Problem saving contour

Similar Questions

• Problem saving to the PDF/A format

  Hello

  I have problems saving my. PDF to PDF/A. My thesis deadline is in a few days, so quick help is appreciated.

  I use Mac Acrobat version 10.1.0

  When I export, I get this message:

  

  When I run the preflight, I get the following errors:

  

  The document has been exported from word to PDF, then edited in acrobat. It has been necessary to adapt the page numbering, since the word is impossible to work with.

  Please help, thanks!

  I had the same probems and solved it like this:

  • Option 1: Install the latest version of acrobat pro DC (that much improves the conversion of PDF/A-1). There is a trial version if you want to try first...
  • Possibility 2: If you're stuck with Acrobat X, try the following
    1. to export the file to Word using the 'Adobe PDF' printer and set the stanard to PDF/A-1b. This will provide you with a file conform to PDF/A-1.
    2. Make your changes in Acrobat (page numbering etc.)
    3. Use the preflight (convert to PDF/A-1) or you can try the File\Save as\PDF-A

  The two have worked for me...

• Problems saving pdf files.

  When I download files in the form of pdf files, they save as files in Notepad. Is there a way to fix this problem?

  Do you have a PDF Reader installed? If it isn't...
   
   
  Foxit Reader
  http://www.foxitsoftware.com/Secure_PDF_Reader/
   
   
  If you have a PDF Reader installed, create a file association.
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: Your PDF reader.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
   
  
   
   

• Problem saving blackBerry Smartphones address

  Hello this is my first post and experience with a Blackberry. I bought a 8310 and Rogers put the old SIM on my moterola inside phone. I noticed there were only 10 of my clients address on it that I discovered only on the registration of the sim card from recently ti. I thought time for a fresh start and deleted contacts and progressed to all my contacts with their addresses, telephone numbers, E-Mail addresses add inside. I asked the guy at Rogers how to save them, and he said you don't need to save just for a sim card, go back to the computer. I then progressed to enterall info. For more hours than I care to admit lol. THEN I started to have problems on the phone. Today I brought back and they gave me a new. Before I put the Software Desktop manager and saved, when I did a restore with the new Blackberry only 10 original customers were there. I called Rogers and they said to go in restoring to the ptogram file and click on desktop and on the backup file. On the left, it shows 129 files of addresses, but it's not black and grey so I can't transfer the info to the phone from the computer. Can I still get the old phone, but I have to retype this information again? It's a huge amount of double work. Please HELP lol!

  OK I just talked to Rogers and they said that the option where I'm stuck is not available on some models. They said I might be able get the old phone, drop th info in Outlook Express and then resume this phone and get my other phone and delete the info from Outlook to the phone! PHEW! Wish me good luck!

• Problems saving changes

  I tested InContext editing on a few pages of test without problems. Now I want to use it for a real site, I meet problems. I can access the page for editing (so it must be registered properly), but when I save it, it asks me to register the site with ftp information. If I do not complete this possibility, it creates a new site. This could be the cause?

  Hi weblinkstudio,

  Review the messages of 3rd and 4th detachment forum following where another user was experiencing similar behavior:

  http://www.Adobe.com/cfusion/webforums/Forum/MessageView.cfm?forumid=82&CATID=859&ThreadId = 1403382 & enterthread = y

  There are several reasons why this can happen - the domain name of the site you're trying to change (for example, http://www.example.com vs. http://example.com) or attempt to edit a page to a higher level when the site is saved to a subfolder (such as another experienced user). Please answer if the information in the post solves your problem.

  Best regards
  Corey

• Problems saving a DAQ task, in Labview and besides running

  I'm trying to use DAQmx Save Task.vi in LabView to save a generation of simple signal task, so I can open it later / elsewhere. However, the problem I have is when I try to open the task in MAX. The task is presented in MAX, but when I try to run the task 200552 it occurs to the DAQ Assistant.

  200552 error has occurred in the DAQ Assistant

  Possible reasons:

  Specified string is not valid, because it contains an invalid character.

  Invalid character position: 4
  Invalid string: Dev1/port0/$line0

  It seems that the problem has to do with the character ' / ', but I don't know how to create a line of output in LabView that does not include the character ' / '. Is it all the same around this problem in either LabView or Max?

  I have attached my LabView program. Thank you for your help and your patience.

  OK, I understand now.

  Wire something for the "assign name. It chokes on it.

• Problem saving PNG of the charger

  Well, I'm trying to save a png file I have loaded using charger of the internet.

