Similar Questions

• Should I bother to install the KB3177467 update? Everyone says that they have problems with the PC after installation

  Need to know what to do...

  Hey Kevin,

  We strongly recommend that install you it as it is intended as an important update. As noted on the article on KB3177467, Servicing stack update is one most important elements for the system and it contains .dll files that will allow your computer to be able to run even better.

  If you have a problem installing it the update of Windows, on the same link provided above, you have an option to install the stand-alone Installer (32-bit / 64-bit).

  Let us know if you have other concerns.

• Problems with the product key

  I have a mac book pro which has a partition with windows 7 pro (I SOUL, in the way that you need to restore the computer whenever you need to use the window). I installed fusion 3 for both systems without having to restart. I deleted the partition and tried to reinstalled the window. now, I have a problem with the product key, what can I do?

  Hi Lumareli,
   
  What is the error you get when you enter the product key?
   
  If you have difficulties to activate Windows 7, open the Windows Wizard of Activation in Windows 7 to use the phone and activate Windows:
   
  Try this and wait for a real person and explain what happened:
  
  a. Click Start, then in the Find box type slui.exe 4
  b. press enter on your keyboard.
  c. Select your country.
  d. Select the telephone activation option, then call and hold to a real person.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• Can not activate Win 8 - reports of problems with the product key

  Hi all

  I have just downloaded 8 Win and tried to upgrade my existing Win 7 Home Premium VM, which I run on VMWare Fusion 5.0.1 on my Intel MacBook Pro 2009. I wasn't able to do the upgrade in place - the installer told me that it was not possible to run Win 8 on this machine. Instead, I created a. ISO file and used to install Win 8 in a new virtual machine. Everything works fine, but I can't activate Win 8. The error message tells me that "something is wrong with the product key" even if I could install Win 8 with the same fine product key.

  I called various hotlines MS today but don't have anything got no solid advice. Am I the only one who experience this issue? Is there something I need to pay attention during installation of the virtual machine to win 8? Is it possible to install a fresh VM with a key product upgrade in the first place? I would appreciate any information you might have on this subject.

  Thank you in advance and Bravo,

  Georg

  Hello

  Had the same problem after installing Win 8 Pro Upgrade on Fusion 5. Follow-up to "How to do a clean install on Windows 8 Pro Upgrade VMWare Fusion" here, problem solved (for now).

  http://www.moosooboo.com/tag/clean-install-on-Windows-8-Pro-upgrade-in-VMware-Fusion/

  Good luck

  JKB

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• Problems with the condenser after the recent update tool

  We have problems with the condenser so tool. The filter works correctly, but after a 'white' to use (looks like most exposed) rectangle remains in the image that cannot be deleted. We tried different layer modes without success: it does not react or the rectangle disappears but both the effect of the filter. Seems to be a bug (?) - Please help us as soon as possible. Thank you!

  Hi meuschke,.

  Our engineers are working on this issue, in the average as you try the below work around.

  After you change a 16-bit image using the Liquify Filter, edited areas are lighter than the rest of the image.

  Solution

  In the meantime, there are two solutions:

  Use pictures 8-bit instead of 16-bit images with fluidity

  Disable the GPU use to liquefy holding the key Option (Mac) or Alt (Windows) key down while you select the Liquify Filter in the menu filter.

  Related link: with the help of fluidity on the results of the 16-bit image areas clearer around changes

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Problem with the gallery after update 2.3 music

  Hello

  Recently updated my XperiaX10i (French version, not operator sim locked). No problem with the update itself and the phone seems to work fine.

  But, the music gallery has first not detected music files already in the sd card 32 GB (no problem for photos, videos or other files), and does not so load in the library. I had to download them all again through Media Go and now the library shows them, but album covers are not more in the album list as in version 2.1, which was very convenient for the selection, however the sleeves appear in the background during playback of a track: this looks more like a bug than anything else.

  I am also missing the first Quick Launch bar application for Wifi, Bluetooth, GPS, sync and the brightness of the screen, it seems that the launch of all these features to go into the settings file now.

  In conclusion, I hardly see what exactly improved on this phone since version 2.1. except maybe the speed and the quality of the screen display.

  Update from 1.6 to 2.1 was a total revolution in comparison.

  Power control widget is always there

  

• Problem with the Package Windows Installer... when trying to install ITUNES 9.2 and Quicktime.

  I bought an IPHONE 4 yesterday.  For more than 7 hours, I tried everything to download ITUNES 9.2.  I get the same error.  I spoke with apple as Microsoft.  I didn't PAY to get assistance from Microsoft yet and I hope I don't have to.

  Error: problem with the Windows Installer Package.  A program required for this install to complete could not be run.  Contact your provider to support personal or package.

