Problem screen screen LCD Tecra A4

Similar Questions

• Physical breakdown of the screen LCD - Tecra A3

  My laptop is Tecra A3-117. Buy 23/05/2005.
  I am a novice. What should I do?

  Hello

  You must contact the after-sales Service of Toshiba partner.
  On this page you will find the ASP that is responsible for your country.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good bye

• dust behind the screen LCD - common problem?

  Hi, I recently bought a toshiba EQUIUM A60-181, and I'm
  facing a problem with the LCD screen.
  There seems to be a defect or the dirt behind the glass
  because it blocks the light of a pixel. Any attempt of
  apply moderate pressure to move this filth that has failed. I was
  I was wondering if it is common with screens LCD expect a sort
  I can't believe that this has passed quality of imperfection
  control. Have I not justification for firing
  toshiba for fixing, it is barely 1 week old?
  I have read the warranty booklet and there is no mention of
  dead pixel return policy can you elaborate on what is
  and what is not covered by the warranty?

  see you soon,

  Richard.

  Hello

  In my opinion, you should contact the Service partner. You have purchased a new product and if you see that there is something wrong, you can contact them. I'm sure that the technicians can give you more information on this issue.

• IQ816 double video screen LCD (multiplex) problem

  I have an iq816 in which the motherboard just died, then it wouldn't turn on, POST, nothing. The motherboard has been replaced and the system now starts at the bottom of windows very well with one exception: all that is shown on the display is multiplexed 6 times. The image to fill the entire screen fills to only 1/6 of the screen and is repeated 6 times. The machine has no video output, so I can't test an external monitor.
  
  Here's what I know so far:
  1. the symptom appears during the during the POST, not only in Windows and BIOS configuration screen, then it cannot be a driver problem.
  2. the system has a video card discrete MXM and two LVDS ports on the motherboard (LVDS2 for discreet video) and LVDS1 for the embedded video. I already tried to remove the discrete video card and connecting the LCD to LVDS1 (integrated video), but the problem persists, this isn't a video card problem.
  3. in the configuration of the BIOS, the machine claims to be an iq504, not an iq816. I know that the machines take the same motherboard (same HP reference at least), so I don't know whether to be alarmed by the present or not. I tried to Flash the latest BIOS for the iq816, but the listed model is always incorrect. Is there another firmware, I need to flash, or is it a distraction?
  4. There is a set of DIP switches on the motherboard that I have not found any documentation on, but they are labeled GPIO, so I doubt they will help. Yet, no idea this here?
  5. There is a block of jumpers 8-pin without a label. I think that the bit is used to reset CMOS and reset password, but would like to know what are the other pins.
  
  6. the causes I can think of:
  A. bad cable LVDS (other on command - update)
  B. bad screen LCD (game over)
  C. something to do with this strangeness of motherboard model
  
  Thanks for any help/insight!

  Hey joesuffceren,

  I'm sorry that you use in this show, but thank you for providing this useful information! I did some research on your motherboard.

  Here is a link showing the motherboard specifications - develop internal connectors

  GPIO is listed there as the DIP switch used in the factory to match the motherboard to the LCD so it might be your answer. I searched for any kind of documents I can find on which positions the rider must be on for the iq816 but have not yet find something. I wanted to get this information for you right where you want to go ahead and try changing this autour rider to see what works.

  I hope this information helps! Forward to your response

• Problems with the LCD - samples.war 2.6 LCD screens

  Hello!
  We are trying to compile a project with screens LCD - samples.war, using LCDS 2.6 Beta 1, and it does not work. It generates this error:
  
  AddChannel (String) method is undefined for the type DataDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 55
  
  CreateDestination (DestinationSettings) in DataService type method is not applicable for the arguments (String) LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 54
  
  CreateDestination (DestinationSettings) in the MessageService type method is not applicable for the arguments (String) LCD-samples/src/flex/samples/runtimeconfig
  ChatRoomService.java
  line 42
  
  CreateDestination (DestinationSettings) in the RemotingService type method is not applicable for the arguments (String) LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeRemotingDestination.java
  line 18
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments () lcds-samples/src/flex/samples/feed
  Feed.Java
  line 32
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments () lcds-samples/src/flex/samples/feed
  Feed.Java
  line 53
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments (lcds-samples/src/flex/samples/marketdata)
  Feed.Java
  line 42
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments (lcds-samples/src/flex/samples/marketdata)
  Feed.Java
  line 67
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments (lcds-samples/src/flex/samples/pdfgen)
  PDFService.java
  line 32
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments (lcds-samples/src/flex/samples/pdfgen)
  XDPXFAService.java
  line 32
  
