PROBLEM TO CONNECT DIRECTLY TO THE INTERNET

Similar Questions

• Controller of domain and DNS behind RRAS without VPN connected directly to the internet with a Cisco router

  I hava a ME Cisco 3400 with physical single port available for a cable connection.

  The ISP give me an IP address interface = 89.120.29.89 to act as a gateway to the IP Address of the host, which is provided for in the order 89.120.29.90.

  The host computer is a dual Xeon computer with two NICs for LAN and WAN.

  Fields of application: to install a windows 2008 R2 between public and private network server.

  Even though I know it's not recomanded, I put the DNS role and directories Active Directory roles installed on the same computer, the computer above, (I do not have enough computer for roles different place on different computers)

  The desired configuration:

  To have installed with his roles behind a WS2008R2 has RRAS. without a VPN.

  b with VPN

  and for WAN access for the client computers of the private LAN Windows 7 OS. (The basin of LAN address 192.168.0.1 - 255).

  First step : to have internet access in the browser (I use Google chrome) (without taking into account the DNS and AD)

  Network configuration:

  Map NETWORK WAN, at the top of the stack of liaison in the Control Panel/network connections and sharing:

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  OK, I can browse the internet.

  Second stage. (Consider DNS and Active Directories)

  DNS instaled role for this computer.

  AD installed as a global catalog.

  NETWORK WAN server that is directly connected to the Cisco router:

  Conection area 3

  Properties:

  Client for Microsoft Netwaork: not verified

  Network Load Balancing: not verified

  File and shared printer: not verified

  QoSPacketScheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: not verified

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: not verified;

  Use this connection DNS suffix in DNS registration: not verified;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: don't check;

  Disable NetBios on TCP IP: checked;

  Connection to the local network 2

  Properties :

  Client for Microsoft Netwaork: checked

  Network Load Balancing: no

  File and shared printer: checked

  QoS Packet Scheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4 checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  NETWORK LAN CARD: 192.168.0.101

  Mask: 255.255.255.0

  Gateway: 192.168.0.1

  under Advanced tab:

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: check;

  Disable NetBios on TCP IP: not verified;

  Install RRAS as NAT (NAT) under any condition imposed by DHCP(not installed) in ideea that RRAS will generate the private IP address of the DHCP allocator.

  In any case, for the beginning, I have a fix IP, do not get IP automatically.

  At this point, it gets the configuration simple posible for RRAS follows:

  3, LAN connection that corespond to the WAN interface IP:

  "NAT configured for the following Internet interface: Local Area Connection 3.
  The clients on the local network will assign the IP addresses of the following range:

  network address: 192.168.0.0. netmask 255.255.0.0.

  After Windows RRAS are open:

  The Network Interfaces tab:

  NICs are enabled and connected;

  UAL remotely & policies:

  Launch NPS,

  on the NPS server tab:

  Allow access to successful Active Directory directories:

  Properties: authentication: port 1812,1645

  kept port 1813,1646;

  on the accounting tab: nothing;

  under NPS policies:

  Grant permission for the RRAS server under builin\Administrator of the accounts;

  On strategy and the type of server unspecified (NAT do not exist as an entry in the drop-down list server dwn)

  under the static road: nothing;

  under the IPv4 tab or both are there(there IP) and are up

  under NAT

  Connection to the local network 3: public interface connected to the internet

  enable NAT on this interface:

  under the address pool: ISP addresses public;(two addresses)

  under the terms of service and the ports: Web server: http 80.

  (I have I have a static IP address for the client computer in mind, I set up a single customer).

  At the client computer :

  configured as domain customer and added to the users AD and computer AD

  logon to the domain:

  Local Area Connection

  Properties:

  Client for Microsoft Netwaork: checked

  Network Load Balancing: not verified

  File sharing and printer: checked

  QoS Packet Scheduler: checked;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 192.168.0.101

  Mask: 255.255.0.0

  Gateway: 192.168.0.1

  DNS: (auto-add the same to the local machine).

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: checked;

  Disable NetBios on TCP IP: not verified;

  right now the 192.168.0.101 client cannot connect to internet through RRAS.

  ;

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows removes the internet conntction system. Connected directly to the modem. Have tried to go through just wifi. the same problem. Only happened for several weeks.