  I have Windows XP.  I uninstalled and re-installed Safari and which did not help (at one point, I had problems with Safari).  I also have at one point received an alert on 'applesync.notifier' could not be executed.

  I have no idea where from here, but I'm frustrated.  I want to use my phone for something more than "just a phone" and I can't.  I have to carry my OLD Iphone (1st generation original).  Help<><>

  There is a simple way to do it!

  I had this problem too, but I did

  first open Installer u then let it install

  When you get the messege, click ok and it will say restoration of action but don't get put off by this cause after 5 min, it will say: it is installed and restart your computer

  hope this has helped

• Problem with the downloaded file (Installer cloud creative)

  I reset my computer and upgraded to Mac OSX 10.11.4. I downloaded Creative Cloud Desktop install but in the middle of the stage 'Download', I get an error 205 "it seems to be a problem with the files downloaded.". I checked the firewall and connectivity issues and everything is ok. This is just like the installer is corrupted.

  Clear Tmp folder.

  Make sure the option "use FTP mode passive mode" is unchecked in the proxies tab.

  If you are using a wireless or Wifi Internet connection, try wired Ethernet connection.

  Always the same? or who already use the wired connection.  Try live delayed creative cloud Installer.

  N ° 1)

  Click on below link and download page of 6 CS open, do not download anything from there, just keep it open.

  Download Adobe Creative Suite 6 applications

  Step 2)

  Click on the link below and download file CC to install offline DMG and use them to install the desktop CC app and check.

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_6_0_248.dmg

• Satellite P200 - 14 H - problem with the software after reinstalling Vista whindows

  I have a Satellite P200 - 14 H, who bought systems Activ of Romania. I got a Toshiba DVD with an image pre-configured Windows and my driver's license windows vista Home premium. After several blue screens windows crashed after 5 days. It was a software problem. I am a network administrator and I need several virtual machines Linux vmware server Windows.

  The DVD provided with the laptop is not really suited to my needs to reinstall windows because it throws my entire hard drive and is not an option. I took a friend a DVD windows vista Home premium and using my key from the sticker on the back of my laptop I reinstalled win without deleting all of the hard drive but only the partition c. I downloaded all the drivers of your site even if I found them really hard (model PSPB6E because that model PSPB6E I don't find it anywhere) everything is good except that "Flash Cards Support Utility" and «» Hardware Setup' give me the following error: "serial number is invalid '. I don't know what to do to be able to use the function keys I knew which are installed by 'Flash Cards Support utility'.

  If it is not good that I did give me another solution that does not need to wipe entire HARD drive, but only the C drive and use the DVD that you have provided or give me access to some place to be able to download all the drivers and software that can be found on the original DVD (those above and to burn DVD and Norton internet security center and so on)

  Thank you very much and please be so kind to give me a solution quickly because I really need this computer and I am unable to use it.

  Hi Adrian

  I'll try to clarify a few things;
  First the drivers for Satellite P200 - 14 H PSPB6E series are placed on the page of Toshiba Europe and it of really not difficult to find.
  Secondly the Vista serial key, which is located on the bottom of the unit cannot be used with another copy of Vista OS! This will not work!

  You have installed the operating system Vista from the CD to friends, but you used a serial key that does not match with the Vista on CD to friends! As a result, you get the message error "serial number is invalid!"
  The utility of Flash cards is required to use the keys FN under Win Vista. It visually shows the use of the FN button.

  I would recommend another way of installation
  First, you must use the DCD from Toshiba recovery. Back up your data first!
  Then after installing the OS, create a new partition and install your favorite OS (Linux, XP, etc.)

  If you n t to use the Toshiba recovery but CD the original Microsoft CD Vista then you need to use the original series OS key that belongs to the MS Vista CD.

  Good bye

• Problems with the files after upgrade of Sierra

  Installed at Sierra 10.12 4 days ago on my 2010 IMac running Lion 10.7.5 did not a specific backup on the hard disk running on time machine assumes that the last backup should be sufficient.

  1 problem is that my 15 000 pictures present date instead of filing in the events as they have always been.

  2 mail seems lost several mailboxes that I had installed in the margin to quickly drag and drop INFO and interesting technical questions.

  3. I have a stream of photos don't drop-down after a few days, which will not go away it just keep reappears not no this that I still need it for.

  4 never used the cloud but considering buying iPad and dumping of my old Apple laptop not likely with the capacity of 128 GB.

  A year ago, Apple went from iPhoto to the new Photos app. If you have questions Photos I would re-post in this forum. Can be found the link to it by clicking on the Photos for Mac

  About your mail, try to rebuild your mailboxes and if this does not work, you may have to re-create the mailbox store that you had previously.

  On the planned purchase of an iPad, you have a question or was it just a comment?

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.