problem scanning HP w / windows 7 - printer not recognized

Similar Questions

• Problems with latest updates Windows (KB) do not install & repeated notifications via the taskbar icon

  Hello everyone,

  In my view, there are many people who seem to have a similar problem to mine, although I was unable to find an answer to one of my questions in this post.

  Description of the problem:

  Although my Windows Update is defined on download & install updates during the night hours every day, the latest updates, KB26333880, KB2572073and KB2518864 are not be installed.  I went to the Windows Update site to check my editing history.  He showed the green/white checkmarks next to all 3 updates.  The record also showed that updates have been tempted 3 times during the night.  After clicking on the button "Express" on the Home Page, the results show 3 above updates, but show "0 bytes', then '0 download time. '

  To me, this indicates that there is no update to download, despite the yellow Shield of Notification of update continues to appear in the taskbar.

  Corrective measures attempted:

  1. I tried to download / install twice unsuccessfully using IE8 and FF (including restarting the computer).

  2. download & run the program MS Fixitattempted, but received a message which read, "an unexpected error has occurred, please try again later." No. error code has seen with this message.  (I could RECORD the program on my desktop... just couldn't run the establishment).

  3 tried to search for the presence of these updates using start > run > %windir%KB###.log (where the # is the individual number of update KB).  Every time - a message appears indicating that the file is not found.

  4 looked at the Add/Remove Programs list (with the Show updates checkbox checked).  No updates KB mentioned above could be found.

  5 with SAS, MBAMand Outpost Security Suite Pro scans revealed no malware/security issues.  (SAS and MBAM are used only as scanners on request).

  This problem with the updates does not download & repeated notifications being indicated in the taskbar has occurred many times before.  On this occasion, I called Microsoft several times before finally, my computer remotely accessible support person and spent about 50 minutes to fix the problem.

  (Also, it is noted that almost every support person I spoke with has always tried to tell me that MS is not help with the problem of this type.)  I had to be rather several in my reply... tell the person that MS IS in fact provide assistance free security-related Windows updates.  They now provide free assistance is unknown). Besides... I have more a phone number for States anyway.

  My questions to the community:

  1. is it possible to download & install these 3 updates?

  2 is there an explanation as to why MS Fixit program will not be installed, and if so, are there certain corrective measures I can take which will allow me to download & run this program?

  System Specs:

  Desktop Dell Dimension 3000 Tower;  WIN XP Pro SP3.  2 GB OF RAM;  3.00 gHz CPU;  Outpost Security Suite Pro.  MBAM Pro (on request only).  SAS (on request only);  SpywareBlaster;  IE8 & FF

  Thank you for your time and help, review!

  Pete C.

  See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-updates-kb2633880-kb2633870-are-not-being/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• USB printer not recognized after Windows update

  OT: usb device not recognized

  After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

  Hello grasshopper.

  This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also try driver restore on the computer and check if it helps.

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  b. right click on the device for which the previous version of the driver is desired and then click Properties.

  c. click the tab drivers.

  d. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• J4580 printer not recognized by Windows 8

  Hi all, thank you very much in advance for the help.

  I tried to install HP Officejet J4580 Windows 8 64-bit, but its not recognized at all. Seesms that Windows does not recognize device correctly with the latest driver installed or uninstalled. The printer itself is work corretly (with the same cable on Fedora). I also tried HP tools for printers, but all ask me to connect the printer connected (as well as the isnatller).

  See you soon,.

  Ivan

  Well, I want you to go through the steps, I described above in my first set of instructions on how to uninstall/reinstall the printer.

  In addition to these steps, I will need to go to your C: drive and record programs and the programs (x 86) folder deletes files HP or Hewlett-Packard (assuming that the printer is the only device HP).

  Press on the R of Key + Windows which will bring up the run window. Type "%AppData%" and remove all HP / Hewlett-Packard records. Do the same for "programdata %."

  Reinstall the printer from the download that I linked.

  As a quick question, you upgrade to Win8 or it was installed?

• Driver for my printer not recognized by windows 8. Device

  I tried to install an old printer in windows8. The pilot was not available and none was available at HP. I get the message not recognized usb device and I can't get rid of the message. Chat help or tech support Microsoft have not been able to help. all of the suggestions.

  If this printer manufacturer provides no driver win7/8 and windows update via Add printer has no drivers, its does not work

  And any workaround method will be more expensive than buying a new printer compatible

• Printer not recognized by PC

  I recently bought A HP 1050 printer all in one.  Program loads the installation disc ok, but while scanning and copying work fine, printer will not respond to print in Word, Notepad etc.  I tried the uninstall software and download on the website of HP, but with the same result.

  Vista Home Basic operating system.

  Hi Tod,

  Thanks for posting your question on the Forums of community of Microsoft.
  After the description of the question, I understand that you cannot print from the printer.
  Let me go ahead and help you with the issue.
   
  You get the error message?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems
   
  Method 2:
  Check out the link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-i-print
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Scan to computer. Computer is not recognized Officejet6500APlus all-in-one

  Previously, when starting a scan session I hit on my desktop printer icon, click on 'functions of the scanner', then click on "connect the scanner to the computer. He worked all the time.  However, I just had to replace the printhead and now I see no way to connect the scanner to the computer when the icon is selected.  In fact, nothing about the function scan at all.  The printer display indicates that no computer is detected.   I checked in the manual of the user without success.  The printer is connected wireless and I was able to print documents from the computer.  My operating system is Windows 7.  Any help out there?

