Problem setting up vpn l2tp/ipsec
I tried to configure an ASA5505 with a l2tp/ipsec vpn which I can connect to with Windows Vista vpn client. I had connection problems. When I try to connect, watch windows vpn client tell an error message "error 789: the L2TP connection attempt failed because the security layer detected a processing error during initial negotiations with the remote computer." The newspaper on the SAA is errors saying "Phase 1 failure: incompatibility of the types of attributes of class Group Description: RRs would be: unknown Cfg was: Group 2.
It seems that the ASA does not like windows vpn client IKE proposal but I do not know if I interpret correctly this error message.
I was wondering if anyone has seen this problem or have had success with this type of installation. I have the setup of device OK so that I can connect with the Cisco VPN client, but get l2tp/ipsec Setup to work with the windows vpn client turns out to be problematic.
Can you post the Config of your ASA. Did you check the following link:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807213a7.shtml
Tags: Cisco Security
Similar Questions
-
AC100 - no VPN L2TP/IPSec PSK available
Android 2.2 (Froyo) devices show for VPN connections the following possibilities: PPTP, L2TP, PSK L2TP/IPSec and L2TP/IPSec CRT (checked on several brands of smartphones).
The AC100 appears only from any PPTP and L2TP, so not L2TP/IPSec.
No idea why they are missing, and how to fix this?
Need for L2TP/IPSec to a VPN with a Sonicwall 3060/Pro.
Here is a description how to connect: [https://www.fuzeqna.com/sonicwallkb/consumer/kbdetail.asp?kbid=8658]
Hello
AFAIK the L2TP/IPSec is only available for android devices routed.
So maybe it's the reason why the L2TP/IPSec in unavailable for AC100.
I found here a beautiful Android L2TP/IPSec VPN HowTo
http://blogs.nopcode.org/brainstorm/2010/08/22/Android-l2tpipsec-VPN-mini-HOWTO/Maybe it might help a bit!
-
Problem Cisco 2811 with L2TP IPsec VPN
Hello. Sorry for my English. Help me please. I have problem with L2TP over IPsec VPN when I connect with Android phones. Even if I connect with laptop computers. I have Cisco 2811 - Cisco IOS software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 (2) T2, (fc3) SOFTWARE VERSION. I configured on L2TP over IPsec VPN with Radius Authentication
My config:
!
AAA new-model
!
!
AAA authentication login default local
Ray of AAA for authentication ppp default local group
AAA authorization network default authenticated if
start-stop radius group AAA accounting network L2TP_RADIUS!
dhcp L2tp IP pool
network 192.168.100.0 255.255.255.0
default router 192.168.100.1
domain.local domain name
192.168.101.12 DNS server
18c0.a865.c0a8.6401 hexagonal option 121
18c0.a865.c0a8.6401 hexagonal option 249VPDN enable
!
VPDN-group sec_groupe
! Default L2TP VPDN group
accept-dialin
L2tp Protocol
virtual-model 1
no authentication of l2tp tunnelsession of crypto consignment
!
crypto ISAKMP policy 5
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 55
BA 3des
md5 hash
preshared authentication
Group 2ISAKMP crypto key... address 0.0.0.0 0.0.0.0
invalid-spi-recovery crypto ISAKMP
ISAKMP crypto keepalive 10 periodicals
!
life crypto ipsec security association seconds 28000
!
Crypto ipsec transform-set esp-3des esp-sha-hmac L2TP
transport mode
Crypto ipsec transform-set esp-3des esp-md5-hmac 3DESMD5
need transport mode
!!
!
crypto dynamic-map DYN - map 10
Set nat demux
game of transformation-L2TP
!
!
Crypto map 10 L2TP-VPN ipsec-isakmp dynamic DYN-mapinterface Loopback1
Description * L2TP GateWay *.
IP 192.168.100.1 address 255.255.255.255interface FastEthernet0/0
Description * Internet *.
address IP 95.6... 255.255.255.248
IP access-group allow-in-of-wan in
IP access-group allows-off-of-wan on
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
IP virtual-reassembly
IP route cache policy
automatic duplex
automatic speed
L2TP-VPN crypto card
!interface virtual-Template1
Description * PPTP *.
