Problem with my all-in-one c309a print - prints not bed.

Similar Questions

• Dell 964 all in one Photo Printer not Scan

  I have a desktop Dell Dimension 3100/E310 with a Dell 964 All In One Photo Printer.  I have Windows XP on it.

  I had to re - install the printer drives and software.  I can get the documents to print correctly.  I can get the printer to scan by using the controls on the printer.  However, if I try to scan from the Dell 964 all in one Center on the computer, I get an error message that says:

  Scan failed

  Try these solutions:

  * Make sure the all-in-one is powered.  (IT IS).

  * Disconnect and reconnect the USB cable.  (I DID.)

  * Disconnect, then reconnect the power cable from the all-in-one.  (I DID.)

  * Restart the computer. (I DID.)

  Nothing has worked.

  Does anyone have any suggestions?

  Thank you.

  ColemanCreative,

  You should be able to scan from the Dell all-in-one Center.

  Make sure that the application that you want to scan to figure on the list. Try to read...

  Update of the list of applications to send scans to

  If you are trying to scan to a PDF or by fax, you must install the OCR program from the disk of the printer.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• HP Deskjet 4535: Problem of Hp all-in-One remote printing

  Hello

  I bought a Deskjet 4535 all-in-one last week and there was a problem printing word document using the all-in-one remote application via the iphone.   Impressions of thin paper thorigh the laptop wireless, but when you use the remote, the content document appear to have shrunk - while there were four pages originally, now the output is adapted in three pages, with the smallest font size.   I tried to manual pagebreaks on all four sides, but it still shows the same.  Document has been prined in the dropbox, both laptop & iphone folder.

  Help, please.

  Hey @drappoo,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing from the HP all-in-One remote app on your iPhone to your Deskjet Ink Advantage 4535 e-all-in-one printer. I can help you with that.

  What is happening, that is when printing from your iPhone or iPad, that the camera takes a picture that is displayed on the screen and print it. If things appear smaller so he has to solve is to change the size of the text to a larger size, and then change the zoom on the camera settings. Once you do this, you should be able to print all the greater.

  If you're still not print correctly, by uninstalling and installing the HP ePrint app should help you with that.

  Please let me know the results after following the above. If you are able to print properly, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• All-in-one HP 1514: HP all-in - one 1514 print not because upgrading windows 10

  I have upgraded to windows 10 and since then have not been able to print from my computer. It is connected via USB.

  I can print test pages and conduct analyses, but when you try to print a document or email, it cannot communicate.

  I've done all the windows updates available for me, I've updated the drivers, I downloaded the e-all-in-one HP Deskjet 1510 serial printer drivers and full software functionality and followed the instructions. I have uninstalled and reinstalled the printer and restarted the computer after each retry.

  At first, he said that I needed to connect the USB key (even if it was connected). After uninstall and reinstall, it finally noticed that it was connected, but still will not print.

  Help, please...!

  HI @curl79,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Deskjet 1514, after the upgrade to Windows 10. And I'm happy to help you!

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Wait for the software to tell you to plug in the USB printer cable).

  Once you complete these steps, run the program printing HP and doctor Scan and let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that these aid measures and hope to hear from you soon!

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• Problem with F4280 all-in-one to scan / Vista

  Document scanning or the picture comes out as a total black page. Has been no change before problem appeared.

  Best regards

  Sossou

  Hi Schouw,

  Looks like it could be the scanner bulb or the material.  Please try the following steps:

  1 make a copy black & white of any document you have handy. Keep a close eye on the print, if you see the machine starts printing a large band of black on the page, and then press the button "Cancel" (red X) to stop printing.  In this case, it is the material.

  In an attempt to adjust the equipment, please follow: lines or streaks in the Copies or Scans

  If this does not work, you will have to HP to find out what your phone options: http://welcome.hp.com/country/w1/en/support.html

  However, if the copy is ok, then could be a software problem. Please try this instead: http://support.hp.com/us-en/document/c00040499

• Driver problem Dell v715w all-in-one (AIO) printer

  I'm running a 64-bit Windows 7 system, and I have a problem regarding the installation of the Dell v715w printer driver. I tried to do the reinstall and install in the turn of mode vista service pack 2 compactabilite. No luck there.

  I don't know if this is due to a not previous complete uninstall of the printer driver that causes this problem? Or this printer just will not work on Windows 7. If anyone can point me in the right direction that would be wonderful. Thank you.

  You certainly shouldn't need for Vista SP2 compatibility, good for WIndows 7 64-bit drivers are on the Dell Web site at:http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=PRN_ALL_V715W&os=WLH&osl=en&catid=&impid= and there are also updates firmware for the printer that you should probably try to install everything first.

  If the driver software package does not work, then right-click on it and select Run As Administrator, that should work.

  Don't forget to unplug the printer from the PC and restart before beginning the installation, and do not connect the printer until the software tells you to do.

