Problem with the DisplayPort W510-> HDMI connection

Similar Questions

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.

• Problem with the laptop does not connect to wifi.

  I have a new laptop to windows 8 toshiba still in the menu setup and he asked me to choose my wifi so I did and put the password and its says unable to connect to wifi, all other laptops and tablets are connected to wifi I chose but its only the my laptop which does not connect. What should I do?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the exact error message?

  To solve the problem with Wi - Fi internet access, you can follow these methods:

  Method 1:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2:

  I suggest to refer to article and follow these steps:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the results. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Problems with the web interface of connection vcenter 5.1

  Guys,

  What don't understand me, I've set up a new virtual appliance version of vcenter test 5.1, I can connect just fine using vsphere client and console, but the web interface refuses to agree with the same identifiers. What is happening with this single sign? I really do not understand.

  You guys could help me please?

  I stumbled upon this same question.  5.1 with the search service is completely different than 5.0, this is why the others are not working.

  Here's what I did to solve the problem.  I turned on the regeneration of SSL certificate:

  1. Navigate to https://[IP]: 5480 and connect
  2. Go to the Admin tab and press the button "Toggle the setting of certification" until activated regeneration 'certificate' displays Yes
  3. Go to the network tab and change the host name.  This will trigger a regeneration of SSL (or you can change the ip address).  I don't know if change 'localhost' to something else helped, but it can't hurt.
  4. Restart the box (restart System tab button.)

  At this point, you can look at the start-up of the machine of vcenter console messages.  You will notice some messages about detection of a new hostname or IP and regenerate a new certificate.  You will see all the services to import it again SSL ceritifcates so.

  At the end of the reset, I was able to connect to the web client to vCenter!

  HTH

• HP Pro Book 430 G2: Problem with the installation of a connection Wi - Di

  
  

  Hello:

  Your laptop must be one of the Intel wireless cards listed in document go2 posted.

  By your own words, you stated that your model has the Realtek RTL8723BE card without wireless/bluetooth, which is absolutely not capable Intel WIDI.

  My laptop was even one of the listed Broadcom cards, and tool updated WIDI reported «this platform does not support the Intel WIDI.»

  I had to change the map for the Intel 7260 dual band Wireless-N card, and subsequently WIDI works beautifully.

  Specifications for other laptops HP indicate that models with the wireless card that your laptop is home to Miracast.

  Realtek article also speaks to them be selected for Miracast.

  http://www.Realtek.com.tw/press/newsViewOne.aspx?NewSID=273&langid=1&PNid=0&PFID=1&level=1

  I don't know a thing about Miracast, so I don't know how you get the laptop to connect using Miracast technology.

  I thought you had to run an Android device for that.

  But you can try until the cows come home, home and WiDi won't work on your noteboook as it is currently configured if it has any other wlan card but an Intel, one.

• Problem with the HP Photosmart C4780 connection after moving

  I recently moved into a new place, so, get a new router, connection. Since I moved, I was not able to connect my printer (HP Photosmart C4780) to the wireless network. When I try, an error message indicates that the IP address of the printer does not match the one on the PC (a Windows 7 32 bit). How can this problem be solved? Thanks in advance

  From the front of the printer: [Scan] Setup > network > network by default.

  Now run the HP software to add your printer (start > all programs > Hewlett-Packard > C4700 series...)

• I have a problem with the wireless is not connecting on the computer.

  I have my adsl connected by Ethernet to my pc but it does not work when I take the cord Ethernet how to pass Ethernet Wireless on the pc?

  Hello
  Is your ADSL wireless router option supports?
  If Yes, to connect to the ADSL router, go to Wireless ADSL router, enable the wireless option and set it up using your ID and password provided by your service provider, connect.
  You can configure a dedicated connection to your PC using the MAC ID and by doing that you can limit the other device to access your wireless network.

  Implementation process

  1::Sert Cook addaress PC IP is equal to the router IP address range
  2::enter Roter IP in the URL box
  3::go to wireless to the router configuration
  4:enable wireless in the router setup

• Problem with the network connection security

  When I try to view certain websites, I get an error message that says: "there is a problem with the security of your connection Metwork. In addition, a friend just sent me a copy of an e-mail that was sent to him. Apparently, someone must have hacked into my email account, has obtained my contact list, created an e-mail account using my name and sent e-mails to people on my contact list.

  How can I fix the problem with the warranty of my network connection, and what I can do on the pirate e-mail contacts list?

  Can you give an example of the websites that you see this 'error' on?

• 13 d-0016nl envy: problems with the HDMI audio

  Dear Sirs,

  Due to some problems with an engineering program I had to reinstall Windows 10 on my laptop. The version of Windows is the same of the one installed on the laptop when I bought it. Before the laptop with HDMI audio installation worked fine, but then, while the HDMI video continues to work well, the audio turns off directly from the laptop, such that the cable was not connected.

  I tried to activate the 'reproduction devices' HDMI connection, but I'm not able to do this because it's as if the cable is not connected, and the HDMI connection icon appears as gray.

  I tried to update the audio driver, but it didn't work, so I tried to download and install the latest version of these drivers from the hp site but neither this worked.

  Can you help me? The laptop is quite new and I would like to solve this problem without using 2 different cables to connect also a speaker with a cable to the because the HDMI does not work as it should.

  Thanks in advance,

  Martina.

  You are the very welcome, Martina.

  It would be the graphics driver you need install the HDMI audio driver...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• Problems with the maintenance of my 32D3453DB Smart TV connected to the internet

  Hi all

  I recently bought a Toshiba 32D3453DB Smart TV, but whenever I turn it on, it says wifi dongle has been removed. Then whenever I try to connect to the portal of Toshiba, he said: no internet access, please check your network settings. When I check my network settings, it says not connected wireless device. Then a few seconds later, it connects automatically without me pressing anything

  I always click on network settings to connect to the portal.

  Anyone know what is happening here? It is so annoying to have to go into the settings of network, I want to access the portal.

  Thank you.

  This looks like a problem with the connection of the internal Wifi PCB. Suggest you to contact the hotline and ask for inspection of the material by your local Toshiba service partner.