problem with a volume of disk in asm diskgroup.

Similar Questions

• Transfer data from local disk to Asm Diskgroup and vice versa

  Hi all

  I have two node rac installation and now I want to move the data from local disk to ASM DiskGroup.

  Is it possible, if yes, then please mention the way to him.

  Kind regards

  Ronak

  Hi all

  Thank you. Found that its possible using package 'DBMS_FILE_TRANSFER '.

  Kind regards

  Ronak

• Problem with the volume on Satellite Z30 control - A

  Hello

  I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.

  See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)

  Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.

  If I use external speakers that connect via USB (Logitech Z305) it works perfectly.

  I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.

  I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.

  Any idea?

  Thank you very much

  PHILIPPE

  Hello

  According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
  That's why the Realtek HD audio Manager software should be available in the control panel.

  Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.

  In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
  This software provides audio improvements in your computer.

  To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.

• Problem with the volume of a new 7 Slate

  I'll put up a new slate of 7 and I have a problem with the sound.  I have all the sliders to the max value, but any video or app plays at a very low volume on the builtin speakers. A trial has been with FIOS app that allows me to stream TV shows. I have to hold the Tablet so the speakers are right next to my ear to make the same concersations on the show and it's barely...

  Am I missing something?

  How to make your slate with audio files simply by using the application to play music?  And have you tried to play a trailer of the game of Google?  Type right on a movie title and play the trailer by typing on the > arrow.

  What if you use headphones?

  Do you have ear system sounds?  Go to settings > sounds > Touch seems to be there where there is a checkbox on the right whether Touch sounds are on or off.

  Speakers of slate are not all that, but they do not produce a sound that is strong enough to listen to the TV shows and movies.  If you can not enough volume of them with other applications such as the music plays, there may be a hardware problem.

  A few other suggestions... try to restart it.  And back to headphones, try inserting a headphone plug in all the way and disconnected.

  _
  As a contributor of top of page on the Forums of media consumer, HP, HP gives me access to the slate of 7 free of charge so I can better answer questions on the Forum.

• Problems with fluctuating volume of Windows Media Player

  After that I transferred MP3/WAV files to my old laptop which has Vista... for my new laptop which has Windows 7, my windows media player then started acting crazy during playback of music files.  The volume goes up and down, and during parties strong songs, it goes almost silent... with a few songs, it becomes just as hard very quickly and then just cut all together.  I tried tools audio fix from microsoft, and they were unable to help him.  Basically, it sounds like when you listen to music, and you would simply continue to cupping your ears again and again, as you can imagine is really annoying while you try to listen to music

  Try the following steps, presented by another poster, JoeyNice:

  6 steps that have helped me with this problem:

  (After looking at a few ideas from there I went and did my own investigation and arrested next steps the boring windows media player playback sound fluctuations)

  (1.) start the media player and go into menu improvements in media player andreset all default media player improvements and disable all improvements and equalizer, etc...

  (2.) do right click the speaker volume icon (located in the lower right corner of windows in the area of programs/notification bar) then andclick 'sounds' in the right click menu (or if "speaker" icon is not in the notification bar go to control panel and click on 'sounds')

  (3.) in the sounds of communications click menu tab and select 'status quo '.
  
  4.) , while on the sounds tab menu click play, and then click speakers allowing you to then click on properties
  
  5.) in the sounds-> speakers menu properties go to improvements and select 'Disable all sound effects'

  6.) while in the sounds-> speakers menu properties go to the Advanced tab and "restore default settings" , then click on apply and then OK and then apply and ok again and the sound menu

  These steps allowed me to be able to go to windows media player and listen to music with no fluctations (and you can now be able to turn on the equalizer again if you want to make adjustments, but if this causes the fluctuation back just turn Equalizer back off.) I could turn it back on after you follow the steps above with no fluctuation)

  Let us know if this suggestion helps with your problem of fluctuating volume.

