Problem with DVD/CD-RW on a P10 with XP home SP2

Similar Questions

• Problem with the home screen...

  OK this weekend that I had a problem with my home screen, whenever I'm in an application, by e-mail, or widget news or just about anything else, when I hit the button to exit and return to my screen home all it will show is my wallpaper. I dragged my screens to get everything back to normal. Anyone else having this problem?

  On this Cliq I had to pull the battery several times for various problems. I know that you might have already tried, but if he did no difference, as mine all the problems have been solved by that.

• I'm having a problem with Windows7 Home Premium and WWII CFS joystick operation. I get a message saying that the controller has been changed. Microsoft offers a patch?

  I have problems with Windows7 Home Premium and WWII CFS joystick operation.  I get a message from gibberish, saying that the controller has been changed.  I tried to replace the file with a version of Windows XP .cfg and also tried to re-write the .cfg file.  Apparently, this version of Windows will not allow a file to be saved with an extension ".cfg", so it does not work either.  Any suggestion would be appreciated.

  Thank you

  Hi Bob,

  You can consult the following links of wire and check if it helps.

  Joystick does not work with the Europe of WWII Combat Flight Simulator series. Help?

  With the help of WW2 Europe Combat Flight Simulator series with Windows 7 Home Premium

  Note: The above links contain third party links. Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Error: The service may be unavailable, or there may be a problem with your home when network equipment connect to games for windows live.

  Original title: the service may be unavailable, or there may be a problem with your home network equipment

  I just downloaded 'Age of empires online' and when I tried to connect to the game for windows live, he gave me this message:

  The service may be unavailable, or there may be a problem with your firewall or home networking equipment
  But I can connect to the game for windows marketplace app and on site. I also tried the solution given in other threads, but they did not work for me.
  my friend can connect to live in the game, but I don't even after that we use the same internet network. Also, I have authorized game through the firewall.
  I am using Windows 7 home basic 64-bit
  Can you help me please?

  Hello

  I suggest you to see the link:

  http://forums.Xbox.com/GFW/technical_support/connection_networking/f/265/t/8865.aspx

  If the problem persists, you can create a new post on the games for Windows forum here: http://forums.xbox.com/gfw/technical_support/connection_networking/f/265.aspx

  Hope the information is useful.

• Problems with Firefox home page

  I was trying to find a place to contact Mozilla Firefox feedback. I found this: https://input.mozilla.org/en-US/ but when I go to login / create an account of persona he says "you do not have an account here or you have used the wrong account of Persona to connect." Was looking for a contact Mozilla for defects/problems with Web site and I found nothing! I chose the best categories I could, but it didn't really fit all.

  Hello wolfgentleman, if you want to provide feedback to firefox, you can do so without registering to https://input.mozilla.org/feedback.

• Problems with Vista OS SP2 after automatic updates: using OneCare; application of integrated keylogger HP CPU "HP SDP" made by IBM in Durham, North Carolina (?); corrupted Samsung print driver downloaded from the website of the company

  Entered possible hacker:

  1. techie OneCare WINS access - probably not unauthorized and do not believe it causes always provided a quality service, but they have had access in the past.

  2 HP technicians - have had access to my computer once - did a good job with computer crash (not sure cause), but tried to sell me more HP products when I have no money...

  3. after the technicians HP did good job with crash, started to have pop-ups keep HP application that appeared as an add-on that works without permissions on my computer. Google the name of the HP SDP application > recovered information said program is IBM in North Carolina. Called them. Nobody gives any information on the program until I got ahold of a person who gave me the phone to techie Dept. It took all day. Not have not yet contacted technology because they have closed before I could call.

  4. called HP to inquire about the search info from HP SDP. on his goal? HP said he works as a keylogger you sell stuff. But what was weird is after the system crashed and repaired, there was one day that he has opened three times in ten minutes! The behavior of the application has changed after my OS has been repaired. Then after that I indicated HP where I found information on this program, the program disappear from the list of "run without permissions" in internet options explore > manage add-ons > run without the permissions list

  5. one day, I'm working on a word document, and the printer stops abruptly, impression. No amount of turn, or by clicking 'Cancel' will get doc from the printer queue. MS literature said this could be a security issue. The printer says "printing of documents", but no printing at my end.

  This problem is compounded when I delete browsing history and try to refresh the internet Explorer. That activity seems to take pieces of the program Samsung printer with it, even if I had excellent results in the past with Samsung printers and their downloads, and I never had the damaged printer driver to exercise this activity in the past.

  If I didn't have a short term in the Court of appeal in a week, I would say it's a question of OS, or program problem, but it's as if something falls down as soon as another issue is fixed and the unusual behavior of the computer, more timing and the purpose of the brief to me 90% sure that this is a pirate or a virus the surplus of the Samsung driver deleted pieces being left on my machine after uninstall.

