Problem writing to DVD help

Similar Questions

• Satellite A30 - problem writing to DVD

  Hello

  I bought a Toshiba A30 (PSA 33F) satellite some time ago and have just tried to burn on a dvd, but it is not being seen by the dvd-r/rw. So, I get a message that there is no cd in the drive.
  But I can burn CD but not dvd.

  It will play dvd movies, but the play/stop/pause buttons ETC don't work.

  I tried deleting the Device Manager but has not solved the problems.

  Search the Toshiba web site that says I must install the driver ram dvd but who did not.

  Any advice welcome.

  Hi William,.

  Can you confirm that your A30 has a DVD burner? My Satellite A30 came only with a CD burner (a TEAC DW224E) so I had to replace it (with a CARPET * A UJ825) in order to burn DVDs.

  HTH

• Problem writing DVD SD 6112

  OK, my DVD burner in my notebook SA30-404
  seems to be only able to write some
  really not expensive DVD-media brands.

  Where can I find which DVD, it will burn at?
  I've already bought two piles of 25 discs
  for nothing, because they do not work...

  Supported dvd-brands and media or types
  aren't anywhere to be found in the documentation.
  "use only dvd media supported by toshiba."
  YES THEN? WHERE ARE THEY?
  Really stupid if you ask me.
  Cost us a lot of energy and time and money wasted.

  Hi jult

  Media supported by Toshiba are probably tested media and they should be available in writing without any problem. Check this http://www.tdk-europe.com/index.php?id=34&sa_from=56&WYSESSID=pecthjsutge5g7 hup5t99epib1.
  I can really recommend to use.

  You are not required to use the media. I use just the TDK media for a long time and I am very satisfied. Have two cell phones and two of them have no problem to burn DVDs at all.

  Good bye

• Problem writing A60-672 DVD with nero express 6

  I have a SD-R6112 dvd burner and you have installed Nero express 6 software, the system recognizes the material and can see the drive DVD - RW preforms formatting, burn data but no data is transferred and the disc remains empty, I received the following error message
  help "cannot mount the drive.

  Hello

  had the written DVD burner has / this document to the DVD - RW format before this error message appears?

  Do yu have the opportunity to try an other DVD - RW another provider for testing? It may be that some DVD writers have problems with some DVD providers! In this case you will need to test what media is the best for your burner.

  Otherwise, you can also see if you find any means recommended to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

  Goodbye Chris

• Problem with still DVD CS6. Cancellation writing disc

  Hello. I need help - I have a problem with Encore DVD CS6. When the DVD disc is written the end of the process program cancel displays this text: "Still could not complete the operation due to an error in hardwar (detection code 40902)" it is in mac os. In windows, the problem is the same but the detection code is 300200. What is it?   Disk space is sufficient.

  As a test, generate an image rather than burn them to a disc.

  Sense errors are usually, but not always material.

  You use the same drive (external?)? Are you using the same disks? (Sense code errors can be disks.)

  Many of us don't burn ever with still, using ImgBurn for PC or for Mac toast.

• Satellite P10-304: the problem writing and erasing CD - RW discs

  Some need help pls. I own a Toshiba satellite P10-304 with a combo player SD-R2412 installed. When I try to burn a new CD - RW, it does ok, but wouldn't allow no other written on the same CD in another session. The written CD - RW is then recognized as a CD-ROM. In addition, it is not possible to erase the cd - rw usinig this player. When I take the cd written for my laptop office of deletion, as it's done with success and my toshiba can then burn again. Any ideas on what to do?

  Additional information: laptop computer came bundled with "drag n dro cd" but I had to install Roxio and even tried the cd writing software provided with windows XP are done everything to nothing. I checked the 'advanced system info-error log' and the report there is 'the device, \Device\CdRom0, has a bad block'; I don't know what that means.

  Cheers.

  Nthunderbolt

  Hello

  In my opinion, it's probably caused by software. In my opinion, you should remove all burning software and verify all burning functions with windows option. After deleting some software, it can happen that, in the registry editor it is a lot of waste that will not be removed completely.