• SCAN UTILITY DOES NOT WORK WITH MY ALL-IN-ONE PRINTER

  Dear team,

  I am facing a problem with my all-in-one printer model "HP officejet 6500 e709 a" as it comes to the Analysis ToolPak.

  In other words, I am unable to scan documents because the sistem highlights me that it requires the software HP Photosmart (... I don't really know the reason why it back doesn't work anymore)

  Unfortunately I'm not able to find the original cd supplied with the printer, so what I can do to fix the problem.

  Thank you indeed for support kindly

  Annita bottle

  [email protected]

  Hello Annita1950,

  Please try the below mentioned steps...

  1 > open the directory C:\program imaging\bin HP and then search for the following file: hpiscnapp.exe
  2 > right click on it and then select Creat shortcut on the desktop.
  3 > now get on the desktop and double-click the shortcut for hpiscnapp.exe open a window.
  4 > click new scan to start the search.

• Scanning with HP all-in-one printer with fax and scan Windows in Windows 8

  When you install a printer driver in Windows 8, you can scan from your computer without having to install any additional software to HP. This is particularly useful if you want to or not does not require the full functionality software or if your printer does not have a driver to scan for Windows 8.

  Windows Fax and Scan uses a Microsoft Service called WIA (Windows Image Acquisition) to capture an image from the scanner and allow you to save without the need for additional drivers.

  In addition, Windows Fax and Scan cannot scan to PDF.

  Learn how to analyze with your all-in-one printer from HP using Windows Fax and Scan.

  If you have problems using Windows Fax and scan with Windows 8 make a post below. I hope this helps anyone looking for an alternative method of scanning in Windows 8.

• HP Deskjet All in One 3545: printing problems

  1 shows low ink icon. A left less, just half. Thought b & w cartridge is low. Ordered and this has changed. Print an alignment page. During the printing of new document, new alignment message came. Returned and gave the print order. Print a faint fary. Check the ink level. Right and left less. Stop printing. What needs to be done?

  2. when the printer is on, sound of NEEQ move is not smooth, little stumble.

  3. If put more than one paper in the tray, all are drawn in and then deported without no printing. Even place a paper displays the message that says to remove the paper and place it again in the status bar.

  4 visit to a mechanic charges are prohibitive.

  5. help online?

  6 resets useful?

  7 printer is in mode (wi - fi) network

  Hey @Achyut18,

  I understand that you have some problems with the printing of your Deskjet Ink Advantage 3545 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done this document describes How to solve print quality problems with your printer. If after completing the document, you still have problems with print quality, then the cartridge will need to be replaced. Please find below the link to contact HP support.

  It seems that you may have had a problem with collection of paper in the printer. This document explains How to solve problems of choice. If after completing this coument you are still experiencing problems with pulling on the paper then the printer will need to be replaced. Please find below the link to contact HP support.

  If you are looking for other support options, from real cartridges not refilled to replace, or if the printer needs to be replaced so you can contact HP support directly by clicking here and filling out the form below.

  I hope this helps with your problems and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Photosmart all-in-one D110a: printer

  I installed a new ink cartridge, but the printer will not print the alignment page.  Now the screen says 'print alignment page.'  There is a big red X and the power button flashes.   I turned off, checked the cartridge, disconnected the power and have reinstalled the printer, but none of these things have solved the problem.  I can print a page from the computer, but can not copy or scan.

  Hey @SandyTP1,

  Welcome to the Forums of HP Support!

  I see that printer e-all-in-one D110a Photosmart will not print an alignment page or align. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve problems of alignment with your printer.

  If after the above, that you are unable to align, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know the results after following the above. If you can align or reach a resolution with the support, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• F2110 All In One HP: Printer prints blue instead of green

  I have an All In One older printer that worked perfectly for me. I tried to print something last night and every time the green color was susposed to print blue print instead. I replaced the color cartridge and still have blue instead of green. I tried everything I can think but can not get the printer to print in green. The strange thing is that I photocopied a picture with lots of greenery and it printed perfectly green.  Any ideas will be greatly appreciated.

  Hi @andalcam,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a printer all-in-one of HP Deskjet F2110 with computer Windows 10 and green print blue, but the colors are just when you copy. I would like to help with that.

  The fact that it can copy well little indicates that the printer should work. Here is a document of support designed to be used with this problem so you can be sure - colors wrong.

  Then download and run the HP print and Scan Doctor to verify installed software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

• I have a hp photosmart C6380 all-in-one and it will not print

  PRINTER

  I have a hp photosmart C6380 all-in-one and it will not be printed. Saids it is disabled in case of problems and it is not off! Tried to turn it off, then comes back on but still saids its judgment. What should do?

  Hello

  Make sure that your print spooler service is started.

  At this point, on your computer, check the status of the print spooler service. Restart the print spooler services.

  a. Click Start, type services.msc and press ENTER.
  b. scroll down to print spooler.
  c. start the print spooler service.

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.