  Sincerely,

  Marilyn

• Add disks to asm diskgroup

  Hello
  Add space in the diskgroup DISK_ASM_D2
  RAW devicw name is ASMDISK10G12a
  
  This is disc Info
  code
  
  NAME STATE
  ------------------------------ -----------
  CONNECTED DISK_ASM_D1
  CONNECTED DISK_ASM_D2
  CONNECTED DISK_ASM_I1
  DISK_ASM_I2 MOUNTED
  CONNECTED DISK_ASM_S1
  DISK_ASM_S2 MOUNTED
  code
  
  code
  DISK_GROUP_NAME DISK_FILE_PATH DISK_FILE_NAME DISK_FILE_FAIL_GROUP
  --------------- ------------------------------ ------------------------------ ------------------------------
  DISK_ASM_D1/dev/rdsk/ASMDISK10G0a DISK_ASM_D1_0005
  DISK_ASM_D2/dev/rdsk/ASMDISK10G7a DISK_ASM_D2_0000
  DISK_ASM_D2/dev/rdsk/ASMDISK10G1a DISK_ASM_D2_0001
  DISK_ASM_I1/dev/rdsk/ASMDISK10G9a DISK_ASM_I1_0003
  DISK_ASM_S1/dev/rdsk/ASMDISK10G8a DISK_ASM_S1_0003
  
  code
  
  LUN ORACLE_ASM_RAW_DEVICE4
  raw device ASMDISK10G12a
  
  Please give the steps to add the raw device (new drive) to the exsisting disk group

  Yes, there could be performance problems with an uneven distribution of the data.
  Must rebalance, my suggestion is to postpone the rebalancing if critical his system out of peak hours.

  Published by: vlethakula on February 22, 2013 09:51

• Adding disks to ASM diskgroup online?

  Hello
  
  We can add disks to the existing diskgroup ASM of the production in line (no stop)?
  
  AIX 5.3
  ORACLE 10.2.0.4
  2 node RAC
  
  Its a matter of production...
  
  -Thanks in advance.
  Santini.

  Another thing to keep in mind is to try to keep the same drive sizes.
  If your previous discs were 50 GB in size are your new 50 GB disks.
  This is only to help the rebalancing of the data on the disks of the diskgroup.

  Kind regards.

  Please mark this question as answered if you don't need any additional information.

  Published by: user11150436 on November 11, 2010 15:00

• Satellite P200 - problem with the use of disk HARD original as external drive

  I've been pulling on my hair for a month now and could do with help

  I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

  The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
  The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

  When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
  Hance a good work of 200 GB of HARD drive.
  Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

  I formatted, low level run endless disk tools
  WD test came back with diagnostics Test::Read 11 - cable sector error!

  Even as a drive on the original laptop is the same

  All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

  Thank you very much
  Roger

  Hello!

  The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
  You can test the HARD drive in another external case?

  WD test unknown to me but I always use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Pavilion dv6-2124el: problem with the volume key

  Hello
  
  I wanted to know if someone could help me with this question: I have just formatted my laptop and installed Win7 HP 64 bit computer and I can not anymore in order to visualize the volume HP bar on the screen. I tried to install HP Quick Play, quick launch buttons and touch fast, but it does not work. Maybe I installed wrong version? Maybe I missed another driver/software?
  
  How can I solve this problem?
  
  Thanks for reading it.

  Hello

  For your particular laptop volume on the display screen is provided by HP MediaSmart SmartMenu on the following link.  Note:  Make sure that you have installed at least 1 other MediaSmart software before installing this.

  HP MediaSmart SmartMenu

  After the installation is complete, restart the laptop.

  Kind regards

  DP - K

• BlackBerry Z10 problems with video VOlUmE

  My videos don't seen to have the volume on my blackberry. I habe a bunch and none of them have.  also, I sent a couple and they had no picture. they were sent on wifi. does anyone else have this problem?

  I don't know what the problem was but I pulled the battery and rebooted the phone and it works fine now. Thanks for help. The video was the one who was shot with the phone, so he would have to play very well. He does now.