  The method getFlexClient() is undefined for the type FlexContext LCD-samples/src/flex/samples/qos FlexClientConfigService.java line 15
  
  The method getFlexClient() is undefined for the type FlexContext LCD-samples/src/flex/samples/qos FlexClientConfigService.java line 21
  
  Method getService (String) is undefined for the type MessageBroker LCD-samples/src/flex/samples/runtimeconfig
  ChatRoomService.java
  line 41
  
  Method getService (String) is undefined for the type MessageBroker LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 53
  
  Method getService (String) is undefined for the type MessageBroker LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeRemotingDestination.java
  line 17
  
  The method isStarted() is undefined for the type MessageService LCD-samples/src/flex/samples/runtimeconfig
  ChatRoomService.java
  line 44
  
  SetDestination (DataDestination) method is undefined for the type JavaAdapter LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 78
  
  The setId (String) method is undefined for the type JavaAdapter LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 76
  
  SetMetadataSettings (MetadataSettings) method is undefined for the type DataDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 61
  
  SetNetworkSettings (DataNetworkSettings) method is undefined for the type DataDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 73
  
  The setScope (String) method is undefined for the type DataDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 57
  
  The setSource (String) method is undefined for the type DataDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 56
  
  The setSource (String) method is undefined for the type RemotingDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeRemotingDestination.java
  line 19
  
  SetSubscriptionTimeoutMinutes (int) method is undefined for the type DataNetworkSettings LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 64
  
  The start() method is undefined for the type MessageDestination LCD-samples/src/flex/samples/runtimeconfig
  ChatRoomService.java
  line 46
  
  The DatabaseCheckService type must implement the inherited abstract method Service.getSettings () DatabaseCheckService.java LCD-samples/src/flex/samples 9 line
  
  The EmployeeRuntimeDataDestination type must implement the inherited abstract method Service.getSettings (LCD-samples/src/flex/samples/runtimeconfig)
  EmployeeRuntimeDataDestination.java
  line 44
  
  The EmployeeRuntimeRemotingDestination type must implement the inherited abstract method Service.getSettings (LCD-samples/src/flex/samples/runtimeconfig)
  EmployeeRuntimeRemotingDestination.java
  line 8
  
  Do you know something? There is a updated version of screens LCD - samples.war to LCDs 2.6?
  

  Hi Rafael,.

  LCDS 2.6 is not available on Adobe Labs. Please address all questions and issues the appropriate preliminary Forum.

• Half left of my screen LCD on Satellite P30 suddenly became black.

  I scoured the internet for info on how to fix and I have not been successful.

  From what I found, I think the 17 "display using 2 backlight. If this is the case of the point at which the black part and a part of work would be so sudden... I mean this isn't as it blends into the black... its a change of süden perfectly normal of Jet Black.

  The right side of the screen is perfect, that no problem at all, on the left, perfect black Jet.

  Can anyone confirm this is its likely to do this problem, otherwise what would cause only half of the screen to die?

  PS Ce is not the video card, I connected to an external monitor and I get a full video out, no problem.

  Cordially Kidnest

  Jim.

  It seems that your LCD has disappeared. In this case, it might be everything from a disconnection of the cable to an LCD presenting electronic malfunction.

  I recommend you, if you still have warranty on your machine, visit the following site and contact a service partner chartered local for a checkup of hardware on your computer. I guess that it s definitely a related problem of the LCD, but it s do not know...

  Here´s the link to find the nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  Welcome them

• How to set up two monitors with screen LCD and HDTV on computer that is running Windows 7

  Issues of identity and position monitor

  I use a LCD and an HD TV on my computer. I have HDTV mounted to my left on the wall in my room and the LCD is on my desk in front of me. I have my monitor set as my main screen and HDTV as secondary. Windows identifies the HDTV as monitor 1 and my screen LCD 2. After starting the computer they work very well as they should. My problem is during the boot process. When the computer starts, it displays only the boot screen/POST on monitor 1 (HDTV) but not my main screen #2 (LCD). This is a problem when I don't have my HDTV now, I don't see the MESSAGE options. I don't want to always have my HDTV and crane my neck every time I need to change the BIOS settings or use the MESSAGE options. Is there any solution for this?

  Chris

  AMD Penom II x 4 940

  Windows 7 64 bit

  Gigabyte GA-MA770-UD3

  NVIDIA GeForce GTX 275

  DCLCD 19 "VGA monitor

  VIZIO HDTV 32 '' (hdmi) "

  Hi Darth Polizei,

  I hope that's not redundant but did you try to set your monitor 19 "as the main display?