  Here is the code:

  ...
  public var TempImage:BitmapData;
  ...
  var loader:Loader = new Loader();
  var url:String  = new String('http://myurl.com/image.png');
  ...LoadImage();
  function addLoader():void{
      addChild(loader);
  }
  function LoadImage():void {
      var urlReq:URLRequest = new URLRequest(url);
      loader.contentLoaderInfo.addEventListener(Event.COMPLETE, loader_complete);
      loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, loader_err);
      loader.load(urlReq);
      addLoader();
  }
  function loader_complete(evt:Event):void {
      var target_mc:Loader = evt.currentTarget.loader as Loader;
      var TempImage1:Bitmap = Bitmap(target_mc.content);
      TempImage = TempImage1.bitmapData;
      target_mc.x = (stWidth - stWidth) + 15;
      target_mc.y = (stHeight - 15) - 165;
  }...Button Code for Save button...
  function SAVE(e:Event):void{
      file = new FileReference();
          var SaveString:String =- new String('myImage.png');
      file.save(TempImage, SaveString);
      file.addEventListener(IOErrorEvent.IO_ERROR,saveError);
      file.addEventListener(Event.COMPLETE, Complete);
      file.addEventListener(Event.CANCEL, Complete);
  }...
  

  Image (loader) is added to the step successfully, the SaveString works fine, I have access to the system using "access_shared" files, record the quick works...

  The problem is that the recorded image (TempImage) contains no data, I tried countless variatioins to get the charger in a 'temp' image data, but without success.

  Any ideas?

  I found a solution based on my own earlier application code.

  I used PNGEncoder to encode the TempImage in the service RECORD before the real economy.

• Problem saving on paint program, a permissions error

  When I go to save a picture to paint all of a sudden a message keeps me savings and he says:

  "you are not allowed to save in this location. Contact the administrator for permission. »

  I am the administrator, the location is where I always save and I don't have any idea how to solve this

  The other day I tried to edition/re-sizing some pictures and he'd let me save on my SD card but not on my computer... someone knows something about this?

  In case I forgot to recommend this later when the discussion is in the details: -.

  After that you have solved your problems consider the creation of two new Admin accounts & change your user account on the day the day to account 'Standard user '. I did it only after seeing the problem reports in this forum such as malware vulnerabilities. I now simply log on to a user account & have strong passwords on accounts Admin [fact obstacle to anyone trying to install anything remotely].

  I was amazed by how it was easy to make the switch: -.

  1 I created two additional admin [both with strong passwords] accounts.

  2 I changed my original account [admin] in a user account - I entered netplwiz into Start & menu which have materialized.

  3 I put a password reset disk for each of the accounts [the instructions in the help system and in the Control panel, dialog boxes user accounts].

  4 I put my default user account [with bypassed password and therefore also convenient that my previous Setup - new netplwiz]

  Using the Windows system gives good advice on what makes a password strong. Just search for "strong password" in help.

• Problems saving in PDF format

  

  I am trying to record a brochure in PDF format.

  Essentially, when I export to PDF, these weird lines appear on the PDF document (shown in green on the top).

  However 100% in Photoshop, they are not visible (2 pictures below).

  I was wondering if anyone has had a similar problem / what am I doing wrong?

  Thanks a lot guys!

  

  

  Well, you have used transparency and belnding modes and such things must be correctly flattened in order to maintain its appearance and/or requires treatment appropriate overprinting in Acrobat. Merge layers manually, check the flattening settings in the PDF export presets and / or use the printing processing tools in Acrobat to rectify the issue and check what it will actually look like when printed.

  Mylenium

• Problem saving to the .tiff file

  Hello

  I have a photoshop file large where I worked on. I would like to save the file as a .jpg file and as a .tiff file to send a printer for a banner print shop. When I try to save the file in .tiff format and then open this file in a program other than Photoshop, part of a layer is missing. Backup to a .jpg file works fine. I flatten the image before the economy. What I am doing wrong?

  Thank you!

  Some software that sees an alpha channel may assume that you want to hide your picture. Try saving your TIFF without alpha channel.

• Problem saving and exporting of .idml

  I try to save a project of 20 MB in .imdl with CC InDesign, but the result is an archive of the imdl of 1 or 2 MB that does not work. (I tried "Save as" and export). Does anyone know what is the problem?

  It is expected that an IDML file will be smaller than its parent INDD file. number of bits extrinsic is ejected in the conversion process. (Things like previews of image, which will be recreated when the file is reopened with related files available).

  You say the IDML does not work; What wrong with it?

