Problem with to work with DW 5.5 server

Similar Questions

• The network connectivity status appears as only 'Local' error message ' there may be a problem with your domain name server (DNS) configuration "when trying to diagnose the problem.

  Original title: connection internet wireless Sony Vaio problems

  I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do.

  How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting Internet connectivity

  1 answer to the first and second troubleshooting Questions:

  First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside.

  2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites.

  3. If #2 is not applicable:

  a. unplug the router.
  b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
  c. wait 60 seconds.
  d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
  e. plug the router and wait until all lights are on.

  You now have an Internet connection? Otherwise:

  4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it.

  If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service.

  MS - MVP - Elephant Boy computers - don't panic!

• Problems with outgoing mail / STMP server after has worked for a LONG time...

  Recently I started having trouble with sending an outgoing message. Beyond out lickety split with no problem. Now, once I click on SEND, I get window to send the Message reading "status: connected to stmp.primus.ca...» "but the progress bar continues just to go and go and... rather than a telling me the message has been sent."

  Sometimes the email finally gets sent, after taking in "shipping time E-mail" what's FOREVER, sometimes by that email is not to all and I get the message "send message failed. The message could not be sent using SMTP server smtp.primus.ca for some unknown reason. Check your SMTP server settings are correct and try again or contact your network administrator. »

  I looked in my SMTP settings and noticed that, in aid of Primus, he said the outgoing server port is 465 while mine has been implemented (and worked for ever) 25. I have also noticed that help Primus said connectivity should be set to SSL/TLS, while that mine has been set (and has worked forever) to zero. I made these changes (first simply by changing the port #, then both) but this does not solve the problem.

  I've recently updated Thunderbird to 31.7.0 and I think that these questions CAN coincide with this update, but I am not sure of the time. If this is the case, is it possible that I could get back to the old version of Thunderbird... or move in this way another? ID of the update was not the questions, someone has an idea or an idea on why this would suddenly be a problem with Thunderbird?

  Or should I contact Primus technical support and try to sort it out with them?

  Thanks a lot for listening.

  Your anti virus got an update. We get a rash of these every time updates to Thunderbird. The cause is always an anti virus program. usually, Norton or Alvira, but they all get a mention.

• Problem with Windows Media Player: "Server execution failed" and "files needed to display video are not installed or do not work properly.

  I have a problem with Windows Media Player on laptop Lenovo G780. My laptop is under warranty (bought a month ago), but technical support Lenovo told me that the Windows Media Player program is not covered by the warranty.

  And this is a problem:

  When I click on Windows Media Player - to about 0.1 sec I see it opens and closes the window and nothing happens.

  When I select a mp3 or wmv file and right-click with the option open with Windows Media Player - I get a message: "Server execution failed" - I checked that all services with 'Media' in the name are running.

  When I select a mp3 or wmv file and right-click with the open option with Windows Media Center - Windows Media Center opens with the message: "the files needed to display video are not installed or do not work properly.

  When I select a file mp3 or wmv and right-click with option open with Windows Movie Maker life - see the video

  I tried to turn / WMP and WMC - did not help
  Tried to run as administrator - did not help
  I don't see something suspicious under events

  What can I do else?

  Thank you

  Zarek

  I had the same problem and then by chance, I tried a video on YouTube and it worked for me. Here's how I went on this issue and solved my problem:

  1. go to the computer, then OS (C).
  2. you will need to open Program Files (x 86) and Program Files.
  3. go to Windows Media Player in Program Files (x 86) and open the folder.  Then, remove the wmplayer file.  You may need to work around the error TrustedInstaller.  I'll tell you that, in a moment.
  4. in Program Files, go to the same folder for Windows Media Player and select the same file again. Wmplayer.  Copy the file in another window open.  Copy ensures that if the question comes up again you can at least try to fix it again.
  This should be the end of your problem.  If you need to circumvent the TrustedInstaller question is how:
  1. right click on wmplayer and select Properties > Security > advanced > owner > Edit > other users and groups.
  2. Enter your username and then click on check names.  Click OK.
  3. close the dialog boxes as he has requested.
  4. open again the properties and click Security.  Select your username from the list and click on edit.  From there, select full control.
  This should give you full control over the removal of the original file for WMP and easily allow you to copy the other files (x 86) programs.
  Please let me know how it goes for your problem.

• Problem with the primary dns server, get the error "There could be a problem with one or more network adapters on this computer."

  Hello

  I was all of a sudden having problems connecting to my wifi at home. When I was diagnosed, he says cannot communicate with primary dns server. I tried all methods in similar positions, but nothing works. I am also unable to connect to internet with my iphone and the itouch. It's really frustrating, because I've already tried all of your suggestions. I just ran another ' diagnose connection problems and it says the following:
  "There could be a problem with one or more network adapters on this computer." Help, please!
  Thank you!

