HP P1005: HP printer not recognized computer

Similar Questions

• USB printer not recognized after Windows update

  OT: usb device not recognized

  After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

  Hello grasshopper.

  This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also try driver restore on the computer and check if it helps.

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  b. right click on the device for which the previous version of the driver is desired and then click Properties.

  c. click the tab drivers.

  d. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• printer not recognized

  Can anyone help please?

  I have a printer HP 2050 all-in-one J510 series which I was printing with my new laptop with Windows 8 success in plugging just USB. It is not installed as says not compatible with 8 disc. (my old pc has 7) I replaced a cartridge this morning and since then have not been able to print, it is not recognizing the printer.

  Any advice would be appreciated.

  You can try to run the HP Print & Scan Doctor program. (link)

  Link to install the driver.

• I have a problem with my printer does not print not the computer it's a software problem, a problem in device driver or a service pack problem

  I'm having a problem with my printer. he do not print on the computer. He told me that it is connected. Is this a problem with windos vista or is it a problem that I need to upgrade to service pack 2 and how do I know which service pack I have.

  Hello

  ·        What is the model and brand of the printer?

  ·        What happens when you try to print?

  ·        The printer worked fine before?

  You can run the fix in the here is given a link and try the solutions too.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Burner DVD not recognized computer Gateway 2750 laptop under Vista

  I have a DVD burner and my computer recognizes that the CD burner, I try to update the drivers but it doesn't show any DVD material. __

  I have a laptop gateway 2750 running Vista Home Prem and I a bicoeur precessor.  My computer only recognizes the CD-ROM drive and does not see the same DVD at all.  I tried updating my drivers but it won't allow me to add a DVD driver. Help

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Check with the support of the door of entry for firmware updates and known issues.

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• J4580 printer not recognized by Windows 8

  Hi all, thank you very much in advance for the help.

  I tried to install HP Officejet J4580 Windows 8 64-bit, but its not recognized at all. Seesms that Windows does not recognize device correctly with the latest driver installed or uninstalled. The printer itself is work corretly (with the same cable on Fedora). I also tried HP tools for printers, but all ask me to connect the printer connected (as well as the isnatller).

  See you soon,.

  Ivan

  Well, I want you to go through the steps, I described above in my first set of instructions on how to uninstall/reinstall the printer.

  In addition to these steps, I will need to go to your C: drive and record programs and the programs (x 86) folder deletes files HP or Hewlett-Packard (assuming that the printer is the only device HP).

  Press on the R of Key + Windows which will bring up the run window. Type "%AppData%" and remove all HP / Hewlett-Packard records. Do the same for "programdata %."

  Reinstall the printer from the download that I linked.

  As a quick question, you upgrade to Win8 or it was installed?

• Driver for my printer not recognized by windows 8. Device

  I tried to install an old printer in windows8. The pilot was not available and none was available at HP. I get the message not recognized usb device and I can't get rid of the message. Chat help or tech support Microsoft have not been able to help. all of the suggestions.

  If this printer manufacturer provides no driver win7/8 and windows update via Add printer has no drivers, its does not work

  And any workaround method will be more expensive than buying a new printer compatible

• HP printer not recognize computer

  I have problems with the installation of my HP Photosmart C6180. I am trying to connect the printer to my PC via the USB port, but my computer does not recognize the printer as being connected. The printer is on, and I know that the USB ports work because the other USB devices are recognized.

  I downloaded the drivers for this printer from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=&cc=us&product=1153494& so I don't think it's a driver problem.

  in any case, my computer is running WIndows XP Home Edition SP3. I hope there, can someone help me!

  Looks like it was a defective cable. Replaced it and no problem. Thank you!

• Printer not recognized wireless

  Trying to add an additional printer wireless to wireless cisco just doesn't recognize. It appears in the control panel and works fine manually. Have two printers on the network and had the same problem with the printer new's replacement. Delete this printer and all of a sudden the cisco network acknowledged the second printer, which he has not done before.

  Also tried plugging the new printer on the router via an ethernet cable and appears as offline.

  Hello

  If the wireless printer connects to a router.

  Install the printer software on each computer that will use it and set it up through the interface of the software.

  Jack MVP-networking. EZLAN.NET

• 4400 HP printer not recognized

  I have had this printer for some time. Two days ago, I have finally enabled him to make the HP udates. Now my computer does not recognize my printer. Sigh!

  I have the Windows 7 operating system.

  Can I remove updates somehow, or... help it even once, somehow recognize it?

  Thanks in advance. Helen.

  Hello

  The best way will be to do a system restore to the date where the unit was working fine.

  System restore

• problem scanning HP w / windows 7 - printer not recognized

  I can not the scanner in hp psc 2355 all in one for work or be recognized w / windows 7, the printer is not a problem.

  Have someone else and fix this?

  Thank you.

  Ray

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01796879&CC=UK&DLC=en&LC=en&os=4062&Product=422000&sw_lang=

• Photosmart all in one C5180 will print not black, computer laptop satellite L775D-S7132, Windows 7

  Photosmart C5180 all-in-one

  New ink installed all the cartridges.

  Printer does not print black.

  What should we do?

  There is a document with steps to help solve when there is a print quality problem in a Photosmart C5180. The document can be accessed here.

• Printer not recognized by PC

  I recently bought A HP 1050 printer all in one.  Program loads the installation disc ok, but while scanning and copying work fine, printer will not respond to print in Word, Notepad etc.  I tried the uninstall software and download on the website of HP, but with the same result.

  Vista Home Basic operating system.

  Hi Tod,

  Thanks for posting your question on the Forums of community of Microsoft.
  After the description of the question, I understand that you cannot print from the printer.
  Let me go ahead and help you with the issue.
   
  You get the error message?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems
   
  Method 2:
  Check out the link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-i-print
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• My OfficeJet Pro 8600 more returns "not recognized computer" when I scan from desktop computers.

  My 8600 OJPro more has been configured to recognize my Dell computer.  What settings should I on my computer for the printer OfficeJet Pro 8600 more allow scanning from my Dell desktop?

  I would try to run printing HP and doctor Scan first to see if the problem can be solved with this automated tool.  Click here to access the tool.

  Thus, there are measures to check the WIA service:

  (1) type services.msc in the section run or search programs and files

  (2) scroll the WIA: Acquisition of Image Windows service

  (3) to ensure that this service is running.  Click on stop, and then restart to ensure that the service is running properly

  (4) restart the PC to see if WIA will resume functionality

  (5) check the properties (right click on WIA) 2 dependencies are defined

  (6) check to make sure that the remote procedure call (RPC) is running

  (7) check the detection equipment core and make sure that this forum works

  Let me know how it goes.

• Lexmark X 3350 printer not recognized Vista

  can someone help me get my computer to recognize my printer? even with the newer lexmark driver download, microsoft windows do allow me to print.

  http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X3350&ACTP=recommend&ID=DR9966&segment=download&UserLocale=en_AU&oslocale=en_US&locale=en

  Above is the link to download the driver for Vista 32 bit for you printer model.

  Uninstall/reinstall the printer according to the instructions of Lexmark.

  See you soon.

  Mick Murphy - Microsoft partner