and when I run the BIOS memory test it runs without error.

    When I try to boot Win7, it gets somewhere before the logon screen and makes a BSOD with a message about a new memory being installed.

    I went back the Corsair Memory cards, but you need to know if there is a problem with any upgrade up to 8 GB of memory with my particular setup. HP offers an upgrade to 8 GB with the same spec boards. (I'm beyond the warranty period!)

    Any thoughtts?

    Interesting!

    I can tell you that the model only supports 8 GB memory: http://support.hp.com/us-en/document/c02704310

    Have you tried more than one kit of 8 GB?

    The reason why I ask is with memory DDR sometimes reticular sticks will pass all the tests if the two sticks are installed then a stick could be bad without you knowledge.

    Also you tried a bar of 4 GB and a 2 GB stick to see how it worked?

  • Problem with the BIOS of the Pavilion dm4-3002sa bought in Belgium

    5 months ago I bought a Pavilion dm4-3002sa (English version) in Belgium, where I live (to have a QWERTY, AZERTY keyboard like most laptops sold in Belgium). I discover now that this particular model is not recognized on the Belgian support HP web site - I could only find it on the web pages of HP UK.

    A month ago I started having repeated problems (automatic stop & restart every 3-5 minutes), which indicates there is a serious problem with my BIOS. The test of memory fails.

    I contacted HP support Belgian and send the laptop for repair (they said that they will replace the current memory).

    HOWEVER, I have another question: If the problem is caused by an incompatibility possible download relative to the BIOS here in Belgium, while my HP laptop is clearly a UK version and not recognized as a model sold in Belgium?

    If so, this means I can continue to have the same problem even after service.

    Registration of the laptop as based in the United Kingdom would be a solution? (i.e. regardless of my address of residence...) So that the updates & downloads are fully compatible with this model?

    A big thank you to the one who can help me!

    The problem of restart is much more likely to be associated, in view of the results of the test of the memory of the memory. You should have asked to send remembrance to you, rather than send the laptop away. Memory modules can be customer replaced. It is quite easy to do.

    The only real difference between having a QWERTY keypad and a QWERTY keyboard is the way the operating system sees the way in which the keyboard as being mapped when you choose the keyboard layout.

    Your computer laptop dm4-3002sa is still a laptop HP Pavilion Beats Edition entertainment as well as the USA (United States (version.

  • HP Pavilion dm4-1024tx Enterta: upgrade to 8 GB of memory and is blue screen problem

    Product: HP Pavilion dm4-1024tx Entertainment Notebook PC
    Product number: XC651PA
     
    I have corsair Vengeance ram 8 GB (CMSX8GX3M1A1600C10) that as a result of the configurations as mentioned below:
     
    SPD 9-9-9-24 latency
    SPD speed 1333 Mhz
    SPD voltage 1.5V
    PC3-12800 (1600 MHz) memo speed
    Tested latency 10-10-10-27
    Tested 1600 Mhz speed
    Tested voltage 1.5V
     
    It passes the test of memory BIOS.
     
    BIOS VERSION: Hewlett-Packard F.27, 21/12/2011
     
     
    But when I boot windows 7, it shows the windows symbol and then it shows the blue screen with the error
     
    STOP: 0X0000007E
     
    If I replace memory corsair with the memory that has been delivered with the laptop the system only works very well.
     
    Corsair memory is not compatible with the system?
     
    I have a dual boot and installed ubuntu on this subject. Ubuntu loads perfectly fine, but after a while the system restarts automatically (IE open application).
     
    I tried memorytest86 to test the memory, but the application continue to crash and reboot and does not provide any results.
     
    Help, please.

    The RAM is not compatible. The system allows a maximum total memory of 8 GB and uses DDR3-1333 which downclocks at 1066 speed. You cannot use a single module of 8 GB. 4 gigs is the large single module supports the system. I suspect the memory that you have will work fine if you had modules of 2 x 4 GB instead of a single module of 8 GB. That's why memtest is not finished. The controller memory motherboard is not able to take up 8 GB of RAM by a single channel.

  • Pavilion dm4-3050us startup problem

    My computer hp pavilion dm4-3050us entertainment PC laptop does not start...
    It shows CMOS RESET-502
    The CMOS checksum is invalid.

    The link I gave you is pretty simple forword.  Just follow the instructions.