IP unnumbered Loopback1
IP access-group L2TP_VPN_IN in
AutoDetect encapsulation ppp
default IP address dhcp-pool L2tp peer
No keepalive
PPP mtu Adaptive
PPP encryption mppe auto
PPP authentication ms-chap-v2 callin
PPP accounting L2TP_RADIUSL2TP_VPN_IN extended IP access list
permit any any icmp echo
IP 192.168.100.0 allow 0.0.0.255 192.168.101.0 0.0.0.255
IP 192.168.100.0 allow 0.0.0.255 192.168.3.0 0.0.0.255
allow udp any any eq bootps
allow udp any any eq bootpc
deny ip any any journal entryRADIUS-server host 192.168.101.15 auth-port 1812 acct-port 1813
RADIUS server retry method reorganize
RADIUS server retransmit 2
Server RADIUS 7 key...Debugging shows me
234195: * 3 Feb 18:53:38: ISAKMP (0:0): received 93.73.161.229 packet dport 500 sport 500 SA NEW Global (N)
234196: * 3 Feb 18:53:38: ISAKMP: created a struct peer 93.73.161.229, peer port 500
234197: * 3 Feb 18:53:38: ISAKMP: new position created post = 0x47D305BC peer_handle = 0x80007C5F
234198: * 3 Feb 18:53:38: ISAKMP: lock struct 0x47D305BC, refcount 1 to peer crypto_isakmp_process_block
234199: * 3 Feb 18:53:38: ISAKMP: 500 local port, remote port 500
234200: * 3 Feb 18:53:38: insert his with his 480CFF64 = success
234201: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234202: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_READY = IKE_R_MM1
234203: * 3 Feb 18:53:38: ISAKMP: (0): treatment ITS payload. Message ID = 0
234204: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234205: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
234206: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234207: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 164
234208: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234209: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
234210: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is NAT - T v2
234211: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234212: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 221
234213: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234214: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 194
234215: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234216: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is DPD
234217: * 3 Feb 18:53:38: ISAKMP: (0): looking for a key corresponding to 93.73.161.229 in default
234218: * 3 Feb 18:53:38: ISAKMP: (0): success
234219: * 3 Feb 18:53:38: ISAKMP: (0): pair found pre-shared key matching 93.73.161.229
234220: * 3 Feb 18:53:38: ISAKMP: (0): pre-shared key local found
234221: * 3 Feb 18:53:38: ISAKMP: analysis of the profiles for xauth...
234222: * 3 Feb 18:53:38: ISAKMP: (0): audit ISAKMP transform 1 against policy priority 5
234223: * 3 Feb 18:53:38: ISAKMP: type of life in seconds
234224: * 3 Feb 18:53:38: ISAKMP: life (basic) of 28800
234225: * 3 Feb 18:53:38: ISAKMP: 3DES-CBC encryption
234226: * 3 Feb 18:53:38: ISAKMP: pre-shared key auth
234227: * 3 Feb 18:53:38: ISAKMP: SHA hash
234228: * 3 Feb 18:53:38: ISAKMP: group by default 2
234229: * 3 Feb 18:53:38: ISAKMP: (0): atts are acceptable. Next payload is 3
234230: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234231: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
234232: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234233: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 164
234234: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234235: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
234236: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is NAT - T v2
234237: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234238: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 221
234239: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234240: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 194
234241: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234242: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is DPD
234243: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234244: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM1234245: * 3 Feb 18:53:38: ISAKMP: (0): built the seller-02 ID NAT - t
234246: * 3 Feb 18:53:38: ISAKMP: (0): lot of 93.73.161.229 sending my_port 500 peer_port 500 (R) MM_SA_SETUP
234247: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234248: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM2234249: * 3 Feb 18:53:38: ISAKMP (0:0): received 93.73.161.229 packet 500 Global 500 (R) sport dport MM_SA_SETUP
234250: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234251: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM2 = IKE_R_MM3234252: * 3 Feb 18:53:38: ISAKMP: (0): processing KE payload. Message ID = 0
234253: * 3 Feb 18:53:38: crypto_engine: create DH shared secret
234254: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_DH_SHARE_SECRET (hw) (ipsec)
234255: * 3 Feb 18:53:38: ISAKMP: (0): processing NONCE payload. Message ID = 0
234256: * 3 Feb 18:53:38: ISAKMP: (0): looking for a key corresponding to 93.73.161.229 in default
234257: * 3 Feb 18:53:38: ISAKMP: (0): success
234258: * 3 Feb 18:53:38: ISAKMP: (0): pair found pre-shared key matching 93.73.161.229
234259: * 3 Feb 18:53:38: crypto_engine: create IKE SA
234260: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_SA_CREATE (hw) (ipsec)
234261: * 3 Feb 18:53:38: ISAKMP: receives the payload type 20
234262: * 3 Feb 18:53:38: ISAKMP: receives the payload type 20
234263: * 3 Feb 18:53:38: ISAKMP (0:5912): NAT found, the node outside NAT
234264: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234265: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM3 = IKE_R_MM3234266: * 3 Feb 18:53:38: ISAKMP: (5912): lot of 93.73.161.229 sending my_port 500 peer_port 500 (R) MM_KEY_EXCH
234267: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234268: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM3 = IKE_R_MM4234269: * 3 Feb 18:53:38: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) MM_KEY_EXCH sport
234270: * 3 Feb 18:53:38: crypto_engine: package to decipher IKE
234271: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234272: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234273: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM4 = IKE_R_MM5234274: * 3 Feb 18:53:38: ISAKMP: (5912): payload ID for treatment. Message ID = 0
234275: * 3 Feb 18:53:38: ISAKMP (0:5912): payload ID
next payload: 8
type: 1
address: 192.168.1.218
Protocol: 17
Port: 500
Length: 12
234276: * 3 Feb 18:53:38: ISAKMP: (5912): peer games * no * profiles
234277: * 3 Feb 18:53:38: ISAKMP: (5912): HASH payload processing. Message ID = 0
234278: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234279: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234280: * 3 Feb 18:53:38: ISAKMP: (5912): SA authentication status:
authenticated
234281: * 3 Feb 18:53:38: ISAKMP: (5912): SA has been authenticated with 93.73.161.229
234282: * 3 Feb 18:53:38: ISAKMP: (5912): port detected floating port = 4500
234283: * 3 Feb 18:53:38: ISAKMP: attempts to insert a peer and inserted 95.6.../93.73.161.229/4500/ 47D305BC successfully.
