Problem restarting? HELP PLZ!

Similar Questions

• Lenovo Y510P problem restart, HELP!

  I need help as soon as possible please, because I may need to return it. It seems to restart and take longer tha usual, whenever it happens. This happens whenever I move the laptop, now just completely random. I want to fix this problem, because laptops are ment to be portable, and with that I can't move it easily puts. I have taken the battery can he cleaned up a bit, but the problem persists. I don't know what to do, or how to solve this problem. I went into the event logs (the handler for windows 8), and he said "Kernel-Power Error 41. I looked at the possible causes, and he says a shoratge of a King in the battery, a problem with the hard drive or a problem with the RAM. If you guys can help me with this problem I would appreciate it a LOT. Thank you!

  Boot into "Safe Mode" see if the problem persists.

  Your best off return either by sending to Lenovo for repairs.

• Same problem: (.) HELP PLZ!

  Hi ~ you're awesome! I have a HP dv9000 with XP MEDIA EDITION

  System disable code is: [10773]

  Any help is greatly appreciated! Thanks in advance, mushroom patch (deb)

  Hello

  Try this code.

  njgxj

• problem installing drivers for WinTV-PVR-150/500. rpet pilots are not digtally signed after installing drivers. HELP PLZ?

  rpet pilots are not digtally signed after installing drivers. HELP PLZ?

  See this

  http://www.SnapStream.com/download/hardware/PVR-500MCE-installation.asp

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Satellite P200-1JR: display becomes suddenly empty only restart helps.

  Hello

  I have laptop Toshiba P200-1JR, and I am satisfied with the performance.

  Unfortunately, I have experienced a few problems for which I'm not sure if they are material (manufacturing) or a driver problem (software).

  1 display sometimes (maybe once a week) becomes suddenly empty. Nothing special was did not previously, which should be the trigger. Just the time. Only restart helps.
  2 same as 1, but already show just goes crazy for a few second. A few lines aside (as the magnetic interruptions) are on the screen.

  I just downloaded a bunch of driver updates (have not applied the yet), but I want to ask is this already known issue?

  Best regards
  Vladimir Stefanovic

  > The screen started flashing uncontrolled for about 15 seconds, then it becomes totally blank.

  If the display driver and BIOS update help didn t I would recommend checking the laptop in ASP in your country
  Something like this may seem very strange, or it s a hardware problem

  Good luck

• I have xp sp3, and every time I start internet explorer 8, it opens closes again on his own why? HELP PLZ?

  I have xp sp3, and every time I start internet explorer 8, it opens closes again on his own why? HELP PLZ?

  See if this article solves your problem:

  "Internet Explorer opens, flashes and closes immediately when you start"
   <>http://support.Microsoft.com/kb/967896 >

  HTH,
  JW

• whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. What is the exact error message do you get?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2 :  If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3:

  Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• APPS DO NOT WORK! HELP PLZ

  Around Christmas, so I got a Windows 7 HP laptop, then I upgraded to windows 8. The applications were very good until the subject of may, they had a small "X" in the lower right corner, but I ignored it. Now when I click on the apps, they don't work and say that I have to re - install. So I install them again, and it does not work and displays an error code. HELP PLZ!

  From the desk of
  Press the Windows key + R
  Type WSReset.exe and press OK

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Method 3:

  
  You can try to run Apps Troubleshooter

  Download and run the troubleshooter modern UI App and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Please use the following links as reference:

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

• Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  is it because of power problems?

  Take it back to the Apple Store and ask them to check it out. It should be under warranty. Bring the MBP along too. It sounds like there might be a problem with it.

• 'BOOTMGR is missing Press ctrl alt delete to restart' HELP

  Recently I had to reformat my hard drive in my dell desktop case and put it in an external case plugged to my laptop running Win 7.  After saving all my files and all things somewhere else, I made a "format C:" and erased the disk now the hardrive is ironed in the DELL and when I put my XP disk in the cd drive and fire I get a "BOOTMGR is missing Press ctrl alt delete to restart' HELP

  Hello

  You try to install Windows XP on the computer?

  BootMGR is not part of Windows XP. This is the file of boot loader for Windows Vista and Windows 7.

  Method 1:

  If you try to install Windows XP, you can go ahead and try to reinstall Windows XP from the CD and check if that helps.

  http://support.Microsoft.com/kb/978307

  Note: perform a clean install only if you have no data on the hard drive.

  Method 2:

  See the article and check if that helps:

  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»

  http://support.Microsoft.com/kb/2622803

• Error: "Windows cannot open help and Support." "To solve the problem, see Help and support.

  Original title: help & support

  When you try to use help and Support on the start menu, a small window opens saying "Windows cannot open help and Support." To troubleshoot the problem, see Help and support. "It's double Dutch to me. Can someone help, please?

  Hi EdwardBahr,
   
  -Remember to make changes to the computer between the calendar when things worked fine and now?
   
  Try the steps listed in the following article and check, if it helps in fixing the issue:
   
  You cannot open the help and Support Center in Windows XP
  Cannot load help and Support Windows

• I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem. Help, please

  I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem.  Help, please

  1. Windows Mail.  But he argued that email account for more than a year without problem.

  2 here is the full error message:

  "Are subject: how pumpkin pies are made ', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, error number: 0x800CCC19.

  ("How pumpkin pies are doing it" the subject of an email I tried to answer to and it does not work)

  I get another message when sending email: "your POP2 server has not responded in 60 seconds.  You want to wait 60 seconds for the server to respond? »

  And I'm waiting for 60 seconds, several times and it does not send

  It was 1 year there, not more. Not sure when it started.
  Read this article from Microsoft Help Support &:

  http://support.Microsoft.com/default.aspx/KB/926374

  t-4-2

• We get an error "there was a problem, restart your PC. No changes"while trying to reinstall Windows 8

  * Original title: Windows 8 reinstall could not start

  Try reinstalling Windows 8 (x 64 OEM version), but after clicking on start, I get the following error:

  "There was a problem, restart your PC.  Has been no change. »

  Ditto for the Refresh tool.  Verification of the Solutions tool thinks for a minute, then disappears.  Have tried to introduce these tools after boot, as well as an assortment of other boards around the internet such as the cmd line queries.  Any thoughts?  Had the PC for a year now, no weird mods or alteration of configuration, just installed Office and a few games of limited resources.  As a single user, I have full administrator access.

  Hi Paul,.

  Thank you very much for taking the time to answer.

  The product key for Windows 8 on computers that are preloaded with are encrypted.

  For more information, see the suggestions provided by Andre Da Costa of the next thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-key-embedded-in-the-BIOS/ce42cbdb-914D-4346-93ed-a86a5a77aa9f

  I wish that you contact the Asus technical support and get the recovery disk to fix the problem more far.

  Please reply with the status.

• At work, my photoshop CS6 is printing so slow, it takes up to 1 minute to produce printing. We have a printer Canon Imagepress C700. What can be the problem? Help please, anyone!

  At work, my photoshop CS6 is printing so slow, it takes up to 1 minute to produce printing. We have a printer Canon Imagepress C700. What can be the problem? Help please, anyone!

  Tells us that the problem is in the printer itself or the printer driver - because Photoshop and InDesign do not share any code to print (they don't use even the same APIs to print).