  Dear Karena R,.

  Thanks a lot for your excellent advice. The Techies MS OneCare fixed the popup of HP before I read your message. (I was remiss to check my email...). I'll follow the instructions you sent me and am running the OneCare security right now, online scanner that I already know an excellent and effective tool because it has repaired my MS operating system and programs after that I accidentally deleted parts of the operating system by removing a .dll file, I need or such a thing! I also wanted to thank you for the information about the object of the HP SDP pop-up window. I saved your instructions on how to remove this case, the pop up appears again. One thing I noticed is that, after removal, some keys on my keyboard don't work, and I've read that other HP users encounter the same problem with the keys on the keyboard. The keys that seem to be affected are the keys that automatically open and close the door of the CD burner. Not a problem, because it is another way to open and close the drawer. It's one that HP must improve. In regards to your advice on the printer driver you have been 'right on' new! I reinstalled the driver using my own CD (not the latest driver, but one that works!) I think that the problem with the update of the Samsung driver that I downloaded from the Web site doesn't have some kind of problem. It is very unusual for a driver to Samsung, because I got excellent results with printers Samsung and free updates downloaded from their Web site. The first Samsung printer I had worked so well, for so long as the small rubber roller that takes the paper and it feeds through the printer wore out until the printer is, literally in a 100,000 pages printed after that I bought for about $80.00 dollars! So, I went out and bought another one, and that's what I use now. The printer works fine now, except for some reason, the icon in my taskbar notification area, allow to check the printer the status of jobs, cancel or repeat printing as before. Once. from time to time, a job stuck in the queue for the printer and will not erase unless I unplug the printer from the central unit. Nor will it print. But since I reinstalled the driver, this has happened only once. With the downloaded update, it happened all the time. It is possible that my OS is misconfigured, but I started to run the routine tune ups and analyses using OneCare and unless I used to defragment. I learned that the defragmentation of the hard disk too can cause problems also. The last thing is, I think that sometimes, tiny files needed to run my OS and files other programs can be sent to my temporary folder by accident. MS still once, All_Knowing computer, somehow recognizes the files I need and pushes me to ignore them, but perhaps it does not work for non-Microsoft like Adobe programs. I will use the link in your message to run the fix with the printer driver just to see if it works. If it is not the case, I can always reinstall the driver with my CD that came with the printer. Thanks for the excellent and informative tips and forgive me if I do not respond sooner!

  Sincerely,

  E-mail address is removed from the privacy *.

• Strange problem with Vista Home premium configuration update

  Just bought a Toshiba Satellite Pro L300-1AI which was preloaded with Vista Home Premium.

  Clicked on configure updates on the front screen and he entered a loop that says: Configuring updates: stage 3 of 3-0% complete. Do not turn off your computer.

  Every 5 minutes or so then stops and restarts with the same message. I left on for 8 hours, so can not believe he needs for this long. Just tried to set off, but when you restart it defaults as shown above.

  Please advise... even if you can get me right back to the normal screen before

  Hello

  Try please start your computer in safe mode and restore your operating system to an earlier time (before the update). Maybe this will help.

  In the future be careful with updates. I recommend you to disable the automatic update. Just check the list with updated supply and install important and recommended only. Disable all optional updates. You don't need them.