  Windows deletes internet conntction after a few minutes. The netgear and control panel says I'm always connected. Must reboot to get reconnected to the windows system. Connected directly to the modem. Have tried to go through just wifi. The same problem. Only happened for several weeks.

  Hi Sailortdt,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description, it looks like you are facing a problem with network connectivity.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• E2700 cannot connect directly to the modem, but connects via another wifi router?

  I have a Netgear WNDR3700v2 that I was very pleased until I had a nest of thermostat. Apparently it's a router not supported and I had to change it. I bought an E2700 since he took charge, but I have a huge dilemma...

  If I connect the linksys directly to the modem, I don't get an internet connection. I got out and renewed IPs without success...

  But if I wired the linksys for the netgear, I get a good solid internet connection. problem is, I have no need for installation of 2 routers on top of each other...

  any suggestions? I would like to know what kind of information you need.

  Basically, I do not understand why he is not able to connect directly to the modem to linksys. Yet, it becomes solid connection wired through another router.

  I use Comcast and South FL. it is motorola surfboard modem

  OK, found the solution.

  call 1800COMCAST

  go to the problems of the internet, there is an option to send a refresh signal to your modem.

  I did, and it started working. I guess that clears the memory and binds to the new MAC address...

  After that I did, internet is back. I hope this will be useful to someone. I was ready to return the dang thing.

• How can I reset or fix my router wireless or (lost the ability to connect wirelessly to the internet) access point

  Wireless hub works, other computers are connected

  On a laptop, I lost the ability to connect wirelessly to the internet (message: limited connectivity)

  Recommended by the system solution: reset or repair your access point or wireless router

  How can I do?

  I think that what you aim for is "power cycle".

  To do this, simply unplug the router/access point power adapter. Wait a minute. Then reconnect it.

  Hope this helps

  Post back if necessary

  ___________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Download directly from the Internet to the directory podcast Clip3

  Is it possible toDownload directly from the Internet to the podcast Clip3 on the device directory. I have on my old Samsung mp3 player.

  Thanks in advance

  Files on the Clip + can be seen under mode ID3 (such as the podcasts folder) or folder view.  They are not physically twice.

  As to not see the files of clips on your computer:

  When your player is connected to your computer using USB MSC (set under settings of the player), your computer only see files that had been moved to the drive when the drive is connected in MSC mode.  Similarly with regard to the MTP mode.  However, all the files appear and can be played on your player, under some USB mode setting.

  A reason why some people prefer to set the USB Mode on their player to MSC or MTP: setting Auto, the Player tries to connect in MTP mode but then you will return in MSC mode if the connection of the MTP does not; as a result, you can have a mixture of MSC and MTP mode transferred the files to your drive, making some of them isn't visible on your computer without going to the other USB mode.

  Because MSC mode is more universal (playing with a wide range of operating systems, including Linux and on Mac, and without the need for Windows Media Player on the computer), some people prefer MSC mode.  However, note that the DRM (digital rights management) files need MTP mode - they will not transfer enough (the DRM license will not transfer) in MSC mode.

• Apears the symbol "#" in the direction of the internet in the browser

  Hello world

  I don't know why, but when the request arrival load a symbol ' # ' appears in the direction of the internet in the browser, and I have no idea how to fix this.

  Could someone help me please? Thank you

  Sebastian Toro

  Guys,

  First of all it is not a problem, but characteristic. It is used for the management of the history. When the application load the browser url is added with "#" to designate it as the page root. Later, we can use setFragment BrowserManager method to set the url to something else (e.g. #page = reports). It is then used for the management of the back and button next to the browser. This feature is called DeepLinking. You can read about it in the Flex docs.

• HP 15 Notebook PC: Laptop stops to connect wireless to the internet

  Laptop not connect wireless to the internet.  In this intermittent case. Called HP several times. Will work and then happen again!

  My computer still under warranty.

  Hi @Hoopla1 ,

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediatelyassist you with the wireless card.

  Thank you.

• Can I use MSTSC to connect remotely on the internet?

  Can I use MSTSC to connect remotely on the internet (local computer is Vista Ultimate SP2 to a distance Win 2003 Server)? I used MSTSC on my local network and it works well.

  Hi Ibaltsae!

