Problem scanner CanoScan 4400f

Similar Questions

• Problem with CanoScan Scanner

  Recently, I replaced a defective scanner with a scanner CanoScan LiDE 220. I use this with Dell desktop PC running VIsta 32 bit. The scanner is connected through a USB cable. I can scan pictures to my Adobe software, no problem, but am unable to scan documents and print directly on my Canon PIXMA iP4850-printer. When I use the scan on the scanner button, I get the message "CanoScan IJ Uitility Scan has stopped working". I tried to reinstall the driver software for the scanner and also driver software downloaded from Canon.

  Can someone advise?

  Canon says you could DO what you were trying to do (use it as a copier via your computer) with the current set of equipment?

  I mentioned it to uninstall all software for Canon because... If this system was installed with a different set of devices (especially since they were all same brand, Canon) front and work you desired (in this case a photocopier), you can get rid of all the evidence that for all the involved devices (printer included) and I could argue that even if the printer still prints It could be equally to blame in this way for the problem than anything else as a whole.   It is a full process (scan, pass through the computer and the printer drivers, print) and not only the new scanner.  A clean slate might give a better chance of getting this process at work - if he can.

  It is possible that Canon might be able to work with you for cleaning things so it works - it seems unlikely that it is a matter of 'firewall' any given track and the fact that you stated the Canon software crashes.

  I'm fair to assume that both are connected by USB only - no network cable (wired or wireless) between the computer and the printer device or a scanner?

• Canon CanoScan 4400F Scanner USB

  I have a 64-bit computer and my Canoscan 4400F drivers are not compatible.  Where and how can I download them

  The Canon site us has drivers available for Windows 7 64 bit - see the link: CanoScan 4400F.

• Scanner CanoScan 8400F cannot find the WIA driver in Win7 x 64

  Scanner CanoScan 8400F was working on win7 x 64 Home Premium Office.

  I use it every month. Last month it worked fine. Now stopped working - get message saying cannot find WIA driver. WIA service stisvc runs under services.

  I tried driver/software updates from Canon support - no help.

  Scanner works on laptop with win7 x 64 Professional with updated drivers/software.

  I think that the scanner is not serious, that desktop usb ports are in agreement, that support of Canon software is correct.

  What does not work in the operating system? Thank you.

  Pete

  PS. I've referenced the Community issue of MS at the following address, but cannot stop stisvc service to restart.

  Question

  trevor_914 asked on

  IAM having a problem set up a CanoScan 8400F scanner in Windows 7 (x 64). I get a message that I need a WIA driver. I can't find it on the Canon website. Help, please.

  I don't know what is a WIA driver. I have download3ed the driver Windows 7 (x 64) of the website of Canon, but the doews still scan does not work.
  • All the answers (1)
  

  Found this helpful 0

  Arya S Asok answered the

  Star of the community

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Method 1:
  You can download the firmware and the driver on the manufacturer's Web site.

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_8400f#DriversAndSoftware

  Method 2:
  You can try the following steps and check.
  a. go to Start and type Services.msc in search bar.
  b. search for WIA in the window and Double click and set it to started , if it is not.

  You can contact Canon support for assistance:

  http://www.USA.Canon.com/Cusa/support

  If you are always faced with the question, please respond with more information, and we will be happy to help you

  Hi Pete,.

  Were there any changes made on the computer before the show?

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  Method 2:

  I suggest to uninstall the drivers for the device and then reinstall it by downloading manually from the Web site:

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_8400f#DriversAndSoftware

  Uninstall / reinstall the drivers scanner

  http://kbsupport.Cusa.Canon.com/system/selfservice.controller?configuration=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&cmd=VIEW_ARTICLE&article_id=39107

  Method 3:

  See the articles and check if that helps:

  Start the Service of WIA (Windows Image Acquisition) or Stimon

  http://kbsupport.Cusa.Canon.com/system/selfservice.controller?configuration=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&cmd=VIEW_ARTICLE&article_id=23117

• Office Pro 6830 «problem Scanner»

  We bought the HP Office Pro 6830 a month ago and have had no trouble.  For the first time, I try to make a copy, probably the SIMPLEST function for this device to do!  I load the document, press on copy, select number of copies, hit enter and I get a sign of formidable yellow caution with the error 'problem scanner... '. Turn the printer off, then turn it on.  "If the problem persists, the scanner has is damaged and can not copy or scan ' mind you, we've never done a copy until today.  The printer prints very well of our laptops and iPad, even if it's FOREVER showing that it is offline!  Help, please... I just want to be able to copy and all the other features feature as HP claims should be available!

