Problem with < > < / access >

Similar Questions

• I had problems with access to most of the Web sites and I noticed that HTTPS is no longer, how do I make permanent HTTPS so I can access any Web site?

  I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.

  My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• Problems with access to Web sites in the laptop of my mother, both wireless and ethernet connections

  Original title: Internet issues

  My mother's laptop has suddenly stopped to access Web sites. I tried to explore, Firefox and Chrome using both wireless and ethernet... connections we both century link and I tried the two houses... my works laptop on both networks. All three browsers connect to the internet, but not all pages opens. I ran the store and he told me that I should look online for more help... which is not the case, but it cannot determine the problem. Any ideas?

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with access to Web sites. We apologize for the inconvenience caused to you and appreciates your efforts to try to resolve the problem.

  I would like to know the details below to help you better

  1. Do you receive an error message/code when you access Web sites?
  2. Do you think that any symbol with exclamation on the icon of this internet access on the taskbar (right)?

  I ask you to try the steps in the Microsoft Help article below and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Also I ask you to reset TCP/IP and check if it helps.

  How to reset TCP/IP using the NetShell utility
  http://support.Microsoft.com/kb/299357/en-us

  Keep us updated on the issue to help you better.

• Problem with access policies (create several resources)

  I'm having a problem with access policies:
  
  The first policy must create a resource.
  And the following policies should create childs on the resource.
  
  The problem here is that when the policies will add the childs, the resource is not configured yet.
  And then each will create a resource but I want just a single resource of the childs.
  
  
  When the resource is already deployed, policies to update this resource correctly.
  
  How can I fix?
  
  TKS

  Ricardo,

  I had a similar problem. In a post processing Manager, I managed the membership of the user to specific through the removeMemberUser roles and the addMemberUser of the tcGroupOperationsIntf class.
  The last parameter of this method is a Boolean value that, if true, would automatically trigger access by programming strategies in post processing.
  The problem is that there also is an OOTB handler for triggering access rules, so I was basically triggering twice access policies and duplicate resources appear.

  I hope this helps.

  See you soon

• Adobe Flash Player 12 creates problem with access setting Kaltura

  After installing Flash Player 12, I have the following screen: problem with Kaltura ' cannot access the settings of.
  (Have screen shot, but it can not paste here...)

  ***************
  Looks like:
  Captions Settings
  FONT      SIZE
  Stroke  ON
  Background OFF
  SAVE CANCEL
  
  ******************

  The video plays, but with this window in the middle of the image. Just happened after the update.

  Jean-Jacques,

  You can download an image by clicking on the button Browse located below the reply box...

  It would help a lot for help you.

  From what I understand of the posted link iamjayakumars, Flash 12 beta will install updates in the background, but I think there could be a feature that users can configure to install Flash when they want to and not automatically push it to users.

• Problems with access to the internet - suspected hardware conflict (IP address)?

  Hello

  I wonder if you could help out me?

  I have problems with internet access on a wireless router with what appears to be a conflict between three different pieces of equipment.

  I have a laptop running Windows 7 & an Ipod Touch which access entered it internet without any problem on a Belkin 54 g wireless router.

  Everytime I turn on my Windows Vista desktop PC, both devices 'hang up' (not the o/s of just no internet access) desktop PC seems to have access to internet at the outset and then access toggle on and outside.

  I then shut down the PC and reset before internet access wireless router is available on the portable computer and the IPOD Touch. I find it very frustrating, because I want that all three devices to be able to access the internet at the same time.

  An error message came up initially on the laptop, marking an IP address conflict. I paid for for a guru PC "told" to come take a look at this - he made some changes to the IP address of the desktop computer, then it wouldn't be anywhere near the addresses of the other 2 devices, but this seems not to have solved the problem.

  Can you please specify? Any help would be welcome!

  Thank you very much

  Rob Fleetwood.

  Hello

  Method 1:

  I suggest you follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you follow the link and check.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 3:

  I suggest you follow the link and check.