• Persistent problems with wireless home network

  Hi, the problem started two weeks or more ago, when after the connection to the internet easily using our wireless network connection, my computer began to say that our domestic network was unidentified, then studied by troubleshooting my self but do not really understand the information the computer indicated to me. As it was a problem of the internet I contacted our local provider broadband, they looked like the line and the service was absolutely perfect and to confirm this router computer of my father in the same cable network has internet connection easily as it was my mom who was using the connection via the same router wireless cell phone.
  Following the instructions of technitians I have tried to manually enter internet addresses to see if that would help the internet connection, it did. So I thought that the problem has been resolved. I had the use of the internet that day and everything was fine until I restarted the next morning. The problem reappeared. So I called my internet provider again, this time I'm sorry to say to a girl rather too quickly diagnosed that I had a virus to uninstall Google chrome and reinstall a different browser... That didn't make sense to me, but I tried some sort.  So I moved my office tower and all the bits in one place in the House were we could conect it to the router with an ethernet cable followed his instructions then moved the computer to its original position but still no internet connection and still this problem 'identification '. I turned off the machine and tried again the next day. Start by running the troubleshooting of network problems, this time I looked at the detailed report which curiously stated that the computer had difficulty oscillating between two somethings (sorry don't remember the detail correctly is days ago)
  So I called my internet provider again and I am a helpful young man, read him the information and examined the reports that they had written about the problem in the days preceding. I followed his instructions looked in the network sharing Center, settings changed and added in manual codes for the internet, turn off the router for 10 seconds or more and then restarted, this time with not even a temporary success. We tried a few things but I always got the same contradictory message in the dialog box in the lower right corner, where it showed I was connected to the local network not connected to the internet, when I opened the network sharing Center from the local network to the router would show that 'Identification' and the conection to the internet would be marked with a cross. I managed to pass my network profile is for some reason any defined to the public rather that home and we were able to change it (even if it wasn't easy)
  So I was told it was probably a driver issue, I was told I might need check the updates of my license on this operation the technitian and I also saw the site of netgear, that there was a potential conflict between Kaspersky and the netgear driver, so I need to uninstall my Kaspersky anti-virus stuff and the old pilot , down load and install the new drivers and then reinstall kaspersky. I followed it. (Movement of the tower and all the bits in place in the House were the ethernet cable was available).  I found an updated driver, uninstalled downloaded kaspersky and run only the driver installed Kaspersky again. Everything seemed to go well and I even plugged in the wireless adapter connected to the internet through that and disconnected the cable... things were going well.
  So I turned off the machine and carried over into my room where I turned on once again. The problem reoccured. I thought it was time to communicate with kaspersky. So I turned the computer off and reduced to the ethernet cable. Connected a Kaspersky contacted by e-mail, they were quick and I was asked to run a program that logeed my information system. I did this and I told them I thought it might be a conflict between the driver and their softwear, they have looked into it, asking me to run a misuse of this program and the results by e-mail. Once again, I've followed the instructions and took notes, but no problem was found. They showed me how to configure my kaspersky firewall to allow access to the networks. It's when I was doing that I noticed that the computer had five ads of our home network, so I put all the profiles of their trust, apply changes and tested to see if it would work. On the wireless internet in the office where the ethernet cable and a router are by train, it's good, it works. I connected the wireless network and disonnect the ethernet then on the internet and there is no break in service. But if I shut down the computer and set up in my room at 12 meters, it won't work with signal strong (4 / 5 bars are green).

  This morning I watched the windows firewall settings and changed some of them to see if that makes a difference. but none.

  I'm trying hard to think about this problem but I'm getting nowhere fast, I know just enough. I just tried pluging in the wireless network adapter again, but there is no wireless network connection now and no internet connection:

  After having tried downlaoding a new driver and this has not fixed the problem after having only tested the wireless signal is strong enough for good internet connection to my mother's computer in my room, I'm stuck. I looked on the netgear site and follow their advice, but it's really a night Mare!
  I also noticed that somehow, we put in place five versions of our home network, I wonder if there is some confusion computer... I looked into the idea of the removal of the networks, and it seems that you can not do. I am trying to back up my files, uninstall everything and re - build my computer from scratch. If there is something else I should try before taking this message please drastic measures me ASAP.

  Hello

  1. What is the operating system installed on your computer?

  Please follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Update problem with Vista Ultimate SP2

  I tried to install sp2 to Vista Ultimate twice, with the same results, he failed. The whole process took about 6 hours to complete. The second go round, I disabled my Norton 360 anti virus and turned to "silent". SP2 looked like, it had been installed with success, until I restarted the system. The pc then rebooted and was told that the upgrade was not successful and was recovering to its previous state.

  The upgrade works great on my laptop when I run "home premium". The upgrade of the laptop took less than an hour.

  No idea what is causing the problem, or do I just have to live with what I have?

  Hi Clocksnopper,

  Thank you for visiting the Microsoft Answers community forum.

  Clocksnopper, this problem may occur if any program on your computer interfered with the installation of the service pack, or if there is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  For more of this, you can try the steps present in the following article below:

  http://support.Microsoft.com/kb/947366

  Please let us know the results.

  Thank you.

• Error message "the service may be unavailable, or there may be a problem with your home network equipment.

  I spotted the internet for this problem, already that the others are State, carries advice on such things as disabling the firewall or the addition of exceptions (tried this), redirection of ports (tried) disable UPNP or put on (tried both) try someone elses account on my computer (tried and failed) etc. My second course, which also uses the same router wirelessly with a pc can connect to live gaming in resident evil 5 fine, but just used my machine. Me can I connect my game on behalf of windows via a browser or through the game for windows thin app, it's just in game it fails to to connect/download my profile every bleeding time, and I'm pulling my hair out as I am running out of ideas. I am convinced that the problem must be with my machine or rather how it connects to internet, as my friend computer directs the game with webcam live very much like. I am running Vista preium 64bits, obtained the material to support the game as, and I use a netgear with a router netgear dg8343 version 4 adapter.
  (PS tried to contact Windows support directly and that they want a product id for my windows, I get home, but it is rejected, my copy is genuine I can assure you that much, just bought it to overclockers.)
  Please help me. Best regards, Lytton.