  Thank you

  If you had less than 30 days you must return.
  
  If you have more time than you have to contact HP support since you need a replacement machine.
  
  HP support will tell you to make sure that its plugged directly into the wall and want to make sure that the firmware is upgraded to the current level.
  
  The chances of patches that HP will recommend to make your machine work are slim, but they insist that judge you.
  
  If my post is solved your problem and click the accepted solution button under the post. In order to thank a technician for a post click the thumbs up button under the post.

• Need driver for scanner Canoscan flatbed

  Need software for SCANNER Canoscan N1220OU this device is about 4 - 5 years

  You must download the appropriate drivers/software on Canons site for your specific version of Windows 32/64-bit.
  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_lide_80

  I hope this helps.

• Vista Ultimate 64 - Driver scanner Canon 4400f not recognized/corrupted

  I have a USB of Canon 4400F scanner that works fine with other computers (Vista laptop and a desktop Windows XP), but for some reason any drivers/registry for this device is messed up on my PC, and it will not (re) install correctly.
  It worked perfectly for a long time (over a year), but do not use it for a while, after he is now stuck in the same unusable state, no matter what I do. I suppose that some day that something has caused this.

  All started with Device Manager telling me that the scanner was disabled when I had a glance to see why the scanner did not work. So, I allowed it. Status changed and then "no drivers are installed for this device. Yet, in the tab drivers, drivers are listed (good version) and appear as it should (the driver dll files are still visible and correct).

  So here's what I've tried:

  (1) uninstall the device and drivers. Reset. Reinstall the drivers, then plug in the device. Status: disabled. Activation of gives the original problem no 'drivers '.

  (2) uninstall again, this time including the devices 'hidden' when he was in other USB ports. Searched the registry for all traces of the appliance, by product ID, code provider GUID, name of the manufacturer etc.. Deleted every file temp (windows General and specific user) and also the windows update "DataStore" and "Downloads" folder just to be safe.
  Now, this method worked in the past for a U3 USB key that there was an identical error. This time? Restart, install the drivers, install device - FAIL. Even disabled error followed by 'pilots No. "

  Drastic 3) measures - (2), but also uninstalled and reinstalled the USB drivers themselves for controllers and hubs. Rebooted and waited while each unique device USB driver has been installed from scratch (mouse, keyboard, etc.). Install scanner drivers and plugged into the scanner. Same end result - all USB works except the scanner.

  I tried the above with both versions of the drivers from the Canon Website and the original driver CD.

  Is there another location on the C: drive or in the registry that I might be missing? Again, this scanner works fine when I install it on other PCs that have never seen before, so I'm convinced it's my registry or files corrupted, hidden somewhere in C:\Windows\. All my other USB devices work perfectly.

  Without having to reinstall Windows, is there a way to reset all USB and Windows thinks that he has never seen a single USB device before? As I said, the scanner works perfectly when I plug it into another PC - no need to install the drivers as Windows Update Gets the last and it works!

  System information:
  Windows Vista Ultimate 64 bit
  4 GB OF RAM
  AMD Phenom 9950 CPU
  Lots of disk space

  Karena,

  Thanks for your suggestion - but I managed to fix another way before I saw your post, so I have not been able to test your method.
  I uninstalled SP2 (with the intention of doing a repair using my Vista SP1 DVD). However, after removing SP2, the scanner worked! Then I reinstalled SP2 and it still works. A little boring because we won't know what was arrested exactly-, but I guess that this method could have changed the location of the registry that you mentioned?

  I bookmarked this thread for future use so, thank you again for answering.

  Dave

• Problem scanner allinone

  My psc 750xi left scanning.  The screen indicates it is a scanner failure.  I was not able to correct any error is the cause of the problem.

  Is it my photosmart 2610 reset in the same way?  When I try to scan, it says that I need to install or run HP software for this feature.  How did he get uninstalled and how I do if I can't find my original discs?

• Problem scanner HP Laser jet 3380

  Hello

  One of our clients have 2 x HP Laserjet 3380 all in one printer/scanner.  The printers are connected locally to each pc via usb and then shared & recorded windows sbs R2 so that everyone can access.  Everyone can print without problem, but the scanner does not work.  I tried to reinstall the most recent drivers several times and have even installed a few scan fix softare to your Web site, but unfortunately no printer allow the use of scanners out there.