• Problem with double volume ID

  I have this little block of code that passes through each disk and assigns to thin provisioned when setting up the job specification.

  if (_vmThinProvision)
  {
      ConverterStorageParamsManagedTargetDiskParams targetDiskParams = new ConverterStorageParamsManagedTargetDiskParams();
      converterStorageParams.targetDiskParams = new ConverterStorageParamsTargetDiskParams[_computerInfo.hardwareInfo.storage.disk.Length];
      for (int diskCount = 0; diskCount < _computerInfo.hardwareInfo.storage.disk.Length; diskCount++)
      {
          targetDiskParams.sourceDiskId = _computerInfo.hardwareInfo.storage.disk[diskCount].diskId;
          Console.WriteLine(targetDiskParams.sourceDiskId);
          targetDiskParams.diskType = "vmfsMonolithicFlatThinProvisioned";
          targetDiskParams.datastoreName = _vmDatastoreName;
          converterStorageParams.targetDiskParams[diskCount] = targetDiskParams;
       }
  }
  

  Lets take an example where a system has 3 disks. In the code above, if I just set up each drive manually instead of having in a loop (same exact code, just to get out of the loop and hardcode the array index), it works fine. Each disk and volume gets its own ID and conversion works correctly.

  For some reason when I implement the loop, it seems to take the same disc 3 times instead of 3 different discs and, as would be expected, confuses the heck out of the VSS service. See the changelog below from the source system.

  2012-02-22T10:03:54.782-05:00 [05180 info 'task-29'] CloneTask::SetupTask
  2012-02-22T10:03:54.782-05:00 [05180 info 'task-29'] CloneTask::InitializeSourceComputer
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CreateSubTasks: Creating SingleVolumeCloneTask subtask with used space of 122512128512 bytes and a contribution percentage of 33
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CreateSubTasks: Creating SingleVolumeCloneTask subtask with used space of 122512128512 bytes and a contribution percentage of 33
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CreateSubTasks: Creating SingleVolumeCloneTask subtask with used space of 122512128512 bytes and a contribution percentage of 33
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] SingleVolumeCloneTask: estimated time to clone volume [\WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]] in seconds = 6074
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] SingleVolumeCloneTask: estimated time to clone volume [\WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]] in seconds = 6074
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] SingleVolumeCloneTask: estimated time to clone volume [\WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]] in seconds = 6074
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] CloneTask::InitializeTargetComputer
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] CloneTask updates, state: 1, percentage: 0, xfer rate (Bps): <unknown>
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::StartNextTrackingBitmap: no bitmap ID specified for the next cloning iteration, will not track changes
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::IsSnapshottingRequested: source volume snapshotting was  requested
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CollectVolumeIdsToSnapshot: we will try to snapshot volume \WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CollectVolumeIdsToSnapshot: we will try to snapshot volume \WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]
  2012-02-22T10:03:55.251-05:00 [05180 info 'task-29'] VolumeBasedCloneTask::CollectVolumeIdsToSnapshot: we will try to snapshot volume \WindowsBitmapDriverVolumeId=[69-A9-7F-F0-00-7E-00-00-00-00-00-00]
  2012-02-22T10:03:56.173-05:00 [05180 error 'task-29'] Converter::AtomicVssVolumeSnapshotSet::CreateSnapshotSet: VSS snapshot failed: Unable to create a snapshot for volume \\.\Volume{db72d0dc-4b08-11de-abf5-002219c7d318}, \\.\Volume{db72d0dc-4b08-11de-abf5-002219c7d318}, \\.\Volume{db72d0dc-4b08-11de-abf5-002219c7d318}. Error code 2147754765 (0x8004230D)
  

  You noticed I put a little console.writeline here to show me the code. They are different at this time. Sometimes between it and the submission of work deal with the GET IDs all rigged to the top.

  Yet once, if I just take the loop and the hard-coding the index, it works fine. Any ideas? It has really puzzled me.

  Thank you

  You need to move

  ConverterStorageParamsManagedTargetDiskParams targetDiskParams = new ConverterStorageParamsManagedTargetDiskParams();
  

  inside the loop. You need a new instance for each disc. With the current implementation, you don't have that one instance and several references to it, in order to update the instance updates "everywhere" it is referenced.