  Thanks for your help, but I have tried this before. In the end I just unplugged my modem and plugged in again and it worked? I feel a bit silly not to try first.

• Problems with PIX 501 and Server MS Cert

  Hi all

  I have two problems with my PIX 501:

  1. registration works well. The pix has a certificate and use it with SSL and VPN connections. But after a refill, the pix certificate is lost and it has regenerated again self-signed certificate!

  Yes, I wrote mem and ca records all!

  2. at the request of ca CRL , I get the following debugging:

  Crypto CA thread wakes!

  CRYPTO_PKI: Cannot be named County ava

  CRYPTO_PKI: transaction GetCRL completed

  Crypto CA thread sleeps!

  CI thread wakes!

  And the CRL is empty.

  Does anyone have any idea?

  Bert Koelewijn

  Not sure about 1, but 2 is usually caused by the COP (Point of Distribution of CRL, basically the situation where the PIX can download the Revocation list from) listed in cert CA is in a format the PIX does not, generally an LDAP URL.

  Check the following prayer:

  Open the administration tool of CA (Certification Authority) then

  (1) right click on the name of CA and choose 'properties '.

  2) click on the tab "Policy Module".

  3) click on the button "configure."

  4) click on the tab "X.509 extensions".

  > From there, it can display the list of the "CRL Distribution Points".

  Turn off everything that isn't HTTP.

  You need to reinstall the CERT in the PIX, I think, but then it should be able to download the CRL through HTTP instead of LDAP.

• Newbie problems with getting a local server from the BFC set

  It started in another post by me about what I thought, it was a problem with port 8500. I had looked at the getting started with video CFB, and on that, he used localhost as the server name and as the host name. He then assigned port 8500 as the Port of the Web server.

  When I do that it is in the windows as stopped servers. If I try to start it the error I get is

  'Start-up localhost' has encountered a problem

  Make sure that the server is not already running or any application does not use the port of the Web server.

  So as an experience, I changed the port 80, because the admin page doesn't work in http://127.0.0.1/CFIDE/administrator/index.cfm

  The server at the bottom of the BFC window then shows a server running.

  I create a small "Hello World" index.cfm page and when I touched one of the tabs of the browser, Firefox and IE in my case, I get the following error.

  Error during preview generation:

  There is no server configured for the project myproject , to which belongs the index.cfm file. Configure a server in ColdFusion in ColdFusion server settings before you continue.

  What Miss me?

  Thank you

  Dennis

  You must specify the BFC BFC server must use in order to preview the file.

  If you need to associate a server with this project. To do this, right-click on the project-> properties-> ColdFusion server settings.

  Here in the "Server" dropdown list, select the server that you have added in CFB.

  Once this is done, make sure that your project is in the root of the document from the server in your case, that could be the Inetpub\wwwroot.

  Once this is done, the preview should work.

  -Bhakti!

  Adobe ColdFusion team

• Problem with ssl on ISA Server 2004 traffic shaping

  Hello

  I use "Bandwidthsplitter" addon for ISA Server 2004 (Enterprise Edition) for shaping traffic and quota control. I have a serious problem with it. This addon does not take into account the ssl traffic user, and I need to restart the Microsoft ISA Server priodically Control Service or allow the users to be connected via ssl until they themselves kill their session.

  I will be grateful if someone help me to solve this problem.

  Thanks in advance

  Bijan

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/Forefrontedgegeneral/threads

• problem with the ios certificate server does not update the CRL

  Hi all

  The background is that I'm putting a DMVPN solution with tunnels ipsec between the rays created by using certificates.

  I use a cisco 877 as the CA server (its 12.4 (6) T5) running to provide certificates for the spoke routers. This part works very well - rays can apply for a certificate and get a number very well.

  The problem is CA, life of LCR is set to 24 hours, but the CA is not updated the LCR so when the rays see CRL (as defined in their trustpoint) they point to a mistake that the CRL is obsolete and does not connect.

  If making a ' #sh cryptographic pki server ' it lists a ' CRL NextUpdate timer. It has a timestamp that is 24 hours after the last certificate was revocked. The only way I can get the LCR to be rebuilt must revoke a certificate.

  So, my question is, am I missing something here? I thought that it would automatically generations a new CRL list file every 24 hours.

  Can anyone help?

  Thank you.

  Hey Marc (?)