  Please can you tell me if there is a solution to this problem?

  Thank you

  Please close as no response

• Problem scanner HP HP CN517A - HP ENVY 100 - D410a

  The scanner makes a horrible noise when I turn on the printer as if scanning bar is working, but cannot cross the whole bed scan.  I can print from my PC without any problem but can not scan or copy.

  If you can not make a copy of the standalone printer, without the computer, it's a hardware problem. You will need to contact the HP Support (1800-474-6836).

• Problems scanner HP CM 1015 MFP

  He can not get my scanner to work for HP CM 1015 MFP. I am running windows Vista 32 bit and have full use of my printer.

  When I try to scan options scan on the unity of its States "waiting for work.

  My HP Solution Center does not recognize my scanner.

  I don't have the orginal driver and downloaded the drivers of HP drivers.com.

  Is someone can you please tell me how I can solve this problem

  Thanks :)

  http://h30434.www3.HP.com/

  Try the HP Support Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 problem scanner

  I just upgraded to a laptop Lenovo G550 running Windows 7 Professional. As the laptop does not have a parallel printer port, I bought a Logilink cable USB to parallel, D - SUB 25-pin ((UA0054) to connect the printer (HP Officejet R65 all in one).) Then, I downloaded the driver for the R65. I can print without problem but don't view the scanner integrated on my all-in-one that says Microsoft should be 'plug and play '.

  When I start to-> panel-> display devices and printers, it displays the R65 printer with a green check mark BUT it USB2.0 - Print appears with a yellow exclamation point and says he needs troubleshooting. It will not display the scanner. When I troubleshoot the UA0054 he can not find the problem.

  Please can someone tell me how to remove the marker troubleshooting and get recognized scanner? Do I need an extra driver?

  I think I know now what the problem is. It seems that the Logilink USB to parallel converter cable, D - SUB 25-pin ((UA0054) supports only the basic functions of parallel printer and not to other functions such as the scanner.) The only way to get the scanner to work will be to find a more sophisticated connection.

  Thanks for the suggestions and help.

• Scanner CanoScan 3200F in Win7 64-bit

  I can't get this working scanner. I downloaded the driver from Canon, although it was not actually a "64-bit" driver, but the page to check compatibility Windows 7 from Microsoft for this scanner seems to indicate the 64-bit compatibility.

  I also downloaded the software "CanoScan Toolbox".

  Driver seems to settle, but no scanner appears. CanoScan ToolBox installs and runs, but no scanners do appear in the 'Select the Scanner' box in the options screen.

  Y at - it a particular order of installation should I re - try? Or something escapes me?

  Any help would be appreciated... Thanks in advance...

  There is no 64-bit drivers for the 3200F for any version of Windows.

  It will not work on 64-bit Windows.

• Scanner CanoScan Lide 70 Canon does not load on my new windows 7

  I have a new computer EliteBook hp laptop with windows 7 and I can't connect my Cannon CanoScan LiDE 70 scanner... Why? Can someone help me with this?

  At t quick glance resembles driver support stops at Windows XP.

  How old is this scanner? Have you checked to ensure compatibility with Windows 7?

  Compatibility Center says it's! http://www.Microsoft.com/Windows/compatibility/Windows-7/en-GB/search.aspx?l=en-GB&type=hardware&s=Canon%20CanoScan%20Lide%2070

• Problems scanner Canon LID210

  Separated from this thread.

  Yes, I have connected my scanner (Canon LIDE210) until I had installed the software. The scanner works in paint, but Photoshop does not recognize this scanner.

  I don't have the scanning software provided more but downloaded "qm__-win-2_5_0 - ea31_2.exe" on the Canon site. Tried, after I plugged the scanner, but it did not work.

  Is there a solution to my PC (Windows 7, 64-bit)?

  Hello

  Thanks for posting on Microsoft Community.

  As the scanner recognizes when you use the paint but no Photoshop, you can try reinstalling Photoshop and check. If that isn't the problem, I recommend you contact the support of Photoshop.

  To uninstall a program.

  http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

  You can contact support Photoshop here:

  http://www.Photoshop.com/products/Photoshop/help

  If you have any questions please let us know.