Problem with USB mouse

Similar Questions

• Problem with USB mouse on satellite a215-s7416

  Hi all. I have had this problem since I got this computer in December. I hope someone can help me.

  I've been using an optical mouse wired usb. It works for about 4-5 weeks then it loses power. For the first days I can unplug and plug again and it works again. If I change the ports that it works as well. Finally, it stops completely, in all ports. I have plug into my office and it works fine. The first time it happened that I exchanged the mouse thinking it was defective. As soon as I plugged the new mouse it worked fine. After a few months ago, I switched to another brand of mouse. I still have the same problems. I found some info on removing USB hubs and support resettlement, which worked for a few days. I've also updated the BIOS, I did not well other updates.

  Anyone know what can be the cause of this? I'm going to exchange it again tomorrow and I am confident when I plug it in it will work fine.

  I saw a similar problem on a desktop PC, it was caused by bad drivers of USB.

  Have you installed drivers mouse Logitech or Microsoft, or any other associated USB drivers?

  Try to remove those, whether they are in conflict with the mouse.

  If this does not work, you can try to reinstall Windows by running the recovery (backup your data first of course: p)

• Problems with USB mouse

  Hello

  I've seen similar reports listed who are about a year or so old at this point.  I wanted to post my question, as is currently the case.  I have a HP Pavilion DV7 with Windows 7 and a processor Intel Core i7-2670QM CPU @ 2.20 GHz, Mhz, 4 Lossnay 2201, 8 logical processors and 4 GB of RAM.  I use an external mouse (I don't like trackpads) and my mouse keeps a malfunction.  It will seem like it disappears from the screen in any way endangered and take about 15 or 20 seconds to return it will also block on the screen and not move and other times it will not move in the right direction.  Sometimes she will go from one side of the screen and change from an arrow to a glove.  This is happening with the wired mouse and wireless and no matter what brand is the mouse.  I did some research online and there was a response on a forum of HP who seem to speak exactly to my problem where the HP employee advised the person to update their BIOS, so I was having no impact on the problem.  I also completely keep up-to-date with all the updates from Microsoft.  It's driving me crazy because I use my laptop a lot.  One last thing - I still have to find forums with this problem which had a solution.

  Any suggestion would be appreciated.

  Original title: external USB mouse keeps locking

  Hello

  Did you do changes on the computer before the show?

  I wish that you read the following article and follow the suggestions in the article.

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-CA/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• Problems with my mouse, and have not been able to find a solution to the research on various forums.

  Original title: mouse problems

  I have problems with my mouse and have not been able to find a solution to the research on various forums. Here are the symptoms:

  1. you must click several times to get the menus to open. Sometimes they are not just and sometimes they open with a single click flash but do not stick until I clicked several times.

  2 several times the menu drop down and seem to become transparent (not in looks) because when I click on something on the menu, he actually selects everything that is behind the menu drop down. For example, if I'm in powerpoint and you select an item in edit mode, it might work and here again he can just select the slideview behind the menu and expand. Or well, if I'm on a Web site, such as Facebook, and I chose to close the session, rather than enable the disconnection of the key, he chooses some ad is behind the part of the menu and redirects the page of this Web site.

  3. when I try to select a Word, words or sections as paragraphs, it performs several different things: continually select as soon as I let go of the mouse button, the jumps of color selection in another part of the document, or deselects the part of the text before I even let go of the mouse button.

  Here is what I tried:

  1. I had originally a usb wireless mouse. I changed the batteries and then got a new. Now I use a wired mouse.

  2 make sure all updates for Windows and Office 2010 are updated.

  3 has tried to update the drivers mouse, says that it is up-to-date. He restored, did not work. Uninstalled and restarted.

  4 Ran Windows Security Essential and Malwarebytes - found nothing.

  5. ensure that all the Toshiba updates were up-to-date.

  I don't know how the word this issue properly in order to find information about it. Everything I typed in search engines brings me other problems unrelated to this one.