234284: * 3 Feb 18:53:38: ISAKMP: (5912): IKE_DPD is enabled, the initialization of timers
234285: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234286: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM5 = IKE_R_MM5234287: * 3 Feb 18:53:38: ISAKMP: (5912): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
234288: * 3 Feb 18:53:38: ISAKMP (0:5912): payload ID
next payload: 8
type: 1
address: 95.6...
Protocol: 17
Port: 0
Length: 12
234289: * 3 Feb 18:53:38: ISAKMP: (5912): the total payload length: 12
234290: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234291: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234292: * 3 Feb 18:53:38: crypto_engine: package to encrypt IKE
routerindc #.
234293: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT (hw) (ipsec)
234294: * 3 Feb 18:53:38: ISAKMP: (5912): lot of 93.73.161.229 sending peer_port my_port 4500 4500 (R) MM_KEY_EXCH
234295: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234296: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM5 = IKE_P1_COMPLETE234297: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
234298: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE234299: * 3 Feb 18:53:38: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234300: * 3 Feb 18:53:38: ISAKMP: node set-893966165 to QM_IDLE
234301: * 3 Feb 18:53:38: crypto_engine: package to decipher IKE
234302: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234303: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234304: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234305: * 3 Feb 18:53:38: ISAKMP: (5912): HASH payload processing. Message ID =-893966165
234306: * 3 Feb 18:53:38: ISAKMP: (5912): treatment protocol NOTIFIER INITIAL_CONTACT 1
SPI 0, message ID =-893966165, his 480CFF64 =
234307: * 3 Feb 18:53:38: ISAKMP: (5912): SA authentication status:
authenticated
234308: * 3 Feb 18:53:38: ISAKMP: (5912): process of first contact.
dropping existing phase 1 and 2 with 95.6 local... 93.73.161.229 remote remote port 4500
234309: * 3 Feb 18:53:38: ISAKMP: (5912): node-893966165 error suppression FALSE reason 'informational (en) State 1.
234310: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
234311: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE234312: * 3 Feb 18:53:38: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234313: * 3 Feb 18:53:39: % s-6-IPACCESSLOGRL: registration of limited or missed rates 150 packages of access list
234314: * 3 Feb 18:53:39: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234315: * 3 Feb 18:53:39: ISAKMP: node set-1224389198 to QM_IDLE
234316: * 3 Feb 18:53:39: crypto_engine: package to decipher IKE
234317: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234318: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234319: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234320: * 3 Feb 18:53:39: ISAKMP: (5912): HASH payload processing. Message ID =-1224389198
234321: * 3 Feb 18:53:39: ISAKMP: (5912): treatment ITS payload. Message ID =-1224389198
234322: * 3 Feb 18:53:39: ISAKMP: (5912): proposal of IPSec checking 1
234323: * 3 Feb 18:53:39: ISAKMP: turn 1, ESP_3DES
234324: * 3 Feb 18:53:39: ISAKMP: attributes of transformation:
234325: * 3 Feb 18:53:39: ISAKMP: type of life in seconds
234326: * 3 Feb 18:53:39: ISAKMP: life of HIS (basic) of 28800
234327: * 3 Feb 18:53:39: ISAKMP: program is 61444 (Transport-UDP)
234328: * 3 Feb 18:53:39: ISAKMP: authenticator is HMAC-SHA
234329: * 3 Feb 18:53:39: CryptoEngine0: validate the proposal
234330: * 3 Feb 18:53:39: ISAKMP: (5912): atts are acceptable.
234331: * 3 Feb 18:53:39: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 95.6..., distance = 93.73.161.229,.
local_proxy = 95.6.../255.255.255.255/17/1701 (type = 1),
remote_proxy = 93.73.161.229/255.255.255.255/17/0 (type = 1),
Protocol = ESP, transform = esp-3des esp-sha-hmac (UDP Transport),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 0
234332: * 3 Feb 18:53:39: map_db_find_best found no corresponding card
234333: * 3 Feb 18:53:39: ISAKMP: (5912): processing NONCE payload. Message ID =-1224389198
234334: * 3 Feb 18:53:39: ISAKMP: (5912): payload ID for treatment. Message ID =-1224389198
234335: * 3 Feb 18:53:39: ISAKMP: (5912): payload ID for treatment. Message ID =-1224389198
234336: * 3 Feb 18:53:39: ISAKMP: (5912): ask 1 spis of ipsec
234337: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
234338: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_READY = IKE_QM_SPI_STARVE
234339: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234340: * 3 Feb 18:53:39: IPSEC (spi_response): spi getting 834762579 for SA
of 95.6... to 93.73.161.229 for prot 3
234341: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234342: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234343: * 3 Feb 18:53:39: crypto_engine: create Security Association IPSec (by QM)
routerindc #.