• problem saving my logo

  Please guys how can I save my work of illlustrator cc Flash drive or desktop?

  When I try, I still have it but I'll have to open the Illustrator 1 link

  PAPIN,

  When you save it as AI, you can open the file with Illy, or another application that can open files HAVE (some may open some older versions); If you check create a Compatible PDF file, you can also open the file with Acrobat or Reader.

  Otherwise, you will need to save and export to another format.

  Normally, the files are saved and exported in any formats to suit the application.

  What you see on the desktop is not a link to the application, but the file itself. When you double-click on it, the application is open because it is necessary to open the file. You can try right click and open with and choose Acrobat or Reader and see what happens (Win talk).

• VI 2.5 ESX 3.5, 1.5, Netbackup 6.5.1 - problem saving machines VCB virtual isolate a DMZ

  Guys I need your help...

  My VMware infrastructure looks like this...

  Virtual Center 2.5 works very well :)

  10 great works of ESX 3.5 servers :)

  VCB 1.5 works very well :)

  Veritas Netbackup 6.5.1 - I've specified the Virtual Center Server and VCB proxy server which is the same as the Netbackup server. Everything works beautifully... I can see all virtual machines when a backup strategy in cash and can I save all the VMs.

  Problem... I've added another ESX Server and created a new port of the virtual machine that is attached to a physical NETWORK adapter that is isolate/DMZ from the network.  I created a few VMs and placed on this isolated port virtual machine I need to back up regularly.

  My problem, I start creating a backup in Netbackup policy, I don't see the isolated virtual machines.  Everything I read on Netbackup, points using FULL domain name to back up virtual machines that are going to be.  Well these VMs are isolate and cannot be network connectivity ping/network where the center, Netbackup, proxy server Virtual server/VCB resident.  I've added these virtual machines to host (IP address and domain FULL name) file in the VCB proxy server and Virtual Center Server.  When I tried to create the backup strategy, I could see the virtual machines, but I get a policy has failed "political validation validation of the advanced client configuration controls has not." Advanced client backups can be made up to this as configured correctly."  Know me that Netbackup is trying to ensure that virtual machines are in the network and available and if Netbackup cannot see the virtual machines on the network it will give this error.

  My questions... Should NetBackup see the virtual machines by using the FULL domain name to perform backups?  NetBackup can perform backups of virtual machines that are isolated from the network? If it is possible, how?  How you guys are backups to isolated/DMZ VMs?

  Thank you and your help is very appreciated.

  Shin Gouki

  Off... first get on NBU 6.5.3 I am surprised you have consistent backups with 6.5.1...

  You will need to create a bpstart_notify_script and bpend_notify_script to take care of these virtual machines using moref. Take a look at this doc->http://viops.vmware.com/home/docs/DOC-1392 also, I discussed NBU and VCB at VMworld. Take a look at this doc companion->http://viops.vmware.com/home/docs/DOC-1392

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• Mask with a transparent visor Photoshop CS6 giving rise to problems saved as Tiff RGB and placed in Indesign CS5

  Is anyone aware of a black halo around objects of transparent feathers. The halo occurs when the area full of pic feathers to transparency.

  NOTE: The Image looks fine in Photoshop (CS6), but when it is placed as a TIFF RGB in Indesign (CS5) a black halo appears on the page. See Visual explanation below.

  

  This only happens when the image is a RGB Tiff and the layer mask is used to create transparency. If the image is saved as .psd, then it's fine. Also when tiff RGB is converted to CMYK, then it is ok.

  Is

  I look forward to suggestions from anyone.

  Ideally I might just start using the psd format, but I have to manage a lot of images that are already in tiff RGB and it's tedious to have to open and re-save all these.

  Adobe Photoshop CS5 RGB TIFF still work correctly.

  Thank you.

  Colourjam.

  (Production operator pre-press Digital Image)

  Tried your image. Same results. Halo in CS5, CS5.5 or CS6 none.

• Problem saving in PDF from MS Publisher

  Windows 7 (version 6.1)

  MS Publisher 2007 (SP2)

  I have a postcard document I am trying to save in PDF format. The document being saved very well but I had to change the size a little (increased the custom size from 4 x 6 to 4.25 x 6.25). Now, instead of the full document, here is what I get (lack of about 1/2):

  

  Sending to my printer works well, save in JPEG or PNG works fine... it's just the PDF that injects the picture off the page. Help?

  Thank you.

  With a few additional handling of the margains, etc., who took care of her. Thanks for the help jonbessant.