  I am running W7 64 x Home Premium SP1, SP2 MS 2010 with a mouse Dell; Toshiba Satellite C655

  Well I have stumbled on the fix... looks like there was a problem with the HID-compliant mouse. The convenience store hardware detected and solved the problem. Everything seems to work properly again.

• Problems with the mouse scrolling

  I have a Microsoft Wireless Mobile Mouse 1000 that I use on my laptop Dell Inspiron N5110 with Windows 7 Ultimate 64 - bit installed on it.

  Recently, the mouse wheel is crazy I've put it down it scrolls to the top, scroll down, done both or nothing. and this only happens when scrolling down, there is no problem of scrolling upward.

  I changed the USB port - in which I put the receiver - the only one directly attached to the motherboard. That gave me minutes of scrolling perfect without problem, but after having tried other ports he went crazy again.

  I tried to uninstall the driver from Device Manager and then put it back, but to no avail (I did for several ports)

  I should note that the problem itself is fluctuating, which sometimes means that the wheel is crazier than others and I tried the mouse on another laptop and the problem does not occur.

  Thanks in advance.

  Original title: Wireless Mouse 1000 - wheel had crazy

  Hello

  You did changes to the computer before this problem?

  I wish that you read the following article and follow the suggestions in the article.

  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091/en-us
   
  Hope this helps, if the problem persists with Windows updates, please get back to us. We are here to help you.

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• Problem with USB HUB using Windows 7 on Bootcamp

  I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

  Hello

  I suggest you to see link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I also suggest you to contact the apple support and check.

  http://www.Apple.com/support/

• I have a problem with the mouse on the computer.

  Original title: the mouse is runging autour

  Help

  I can't control my mouse
  He does things on his own

  Hi Zooitje,

  Thanks for posting your question in the Microsoft Community.

  From the descriptions of the question, it seems that you are facing problems with your mouse.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  To help you solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer and the mouse?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. you receive an error code or message?

  I suggest you run the troubleshooter and update the drivers by following the steps in the link below and check the issue.

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab04

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

  
  

• Satellite C650 problem with USB ports

  Hello

  I have a problem with my laptop, with my USB ports.

  A few days ago, I plugged my mp3 to charge its battery. I did when system Windows began and after a few ports seconds has stopped working. They work for one to five minutes after starting my computer, but only after my laptop's turn off for a few hours at night for example.

  They work fine and all of a sudden we hear the sound of a disconnected device and usb ports turns off. I tried many solutions but nothing worked. I removed all the USB ports in Device Manager.

  I checked in the BIOS, but everything seems to be okay. I tried to disable the disconnection of usb ports to save energy, nothing. Tools that have been provided by Toshiba to check hardware see as usb ports work correctly. Only usbdview program sees as unknown device, I tried to uninstall it through this program but still nothing.

  You have an idea, what could happen? Or if there is no possibility to fix without service visit?
  I would appreciate your help.

  Hello

  Have you tested these ports USB plug a USB mouse or a USB keyboard?
  These devices work properly?

  I don t think you need a visit to the service.
  I think that it s just a software problem
  Given that the USB ports are controlled by the chipset, I would recommend reinstalling/updating the chipset driver

  The alternative is a bit drastic, I think about the recovery of the laptop...
  It might be possible that the registry has been confused upward or some 3rd party software preinstalled on the laptop could affect the USB ports.

  I remember that my USB ports do not work after installing iTunes.
  I had to reinstall the operating system once more to get the USB port work even more funny is that I installed iTunes once more and USB worked correctly

• Problems with the mouse.

  On my Acer desktop / laptop, I can't remember the serial number or anything like that, but there is a touchpad mouse which I never use. I have a USB key with a "mouse in hand" that I use.

  Saturday evening closed pc cause lack of power. Sunday morning I gave him power, and he began.

  But when you go to the screen "" with applications (windows 8.1) started at the right end. Trying to get to the left of the screen I could do with the USB mouse, but when I left hand letting it got automatically to the right again.