• Problems with HP supplied recovery disks

  HP Pavilion dv6325us

  The hard drive died on this computer so I installed a new and tried running the recovery provided with this computer disks when I bought it.  After you initialize the disk, I inserted the first disc and got the following error message:

  "This CD contains a backup of the software installed on a PC HP Pavilion and cannot be used with a PC HP Pavilion.  If you receive this message on a HP Pavilion, please call HP support. »

  I called support and they wanted me to pay for helping me through what I refused.  When I find the help topic on the support pages, he said this:

  See if you can find a Dell Vista Home premium neighbor installation disc, a friend or co-worker, you can use this to install Vista, after installation you need to change the key, as the Dell installation DVD will automatically put in a tone of Dell, but it will not allow activation, change the key by right click on "Computer" in the start menu put in the key of your sticker.

  If for any reason, it will not activate with your key sticker (make sure that you type it correctly), call Microsoft on the phone and they will guide you through have activated.

  Activation of Vista hotline 1-866-740-1256

  http://pcsupport.about.com/od/productkeysactivation/HT/changevistakey.htm

  .

• HP Pavilion dv6-2160 problem with upgrade of the disk

  I am trying to upgrade the drive in my dv6.  The current disc works well, but I managed to fill up the 300 GB or so on it.  I got a new 750 GB 7200 RPM Hitachi drive.

  So, I want to clone the existing to the new and larger drive.  Here is what I tried:

  • Bought a copy of Acronis True Image & burned a boot DVD
  • attached an external 1 TB drive USB for a backup on the laptop drive
  • put the new 750 GB drive in an external USB enclosure
  • tie the 750 GB drive to the laptop
  • Put the boot Acronis DVD in the DVD drive on the laptop
  • Rebooted the laptop and started on the DVD of Acronis
  • made a backup of the laptop drive on the 1 TB drive
  • perform a restore of the backup on the 1 TB drive for the new 750 GB drive
  • removed the original from the laptop drive and replaced it with the 750 GB drive
  • powered on the computer... and nothing happens

  At this point, I can't boot using the boot DVD or even press F10 to go into the BIOS.  When I put the disc original back in, it starts very well and I can restart and use F10 to access the BIOS.

  So, the question is this: why does not the new 750 GB drive?  AND... Why it won't let me boot from a USB device or DVD with the 750 GB drive in the laptop?

  Well, my suspicions were correct. I deleted all partitions on the new disk and put it in the laptop as main drive and allowed me to boot from the DVD drive.  So, I booted the Acronis software and am now cloning the old disc (USB connected) on the new drive and it is automatically re-sizing of partitions.

  Thanks for your help pepe99 & erico you two in this.

• problem with esxcfg-volume on vMA 4.1

  Hello

  I am a beginner with vMA. I use vMA with ESXi 4.1 4.1.

  Vifp addservers and vifptarget - set to an ESXi, but l - or control - list esxcfg-volume return nothing!

  What have I forgotten?

  When you run vifptarget - together makes your command prompt show the appropriate host?  You should see something like this:

  \[VS-ESX01.lab.vsential.NET]$

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• Problem with getting images of disk removable (E).

  He has worked several times before, but since last week, he used.

  SanDisk card placed in front of the computer does not work.

  SanDisk card in USB device and then connected to the back of the computer, does not work.

  Device is detected in Device Manager, but not opening.

  Data sheet: emachines, Windows 7 64-bit, multi-in-1 card reader, el1360-ub3p HDMI personal computer at home

  He has worked several times before, but since last week, he used.

  SanDisk card placed in front of the computer does not work.

  SanDisk card in USB device and then connected to the back of the computer, does not work.

  Device is detected in Device Manager, but not opening.

  Data sheet: emachines, Windows 7 64-bit, multi-in-1 card reader, el1360-ub3p HDMI personal computer at home

  ==================================
  If the card is recognized as removable (e :)) drive

  You can right-click on drive removable (e) and choose open
  or explore? If_Yes_does display the directory of the
  memory card?

  Maybe you can copy your files from there?

  If AutoPlay doesn't open when you insert the card...
  the following items may be worth a visit:

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings