Problem with Multisim: Async signal not support on 74ALS74AN?

Similar Questions

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• Satellite A100 - signal not supported from PC to TV

  Hello

  I have a Satellite A100-SK8 I used to connect it to my Sony 40v2500 using a cable of AVG. However, recently it will no longer connect and I get the mesaage "signal not supported set the output to your pc" on the TV. I use the same cable to connect my another PC to the same TV and it works correctly.

  Any help is very appreciated!

  Thank you
  Shain_20

  Hi shain_20,

  Can you explain which is an AVG cable? I've never heard of this

  In any case, he s strange that he doesn t work then you change some parameters of display or any other driver/software driver?

  Maybe reinstall the display driver could help...
  Usually, you can switch between monitors using the FN + F5 key combination.

• Call of duty modern warefare 2 problems with windows 7, is not playing as well as he has done for my last computer, it is not lag as many it is, not as the real game

  Call of duty modern warefare 2 problems with windows 7, is not playing as well as he has done for my last computer, it is not lag as many it is, not as the real game

  have you checked on the memory of our pc? Call of duty modern warfare needs at least 2 GB of memory, another thing you need to consider is your video card in your pc windows 7. try to update the first video card drivers. verification of your memory.

• HP Support Assistant unable to fix a problem with the CD/DVD not detected

  I have a G42-415DX laptop and I can not read cd/DVD, it was working fine 3 weeks ago and now nothing / I tried the support assistant and he could not solve the problem.  I got a message saying the driver must be reinstalled, how do I reinstall the driver?

  Hello

  If you do not get the chance to use another PC, I would definitely create the CD and the DVD bootable as it would give a clear indication if there is a hardware problem with the optical drive.

  In the meantime, try following the procedure in the title of the subheading "Let me fix it myself" on the link below to remove upper and lower filters (if these registry keys exist) and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  If find you the following registry keys and delete them, restart the laptop before checking the disc.

  Kind regards
   
  DP - K

• HP 3520 Pro: problem with Russia, Nizhny Novgorod, RSS support center

  Hello, I have a problem with the certified service center, in named RSS (Nizhny Novgorod / Russia).
  I don'n know where I have to call or write with my problem.
  Help my please.
  
  My problem:
  I bought my computer HP Pro 3520 year 2013. I was really happy, how it works. But once I take this problem that has no solution (Decision) - he started working very slowly. The Task Manager show me 100% boot hard drive. Wen, I restored it Windows repeated problem. Then I format my HARD drive and installing clear Windows 8 + new driver - problem repeat (computer work very solw).
  My computer cannot start at the end.
  
  I drop to the certified service center and talk about my problem. After analysis, they say about me - video-chip problem and set a price of repairs. I agree and they repair my computer and say that this problem is solved.  And they have damaged the housing of my computer.
  But when I get home I see - Task Manager show me a boot hard disk 100%.
  
  I try different drive HARD and Windows 7, 8, 8.1 - stay problem.
  
  When I Comeback the Certified service center they tell me I should buy HARD drive because it has burned, after that, during a conversation, told me, what happens in not burned but have bad blocks. During a conversation, they try to sell me HDD and various services with addition of money wihtout problem solution.
  
  What can I do in this situation?
  Your organization handed them a certificate, but they work very badly and your image in the spoils of the Russia.
  
  Pleas, halp me in this problem.
  
  If your need I can given my contacts.

  @ManikAndre,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  Thank you for visiting the Forum from HP Support.

• Problem of 'battery installed is not supported and will not be responsible' ThinkPad X 230

  Hello

  I bought a real x battery 220 / 230 x. After I turn on the laptop, I got a message: the portable computer does not support this battery. I tried to update the bios but nothing happened. The power manager says the battery voltage, cycles, performance, battery LGC. If I unplugged the laptop, it is working so the laptop can use the battery but no charges. If it was not a genuine battery I do not see these description or should I also?

  Maybe it's not compatible with my 230 x because it compatible x 220 and the seller didn't know?

  I have attached a few photos on the problem. If someone knows anything about this please help me. Thank you.

  Link to image 1

  Link to image 2

  Comment to Moderator: Images > 50 KB (or total of > 50 KB) converted into programming. Community rules.

  Good day and welcome to the community.

  The 230 X works with the 44-series batteries, incorporating some new circuits which interacts with the x 230. As you have seen, the 230 X will run from a battery of 29-series, but it will not reload. The native X 220 with batteries series 29 series, but also works with the new series-44.

  Kind regards.

• [FPGA] Problem with the sinusoidal signal generator

  Hello!

  At first I want to apologize for my English is not my mother tongue.

  Hardware and software I use is:

  LabVIEW 8.5

  NEITHER RIO 2.4.1

  NEITHER cRIO-9014 (controller in time real CompactRIO)

  NEITHER cRIO-9104 (chassis and FPGA)

  NEITHER 9264 (16 channels, +-10V, 16-bit voltage analogue output Module)

  I made a very simple FPGA VI: a while loop, generator of sinusoidal signal and a FPGA of e/s node in the loop. I've specified the Gnerator settings by following the path:

  Frequency = 50 Hz
  Amplitude = 1
  Phase shift = 0.00
  Size of the table look-up = 1024
  = 16-bit amplitude resolution

  FPGA clock frequency (40 MHz)

  But the wave of "sine" I got is not what I wanted to get. First of all, its amplitude is 1 V. shouldn't it be coded on 16 bits? If I wanted to get 1V I should have specified Amplitude as a 3277. In addition, 'sine' is not very detailed, it's look like "steps", as many samples vere missing. What I did wrong? I checked the samples and tutorials, I did everything the same way. A I forgot something or not has not specify other parameters?

  Thanks a lot for your help!

  OK, I solved a problem. It's embarrassing to admit, but maybe this will help someone else I blame my inexperience

  The main solution to the problem was changing calibration of calibrated RAW Mode. After that, everythoing works as expected. I had a problem with a sample because I was using a multiplier to control the generated sine wave amplitude. But... She was set to 1 in the sinusoidal signal generator. That was the reason for waveform Gradin. Please, don't laugh too much

  In any case, thank you for an answer! It is now resolved

• 2542: problem with cartridge - mail does not

  I have a problem with printing (scratches on print). Contacted HP via support form and received a mail that I get a new cartridge. So far so good.

  In the HP E-mail additional requests for information (address details), replying to the email does not work, and there is also no way to share the info with HP. How to proceed?

  Hello

  I've included a list of country phone numbers support in the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• I have problems with my DNS does not. It happens every day.

  I'm having problems recently with the DNS does not.  However, it is not a constant problem.  I have access to internet, and then a few hours later will have no access.  It went back and just 3 times in more than a few days., I do not have anything to temporarily solve the problem, it only happens on its own. This occurs regardless wireless or direct.  Thank you...

  original title: DNS is not responding

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Perform the steps mentioned below and see if the problem persists.
  a: click on the button "Start".
  b. in the search box, type "invite."
  c. in the list of results, right-click Guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d. at the command prompt, type ipconfig/flushdns.
   
  Method 2: Click on the link below and see if the problem occurs.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/i-keep-getting-this-message-your-computer-appears/7b1f225b-5936-495e-be3d-9ec1d074d3b5
   
  Method 3: Click on the link below and see if the problem resolves.
  http://support.Microsoft.com/kb/928152
   
  
  Hope this information helps.

• Problems with itunes and can not locate network %APPDATA%/

  I'm having a problem with trying to download itunes 10 because he repeats to me he couldn't locate network %APPDATA%/ when he tries to install quicktime with itunes 10 Installer. I can install quicktime very well, but even this will not fix the itunes 10 installation problems.

  I had installed on my computer since then two games and work very well. The other could not install correctly, but the appdata question had nothing to do with it.

  I use windows vista Basic.

  Hello

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• I have a problem with my printer does not print not the computer it's a software problem, a problem in device driver or a service pack problem

  I'm having a problem with my printer. he do not print on the computer. He told me that it is connected. Is this a problem with windos vista or is it a problem that I need to upgrade to service pack 2 and how do I know which service pack I have.

  Hello

  ·        What is the model and brand of the printer?

  ·        What happens when you try to print?

  ·        The printer worked fine before?

  You can run the fix in the here is given a link and try the solutions too.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Have a bunch of problems with windows 8. Not sure if they are related.

  I had several problems with my computer of windows 8

  (1) some applications can't seem to save my preferences
  (2) I could not install microsoft silverlight.    Error message: the installation log file could not be written. Verify that the Temp folder exists and that you can write to it.

  (3) the weather application will never start it gets stuck on the loading screen
  (4) the application of the internet Explorer seems to have disappeared, and I don't know how to get it back.

  Hi Grace,

  For any question related to the preferences and Silverlight, I suggest you log on as an administrator and try these steps.

  You can also read the following article and install Silverlight.

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. Follow these steps to resume and restore the registry.

  a. go to start and type regedit.

  b. Select regedit and then right click on the screen.

  c. click on run as administrator.

  d. find and click on the key or the subkey that you want to back up.

  e. click on the file menu and then click export.

  f. in the area Save in , select the location where you want to save the backup copy to, and then type a name for the backup file in the file name box.

  g. click Save.

  Follow these methods to the weather app related question:

   

  Method 1:

  Run applications troubleshooting

  I suggest you to download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

   

  Method 2:

  I suggest you follow the steps in the article. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Use the following steps for Internet Explorer related question:

  You could have this marking it from the start screen.

  a. right click on the Start screen.

  b. click on applications and then right-click on Internet Explorer.

  c. click on Pin to start.

  Let us know the status of the issue. We would be happy to help you.

• Problems with creative cloud: will not display Apps, won't uninstall anything!

  Problems with the creative cloud and iMac 27 "8 GB running Yosemite (10.10.3)
  Creative cloud does not display any apps or tabs within its interface. (see first attachment)

  I tried the update of the creative cloud app, but it doesn't matter.

  I tried to delete the file opm.db

  I tried to delete all the content of the OOBE folder,

  I have tried to uninstall creative cloud - but can't because of the dependent applications.

  I have tried to uninstall the individual CC Apps that I had installed (CC, CC2104 and CC2015) - However, it says that I need Application Manager to do.

  I tried to install Application Manager, however, I get an error of installation (see second attachment), which advises that I have 'Get Adobe Support Advisor'.
  I tried Adobe Support Advisor, only to be told by the link that the product is no longer supported.

  I also tried making a secure boot, then launch creative cloud - has always had the same results

  I zapped PRAM to see what would help - nuthin'...

  When I go to Adobe.com, it shows that I am connected. However, I get nothing in the application of the CC.

  CC Apps seem to work properly - for the most part, but I can't access CC libraries which is essential for the work I am doing now.

  Please notify.

  Thank you

  

  

  If you have not tried steps below, try it once:

  Launch the activity monitor and the force quit all associated Adobe process as well as processes such as installation, Setup, PDAPP if installation running.

  N ° 1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  Step 2)

  Trash Adobe Creative cloud folder from Applications as well.

  Step 3)

  
  

  (1) right-click on the icon in the Finder, then select the option "Go-ToFolder .

  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.

  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.

  Step 5)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  Step 6)

  Click on the link below and download Adobe Application Manager and install the same:

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

  Once the update is complete. He shud launch Adobe Creative Cloud app.

  Note:

  About uninstalling Adobe creative cloud app, you can also try Uninstaller CC running:

  Uninstall the Adobe Creative Cloud desktop application