    If you have a friend who knows a little more about computers ask them to help you consider otherwise at a repair shop.

  • Pavilion Dm4-3002TX beat Edition. Problem of recovery.

    I have Pavilion DM4 - Beat 3002TX Edition.

    I just download and install the demo of magic 8.0 norton partition of the site... and suddenly or accidentally eliminated my recovery partition. So I can't recover my system more or less disabled.

    so, how can we recover the partition recovery on my laptop?

    Thank you

    You can try to order the HP recovery media, which unfortunately, is the only option left if you want to factory reset the system & bring all ppartitions of the factory again:
    http://support.HP.com/us-en/document/bph07143

  • HP pavilion dm4-3099se: sometimes no sound when I pass

    I have a laptop HP Pavilion dm4-3099se beats edition. Sometimes when I turn on my laptop so no audio from any player. I changed the players but problem not solved. I reinstalled my audio drivers from hp website, but its still occurs. Please help me solve this problem

    Hello @emasadkkhan,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I read your post about the problem of audio and wanted to help you!  I understand that when you start the laptop sometimes, there is no sound.

    First of all, try to review the following document that is related to your operating system and let me know how it goes:

    HP laptops - no noise or sound distortion from speakers (Windows 10)

    Laptops HP - no sound from speakers (Windows 8)

    HP laptops - no sound from speakers (Windows 7)

    HP Notebook PC - error: No. Audio Device is installed (Windows 8, 7 and Vista)

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great weekend!

  • Replacement of the frame and hinges - HP Pavilion dm4 laptop

    I have a HP Pavilion dm4 laptop of 2.5 years. The first hinged on both sides broke that makes it harder for the laptop to close properly and now the frame is breaking apart. Is there a way I can get/buy replacements before other parts are screwed up.

    Thank you

    Yes, I also have this problem (dm4-1050ea).

    It all started on February 2015, when my aunt noticedv that my laptop was nt close properly.  It could be be made to do by pressing half upper (screen cut) to the front to the rear of the closure.

    The hinges then becomes deective that the screen don't would not SOUPLESE nd would not sit just to the place (angle) you open to.

    Following the hinges too stiff beame to exploit, came shortly after the left of the screen/lid and the window broke near the LH hinge (rather than though the bezel as shown in the image above). Then the right hinge broke off, then the screen become deective (mainly a band along the LHS - worked with detached hinges OK))

    So, I find myself with computer work, not 100% functional & broken and needs special care to use. the screen does not work in all areas (a replacement looks like £30-$50), with the virtually hanging screen, need to rplace lying hinges (£10-$15) and also nees any other bits (?) and the knowledge to fix it.  HP say they can't stand any more of this model and have no theparts (from end of 2015).

    It may be beyond the capacity of an almighty ccompany such as HP to find parts, but it does not seem beyond the my ability to get parts of - maybe-2nd hand - other HP broke! - But what I lak is kno detailed ho a skill to perform any repair.

    Videos-

    http://www.insidemylaptop.com/?s=DM4

    https://www.YouTube.com/watch?v=BphJmU5nHfA

    https://www.YouTube.com/watch?v=edxjwOXMglc

    I hope some find these useful - they're just a small selection of procedures available for repair (probably none authorized by HP that want you to throw in and buy a new model idir HP)

    Woodward

    1.March.2016

  • HP Pavilion dm4: graphics driver Intel & AMD causing Windows Crash

    Hello.

    My laptop is

    HP Pavilion dm4-3107tx Beats Edition Entertainment Notebook PC.   I tried to install the graphics drivers from this link:

    http://support.HP.com/ph-en/drivers/selfservice/HP-Pavilion-DM4-3100-beats-Edition-entertainment-not...

    but I could not install the graphics card intel. It is said that the cell does not meet the minimum requirements of the graphics driver.

    I also tried to install AMD and he did. But every time that I reboot, Windows startup crashes.

    I also noticed that results for starting blocked when I recently updated my Windows, including the update for the driver intel which I have not yet installed (because I know that once I did, I do a lot of recovery and repair of the system for the umpteenth time).

    And now I feel really stressed out about it because I've been formatted my laptop for the second time, and the last time it was with the release of the pilot intel. I was stuck again started back and I got really tired of him.

    I really need help with that.

    What I have to install ALL the drivers in the link before installing graphics drivers to ensure that graphics drivers will install?