234344: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE (hw) (ipsec)
234345: * 3 Feb 18:53:39: crypto_engine: create Security Association IPSec (by QM)
234346: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE (hw) (ipsec)
234347: * 3 Feb 18:53:39: ISAKMP: (5912): establishing IPSec security associations
234348: * 3 Feb 18:53:39: from 93.73.161.229 to 95.6 SA... (f / i) 0 / 0
(93.73.161.229 to 95.6 proxy...)
234349: * 3 Feb 18:53:39: spi 0x31C17753 and id_conn a 0
234350: * 3 Feb 18:53:39: life of 28800 seconds
234351: * 3 Feb 18:53:39: ITS 95.6 outgoing... to 93.73.161.229 (f / i) 0/0
(proxy 95.6... to 93.73.161.229)
234352: * 3 Feb 18:53:39: spi 0x495A4BD and id_conn a 0
234353: * 3 Feb 18:53:39: life of 28800 seconds
234354: * 3 Feb 18:53:39: crypto_engine: package to encrypt IKE
234355: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT (hw) (ipsec)
234356: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234357: * 3 Feb 18:53:39: map_db_find_best found no corresponding card
234358: * 3 Feb 18:53:39: IPSec: rate allocated for brother 80000273 Flow_switching
234359: * 3 Feb 18:53:39: IPSEC (policy_db_add_ident): 95.6..., src dest 93.73.161.229, dest_port 4500234360: * 3 Feb 18:53:39: IPSEC (create_sa): its created.
(his) sa_dest = 95.6..., sa_proto = 50.
sa_spi = 0x31C17753 (834762579).
sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 1165
234361: * 3 Feb 18:53:39: IPSEC (create_sa): its created.
(his) sa_dest = 93.73.161.229, sa_proto = 50,.
sa_spi = 0x495A4BD (76915901).
sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 1166
234362: * 3 Feb 18:53:39: ISAKMP: (5912): lot of 93.73.161.229 sending peer_port my_port 4500 4500 (R) QM_IDLE
234363: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
234364: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_SPI_STARVE = IKE_QM_R_QM2
234365: * 3 Feb 18:53:39: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234366: * 3 Feb 18:53:39: crypto_engine: package to decipher IKE
234367: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234368: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234369: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
routerindc #.
234370: * 3 Feb 18:53:39: ISAKMP: (5912): node-1224389198 error suppression FALSE reason 'QM (wait).
234371: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
234372: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
234373: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234374: * 3 Feb 18:53:39: IPSEC (key_engine_enable_outbound): rec would notify of ISAKMP
234375: * 3 Feb 18:53:39: IPSEC (key_engine_enable_outbound): select SA with spinnaker 76915901/50
234376: * 3 Feb 18:53:40: IPSEC (epa_des_crypt): decrypted packet has no control of her identity
routerindc #.
234377: * 3 Feb 18:53:42: IPSEC (epa_des_crypt): decrypted packet has no control of her identity
routerindc #.
234378: * 3 Feb 18:53:44: IPSEC (epa_des_crypt): decrypted packet has no control of her identityAlso when I connect with the phone, I see HIS Active and IPsec tunnel is mounted, but the wire of time tunnel is down and phone connects.
I hope that you will help me. Thank you.
Hi dvecherkin1,
Who IOS you're running, you could hit the next default.
https://Tools.Cisco.com/bugsearch/bug/CSCsg34166/?reffering_site=dumpcr
It may be useful
-Randy-
Evaluate the ticket to help others find the answer quickly.
-
MY problem is that when the vpn is configured, and I try to run a tracert to one of my remote PC across the VPN, the VPN router sends information from the internet and do not attempt to open the tunnel. what I am doing wrong?
I use a cisco router 1700 and connect to a vpn concentrator 3030 Cisco
Current configuration: 1522 bytes
!
version 12.3
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
router host name
!
boot-start-marker
boot-end-marker
!
enable secret 5
!
MMI-60 polling interval
No mmi self-configuring
No pvc mmi
MMI snmp-timeout 180
No aaa new-model
IP subnet zero
!
!
!
IP cef
Max-events of po verification IP 100
!
!
crypto ISAKMP policy 9
BA 3des
md5 hash
preshared authentication
Group 2
ISAKMP crypto key (shared key) (peer IP address)
!
86400 seconds, duration of life crypto ipsec security association
!
Crypto ipsec transform-set esp-3des esp-md5-hmac TS1
!
crypmap 1 ipsec-isakmp crypto map
defined peer (IP ADDRESS of the peer)
game of transformation-TS1
match address 101
!
!
!
interface Ethernet0
IP (IP ADDRESS)
NAT outside IP
Half duplex
crypmap card crypto
!
interface FastEthernet0
IP (IP ADDRESS)
IP nat inside
automatic speed
!
the IP nat inside source 1 interface Ethernet0 overload list
IP classless
IP route 0.0.0.0 0.0.0.0 (default router)
no ip address of the http server
no ip http secure server
!
!
access-list 1 permit one
access-list 101 permit ip host (LOCALHOST using NAT) host (the remote host 1)
access-list 101 permit ip host (LOCALHOST using NAT) host (remote host 2)
access-list 101 permit ip host (LOCALHOST using NAT) host (the remote host 3)
access-list 101 permit ip host (LOCALHOST using NAT) host (the remote host 4)
!
!
Line con 0
line to 0
line vty 0 4
7 PASSWORD password
opening of session
!
end
Hi Jim
You must change the access list statement also the declaration of overloaded nat...
