Problem with still DVD CS6. Cancellation writing disc

Hello. I need help - I have a problem with Encore DVD CS6. When the DVD disc is written the end of the process program cancel displays this text: "Still could not complete the operation due to an error in hardwar (detection code 40902)" it is in mac os. In windows, the problem is the same but the detection code is 300200. What is it?   Disk space is sufficient.

As a test, generate an image rather than burn them to a disc.

Sense errors are usually, but not always material.

You use the same drive (external?)? Are you using the same disks? (Sense code errors can be disks.)

Many of us don't burn ever with still, using ImgBurn for PC or for Mac toast.

Tags: Encore

Similar Questions

  • Satellite P30 turn off - also problems with burning DVDs

    Hi Please help me.
    I had a row with my brother and it won't help.

    My Pc is only a year old and it turns off. I would say it was because of overheating, but he just did and it isn't really that hot.
    I put on the books, not on my knees, keep him away heat, crash back to the desktop.
    It makes me crazy, please, any help or advice or anything like that would be a great help.

    I also have problems with my dvd burner, always, he gets to about 17% and said that there is a mistake, thought it was the discs but surely it can be all 100 of them, I tried turning on and off but no use.
    Also the advice would be great!

    Please help a girl in need of a working Pc! Who does not know a lot of technical stuff!

    Hello

    Overheating problems usually occur because the cooling module cannot work properly.
    Fans are unable to work because of the dirt and dust inside the laptop.
    The best way to clear the fans is to use the vacuum cleaner.

    On the problems of DVD writer: well, it's not easy to say why it happens. Have you checked media dvd from different manufacturers? Many CD/DVD media works differently, and you should check it out.
    In addition, there is a problem with the burning software. I put t know what application you're using, but you should try to use Nero. It's very nice software and I m very happy. Check it out

  • Problems with the DVD on Pavilion dv6-2010sa

    HP Pavilion dv6-2010sa laptop computer (under Windows 7 x 64), I bought less than a week ago.

    I started the disk recovery software to back up my OS in the event of future disasters.

    I used a DVD + disc, so it would take 3 discs to do the recovery disks.

    First DVD completed successfully. Software asked me to enter the disk 2.

    This is where I started to have problems.

    Drive recovery software couldn't recognize my blank dvd +.

    The drive makes a lot of noise, but then stopped making noise.

    I tried a few other DVDs +, but to no avail.

    I rebooted the computer laptop and tried but same problem.

    So I tried to play a dvd movie to see if it was the disk recovery software or the dvd player.

    He would not play a dvd movie.

    I also tried to play an audio CD but the same problem.

    The drive icon appears in Windows Explorer, but does not display any info (or open the CD / DVD) when I have a CD or a DVD in there.

    So it seems to be a problem with the DVD-> grateful not any CD / DVD

    If someone can advise?

    PS. I searched the driver DVD (so I could Reinstall driver) but the HP Web site does not contain the driver for 2010sa (DVD software only)

    Thanks in advance

    Gary

    Problem solved.

    Uninstall the device dvd player:

    -Device Manager > do a right-click post dvd/cd player > uninstall the device

    Restart the laptop and OS will reinstall the driver and the DVD/CD drive should start working again (well this is what has happened to me)

  • Having a problem with my DVD player with regard to media playback

    Hello

    I have recently had problems with my DVD ROM read drive media correctly, when I put in a computer game (lets say Star Craft 2 as an example at random) Autorun makes me up some options and says it's an image and request either 1.) Open the files and view them, or 2.) See all photos in Windows and some other similar options.
    It will not recognize the game as a game and will not bring up the menu to install the game or whatever it is, sorta solve this problem I put the automatic run settings so that it opens files in the photo (since it is the software game image processing) and once he opens the folder I click on the installation program manually.
    I checked my driver to ensure that it is up-to-date.
    For any help or suggestion will be welcome.

    SOLVED!

    I found out with a little research it was Vista blocks the autorun.inf files in games and keep them to read and run the .exe files automatically and so he held a photo, thank you for the help and suggestions.
  • SOLVED problem with my DVD/CD _

    Hello

    I have a problem with my DVD/CD. Although Device Manager says, "this device works properly.". It does not at all.

    I'm very suspicious of the cable connections. The cable has been severely pinched by my grandson. It did not close, and instead to find the cause, he forced its closure.

    So what I want to know is if I can buy the cable online and install it myself.  I have searched but cannot find a place to buy one, and although I searched on the Dell site, I couldn't find anything there either.

    Thanks for reading...