  In any case, delete all the burning software, and you can also try to remove the device from Device Manager DVD. Restart the laptop and DVD should be detected and installed correctly. Try using the option of engraving of Windows and if there is still problem writing once again please.

• Satellite P30 turn off - also problems with burning DVDs

  Hi Please help me.
  I had a row with my brother and it won't help.

  My Pc is only a year old and it turns off. I would say it was because of overheating, but he just did and it isn't really that hot.
  I put on the books, not on my knees, keep him away heat, crash back to the desktop.
  It makes me crazy, please, any help or advice or anything like that would be a great help.

  I also have problems with my dvd burner, always, he gets to about 17% and said that there is a mistake, thought it was the discs but surely it can be all 100 of them, I tried turning on and off but no use.
  Also the advice would be great!

  Please help a girl in need of a working Pc! Who does not know a lot of technical stuff!

  Hello

  Overheating problems usually occur because the cooling module cannot work properly.
  Fans are unable to work because of the dirt and dust inside the laptop.
  The best way to clear the fans is to use the vacuum cleaner.

  On the problems of DVD writer: well, it's not easy to say why it happens. Have you checked media dvd from different manufacturers? Many CD/DVD media works differently, and you should check it out.
  In addition, there is a problem with the burning software. I put t know what application you're using, but you should try to use Nero. It's very nice software and I m very happy. Check it out

• Satellite M40-112: writing of DVDs takes long

  Hello, my friends, I have a Satellite M40-112 who bought 4 months ago. Now I have problems with my DVD-Ram, the writing of 4xDVD-RW, or 4xDVD-R of a volume of 4.3 G takes normally more than forty-five minutes, sometimes an hour. The transfer of data on DVD - RW or DVD-R the same volume also takes similar time. During this time, the CPU rate amounts to 100% occupancy when write or read DVD-RW/r. I tried the same jobs on my friends series Satellite L20, the average CPU occupancy rate was normally only 10 to 20%. Some experts could give me your ideas or suggestions treasurous? Thanks in advance.

  Hi my friend

  It's very strange. One of my friends has the same unit, we created a few DVD movies and burning procedure is much faster. I put t know what burning software you use, but please check if called simulation is selected. If so disable it.

  Good bye

• I run windows xp on HP Pavilion 750, in the past, I have not had a problem writing to the pictures from my computer to a disc

  I run windows xp on HP Pavilion 750, in the past, I have not had a problem writing to the photos from my computer on disc.

  It now written up so I get a message cannot keep any body can help please.

  original title: problem writing Photos...

  I'm sorry, but I don't have a solution for you.  You can check the Device Manager (start > run > devmgmt.msc > OK) to see if there are warnings next to your CD burner.  If there is a caution icon, double-click the entry and see what it says under "device status".

  I don't know how you use picture & Fax Viewer to burn a CD.  The usual method, except if you have 3rd party CD burning software, is to use Windows Explorer.  This is what Windows XP Help & Support has to say on this topic:

  To copy files and folders to a CD

  1. Insert a blank, writable CD into the CD burner.
  2. Open my computer.
  3. Click the files or folders to copy to the CD. To select multiple files, hold down the CTRL key while you click the files you want. Then, under file and folder tasks, click copy this file, copy this folder, or copy the selected items.

     If the files are located in my pictures, under management of images, click copy to CD or copy all items to a CDand go to step 5.

  4. In the dialog box copy items , click the CD player record, and then click copy.
  5. In my computer, double-click the CD burner. Windows displays a temporary area where the files are held before they are copied to the CD. Verify that the files and folders you want to copy to the CD appear under files ready to be written on the CD.
  6. Under CD writing tasks, click write these files to CD. Windows displays the Assistant burn a CD. Follow the instructions in the wizard.

  Notes

  • To open my computer, click Startand then click my computer.
  • Do not copy more files to the CD that it will hold. Standard CD hold up to 650 megabytes (MB). Large capacity CD contain up to 850 MB.
  • Don't forget that you have enough disk space on your hard disk to store the temporary files that are created during the CD writing process. For a standard CD, Windows reserves up to 700 MB of available disk space. For a high-capacity CD, Windows reserves up to 1 gigabyte (GB) of the available free space.
  • After you copy files or folders to the CD, it is useful to view the CD to verify that the files are copied.