You must deny traffic between 2 vpn networks is natted...
You can check the below link configuration to the top of the same...
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a008009448f.shtml
regds
-
Hello
I use a software called TheGreenbow IPSec VPN Client to create a VPN to my RVS4000 tunnel. I have used this software for a long time with my old BEFSX41 router with no problems. My settings are almost identical to the parameters of the site Web of TheGreenbow: Guide of Config .
My problem is the following...
I have successfully created a tunnel. I can ping my devices on network without the drama. If I close that tunnel and attempt to open another, my client tells me that the tunnel is open, even if the router says it's down. I can't ping my network and my logs tell me I have an INVALID COOKIE error. I understand that this means that one of my endpoints using a SA which is no longer in use. Seems that the router is 'pending' on an old SA document. The only way I can solve this is to make a change (no change) to the router so that I have to press the button to save the changes. This seems to reset the router endpoint and the next tunnel I opened works correctly. It of fine when I'm at home and testing and may reset the router but impossible to deal with when I am on the road and actually use the tunnel.
Someone knows a problem like this before and have any advice on settings I can adjust to the problem?
Thanks in advance.
Milster
Sorry people I could have solved.
The router is new, so I checked the firmware version and there had been a number of updates to version my router supplied with. Improved v1.1.11 to v1.2.11 and initial test seems solid.
See you soon
Milster
-
problem setting up vpn site-to-site between asa and 1811 router
I get the following error.
3. January 8, 2008 | 15: 47:31 | 710003 | 192.168.0.45 | 192.168.0.50. TCP access denied by ACL to 192.168.0.45/3698 to LAN:192.168.0.50/80
3. January 8, 2008 | 15:47:28 | 710003 | 192.168.0.45 | 192.168.0.50. TCP access denied by ACL to 192.168.0.45/3698 to LAN:192.168.0.50/80
6. January 8, 2008 | 15:47:28 | 302021 | 192.168.0.45 | 192.168.0.50. Connection of disassembly for faddr gaddr laddr 192.168.0.50/0 192.168.0.50/0 192.168.0.45/1024 ICMP
6. January 8, 2008 | 15:47:28 | 302020 | 192.168.0.45 | 192.168.0.50. Built of ICMP incoming connections for faddr gaddr laddr 192.168.0.50/0 192.168.0.50/0 192.168.0.45/1024
5. January 8, 2008 | 15: 47:03 | 713904 | IP = public IP address, encrypted packet received with any HIS correspondent, drop
4. January 8, 2008 | 15: 47:03 | 113019 | Group = public IP address, Username = public IP address, IP = IP address public, disconnected Session. Session type: IPSecLAN2LAN, duration: 0 h: 00 m: 00s, xmt bytes: 0, RRs bytes: 0, right: Phase 2 Mismatch
3. January 8, 2008 | 15: 47:03 | 713902 | Group = public IP address, IP = public IP address, peer table correlator withdrawal failed, no match!
3. January 8, 2008 | 15: 47:03 | 713902 | Group = public IP address, IP = IP address public, error QM WSF (P2 struct & 0x4969c90, mess id 0xf3d044e8).
5. January 8, 2008 | 15: 47:03 | 713904 | Group = public IP address, IP = IP proposals public, IPSec Security Association all found unacceptable.
3. January 8, 2008 | 15: 47:03 | 713119 | Group = public IP address, IP = IP address public, PHASE 1 COMPLETED
6. January 8, 2008 | 15: 47:03 | 113009 | AAA recovered in group policy by default (DfltGrpPolicy) to the user = public IP address
4. January 8, 2008 | 15: 47:03 | 713903 | Group = public IP address, IP = IP address public, previously allocated memory release for authorization-dn-attributes
I do not think that because of the incompatibility of encryption. Any help is appreciated.
Thank you
Nilesh
You have PFS (Perfect Forward Secrecy) configured on the ASA and not the router. This could be one of the reasons why the tunnel fails in Phase 2.
If you do not need a PFS, can you not make a 'no encryption card WAN_map 1 set pfs' the configuration of the ASA and make appear the tunnel.
Kind regards
Arul
-
L2TP/IPSec connection failed for Windows 7 Ultimate for Windows Server R2 2012 with error 789.
For this preface, I use the server in a lab environment and trying to set up my own VPN L2TP/IPSec. I opened the UDP 500 and 1701 TCP ports on my router for the interface of the primary server where is the VPN. It is on a Comcast connection consumer where other applications such as Arma 3 servers dedicated and IIS have worked.
The RRAS role to run based on this tutorial: http://www.thomasmaurer.ch/2014/01/how-to-install-vpn-on-windows-server-2012-r2/ I have only strayed from it using DHCP forwarding instead of a static pool of IP as my router is running a DHCP server, and if I understand correctly, the router must give IP addresses of the internal IP pool which I use for everything else. I also use the PSK authentication rather than be based certificate. For the authentication of users I have MS-CHAP-V2 and CHAP enabled; I connect from the remote device with an account on that I created on the server for the purpose of this VPN I know RRAS connections are allowed.When the connection I get error 789: L2TP connection attempt failed because the security layer detected a processing error during initial negotiations with the remote computer. From what I've seen, this can be fixed by checking that the two ends of the connection are not behind a NAT (not an option), verification of the PSK (already done) and certificates (not applicable). If there is a way to solve this problem that would be great, but my server will always be behind a NAT firewall because the router is one, and the modem becomes one if several devices are connected to him without a router between the two.