    Hi @katrinahahaha,

    Thank you for your query.

    I understand that you have a problem installing your graphics drivers.  After formatting the drive and installation of the Intel graphics driver, you have a problem starting.  Did you use the Recovery Manager to format and reinstall Windows 7?

    You only need to install the driver AMD of the HP driver page because it contains the two pilots.  Please try this process:

    • Uninstall and remove two graphic drivers
    • Restart your laptop
    • Run the HP Support Assistant to help find and install the graphics drivers
    • You can also after the uninstall, remove the driver and restart, download and install just the driver AMD.

    HP Support Assistant

    If this problem persists, try removing both drivers and using the Recovery Manager to install the drivers:

    Computers HP - using Recovery Manager to restore the software and drivers (Windows 7)

    Please let me know the results.

    Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.

  • Pavilion dm4 touchpad

    I upgraded my Pavilion dm4 Entertainment notebook for Windows 10 and my touchpad has stopped working. All my settings are correct, and I checked to see if my touchpad driver was that it is up-to-date. I have no idea what to do. I have not had this problem before. It does not allow me to use it to scroll, highlight or click. All it will let me do is move the mouse and zoom in & out. It drives me crazy. Any suggestions?

    Hello

    Method 1.

    I suggest you completely uninstall the touchpad driver and reinstall.

    Follow these steps.

    • Press "Windows + X" and click on "Device Manager".

    • In the list of devices, you should see the drivers for the touchpad.

    • Right-click on the device and select "Uninstall".

    • In the dialog box uninstall, make sure that you select the option to remove the driver package from the system. This causes the installed driver package more soon to be deleted.

    • In the Device Manager Action menu, select ""find the hardware changes " option." This will cause the device driver to be reinstalled. Once the driver is installed, close all windows and restart the computer.

    Method 2.

    Moreover, if there are no updated drivers available on the Web site of the manufacturer of the computer, then don't download the latest drivers and try to install in compatibility mode of Windows 8. Compatibility mode runs the program using settings from a previous version of Windows.

    Follow these steps to install the drivers in compatibility mode and check if that helps.

    a. download the driver from the manufacturer's website.

    b. right-click on the driver configuration file and click on 'Properties'.

    c. click the "compatibility" tab and check the box ' run this program in compatibility mode for " and select the Windows 8 operating system from the menu drop down and proceed with the installation. Once this is done, restart the computer and check if the problem persists.

    Response with the State of the question and we will be happy to offer you our help.

  • Pavilion dm4 - sound read by headphones and speakers at the same time

    Pavilion dm4-3000tx

    Windows 7 (64-bit)

    computer speakers and play a sound with headphones when headphones are plugged in.no changes made to the audio settings or drivers.its a problem suddenly.

    a plug for microphone and speakers

    Thanks for the thread.i done all troubleshooting mentioned in various forums, but nothing has worked. the problem has been resolved by a simple reboot of windows.

Maybe you are looking for

  • I recently downloaded Firfox 4, which is constantly freezing up. What is going on, nothing has changed on my end.

    I am constantly "script does not" invite and even if I cancel the script, Firefox remains frozen/insensitive, and even if I try to restart it takes a lot of time! What happened to middle (gmail) emails, navigate to a web page on a business... to bad

  • Compact Daq or Rio measurement signal and datalog

    Hello I'm in a project to create a diagnostic for an offshore wind turbine generator system. So I have to choose a material acquisition and make the basic operations with the measured signals. The equipment has to work without being connected to a PC

  • Error 229789

    Hello I have a problem with the DAQmx Assistant failing out and back, an error Code - 229789. I am new to this programming, I have only used your program for a few weeks or. I bought a USB-6211 box to connect an analog only to produce a graph of prod

  • The Top tabs missing Task Manager

    Windows XP CTL-ATL-DEL shows a task manager without tabs at the top for a view of the process.  Neither the tab close or cancel on the bottom is no longer.  Don't know how or when it has changed since the old view.  Ask for help to restore the origin

  • LaserJet P4015x - cannot print on tray 3 of Linux (Ubuntu 12.04)

    I installed a LaserJet P4015x on Ubuntu connects via the JetDirect port (9100). Among the printing options, I can only choose these origins of paper: * By default-> Priints on bac2 * Photo tray-> Priints the Tray1 * High plateau-> Priints on bac2 * S