• Having a problem with my DVD player with regard to media playback

  Hello

  I have recently had problems with my DVD ROM read drive media correctly, when I put in a computer game (lets say Star Craft 2 as an example at random) Autorun makes me up some options and says it's an image and request either 1.) Open the files and view them, or 2.) See all photos in Windows and some other similar options.
  It will not recognize the game as a game and will not bring up the menu to install the game or whatever it is, sorta solve this problem I put the automatic run settings so that it opens files in the photo (since it is the software game image processing) and once he opens the folder I click on the installation program manually.
  I checked my driver to ensure that it is up-to-date.
  For any help or suggestion will be welcome.

  SOLVED!

  I found out with a little research it was Vista blocks the autorun.inf files in games and keep them to read and run the .exe files automatically and so he held a photo, thank you for the help and suggestions.

• Problem creating Windows DVD

  I'm having a problem with Windows DVD Maker.  After the DVD was burned, the menu pictures and video clips are on half top of the screen and it gives a green bottom half of the screen.  When I preview before I actually burning the DVD, it looks great, but after that the DVD is burned, it flattens the peak to the top of the screen.  I tried changing every setting in there, but he continues to squeeze the image in the menu at the top of the screen.  The DVD is very good, but the menu is messed up.  Any help would be great.  Y at - it a update or something that could help solve this problem?

  I'm having a problem with Windows DVD Maker.  After the DVD was burned, the menu pictures and video clips are on half top of the screen and it gives a green bottom half of the screen.  When I preview before I actually burning the DVD, it looks great, but after that the DVD is burned, it flattens the peak to the top of the screen.  I tried changing every setting in there, but he continues to squeeze the image in the menu at the top of the screen.  The DVD is very good, but the menu is messed up.  Any help would be great.  Y at - it a update or something that could help solve this problem?

  ================================================
  No guarantee... but... the info copied on the net... may be useful:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My Dell laptop refered me KB871122 to fix the WiFi feature. I don't know how to solve this problem. Could someone help me solve this?

  My Dell laptop refered me article 871122 # to fix the wifi feature. I don't know how to solve this problem. Could someone help me solve this?

  Thank you and have a great day...
  original title: Internet connection via wireless network

  Hello

  • What were the changes made before the issue started?

  You can view these methods:

  Method 1:

  Please see the steps that are provided in this link:

  http://support.Microsoft.com/kb/871122

  Method 2:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• laptop is not reading/writing cd/dvd

  My laptop is not reading/writing CD/dvd

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to follow the steps from the links and check out.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Problem playing Movie DVD Maker

  "Movie Maker" to burn the DVD in the past. Everything worked fine and still play DVDs without problem. Manufacturing DVD now works fine all the way including "Overview". The burn process ends, but when I play the DVD (will play on any player) the video compressed on only half of the screen (horizontally) the bottom half is green. 'Menu' executives are also screened. The audio is good. Reset the filters 'default', but still have the same problem. Any ideas?

  Thank you for your response. On further investigation, I found that if the files have been marked ".avi", they were actually converted 'Divx' files. Used a program that can handle Divx files and dvd has proved that the fine. Again, thank you for your response.

  JC

• SOLVED problem with my DVD/CD _

  Hello

  I have a problem with my DVD/CD. Although Device Manager says, "this device works properly.". It does not at all.

  I'm very suspicious of the cable connections. The cable has been severely pinched by my grandson. It did not close, and instead to find the cause, he forced its closure.

  So what I want to know is if I can buy the cable online and install it myself.  I have searched but cannot find a place to buy one, and although I searched on the Dell site, I couldn't find anything there either.

  Thanks for reading...

  Inspiron 5721

  Op - MS Windows 10 Home system

  Intel Core i7-3517U

  BIOS - Legacy mode

  RAM - 8 GB

  Name TSSTcorp CDDVDW SE-208DB USB Device

  I appreciate the responses and suggestions.

  I finally got my problem solved by replacing the CD-ROM unit.  I was lucky enough to get an opportunity from a computer at a price store very low. If all goes well.

  Thanks again to all.