This issue is beyond the scope of this site and must be placed on Technet or MSDN -
Cisco ASA 5505 VPN L2TP cannot access the internal network
Hello
I'm trying to configure Cisco VPN L2TP to my office. After a successful login, I can't access the internal network.
Can you jhelp me to find the problem?
I have Cisco ASA:
within the network - 192.168.1.0
VPN - 192.168.168.0 network
I have the router to 192.168.1.2 and I cannot ping or access this router.
Here is my config:
ASA Version 8.4 (3)
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 198.X.X.A 255.255.255.248
!
passive FTP mode
permit same-security-traffic intra-interface
the net-all purpose network
subnet 0.0.0.0 0.0.0.0
network vpn_local object
192.168.168.0 subnet 255.255.255.0
network inside_nw object
subnet 192.168.1.0 255.255.255.0
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access deny ip any any newspaper
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sales_addresses 192.168.168.1 - 192.168.168.254
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT dynamic interface of net-all source (indoor, outdoor)
NAT (inside, outside) source inside_nw destination inside_nw static static vpn_local vpn_local
NAT (exterior, Interior) source vpn_local destination vpn_local static static inside_nw inside_nw-route search
!
network vpn_local object
dynamic NAT interface (outdoors, outdoor)
network inside_nw object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 198.X.X.B 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
IKEv1 crypto ipsec transform-set my-transform-set-ikev1 esp-3des esp-sha-hmac
transport in transform-set my-transform-set-ikev1 ikev1 crypto ipsec mode
Crypto-map Dynamics dyno 10 set transform-set my-transformation-set-ikev1 ikev1
card crypto 20-isakmp ipsec vpn Dynamics dyno
vpn outside crypto map interface
Crypto isakmp nat-traversal 3600
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 30
Console timeout 0
management-access inside
dhcpd address 192.168.1.5 - 192.168.1.132 inside
dhcpd dns 75.75.75.75 76.76.76.76 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal sales_policy group policy
attributes of the strategy of group sales_policy
Server DNS 75.75.75.75 value 76.76.76.76
Protocol-tunnel-VPN l2tp ipsec
user name-
user name-
attributes global-tunnel-group DefaultRAGroup
address sales_addresses pool
Group Policy - by default-sales_policy
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:5d1fc9409c87ecdc1e06f06980de6c13
: end
Thanks for your help.
You must test with 'real' traffic on 192.168.1.2 and if you use ping, you must add icmp-inspection:
Policy-map global_policy
class inspection_default
inspect the icmp
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
default DNS does not not in l2tp/ipsec
Hi all
We have Setup l2tp on asa, everything works except the default domain that is not defined. This is necessary because all the links does not provide full dns:
It's cisco config:
IP mask 255.255.255.224 local pool ClientVPNAddressPool 172.16.31.1 - 172.16.31.32
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set TRANS_ESP_3DES_SHA TRANS-ESP-3DES-MD5 ikev1
card crypto PublicTESA_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
PublicTESA_map PublicTESA crypto map interface
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server DNS X.X.X.X Y.Y.Y.Y
Protocol-tunnel-VPN l2tp ipsec
value by default-field AAA. BBBBBBB
the address value ClientVPNAddressPool pools
It's windows ipconfig/all:
Useful PPP VPN from Cisco ASA :--> name of the connection
Sufijo DNS specific para the conexion. . :--> suffix DNS specific connections (in WHITE)
Descripción...: Cisco ASA VPN--> description
Dirección física... :--> physiqueet address
DHCP enable...: don't--> active dhcp
Automatica habilitada... config: if--> active auto config
172.16.31.1 (Preferido) IPv4 address... :--> IP address
Subred... mascara:--> netmask 255.255.255.255
Puerta of enlace... by default: 0.0.0.0--> default GW
Servidores DNS...: X.X.X.X--> dns servers
Y.Y.Y.Y
Sober NetBIOS TCP/IP...: enable--> net bios on tcp active
Thank you!
Hi Jose,
L2TP over IPsec will not be able to receive the DNS suffix.
This is a limitation of the PPP. More information:
http://cdetsweb-PRD.Cisco.com/apps/dumpcr?identifier=CSCse74376&parentprogram=QDDTS
Marcin
-
Windows Error VPNC3005 "unauthorized tunneling protocol" L2TP/IPSec
I'm trying to implement a vpn L2TP/IPSec to a concentrator 3005. Everything seems to work (phase 1 completed, PHASE2 full, updated tunnel, the session began and the user is authenticated with the RADIUS) but then the tunnel fell with the message "unauthorized tunneling protocol. What causes this message?
At one point the tunnel remained upward and running, but later I tried again and it failed. I don't remember changing anything in the config right.
I read somewhere that I should turn on "L2TP over IPSEC" in the group but this disables the IPSEC option and it seems to me that I need IPSec for Cisco vpn clients that need to connect.
Any suggestions?