  This seems to correspond to this bug:

  CSCsy95838    AC IOS: LCR of the not updated, update timer not started

  However, it does not mention if 12.4 (6) T5 is affected, only that it was found 12.4 (15) T3 and resolved to 12.4 (15) T10 and other more recent versions.

  I suggest trying the last 12.4 (15) Tx, 15.0 (1) Mx or 15.1 (4) Mx version if you can.

  I assumed that you have much of it, but just in case: as a workaround, you can disable CRL checking on all routers DMVPN, of course they will still allow connections from routers with a revoked RADIUS.

  As (temporary?) substitute for a Revocation list, you can use a 'certificate ACL' with which you can create kind of a 'local CRL Manual:

    crypto pki certificate map certACL 10    serial-number ne    serial-number ne    etc. 

    crypto pki trustpoint myTP

     match certificate certACL
  
      (note the "ne" stands for "not equal" so you are permitting any certificate whose serial number is not listed) 

  Of course, you would have to configure (and maintain!) participating on each router in the DMVPN so it's heavy, but I guess if you revoke often certs, that it might be an option.
  HTH
  Herbert

  --

  If this post answered your question, please click the button of "right answer".

• Problem with Log in user server behavior

  1.) ok, I'll build a basic login page. I am trying to use this built in server called 'User login' behavior that comes with Dreamweaver 8 box. and I use my local ColdFusion as my server (http: http://localhost:8500 /). I have a Table in an Access database called Employee. Basically, I built a registration.cfm page that allow the employee the opportunity to register. Two of the fields on my registration page are called obviouly "username and password". When the employee enrolled, this information is inserted in the Employee Table. It works very well because I checked simply by opening the table in Access to verify that the data were inserted correctly in the fields after that I joined a fake employee.
  
  2.) now to the login.cfm page that seems to be the problem. Two fields on this page. username and password... These are obviously linked to the username and password fields in the Employee Table. "When I get the username and password that I registered with I must be addressed to index.cfm if the validation is successful and if it does not then the login.cfm page should update with an error message valid' valid username and password (for now). the works of the defective part. The problem is alhtough b/c work every time THAT the data that I registered with is in the Employees table, as I said earlier, I'm never able to connect. This is true for all the false emplyees I recorded with so far. If it helps, I do not use AccessLevels option in my page login.cfm, only the user name and the password. That is to say here are my values, when I click on the "Log In User" dialog box when I chose this server behavior:
  
  Getting the form entries: LoginForm
  Username: username
  Password: password
  Validation using the source: connDorknozzle (my datasource)
  Table: C: / Dorknozzle.Employee
  Column of user name: user name (this is what they are called access)
  Column of password: Pass (this is what they are called access)
  If the connection is successful, proceed to: index.cfm
  If the connection fails, go to: login.cfm
  Restrict access based on: user name and password (checked)
  
  I also am attatching the code on this page below...
  
  
  
  
  Help! It does not work

  Bad HA... This article explains everything. Basically, if you want to use this behavior, you create a file called Application.cfm and place it in your directory with a minimum of code tree. Something to do with the Session Variables.

  See this article from docs direct: http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16564

  Minimum amount of code, you must have in this Appliation.cfm file is the following:

  Otherwise the user serverbehavior log is useless.

• problems with the IPCC monitoring server port

  I have 4.0 (4) IPCC Express Premium with Call Manager 4.1 (2). I have a server with two NIC a 'normal' IPCC and other oversight bodies. I have configured the port monitoring with a few other IP (172.16.255.10/24) and I set up RSPAN on switches. I see a call between officers and the appellants.

  But, after a reboot of the server, I get the error that my server will stop after a minute. I cann't see ane packages from monitor port. When I disable the port monitor and restart the server everything is OK and then I can activate the monitor port and everything is OK.

  I have nothing in the registry settings.

  What should do?

  Thank you

  I had the same problem as you and this has solved my problem.

• Problems with the easy VPN server

  I have configured my 1841 with IOS 1841-advsecurityk9 - mz.124 - 4.T.bin.

  It is a piece of config:

  AAA authentication login userauthen local

  AAA authentication login sdm_vpn_xauth_ml_1 local

  crypto ISAKMP policy 1

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  life 300

  !

  ISAKMP crypto client configuration group vpnipsec

  Cisco key

  XXXXX of the DNS

  pool ippool

  !

  Crypto ipsec transform-set xxxxx

  !

  crypto dynamic-map SDM_DYNMAP_1 1

  security-association the value idle time 300

  game of transformation-ESP-3DES-MD5

  market arriere-route

  !

  card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1

  map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto

  client configuration address map SDM_CMAP_1 crypto answer

  map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto

  point-to-point interface ATM0/0/0.1

  Description ConnessioneADSL

  IP address 82.185.xx.xx 255.255.255.248 secondary

  IP address 88.33.xx.xx 255.255.255.252

  NAT outside IP

  IP virtual-reassembly

  map SDM_CMAP_1 crypto

  PVC 8/35

  !