  Thanks for posting. Yes, you can use MSTSC to connect remotely to a computer or server on the internet, the same as if you were using your local network. To connect to the remote computer, use the DNS or public IP that are associated with name.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Question about creating report guests editor BI when it connects directly to the database?

  Hello

  I create a report of BI Publisher using direct SQL server database. JDBC connection is created, then datamodel and report.

  The report is parameterized. Now I have attached the dashboard report. But now the settings are not filling. So I intend to create guests, but it is the search for field. But I don't use of RPD. So, how can I create guests when we creating BI publisher report connecting directly with the database? Please let me know.

  Kind regards
  Sam

  Hi Sam,

  I hope you got your answer for that starting from the thread OBIEE quick dashboard for BI Publisher

  Thank you...

• How to connect directly to the DB

  It is possible to create a form to so as to not ask for user/pass/database each time that you use, but by connecting directly to the DB? I mean, it is possible to write something in the form that I know not to put directly within the user/pass/basic form of data instead of ask for it every time?
  Thank you!

  Hello

  for this, we must change formsweb.cfg
  Just add the following to the configuration section.

  [Your_config]
  userid=user/pwd@connect
  

  Sarah

• ESXi directly on the internet?

  All,

  First off I understand the need for firewalls and what not. There is a business need for it.

  Does anyone put ESXi directly on the internet? What kind of exploits have been seen? When I say put live on the net, I also talk about management. Ive expressed my displeasure with that idea but I've been invited to explore more.

  Thank you!

  Ryan

  Virtual NETWORK adapter on the public network is ok, if it's on different vSwitch management.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• First 10 Elements must be connected permanently to the Internet to work? *

  First 10 Elements must be connected permanently to the Internet to work?

  N ° but there are a number of features that will be beneficial to have an internet connection.

• Problems when trying to access the Internet using the connection to the network wiressless

  Original title: via a wireless router problem.

  I have a problem of signing on the internet through a Linksys WRT54G2V1 wireless router model. I use Windows Vista Service Pack 2. When I start my computer, it is not the sign on the internet, even if it is connected to the wireless router. After I unplug the router for 20 seconds and then plug it in again, my computer will sign it on the internet. In the meantime, my wife's computer has no problem signing on the internet via the wireless router. What should I do to fix my sign on the problem?

  Hello

  
  Did you make any changes before the show?
  Method 1:

  You can see the following link.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  
  Method 2:
  You can try to disable temporary Windows Firewall and check. Check out the following link.
  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  NOTE: turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  Method 3:
  You can try resetting the TCP/IP stack.
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions yourself.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
   
  See also:
  You can follow the steps mentioned in the link.
  Network adapter problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  It will be useful.

• Anyone else had problems with the connection switched to the internet automatically? More details

  I had this problem since the first part of January 2011. I use a dial-up connection, I have windows vista home Premium 32 bit. I can click on the internet icon on my desktop what the little box that has a checkbox to automatically connect to the internet, the diallog which is supposed to have the name of the internet connection is empty, it tries even to compose, but he does not open the port to dial an outside line. All the time I have a tick on my tab internet connections dial options each time that a network connection is not present or always dial my connection default slot choose settings if you need to configure a proxy server for a connection, it will not work on one, I can manually connect using of these (one at a time) but every time I click on the internet icon does not recognize a connection already exists, I get this message telling me that I need to connect to the cause of the internet, I work in offline mode. Whenever I get that message I click on connect to go online then it trying to connect automatically by calling and then I get this message, it cannot establish a dial-up access and still it does not open the port to dial an outside line.

  I can connect manually using the same connection and put the check box on the never dial a connection under select parameters if you need to configure a proxy server for a connection on the connections to internet options tab and I don't have a problem connecting to the internet. I did a reset and set up a new connection and that didn't work either.

  The Connection Wizard recalled the correct information, it was not correct that then I would not use this same computer online now. The reason is that I am currently using the same computer that has the problem of not being able to connect to internet automatically online. This same computer that has the problem of not being able to connect to the internet automatically, it will connect manually using exactly the same ISP configuration by routing the connection in order to never establish a connection on the internet connections tab options, while I'm on dial upward, it is assumed to be always dial my default connection under choose settings If you need to configure a proxy server.

  I have windows Vista Home premium 32-bit with service pack 2