Change the base group to allow l2tp/ipsec; Check if l2tp is enabled at the global level.
-
Support for L2TP/IpSec VPN on 1921
Hello
I am not able to find an answer on something very simple... Fact of 1921 Cisco router supports L2TP/IpSec VPN connections? (from Windows 7 clients)
If she could please point me to the right location/document where I can read more about it.
I already tried with the configuration below, but command ppp under a virtual-Template1 don't output interface.
Thank you very much for your answers.
Kind regards
Herman
# VPN configuration I've tried, but it did not work.
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
life 4000
ISAKMP crypto key xxxxxxx address X.X.X.X (ip strongvpn)
!
!
Crypto ipsec transform-set ESP-AES256-SHA1 esp - aes 256 esp-sha-hmac
transport mode
!
Map 10 IPSEC L2TP ipsec-isakmp crypto
defined peer X.X.X.X
game of transformation-ESP-AES256-SHA1
match address 101
!
!
!
Pseudowire-class pwclass1
encapsulation l2tpv2
local IP interface FastEthernet0/0
PMTU IP
!
!
!
!
interface FastEthernet0/0
DHCP IP address
automatic duplex
automatic speed
card crypto IPSEC L2TP
!
interface FastEthernet0/1
IP 10.20.20.1 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
interface Serial0/0/0
no ip address
Shutdown
!
interface Serial0/1/0
no ip address
Shutdown
2000000 clock frequency
!
virtual-PPP1 interface
the negotiated IP address
IP mtu 1399
NAT outside IP
IP virtual-reassembly max-pumping 64
No cdp enable
PPP authentication ms-chap-v2 callin
PPP chap hostname vpnxxx
PPP chap password 0 xxxxxxxxxx
Pseudowire pw-class 1, pwclass1 X.X.X.X
##################################################################################################################
Cisco-gw #show version
Cisco IOS software, software C1900 (C1900-UNIVERSALK9-M), Version 15.2 (4) M2, VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Updated Thursday, November 7, 12 and 12:45 by prod_rel_team
ROM: System Bootstrap, Version 15.0 M16 (1r), RELEASE SOFTWARE (fc1)
Cisco-gw uptime is 2 days, 4 hours, 22 minutes
System to regain the power ROM
System restart to 09:11:07 PCTime Tuesday, April 2, 2013
System image file is "usbflash0:c1900 - universalk9-mz.» Spa. 152 - 4.M2.bin.
Last reload type: normal charging
Reload last reason: power
This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.
A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html
If you need assistance please contact us by mail at
Cisco CISCO1921/K9 (revision 1.0) with 491520K / 32768K bytes of memory.
Card processor ID FCZ170793UH
2 gigabit Ethernet interfaces
1 line of terminal
1 module of virtual private network (VPN)
Configuration of DRAM is 64 bits wide with disabled parity.
255K bytes of non-volatile configuration memory.
249840K bytes of Flash usbflash0 (read/write)
License info:
License IDU:
-------------------------------------------------
Device SN # PID
-------------------------------------------------
* 0 CISCO1921/K9
Technology for the Module package license information: "c1900".
-----------------------------------------------------------------
Technology-technology-package technology
Course Type next reboot
------------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
Security securityk9 Permanent securityk9
given none none none
Configuration register is 0 x 2102
Yes, it is supported.
It is necessary to configure the encapsulation under virtual-model.
Note: you will have much better results by using the IPSec VPN or SSL VPN client AnyConnect client.
-
Microsoft l2tp IPSec VPN site to site ASA on top
I have a specialized applications casino that requires end-to-end encryption. I'm under the stack of Microsoft IPSec l2tp between my XP machine and my Windows 2003 server on the LAN. Can I use the same type of protocol stack Microsoft l2tp IPSec between my XP machine and the Windows Server 2003 a branch on the SAA to site to site ASA VPN tunnel? The VPN site-to site ASA is a type of key Preshare IPSec VPN tunnelle traffic between our head office and a branch in distance.
In other words, the ASA site-to-site IPSec VPN will allow Microsoft l2tp through IPSec encrypted traffic? My ACL tunnel would allow full IP access between site. Something like:
name 192.168.100.0 TexasSubnet
name 192.168.200.0 RenoSubnet
IP TexasSubnet 255.255.255.0 RenoSubnet 255.255.255.0 allow Access-list extended nat_zero
Hello
Yes, the L2TP can be encapsulated in IPSEC as all other traffic.
However, make sure that no NAT is performed on each end. L2TP is a default header protection which will see NAT as a falsification of package and reject it.
See you soon,.
Daniel
-
Windows 7 64 bit ultimate - VPN L2TP does not
Hello
On a brand new with windows 7 64 bit ultimate laptop, I set up a VPN L2TP connection but it still fails with error 789.
On the same network, I have an XP machine that connects to the remote gateway even.
After a long search, here's what I did:
1. Add a Dword AssumeUDPEncapsulationContextOnSendRuleregistry in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PolicyAgentand set it to 2 as shown in the MS KB - http://support.microsoft.com/kb/926179
2. set correctly the two political generation of IPSEC Agent & key services
3 reboot several times the PC
4. to pass the local gateway connecting directly to the ISP
Nothing works.
