Problem with external microphone

Similar Questions

• Are there any known problems with external battery for iPhone 6 s karim?

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested in what Apple says rather than what says karim.

  Thank you.

  Jkim99 wrote:

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested what said Apple rather than what it says karim.

  Thank you.

  There is no Apple here in this technical forum from user to user.

• Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)

  Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!

  I was able to solve the problem with the microphone on the G60-549DX when using Skype.  I spend up to 6-8 hours, talk with convenience stores of HP.  They were very friendly and helpful.  The same help a friend.  My friend downloaded updated bios and micro drivers.  HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone.  Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy.  It's a good computer I can say.  The technicians were all very friendly and helpful.  They called me several times to check to see if it still works OK! They are HUGE!  They want to help with any other question, I have perhaps with the computer.  Thank you very much for the help. Everyone was SO helpful.

• Problem with the microphone on the vostro 1500

  Hello. I have a problem with my microphone..., it does not recognize my mic when I put it in the entrance... I don't know what to do... Help, please.

  Thank you

  VGA.

  
  

• Problem with external hard drive (an unexpected error - 50)

  I've had this problem for a few months now. Sometimes, I can't delete a file from my external hard drive, or export a file to it. The process is impossible, and I get a message "Cannot perform the action due to an unexpected error - 50". Ejecting the disc gives the message "eject impossible because another program can use it." Ejection force becomes the only option. After re-login, the problem goes away, like nothing ever happened.

  The question is not constant, but quite common to become a nuisance, the one I want stopped.

  That's what I think it is (a bad connection with the cable, defective contact), or is this a virus? I need to know.

  The hard drive is 1 TB Toshiba Canvio Basics and is formatted as Mac OS extended (Journalized).

  not a virus, and not only because there is no virus mac at this time.

  negative errors on the discs can be a signal indicating that the file is corrupted or worse still, the drive is failing. While it can also be a problem with the cable or the connector that it commonly goes back on the disc itself.

  Currently, it is recommended that you backup your data if a backup fails, you may need to save what you can manually and sometimes that means go to this folder by folder or file by file

  Use Time Machine to back up or restore your Mac - Apple Support

  All HARD drives (and SSD') eventually fail and while this isn't a your statement you should check the drive with disk utility (Macintosh HD/Applications/Utilities/Disk Utility) after you got what you possibly can off and consider replacing the disk with a new one.

• Ver El Capitan 10.11.6 - problems with external display

  I've updated my Macbook Air to the latest version of El Capitan (ver.10.11.6), and since then, I had problems with my external monitor: image is thus largest, out of proportion, and I can't seem to be able to set the zoom out or by using the display options. That's all just terrible to work with her. It is not my monitor because I never change its configurations, and there is nobody else who has access, and the problem started after I updated to version 10.11.6

  Any help will be appreciated!

  How do you connect the monitor?

  Mirroring your screen or to help us address display?

  What is the native resolution of your screen?

• Problem with external HARD disk - cannot mount the mac partition and can't unmount the partition windows

  Hi all

  Need your help. I have problems with my external hard drive. I worked on it yesterday when the cable is a little detached and disassembled my intestinal HARD drive.

  Here are the specs:

  1 Macbook Air 11.5 "running on El Capitan (10.11.1)

  2 Buffalo Ministation external (1 TB) HARD disk divided into two: a Mac partition (for time machine) and the other a windows on FAT32 partition.

  Before the accident yesterday, it was working OK.

  Now, when I connect the HARD drive, it turns on but the Mac partition cannot be mounted (it does not appear on the Finder. I opened disk utility... just load forever and does not work) and the Windows partition is visible... but I can't take it apart without turning my computer.

  I can assemble and disassemble a USB stick very well.

  Any help would be appreciated.

  Thank you!

  Maybe you can explain a little better.

  I would like to make some general comments before having your replay.

  It is not wise to use TM on a disk with apple unformatted or partitions, it is preferable to have a dedicated TM drive also.

  For TM, the rule is that the drive is about 3 times the size of the boot disk.

  Normally you 'survive' a good step disassemble the drive external, but in this case with a another partition formatted on this subject, I'm not sure if that do not corrupt the disk, especially since the Windows partition is bootable. I have suspct the partition GUID on the TM partition table is corrupt.

  I propose to start the disk completely: in DiskUtility select the 'higher' level (name of manufacturer) and the Partition, one OS X Extended (journaled) partition table Partition GUID. And use it only for TM, is not too big for this.

  Have another drive formatted NTFS for Windows.

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• problems with my microphone.

  A week ago, I downloaded some songs from youtube video. Since I did that I have a problem with Skype. my friend can't hear me. I hope you can help me. I built in mic. then I do the complete control panel and checked Audio & Sound devices. and finally, it works. then, yesterday and today it did not work. I'm really in ideas. What is the format of youtube videos? I continue to test material of the voice, and the part of the recording does not move as it should. I hope you can help. Thank you.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello Ralkholi,

  Thank you for your message.  Have you tried talking with someone else on Skype to verify that the problem is not with your settings of Skype or Skype or the sound of your friend settings?

  After you have verified that the problem is on your side.  We need to address a few issues that might cause this problem.  First of all, we need to check your computer for malicious software that might have been downloaded with YouTube videos.  Click HERE to download and run the Microsoft malicious software removal tool.  Secondly, we must verify that your microphone drivers are up-to-date.  Access your microphone manufacturer and download/install the latest driver.