    Inspiron 5721

    Op - MS Windows 10 Home system

    Intel Core i7-3517U

    BIOS - Legacy mode

    RAM - 8 GB

    Name TSSTcorp CDDVDW SE-208DB USB Device

    I appreciate the responses and suggestions.

    I finally got my problem solved by replacing the CD-ROM unit.  I was lucky enough to get an opportunity from a computer at a price store very low. If all goes well.

    Thanks again to all.

  • Problems with stills...

    I notice a problem with stills in 5.0.3. I have a few projects underway right now who are all still images, and every once and a while body confuses the image files.

    Example - I've got 2 images... one called mirror.jpeg and the other mirror3.jpeg. Mirror.jpeg thumbnail is correct, and I can play the image on the fine timeline. But when I try and use mirror3.jpeg, it comes up with the thumbnail for mirror.jpeg (different image) and if I double click on it in the sandbox, the false image (mirror.jpeg) opens in the source monitor, and if I drag the on the timeline... you guessed it - fake image.

    Now, if I mirror3.jpeg right click and choose Edit in Photoshop, the correct image opens up there.

    Anyone else seen these behaviors?

    example.jpg

    Eric,

    A test, you can Mirror3.JPEG open in PS and do a Save_As with a completely different name, see Face_03.JPEG? Then import this new image saved in PrPro, replace Mirror3.JPEG. The correct thumbnail is displayed now, and play the good image in the Timeline.

    Good luck

    Hunt

  • Problem with burning DVD DL

    Hello

    I have problems with burning double-layer DVDs in Encore.  I noticed another recent post - I don't know if this is the case http://forums.adobe.com/thread/827366?tstart=0.  Before you start buying and replacement of equipment, I thought I'd get tips here.

    The problem - my first burn contained several places where the video pauses when played on a DVD player.  To determine that the DVD drive is not faulty, I then played the disc in the DVD of PC burner and encountered the same problems.  I burned another disc of in yet and most of the problems have disappeared.  There are still places where to get a break.  It is likely that the DVD burner is unreliable or dying, or is there something a pc or a point of view that I should try?

    Some info:

    The original material was made in PrPro CS 5 without rendering quality max and without depth max.  CS 5, it is imported with the rate of 9.4 and transcoded with quality = high quality 7MB VBR 2 Pass and av NTSC setting flow max = 9.4mbps, rendering quality max, and and the mpeg-2 codec.

    Hardware - Core 2 Duo, 4 GB 1066 DDR2 RAM E6700, Nvidia GTX 480 with MPE hack,

    DVD burner - Plextor PX - 755 has.

    OS - Win 7/64

    Additional notes:

    I need to burn DL disks by starting again with admin rights.

    The problem does not occur with dvd discs single layer.

    Thank you

    Steve

    I always use again to create an ISO on my data disc and then use the FREE

    http://www.imgburn.com/index.php?act=download to write the disc

    In Imgburn, I check the slowest possible speed burn and to DL, I always use Verbatim

    Never a problem

  • Windows has encountered a problem with the DVD/CD on Qosmio G20

    has obtained a g20, problems with the cd player. When I go to copy or move music or pictures on my cd/dvd, I get a pop up saying windows has encountered a problem with this drive...
    can someone tell me what is happening.
    Thank you

    On this path, it is not easy to say anything. Try to remove the drive from Device Manager, and then restart the device. The unit should be recognized and installed correctly.

    If you want to create data CDs using windows options please check disc recording option. Check the properties of the drive and check option under the recording tab.

    Good bye

  • Problem with recovery dvd - Win 7

    Hello

    After you perform a clean installation of Windows 10 I had problem with closing down my pc, it's a bug to win 10. So I decided to reinstall Windows 7 on my Acer Aspire M3920 of my recovery DVD made by Acer eRecovery management.

    The problem is, Setup stops and the #1 restore disc pops out after that the files were loaded from disk and is ready to begin the installation.

    This is the message: "there isn't enough free disk space on the drive for the files needed to continue the operation.

    PS: Before installing Windows 10, I deleted all the files and partitions on the hard drive. Maybe it's the origin of the problem?

    Someone who can help me?

    http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
    Download the .iso file
    then use a software to burn CD/DVD or USB flash drive and burn the .iso file
    Once completed, put the CD/DVD/USB on your PC, boot from CD/USB (maybe you need to start under the legacy if you have the UEFI BIOS)
    Press F12 on startup and choose the CD or USB
    at the level of the Office
    Select your HARD drive
    Right-click on the icon for your HARD drive and choose completely erase your HARD drive (it will erase any GPT or MBR at the disk), choose the first option after selecting the clear function.
    Exit the wizard partition, boot from the BIOS, UEFI return of the Legacy (if you have the UEFI BIOS) and boot from media erecovery.