On the XP machine, it runs immediately without problem: same gateway, local gateway, remote and local network, access, etc...
Any help will be greatly welcome!
Thank you.
Have you tried to delete / create the VPN connection again?
-
Cisco VPN Client and Windows XP VPN Client IPSec to ASA
I configured ASA for IPSec VPN via Cisco VPN Client and XP VPN client communications. I can connect successfully with Cisco VPN Client, but I get an error when connecting with the XP client. Debugging said "misconfigured groups and transport/tunneling mode" I know, they use different methods of transport and tunneling, and I think that I have configured both. Take a look at the config.
PS a funny thing - when I connect with client VPN in Windows Server 2003, I have no error. The only difference is that client XP is behind an ADSL router and client server is directly connected to the Internet on one of its public IP of interfaces. NAT in the case of XP can cause problems?
Config is:
!
interface GigabitEthernet0/2.30
Description remote access
VLAN 30
nameif remote access
security-level 0
IP 85.*. *. 1 255.255.255.0
!
access-list 110 scope ip allow a whole
NAT list extended access permit tcp any host 10.254.17.10 eq ssh
NAT list extended access permit tcp any host 10.254.17.26 eq ssh
access-list extended ip allowed any one sheep
access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.121.0 255.255.255.0
flow-export destination inside-Bct 192.168.1.27 9996
IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
ARP timeout 14400
global (outside-Baku) 1 interface
global (outside-Ganja) interface 2
NAT (inside-Bct) 0 access-list sheep-vpn
NAT (inside-Bct) 1 access list nat
NAT (inside-Bct) 2-nat-ganja access list
Access-group rdp on interface outside-Ganja
!
Access remote 0.0.0.0 0.0.0.0 85.*. *. 1 2
Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
dynamic-access-policy-registration DfltAccessPolicy
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-md5-hmac vpnclienttrans
Crypto ipsec transform-set vpnclienttrans transport mode
Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
life crypto ipsec security association seconds 214748364
Crypto ipsec kilobytes of life security-association 214748364
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
card crypto interface for remote access vpnclientmap
crypto isakmp identity address
ISAKMP crypto enable vpntest
ISAKMP crypto enable outside-Baku
ISAKMP crypto enable outside-Ganja
crypto ISAKMP enable remote access
ISAKMP crypto enable Interior-Bct
crypto ISAKMP policy 30
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
No encryption isakmp nat-traversal
No vpn-addr-assign aaa
Telnet timeout 5
SSH 192.168.1.0 255.255.255.192 outside Baku
SSH 10.254.17.26 255.255.255.255 outside Baku
SSH 10.254.17.18 255.255.255.255 outside Baku
SSH 10.254.17.10 255.255.255.255 outside Baku
SSH 10.254.17.26 255.255.255.255 outside-Ganja
SSH 10.254.17.18 255.255.255.255 outside-Ganja
SSH 10.254.17.10 255.255.255.255 outside-Ganja
SSH 192.168.1.0 255.255.255.192 Interior-Bct
internal vpn group policy
attributes of vpn group policy
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
BCT.AZ value by default-field
attributes global-tunnel-group DefaultRAGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
Hello
For the Cisco VPN client, you would need a tunnel-group name configured on the ASA with a pre-shared key.
Please see configuration below:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
or
Please see the section of tunnel-group config of the SAA.
There is a tunnel-group called "rtptacvpn" and a pre-shared key associated with it. This group name is used by the VPN Client Group name.
So, you would need a specific tunnel-group name configured with a pre-shared key and use it on the Cisco VPN Client.
Secondly, because you are behind a router ADSL, I'm sure that's configured for NAT. can you please activate NAT - T on your ASA.
"crypto isakmp nat-traversal.
Thirdly, change the transformation of the value
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
Let me know the result.
Thank you
Gilbert
-
VPN L2TP does not / / Android 4.4.3
My vpn connection does not work.
The installer is: L2TP/IPSec with PSK in my network private.
Given that my old phone (Xperia S), located on android 4.3.X, still works
I see no problem of configuration, but I guess that it is a problem with android 4.4.XThe same problem occurs on my sony tablet z since the update to 4.4.X
Is there any fix from sony?
I read on a google fix, that should be in place on the 4.4.4, version but updated for 4.4.4 on the
Tablet does not solve this problem.We got a test account of another user with this issue and have found the cause of this. It will be fixed in a future software update.
Maybe you are looking for
-
I bought new Toshiba Satellite A665-14F. CPU i7 RAM 4 GB, HDD 640 GB My problem is that my laptop is not responding during startup, everything I opened will not respond. Thoght even my friend has an i5 CAREB 6 GB of Ram and 750Go. It is portable star
-
As Norton causes more problems, which AV program do you use and why do you prefer?
-
unexpected Windows media player could be due to configuration errors
When I play any radio station or show, I can't here interference of music and talk very little. It can be picking up music besides. More on a radio station, its low loss? Thank you
-
When I put a movie on a cd it will not play on my dvd player
When I did a movie using windows movie maker, when it comes to play on my dvd player it will not work?
-
Update drivers for Windows XP acer laptop aspire 5012wlmi.
Original title: drivers updates. updated all the drivers on acer laptop aspire 5012wlmi, how about this topic and what I pay these updates?