  Hi DianeNP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you encounter some problems when trying to scan to your computer.  To see if the HP scanning option is available, click Start and then go to all programs, and then click the yellow folder HP. In the HP folder, you should see your printer quoted as well as a scanner HP.  Try to scan from here.  If it solves your problem, you can place a shortcut on your desktop by analysis of HP right click and select Create shortcut on the desktop

  If this does NOT resolve your problem, please do not hesitate to write back and I'll be happy to help you.

  Thank you.

• printer not recognized

  Can anyone help please?

  I have a printer HP 2050 all-in-one J510 series which I was printing with my new laptop with Windows 8 success in plugging just USB. It is not installed as says not compatible with 8 disc. (my old pc has 7) I replaced a cartridge this morning and since then have not been able to print, it is not recognizing the printer.

  Any advice would be appreciated.

  You can try to run the HP Print & Scan Doctor program. (link)

  Link to install the driver.

• Windows XP is not recognizing the USB Ports?

  My NetBook of Asus Windows XP does not see any USB device I plug. Everything was fine before I left on vacation. My return (netbook left alone in the House, nobody else uses) I plug in any device is recognized.

  It is also not recognize memory cards I plug in the memory card slot. This has all worked very well before.

  No removable disks are visible in disk management. Device Manager can't find no error in the sections of the USB. Check for material changes in DM solve either. Drivers seem to be ok from what I can tell.

  Of course, I restarted a sound all USB ports and the memory card with multiple devices.

  Help, please

  Hello

  Refer the article that could help you solve this problem.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• HP P1005: HP printer not recognized computer

  PC is working with environment doamin... printer suddenly stop working and its display offline... once that his to connect to another computer with a doamin. printer works fine. What will be the problem? Once I had also the problem with the laptop... was not with the domain name...

  Thank you...

  You are probably connected to the printer via a USB cable, in which case the fact that the PC is in a domain is absolutely no impact on the problem.

  If the printer works on a PC but fails on another PC, the PC is a failure on a a driver problem.

  So I would recommend downloading the latest driver from hp.com, remove the existing driver, and then install the driver newly downloaded.

• Windows login password not recognized

  Original title: sign the password not recognized.  Similar problems are are produced.

  Already happened.  Tried to sing in password rejected.  It's the same thing and I him have not changed for a long time.

  Log on to another administrator user account and change your password to something that you will remember. Then search for malicious software because these things do not happen by themselves. Or think about who else has access to your computer and may have changed your password without your knowledge.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you have another administrative user (see Configuring user recommended at the end of this post) and then you have to activate the built-in Administrator, and then change the password of your user account. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Windows 7 installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system (XP, Vista), you will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data. Windows 7 can burn the .isos natively.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7:

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• Scanner in Windows driver is not recognized

  I have Windows 7 64 bit. I managed to install the scanner driver in Windows according to the instructions. The driver is not recognized. What is the problem?

  Jacob

  If the driver is not recognized that the installation has failed.  Can you be more specific?

• Laptop had motherboard replacement and now Windows 7 is not recognized as authentic.

  Laptop computer had mother board replacement and format hard drive.  Store replaced windows 7 starter edition, but it is not recognized as authentic, help!

  Heh - I know the feeling :)

  Ok...

  Click on the early roundel

  in the search box, type

  SLUI 3

  and press the Enter key

  This starts the wizard change the product key.

  Follow the instructions.

  The key you need is on a COA sticker that is attached to your machine - for examples, see http://www.microsoft.com/en-us/howtotell/Hardware.aspx

  It is in the format AAAAA-BBBBB-CCCCC-DDDDD-EEEEE-FFFFF

  Do not enter dashes - the machine that will do this automatically,

• Windows 8 is not recognizing the extra space in the hard disk resized

  I was out of the room on the virtual drive of Windows 8 in VMWare Fusion 5.02. I increased the size of the disk in the settings, but when I run Windows, he does not see the extra space. Obviously, I have to leave something out of the process. If you can help me, please let me know what I am doing wrong. Thank you!

  Have you ever increase the NTFS of Windows partition in disk management or you do not see the additional disk space

  André

• Photosmart 3310: photosmart 3310 windows 10 - printer not found

  I bought a new computer (Lenovo: 30) and immediately updated for Windows 8.1 to 10. I ran the Print and Scan doctor who has downloaded the latest version of the software, HP Photosmart and Officejet full feature software and drivers - Full_Webpack - 140.0.408 - AIO_CDA_FSW_Full_Win_WW_140_408-5-5 and then installed.

  If I use a USB cable, cable network or WiFi connection, the installer of HP does not see the printer. This is true even when I type the IP address.

  If I run the doctor print and scan, it does not see the printer the first time. Only once it has been turned off, then on again it to see. He ends by suggesting that I down load the software for the printer.

  I find printing methods, but I can't scan documents which I do often.

  I uninstalled and reinstalled several times softeware. I have turner off the firewall scanner and McAfee in real time, as suggested by some post that this could be the problem.

  I can see the printer in the file Explorer > network window and get its network name, I can access the printer using a web browser and IP address. I can see it, the PC can see it, however, the HP installer never sees.

  Your help would be appreciated.

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).