  Get help with the message "There is an IP address conflict"

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-there-is-an-IP-address-conflict-message

• Problem with access: local only for wireless in Vista

  A few weeks ago, we got a new router at home. It works fine, but a few days ago, my computer suddenly could no longer access the internet wireless on this subject. (He had been able to before). Other computers in the House can use it for the wireless, and my computer can get on the internet by cable. My computer can also access wireless to other places, but not at home, and more.

  So far, I tried everything what I found on the internet to solve the problem without success. I tried:

  1. the solution proposed on this page http://support.microsoft.com/kb/928233.

  2. make sure that windows is completely updated.

  3 disable IPv6 and IPv4 (although not at the same time).

  4 turn off the power management feature that allows the computer to turn off the wireless card.

  5. disabling and re-enabling the network card.

  so far, nothing has worked. Can someone, please?

  Hello

  In most cases, this problem is created by the problem with wireless security.

  Try to connect with the security temporarily turned off.

  Or firewall blocking local traffic.

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• My wireless on my laptop network card has stopped working. Error: problem with access point or network adapter.

  The message bed "problem with the network adapter or access point.  Is there anyway to solve this because convenience store could not.

  Hello

  1 did you change on your computer before this problem?

  2. What is the brand and model of your computer?

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the procedure in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2

  Check to see if the problem exists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

• I have a problem with access to a Web site on the computer.

  I just had to Comcast replace a defective modem/router this morning & now there's a site I can't access it on my desk. I can access it fine without thread through my Smartphone or tablet. But not through my office. I have no problem with all other sites as far as I KNOW

  I managed to find the cause of my own. There is no error message, no timeouts. Just went to a blank window. I have disabled the Microsoft Virtual WiFi Miniport card & Realtek PCIe FE Family controller & it solved the problem

• Problem with access to WV and HAVE

  So I see a few problems with the two Appstacks and writeable volumes in 2.5.0 which I think relate just a matter of what needs to be changed.

  • Writable volumes
    • I have 2 accounts for my account that I attributed an accessible volume writable on a specific system.  When I log in the system in question that subscribe to the Windows profile Service is unable to load.  If I am in the same system with my secondary account on the same system I have no problem.  If I kill the accessible volume writable in the Manager of that then I can login with my account first without problem.
    • I checked that I have no profile on the system, because it is a fresh charge and I use a local administrator account to join to the domain.
  • App stacks
    • If I attached a test battery to a provisioning system and try to install the software I could not create the directory "C:\Program Files (x 86) \Cryptophane" error 5: access is denied.  As soon as I cancel the commissioning Manager of installation of the software is complete without problem.

  The service account, I'm under Manager of appVolumes as the role of the admin

  If I connect to vcenter I can watch the virtual machine and see that the volumes are attached to the virtual machines in question.

  I tried several versions to see if there is something defined in Windows which is causing the problem.

  If a solution has been found.  It turns out a GPO has been the cause of the problem.  Once I added my test machines to an exclusion it resolved the problem.

  The policy in question contains the following settings that were the culprit

  Access to the removable storage / system

  • All removable storage Classes: deny all access-enabled
  • WPD Devices: Deny access read-enabled
  • WPD Devices: Deny access to write-enabled

  Is about to test an App stack, but this seems to be the culprit.

• Potential problems with access to 10g EUL with 4i discoverer desktop?

  Hi all
  
  We have recently upgraded to Discoverer 10 g of 4i and still have a number of computers of the users with the old 4i desktop client. They have the ability to access the 10g EUL using the 4i client and I would like to know of any potential problem with them doing so.
  
  Thanks in advance, and any comments would be greatly appreciated.

  Hello
  A 4i Desktop cannot access a 10g EUL. When you did the upgrade you probably enriched by using the same schema, alias name of EUL.

  What's happened is that Discoverer 10 g installed a brand new 10g EUL in the same schema. 10 GB objects that all start with EUL5, the discoverer 4i objects while all begin with EUL4. The upgrade was non-destructive, which means that your old 4i posts clients and Desktop 10g clients can coexist, however they not have access the EUL even. 4i clients will connect to the old discoverer EUL 4 and your new or those connecting through a URL, will be connected to the 10g EUL. Any changes made in one as all new workbooks will not appear in the other.