  Is the error I get via the CVPN Client

  52 10:46:41.936 01/31/06 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">

  And what fails.

  Any sugestion?

  Thank you

  Hello

  You can try to connect to 88.33.x.x instead of 88.185.x.x ip ip?

  We had similar problems a bit when we were trying to establish the same thing with the secondary ip address and has resolved once we changed it to the primary ip address...

  regds

• Problem with the 1.7 Server Update utility?

  Hello

  A colleague tries to run the 1.7 SUU on a Dell 2950 ESX version 3.5 running, the utility seems to work beyond the point showing "System is consistent with the preconditions", but then just exits and returns the word "Null".

  Someone at - he observed this behavious and might perhaps suggest a work around?

  Thanks for reading,

  Adam

  Message edited by AdamTRH on 06/24/2008 07:50
  
  

• problem with integrated start weblogic server

  Hello world
  I used jDeveloper 11.1.1.6 and used to run my applications (JSF pages) without any problem
  But today I faced the following error when I tried to run an application by integrated weblogic server:
  
  from weblogic with the Java version:
  Java version "1.7.0_02".
  Java (TM) SE Runtime Environment (build 1.7.0_02 - b13)
  Java for 64-bit Server VM (build 22, 0 - b10, mixed mode)
  WLS starting with line:
  C:\PROGRA~1\Java\JDK17~1.0_0\bin\java-Xms256m-Xmx512m - XX : MaxPermSize = 1024m-Dweblogic.Name=DefaultServer-Djava.security.policy=C:\Oracle\Middleware116\wlserver_10.3\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=C:\Oracle\Middleware116\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true-da-Dplatform.home=C:\Oracle\Middleware116\wlserver_10.3-Dwls.home=C:\Oracle\Middleware116\wlserver_10.3\server-Dweblogic.home=C:\Oracle\Middleware116\wlserver_10.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=C:\Oracle\Middleware116\oracle_common-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=C:\Users\eslami\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~ 1-Djrockit.optfile=C:\Oracle\ Middleware116\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=C:\Users\eslami\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=C:\Users\eslami\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=C:\Users\eslami\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=C:\Users\eslami\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=C:\Users\eslami\ AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\ config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=C:\Users\eslami\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\servers\DefaultServer\tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=C:\Oracle\Middleware116\oracle_common\modules\oracle.ossoiap_11.1.1,C:\Oracle\Middleware116\oracle_common\modules\oracle.oamprovider_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=C:\Users\eslami\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\oracle\store\gmds-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole= weblogic. Server
  Error: Could not find or load the class main weblogic. Server
  Process is complete.
  
  could someone help me with this problem?
  Thank you so much.

  Hello

  System folder: http://tompeez.wordpress.com/tag/system-folder/

  Change the setDoaminEnv (bat / sh - depending on your OS) and change the JAVA_HOME accordingly.

  Arun-

• Problem with driver installation Home Server

  ^{Yet another question!}

  I had a bad day with ESXi today, nothing worked and I am still to get a guest OS installed and work after hours of banging my head against the server.

  I am trying to install Windows Home Server, I have a bootable DVD for it, but it fails with the error:

  "hard disk capable of hosting windows home server is not found."

  After Googling, I find that I need to download a SCSi driver and put it on a floppy disk.

  First of all, my floppy drive on my client did not work so I went along to a neighbor, he had no one, so I then drove to my nearest neighbor who said he had a working floppy drive.

  File: ESXi_WinXP.flp is too large to fit on the disk! It didn't matter what we tried it wouldn't fit. Then we researched on the VMWare site for another driver, but it was too big for a floppy as well.

  Where I am goingwrong and why is it so difficult (for me)

  Thank you, again.

  you have really no need put one flpppy image btrue diskette - you can point the flp on shared storage image - as you do an ISO for cd rom image.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Problem with URL localhost Web Server page

  I can not open my Web server via the browser page, but he had a different address when I click it?

  When I click on it it gives me:

  file:///applications/XAMPP/xamppfiles/htdocs/mytestwebsite%20/index.htm

  If I want to open it, it should be sufficient to write:

  localhost/mytestwebserver/index.htm

  or should I write more about after "localhost".

  Thank you

  You named your file mytestwebsite with space at the end which turns into URI mytestwebsite % 20. You must delete the space between the name of the folder or try to use localhost/mytestwebserver%20/index.htm or create the virtual host.