  Please let us know if it did or did not help to solve your problem.

  Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• X230T USB 3 port sleep problem with external Blu - Ray drive

  Hi all

  I bought a new LG external blu - ray drive and I have problems with it sleeps very quickly.  It is recognized in Windows 7 and will be available for a short period of time after I turn it on, but if I don't use it for 30 seconds, it's in a kind of fashion 'sleep'.  It works perfectly on the single WE port 2.0 on the X230T so there must be something with the 3.0 port.  The drive is powered by an AC adapter and USB 3.0 cable included one.

  I tried to disable all the properties sleeping USB in all areas of power management and power options in Windows.  Also enabled and disabled USB hub root energy saving.  Also, I went through the BIOS and threw the USB options as well and can't find why it is go to sleep so quickly.  I have the latest firmware on the drive, as well as the latest drivers Lenovo USB 3.0 for the X230T.

  I guess I'm out of luck at this point because I think I've tried all possible solutions?

  Thank you.

  Hi again,

  I have looked on the specs and do not see why this problem should occur. I would make sure that the BIOS is updated, if you have not already. The latest BIOS for your machine is 2.03 and came out a month ago. This update, you can find here. And if this does not work, can you check and publish what are the settings in your BIOS Config > USB Configuration?

  Best,

  Adam

• Problems with external javascript file

  For some reason, I can't get a text external/javascript [.js] file works correctly on my Web page. I went to Adobe Help Viewer and follow the instructions clearly. But it all comes to a cause I can't seem to see a little icon in fashion design javascript to connect my widget external javascript to support javascript on my page. Why is this? I have the visual aid invisible items checked as well. Here is an article of the code below.

  Rufus65 wrote:
  > I'm sorry, I went from one problem to another, the first problem with the
  > javascript shield was my main problem and the first and its fixed. now, it's a new
  > problem, but I think I can just cut this time around, I got the codes mutilated
  > of this site: http://www.widgetbox.com/#. it allows you to customize your own
  > widgets and I thought that it was legitimate, apparently is not. to solve my javascript
  > problem, basically I want to just a website that has downloadable widgets for me
  > to insert into my website using dreamweaver CS3. That is my main task, I was
  > trying to accomplish. I started 5 steps before this goal which was not brilliant
  > at all. So my main problem [outside my other topic post on my screwed upward
  [> header] is just to get legitimate widgets that are free and easy to use in
  > dreamweaver CS3, cause I don't have time to learn Javascript code or whatever it is
  > close to him.

  Depends on which widgets you want and what you need to make them specifically for you. Maybe start a new thread, listing widgets that you feel you need and what you want to do with them.

  You do not have available in the Insert bar Spry widgets, but they can or may not be able to accomplish some of the things you like to do, be specific about what you want to do on your end, and what you want the end result to be. Send examples if you have.

  Many widgets will require some, if not encoding extended, to get the best out of them. For example, widgets to http://ui.jquery.com/ can do something relatively well, but in Dreamweaver CS3, you need to enter the code to be able to set a lot of options.

  Where it's important, DWCS4 added a "web widgets" option that allows you to install widgets from the Exchange:
  http://www.Adobe.com/cfusion/exchange/index.cfm?s=5&from=1&o=desc&cat=290&l=-1&event=Produ ctHome & exc = 3

  But even once, they may need a little digging intot he code to get the best of them.

  HTH

  --
  Danilo Micen
  | http://blog.Extensioneering.com/
  | Extensioneer WebAssist
  | Adobe Community Expert

• Problem with the microphone on Equium A210-1AS

  I recently bought the A210-1as

  I tried to get my microphone, nothing helps. I tried all possible settings - a bit of a techie myself but still no joy

  aid?

  Thank you

  Paul

  Hi mate,

  How do you say 'I tried to get a sound from my microphone? Do you mean, you want to activate the internal microphone (are you all sure that there is one?) ?? Or you attached an external microphone and it work won´t?

  Please give me this information so maybe I can help you...

  Welcome them

• A problem with the microphone on my computer.

  I had a problem on my microphone (default) on my computer.

  If I don't the Array Microphone and Microphone Boost to zero, the microphone will be howling (a little of its huge appear on my computer). It's my setting on live right now:

  

  

  It's the audio device:

  

  I use this computer:

  Product name: HP Pavilion dv7 Notebook PC(dv7-6c95dx).

  Windows7 system

  Some of my friends told me to turn off "listen to this device ', but I need this choice. So please help me to solve this problem.

  Thank you

  PS: My English is not good, please excuse. If you need information about my computer or system, I can give them. I'm sorry the improvements of microphone is Chinese.

  Hello SuperPianist,

  Please take a look at this documentand let me know if the troubleshooting steps help you solve your microphone.

  Good luck!

• Skype on TPT: problem with the microphone?

  I'm doing Skype works with tpt, but it seems to give the question in entry. Record is read with a high level of noise of throbbing, as if a machine is lit inside Skype. I tried this with the test of voice call and Skype through my 220 x. I also uninstalled and reinstalled Skype twice. Skype is not on lenovo appshop so I wonder if it is not compatible with tpt now? Anyone else having this problem with Skype? Any input Lenovo ataff why Skype isn't on appshop also would be appreciated. CM

  the last Skype is now available and the mic and volume will improve dramatically!