  If you are satisfied with the upgrade, you must install Discoverer 10 g Desktop on any machine that still has access by computer, and then remove the installation 4i. If you want everyone to use a browser to connect you need to uninstall all versions of office 4i.

  In addition, if you have many versions of office you use is no longer, you should ask your Oracle sales representative if they will convert these licenses in other licenses for you. You paid good money for them and they are still valid as long that you have to pay the annual maintenance and support. Some sales representatives do not realize that it can be done.

  Hope this helps explain

  Best wishes
  Michael

• problem with access point or wireless adapter, a network cable is not plugged in correctly or may be broken

  I recently purchased the 8 Envy Touchsmart PC Notbook HP windows. Immediately I put in place, and everything worked well - even on the Internet, unfortunately has an hour or so I started to have problems with Internet... I go through the process of diagnosis to do repair, but that did not help much, so I updated my laptop. For a few minutes, it worked, and then the problem once more. Frustrated, I checked my other laptop (which I use to write this), and the network was very good. In fact, all my other WIFI device did not appear to have problems. Anyway, thinking it would help, I connected to my router, changed my mac address, it did not work so I had to go back to the default Mac setting. I ran troubleshooting 300 times or more, but who has not fixed my problem at all.

  I checked my network card, it is updated... I see no problems with it at all. I checked every setting in there, but there seems to be no problem. sometimes windows network diagnostics say found problems, he's talking about wireless /wifi ip is not configured or something, I don't remember the exact words. He would say that it is connected, but I see the yellow sign that appears on the wireless icon. He would also say «identifying...» "A minute im connected and then the next day it does not.
  I do of course when it comes to setting basic stuff, but it's just beyond my comprehension. I can't point the question of the pint. I just did a complete reset, in the hope that he would go back to its default setting if I have deleted or destroyed something by accident, but I still have questions. Can someone help me please. I am frustrated and fed up frankly at this stage.
  Please get back to me as soon as possible, because I have important files on this laptop that I need to download on my drive of google.
  Thank you.

  Hi Fergiey,

  When you run the network troubleshooting tool and which indicates that the wireless IP address is not configured correctly, I suggest that you reset the stack TCP/IP and check if that helps.

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.

  TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility.

  The reset command is available in the context of the NetShell utility IP. Follow these steps to use the reset command to reset TCP/IP manually:

  Steps: what please refer:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  a. open an command prompt, press the Windows key + X select prompt as an administrator.

  b. When the user account control box pops up, click on Yes.
  c. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:

  netsh int ip reset c:\resetlog.txt

  
  d. Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  c. restart the computer.

  d. When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as the removal and the reinstallation of the Protocol. The reset command rewrites the following two registry keys:

  SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
  SYSTEM\CurrentControlSet\Services\DHCP\Parameters.

  e. to run the manual command, you must specify a file name for the log, in which the action takes netsh is recorded. When you run the manual command, TCP/IP is reset and the actions that have been taken are recorded in the log file, called resetlog.txt

  Please post with the State of the question.

• Anyone had problem with access to their musical application after upgrade to 9.2.1?

  I upgraded my IPhone 6-9.2.1 - and again, I am sorry that I have improved - lol!

  I am not always able to access my music app now... after pressing the music icon, I get a picture of a lady standing with headphones - can not access my music.

  Someone else has the same problem and if so, were you able to solve?

  Thank you-

  I can access my music, but it crashes after a few moments and let me only access to some songs. Also sync with itunes is broken.

• I have a problem with access to the computer after forgetting the password.

  Original title: I forgot my password to connect you now I can not access anything that has to with the hard disk drive please help... Computer is going to crash

  My laptop monitor is broken, so I stopped using it... haven't used in awhile... now I'm using again and not the password journal-gin admins that I remember... I tried everything... it of not that big of a deal... the biggest problem is that whenever I try to do something that has to do with the hard drive including anything, including updates or access to anything or change all the settings download, he asks for the admin password... My computer will cause crash soon I can't save anything without the password. Help, please!? WHAT SHOULD I DO?

  [Moved from comments]

  Hello

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.