  • Problem with Windows DVD maker, Windows Vista Help

    I work with windows vista movie maker and dvd maker programs. The premiere of the film looks fine, however, after successfully burn on a DVD - R disc, the selections of chapter on the display of pages 2 and 3 for a few seconds, then the screen goes black for a few seconds, then returns to the chapter selections. How can I solve this problem? Thank you

    Wow! It is a large complex/project... more
    systems would never be able to make that
    in a DVD.

    It is possible that uncheck the filters would be
    improve the question...

    See the section "what to do if you have questions.
    in the following article.

    How to burn DVDs with Windows DVD Maker
    http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

    I'm guessing that you are under Vista Movie Maker 6?
    The only new version would be Windows Live
    Movie Maker and I think most users would
    not to call it an 'Upgrade '.

    Personally, I suggest making small
    projects, or even a first part and a second part on
    two DVD.

    If you save your Movie Maker projects to DV - AVI
    format and when you import within the limit of the DVD Maker
    the total duration of about 1 hour for DVD
    You can have the best video quality.

    See you soon.

  • Problems with burning DVD in DVD Maker

    I made a movie of pictures, added music, added entertainment, got my move perfect BUT when I try to burn it in DVD Maker, my problems start... I hit burn and my photo of some jump to the top out of sequence of the film, play a second time, but when I play my movie, he plays right.  How can I burn my movie with photos in the wrong order?  What can I do?  This film is should be a gift, but at this rate, I'm about to give it up...  Can someone help me please?

    Hi Teresa,.

    Thanks for posting your query on the Microsoft Community.

    I suggest you follow the below Microsoft article and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows/Troubleshoot-creating-video-DVD-Maker#1TC=Windows-7

    Follow the below to reference Microsoft article.

    http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

    Thank you.

  • I have a problem with After Effects CS6

    Hello, I recently found a problem with Adobe After Effects CS6, whenever I open it, it just says: error: unknown Exception, my trial is still ongoing and I really want to test this thing out successfully.

    These questions below may be for a different product... but the KIND of information that you must provide is the samefor the products you use

    Need someone to help... more information please click below and provide the requested information

    -Premiere Pro video Editing information FAQ http://forums.adobe.com/message/4200840

    -WITH brand/model graphics card (ATI or nVidia or?) and driver version

    -Have you updated for latest Mac or Windows operating systems?

  • Failures/intermittent problems with Optiarc DVD +-RW AD - 5560 has

    I have an Inspiron 1720 laptop running Windows Vista. June 1 the DVD drive was declared missing. The Device Manager said "this device cannot start. Code 10. " Looking for solutions? "Could not load driver software. A chat with technical support solves the problem by taking control of my computer and do something in the system registry.

    Two weeks later I couldn't eject the CD that had just been snatched. Restart solved that problem.

    Today, the original problem described above reappeared.

    Technical support advised that, so that they can keep fixing these problems Dell will not replace the disc if the warranty does not expire until October.

    Everyone knows the same problem with this drive and what do I do to fix this?


  • Problem with CD/DVD on a Satellite of 1135 drive

    Hello
    My computer does not recognize his own CD/DVD player. It works fine, but after I ripped some CD and watched some DVD over a short period of time all of a sudden the drive disappeared from my computer and Device Manager, as if it did not exist. I left the computer off for 24 hours and she came back. This worked well for a few days, but now he disappeard, this time for good. Is there anything I can do myself to fix? I would be grateful any ideas...
    see you soon
    Ka.

    Hello

    You can try to sett the OS returns with the XP system restore setting. Maybe something damage your running system. It's the best way to solve it!

    If this does not work, you can look in the Device Manager if the CD is detected in a right way!

    You have all runing tools which can occure problems with the CD player, as Manager of the speed of the CD player or something else!

    Rudi Bye

  • problem with TSSTcorp DVD +-RW Drive SN - 208BB driver

    Hi I have a laptop Inspiron Windows 8, only about a month and the DVD continued to show.  I put a cd or dvd and shows nothing.  He makes noises but doesn't show anything.  I ran a material and problem solving devices and it says there is a problem with the above drive and the USB-drive IF port.  I select apply this fix, but it says it can't be fixed and the driver must be reinstalled.

    Ive tried to find this driver on the dell website, and I can't seem to find it.  I think it's a Toshiba product but am really stuck now.  Can anyone help? :(

    Hmm, well I went into Device Manager, uninstalled and it did something and came back!  I tried the same thing with the USB driver, I had trouble with, but who did not return :/  Hmmmm...

Maybe you are looking for