  Hello Lytton, welcome.

  We will have a go at this:

  1. click on START
  2. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  3 type netsh int ip reset resetlog.txt , and then press enter
  4. then type netsh winsock reset , and press on enter
  5. close out on all open windows and go to START > Control Panel > Internet Options
  6. click on the tab "Connection" and then click on the "Network settings" tab
  7 uncheck "Automatically Detection settings" and click "Ok".
  8. click on 'Apply' and then restart your computer

  * Important: You MUST restart your computer after these 8 steps. The setting changes will not come into play until you do.

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• STARTING PROBLEMS WITH VISTA HOME PREMIUM

  9 times out of 10 that my computer will not start, it gets insofar as the bar goes from left to right, then it freezes and sometimes the Startup Repair will kick once if that works very well done, which is until I turn it off Green and I have to start the same process everywhere. I created a restore point that goes well before that time that I started to get into trouble, but it always crashes on startup. any help would be appreciated.

  Try this:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with Vista Home premium SP2 update

  I downloaded the suite Microsoft Office 2007 Service Pack 2 (SP2) via Internet (site of Microsoft Windows), it took me about 4 hours to finish, he said that the installation was successful, but when I checked "view update history", he says "status: failure!

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• problem with the home page

  I'm going crazy with this. When I type the URL for my home page of the site that it is getting the error message

  Warning : require_once(cw3/CWLibrary/CWIncGlobalSettings.php) [function.require - once]: failed to open stream: no such file or directory in /home/content/s/t/a/starlake1/HTML/mccarthysigns/application.php online 29
  
  Fatal error : require_once() [of thefunction.require]: Failed opening required ' cw3/CWLibrary/CWIncGlobalSettings.php' (include_path ='.: / usr/local/php5/lib/php ') in /home/content/s/t/a/starlake1/HTML/mccarthysigns/application.php on line 29

  I see he's talking cartweaver but I did not install cartweaver to this site. When I type in the url to the other pages of the site they can be read without problem.

  Help, please.

  Thank you

  You can have AN index page at the root of the server at a time.  You must remove the unwanted (php). When you do, your index.html page will go up.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• A60-302: problems with Win XP SP2 update

  I have Win XP Home OEM and installed SP2. Since then, the desktop icons are refreshed terribly slowly (for example at startup). Sometimes it takes 2-3 seconds for a simple icon appears in place of his general "icon". I'm just interested in other experiments in this.

  Another thing that has changed is that 'The House' disappeared from the Windows XP startup screen (the screen with the 3 small boxes from left to right), so now it says only "Windows XP." He disappeared with the others, too? Oh yes, and the little boxes changed to blue from green, which is, of course, not a very important issue, but always - is this normal?

  Finally, does anyone have an idea if there is a Toshiba official e-mail address where should be sent issues related to Windows? Just because the web page Microsoft says questions about OEM products should be addressed to the manufacturer of the equipment. I could not find such an address, even in SUPPORT, only this forum.

  Thank you
  András

  Hi andras,.

  I think that you have installed the Toshiba Recovery BONE, havn't you?
  and what laptop do you have? This info is important!

  For your first question with the icons I have no experience, but for the second.

  The colors changed boxes bit is a little confusing because XP Home are Greens and XP Prof blue ones!

  If you want the support of toshiba you must go to the country specific Toshiba Web page where you live or you bought the laptop. Here on the Web page you can find a banner with a support phone number on the left side in the middle of the site.
  Mail support is also country specific and is not available in all countries!

  I'll hope this helps!

  Tom

• Problems with the home network Vista-Windows 98 SE

  The material is properly plugged computer Vista 98-router-computer by ethernet.
  Group is correct on both computers (working group)
  Computer with Windows 98 Second edition can see Vista computer and network neighbourComputer with Windows 98Se can see Vista disk and shared folders and can create network drive
  It cannot access the file and read dirctory in folders shared of Vista. Wait and sometimes crash (happens with this machine before). In addition, it is very slow.
  Vista computer properly manage files, shared files on the Windows 98Se computer, it can load programs, but it is a stupid machine and she don't properly map the network (detail).
  If you can help, thanks. Answers in french are also welcome.
  Kind regards

  LaurenJF, we do not support setting up file sharing between Windows Vista and a version of Windows prior to XP.
  Thank you for visiting the Microsoft Vista answers community. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.