  It's lying, that I could not work with applications to the left (or go to the app store or anything.)

  I tried "Control Panel" and click on "programs". All programs has been more than on a single screen.  And I started at the bottom. Try it with the mouse or the "arrow" s goes up, when I let go I come down to the bottom again.

  Anyone here know if mice "touchpad" do something bad?  Or a USB mouse?  Or a sick computer?

  Sorry for my English - computer is English not my best. Hope someone out there can understand and solve my problem.

  PC was purchased June 2014, so I have the warranty, but do not miss my computer for a long time :-)

  Greetings to all

  Peter

  It was my logitech mouse that didn't work

  Bought a new and now all works

  :-)

  Peter

• I AM NOT the LIVEDOCK HELP because of a quality problem with USB keyboards, you can fix it?

  I have a Xperia Arc and I bought an accessory DK10 and I try to use a USB mouse and USB keyboard with it, , but I'm not able to change the language of the USB keyboard-.

  It is a problem of QUALITY because that this limitation is not announced with the product.

  For this reason, I'M NOT to the HELP of LIVEDOCK.

  Y at - it a possiblity that solve you this problem? (for example, by using the language settings and the keyboard of the phone that will use Android)

  This will help many users who do not use U.S. English keyboards.

  I write in this forum because I could not any kind of help in the chat support or support by mail.

  At the time Android supports only English keyboard using an external keyboard, but I know that our developers are looking into this and try to add other provisions of keyboard as well.

• problem with USB driver in windows 8

  I use winsows 8 in hp probook 4440 s with processor i3.  Recently I have a problem with my usb ports 3. they do not react like usb 3 and most of the time does not at all. I looked for a host controller driver expandable usb 3 for windows 8, but can't find anywhere because it is built with windows 8. Where can I find the driver or what can I do now?

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. The drivers are from HP. update the BIOS, chipset and the major
  device drivers embedded and separate that may affect the USB.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  Update driver and troubleshooting details (don't forget to check for BIOS, chipset,

  (and other drivers):

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
  the BIOS, chipset of low level driversand the major device on-board and separate
  drivers. Execute DriverView - value VIEW drivers Microsoft hide - updated from those
  without drain to their name.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP 255 g4: problem with USB and SM Bus controller

  I have a problem with the (USB) Universal Serial Bus controller and SM Bus controller.
  System identifies them.

  
  I installed all the drivers for my noutbook of this site, but it does not work...
  Please, help me!

  I believe that these devices are based on the AMD chipset driver package... USB 3.0 and SMBus Controller:

  http://support.AMD.com/en-us/download/chipset?OS=Windows%2010%20-%2064

  Top package. @Paul_Tikkanen will know for sure.

• Satellite P300D-14F - problem with USB

  Hello

  I want to make a USB to boot, but the laptop does not recognize (I mean in the bios)

  For example, when I connect the external hard drive (1 TB, Hitachi HDT721010SLA360) I can see it in the Start Menu (http://s017.radikal.ru/i432/1202/20/b7b7edd221f9.jpg)

  But when I connect my USB drive (Transcend JF V30 / 4Gb, JetFlashTS4GJFV30) I have not even USB option in my Menu of Boot (http://i021.radikal.ru/1202/67/6bae3812f88c.jpg)

  Have problem in my USB?
  If so, could you please tell, what are the usb key properties must work properly, so that I could do the usb startup key.

  P.S.: on the first time 1 TB of HDD and USB connected photo (also connected SAMSUNG HD501LJ 500 GB), the second peak connected the USB _only_

  Hello

  To my knowledge, it there has not of special requirements to the USB flash key, a common USB should be recognized correctly as boot device.

  Of course, it might be possible that there is a problem with your USB key
  On the other hand, it might be possible that your USB drive is not formatted correctly.

  I think you need to format the Flash DRIVE to FAT32 standard and need to make it bootable.
  If this does not help, try another USB flash memory.

  Good luck