  1. In the screen resolution window, you click the icon of the monitor that represents the secondary monitor.
  2. You click to select the "Make my main screen" check box, and then click OK.
  3. You log out of the computer.
  4. You log on to the computer.

  Please let us know.

  Thank you!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite 5205-S505 - support wide screen LCD TV?

  I have a new wide screen LCD TV with a VGA port, I connected this with my old Satellite 5205-s505 via the VGA port as the second screen. But it displays 'unsupport signal' on the TV screen.

  Can someone have the answer.
  Thanks anyway.

  Hey,.

  I think that it s according to the external display what resolutions it supports.
  Normally, your computer user manual laptop, you will find a list of the supported screen resolutions and you should check this!

  I also recommend to install the last page of Toshiba display driver.

• How can I remove the base on a screen LCD S232HL?

  I am moving and you need to remove the base of a screen LCD S232HL can anyone help?

  I think you have to shoot, place the monitor on a flat surface with a cloth under the screen to prevent scratches and pull on the base.

• Replacing the screen LCD Z30 blackBerry for Z30

  I can't find the support Web site of the spare parts for my 30 Z in the Blackberry.ca. I am looking to buy a replacement screen LCD for my BlackBerry 30 Z if possible or any company that sells official part, I can do it myself, I just want to buy, thanks

  As Leslie said, eBay and Amazon have them, I've seen them for $45 - $70 each.

  Make sure that you don't get the Verizon version, you want the GSM model which is more common.

  I replaced mine and helped a friend with a replacement, it is a very simple process to remove the 8 screws and using a pry tool to open the back, disconnect the ribbon cable and then turn everything above.

  Good luck.

• Sony VAIO all-in-One PC 20 tap computer touch screen LCD SVJ20214CYB Windows 8.

  I want to buy the Sony VAIO Tap 20 all-in-One PC computer touch screen LCD SVJ20214CYB Windows 8. I'll be able to use a Wacom digitizer pen in Windows Journal and Office OneNote?

  Hi Treoc,

  Thanks for choosing Microsoft Community!

  Want to know if the Wacom digitizer pen works in the Windows Journal and Office OneNote, I suggest to contact Wacom Digitizer support.

  http://community.Wacom.com/

  I checked in the Center of Windows 8 compatibility for more information about this device, unfortunately it is not listed there. You can also check using this link.

  Also see this link for Windows 8 features:

  http://Windows.Microsoft.com/is-is/Windows-8/meet

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Windows 7 can be installed without screen lcd monitor r

  Windows 7 can be installed without screen lcd monitor r

  N ° you must enter information and you will need to see what happens...

• Bubble like spots on the screen LCD T410

  Just noticed this a few minutes ago on my T410 (2516-CTO), there are three major tasks and three small spots on the centre-left of my screen. I tried to wipe the screen with a clean Microfiber cloth and a gentle jet of glasses cleaner on the cloth. All the dust was released, but the tasks remain. They appear only when I inspect the screen with a flashlight on dead. These tasks similar to white reflecting film-y areas, like the surface of the screen LCD is peeled off with very thin air bubbles. They seem to resemble defects under the surface - is my LCD delamination or anything else bad past?

  Doesn't look like it, they think that his 'damage' I have to pay for. I've only had this T410 for a week.

  Good news! After a long out of stock, the technician on-site, finally, came and succeeded him. Less than 15 minutes so I was looking at.

• How to join the table in screens LCD

  Hello

  How can I join the tables in the screens LCD and show them in a datagrid?

  I run LCDS3 and tomcat.

  Any help is appricitated

  User (name, surname, address)

  Address (address, State, country, postal code)

  If you want to display data below in your data grid

  ---------------------------------------------------------------------------

  firstName.       lastName.  State

  ---------------------------------------------------------------------------

  user.firstName | user.lastName | User.Address.State

• Turn off the screen on Tecra and using external monitor/LCD TV

  I recently bought an LCD TV and was anxious to use it as a monitor for my Toshiba Tecra M2V. I ran into problems.

  I seem to be unable to 'disable' the laptop screen and ONLY use the LCD TV screen at cary, work, games etc. I seem to be rather only beable to COMBINE the LCD with my LCD screen, by creating a "two" screen I followed all the online help and I am still unable to have one screen.

  I just want some LCD TV as my screen!

  Any ideas on how to do this? It's really a pain!

  TIA

  Hello

  Usually, you should be able to do this by using the FN + F5 key combination. As far as I know if the device is connected to the TV, you have three options (maybe depends on the laptop model) LCD only, LCD and external, just the TV device.

  You can also try to switch using GeForce properties:
  Display properties > settings > advanced > GeForce tab > Device Settings > Select output device.